Related
Hey everyone, First time poster here and it seems my captivate is bricked. I'm fairly new to android but I caught on with ROM/kernel/etc.. flashing and all seemed to be going well. I saw the new 3.5 update for precision and wanted to update from 3.0. I did my usual thing and restored to stock with ODIN instead of flashing over. Rooted all over again, downloaded ROM manager and flashed clockwork recovery. I selected the ROM when I was in CWrecovery and rebooted.. but for some reason the phone never gets past the boot screen. The ATT logo shows up, then the suckerpunch logo (as suckerpunch is included in the precision ROM) and then the precision logo.. but it just keeps starting over from there. I thought I did a clean flash but something went wrong obviously.
Ive tried the three button combo and anything that has been stated before on here about the three button combo timing and whatever. So it seems that I cant get in recovery or download by using the traditional methods.
I'm guessing my phone is soft-bricked, which should be relatively easy to fix, but I can't get into any mode at all. Ive seen plenty of threads with people having boot loop issues but they seem to have been solved my some combination of buttons used or the ODIN usb download mode technique. Ive seen mention of using adb commands to get into download mode, but I think I have to have usb debugging enabled which I can't enable, clearly.
Any help would be appreciated, especially since in the meantime I'll have to use my old 903sh.
CCDillon said:
Hey everyone, First time poster here and it seems my captivate is bricked. I'm fairly new to android but I caught on with ROM/kernel/etc.. flashing and all seemed to be going well. I saw the new 3.5 update for precision and wanted to update from 3.0. I did my usual thing and restored to stock with ODIN instead of flashing over. Rooted all over again, downloaded ROM manager and flashed clockwork recovery. I selected the ROM when I was in CWrecovery and rebooted.. but for some reason the phone never gets past the boot screen. The ATT logo shows up, then the suckerpunch logo (as suckerpunch is included in the precision ROM) and then the precision logo.. but it just keeps starting over from there. I thought I did a clean flash but something went wrong obviously.
Ive tried the three button combo and anything that has been stated before on here about the three button combo timing and whatever. So it seems that I cant get in recovery or download by using the traditional methods.
I'm guessing my phone is soft-bricked, which should be relatively easy to fix, but I can't get into any mode at all. Ive seen plenty of threads with people having boot loop issues but they seem to have been solved my some combination of buttons used or the ODIN usb download mode technique. Ive seen mention of using adb commands to get into download mode, but I think I have to have usb debugging enabled which I can't enable, clearly.
Any help would be appreciated, especially since in the meantime I'll have to use my old 903sh.
Click to expand...
Click to collapse
Can you describe exactly which three button methods have you performed? The one that always seems to work to get to download mode is hold both volume up and down and plug in USB cable to the computer and you should be able to get into download mode (of course after taking out the battery, shutting off your phone first). You should have ODIN open before this, then after that just press start on ODIN.
I believe people with captivates who have problems with 3 button combos have batch 1008. Please tell if you can't use the method above then we can check your batch.
koreancanuck said:
Can you describe exactly which three button methods have you performed? The one that always seems to work to get to download mode is hold both volume up and down and plug in USB cable to the computer and you should be able to get into download mode (of course after taking out the battery, shutting off your phone first). You should have ODIN open before this, then after that just press start on ODIN.
I believe people with captivates who have problems with 3 button combos have batch 1008. Please tell if you can't use the method above then we can check your batch.
Click to expand...
Click to collapse
I appreciate the fast response.
Ive tried the above method and it didn't work. Ive also tried plenty of others like holding the power button with the two volume buttons (to try recovery) Ive also held the buttons down for certain amounts of time to see if my timing is just off, and pretty much a few other generic three button combos that are performed when this sort of thing happens. Instead of getting into download mode, it of course just shows the battery charging.
If the phone is plugged in while it is doing its rebooting cycle then ODIN actually detects it, but I still wouldn't be able to do anything I'm sure.
Ive read through many posts about this but I just cant find anything to work at all, maybe buying a jig would be the final solution. :/
EDIT: If it helps, before flashing my captivate for the very first time a month back, i was told to check to see if I could enter into download mode and recovery safely, which I could and this was on stock rom. Ive been able to get into download/recovery with other ROMs as well, idk what's up now though
CCDillon said:
I appreciate the fast response.
Ive tried the above method and it didn't work. Ive also tried plenty of others like holding the power button with the two volume buttons (to try recovery) Ive also held the buttons down for certain amounts of time to see if my timing is just off, and pretty much a few other generic three button combos that are performed when this sort of thing happens. Instead of getting into download mode, it of course just shows the battery charging.
If the phone is plugged in while it is doing its rebooting cycle then ODIN actually detects it, but I still wouldn't be able to do anything I'm sure.
Ive read through many posts about this but I just cant find anything to work at all, maybe buying a jig would be the final solution. :/
EDIT: If it helps, before flashing my captivate for the very first time a month back, i was told to check to see if I could enter into download mode and recovery safely, which I could and this was on stock rom. Ive been able to get into download/recovery with other ROMs as well, idk what's up now though
Click to expand...
Click to collapse
If you could get into download before, I don't know why you wouldn't be able to do it now. The fact that you can see the battery charging icon indicates that you should easily be able to get into download mode. Can you double check your methods and if neither work, you could always go for JIG.
you may need to buy this to get into download mode:
http://cgi.ebay.com/ws/eBayISAPI.dl...69977&ssPageName=STRK:MESELX:IT#ht_623wt_1139
just to clearify and add one more thing to try...
you are experiencing a boot-loop not brick..
ive heard of boot loop problems sometimes getting into download mode by:
remove battery
plug in usb
hold volume buttons
put in battery
(slight change on usual method)
EDIT: you may also want to try the AIO captivate toolbox in the Dev section, it can try to put your phone into download mode
I had this happen before. I did what Tresselo said and it worked.
Sent from my SAMSUNG-SGH-I897 using XDA App
plug in your usb cable. let the phone reboot and see if the comp recognizes the phone at any point during your boot loop. if it does - your in luck, sort of... I had this problem as well with the same ROM. idk if its the ROM or just me screwing up (probably me screwing up) anyhow, type this command into a command prompt (must have the android sdk and adb installed) get into the tools folder where ever that may be at for me its C:\android\tools
from this dir type this: adb reboot download - do this as soon as the comp recognizes your phone - should work.... IF the comp is seeing the phone. If its not you WILL need a JIG which can be made fairly easy.
Try adb if you haven't already. Instructions are in the stickies in the Dev section.
Sent from my Captivate using XDA App
Thanks for all the replies guys, got a good community here. Sadly no suggestions have worked at all.
jgc121 said:
plug in your usb cable. let the phone reboot and see if the comp recognizes the phone at any point during your boot loop. if it does - your in luck, sort of... I had this problem as well with the same ROM. idk if its the ROM or just me screwing up (probably me screwing up) anyhow, type this command into a command prompt (must have the android sdk and adb installed) get into the tools folder where ever that may be at for me its C:\android\tools
from this dir type this: adb reboot download - do this as soon as the comp recognizes your phone - should work.... IF the comp is seeing the phone. If its not you WILL need a JIG which can be made fairly easy.
Click to expand...
Click to collapse
I downloaded the android SDK and installed all the necessary components, as soon as I hit the right directory (for me C:\Program Files\Android\android-sdk-windows\platform-tools>adb reboot download) and I get "error: device not found". So adb seems to be running right and I may just have to get my timing right, but as of trying a good ten times I'm not having any luck.
When booting up my cap while plugged into the computer, the noise that signals a usb connection sounds and when going into device manager and looking at usb connections, its says samsung android device. Seems like I could get into download, but I guess I'll just keep trying to time it exactly right even though Ive hit the command near the connection noise every time.
I'm not losing hope, but I went ahead and ordered the jig off of ebay that mengbo posted, I'm really hoping that the jig could solve my problem for good. From your perspective guys, would the jig DEFINITELY work? Or is it just a kinda one shot, hope for the best thing?
The JIG is a pretty sure thing seeing as how you are just in a boot loop.
CCDillon, Im in the same boat as you. Same thing happened to me. I have tried a jig and it did not work for me. Hopefully it works for you. I have tried ADB also and it could not find the device. I really hope there is something out there that can help us.
aw man, that's not good at all.. hope you can find a way. Did you make a jig and were you using the same ROM?
Hopefully its just mine and the jig works for you. I didnt mean to scare you. I made a jig at first, and it kept booting the phone. Thought I didnt make it correctly so I got one off of ebay, thinking it had to work. That one did the same thing. Thought maybe it was a faulty jig and the guy I got it from ('mengbo' on this forum) sent me another one to see if that was it. The new jig he sent (that worked on his phone) did the same thing. So, something else is going on.
I was going from Phoenix 4.5 to Supernova ROM and it gave me the same error you got. Now it Boots the ATT screen then loops the Phoenix ROM logo over and over. 1 vibrate followed by 2 more
I'm hoping the JIG works for mine, otherwise I'm not sure what to do. I admit it does scare me a bit to see that you've tried all these different things with no result. I was scanning the precision thread and it seems one of the avid users/posters got caught in a boot loop and it looks like they have gotten out of it, I sent a PM so maybe I can see what that user did, though part of me is thinking that the three button method worked for him but for some reason not for me. This is very frustrating and I'll keep an update on everything, the JIG should be here in about 3 days or so.
Also, you think it may have something to do with how many times our phones have been flashed? Ive looked up to see if flashing is bad for the phones "health" but it seems flashing won't really hurt anything, nor have I really flashed too much. Btw, my phone acts the same you described as well, with the random vibrating and everything.
My mind just seems to be jumping to any random possibility, it just sucks not having a working phone.
Hope SOMETHING works for you
Seriously - you guys are all worked up over a boot loop. the JIG will put you into dl mode just fine... only time it has high chance of NOT working is if you only see black screen - no power up at all.... you can make a JIG by getting 3 - 100k ohm resistors and a 1k ohm resistor from radio shack for about $1.25... its simple.
I removed my 3 button combo accidentally by flashing att 1 click, theres an att 1 click with 3 button fix, flash that when you can get into download mode.
If you can connect with adb use it to go to download, if not, you need a jig... it works, I have been down your path!
jgc121 said:
Seriously - you guys are all worked up over a boot loop. the JIG will put you into dl mode just fine... only time it has high chance of NOT working is if you only see black screen - no power up at all.... you can make a JIG by getting 3 - 100k ohm resistors and a 1k ohm resistor from radio shack for about $1.25... its simple.
Click to expand...
Click to collapse
+1. Learn how to make the JIG you need HERE...
Or buy one from me HERE... < Shameless plug.
I was in the same situation as you guys after i had a bad flash and the loop on the bootanimation. I bought a jig online and it worked. The trick is to take out your microsd, and simcard and leave out the battery for 15 seconds. Then put back ONLY the battery in, and plug in the jig. It should turn back on and be put into download mode then flash with one click odin.
odin one click WITH 3 button fix....... saftey first.
Hi all,
I have a friend who rooted his Galaxy Tab and has used odin to partition his device, an ext 4 partition i think, anyway, something failed and and gave an error and he turned it off because it became non responsive and now it wont turn on, the screen lights up but nothing comes on, power and up or down does nothing and power with up and down also does nothing, rooted with v4root.
Sorry if this is a little vague but is there anything anyone can say which might be able to help? I know adb can be used from the bootloader (or is it recovery) but if those key cominations are doing nothing then how could he get to it?
Thanks in advance and sorry if i sound vague.
Pm me with more details and ill help you out.
1. Can you get into recovery or dl mode?
2. Will it charge?
3. If connected to computer, will computer still recognize it?
Sent from my SGH-T959V using XDA Premium App
itsjusttim said:
Pm me with more details and ill help you out.
1. Can you get into recovery or dl mode?
2. Will it charge?
3. If connected to computer, will computer still recognize it?
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Hi and thanks for replying,
Answers to his questions are below:
1. Can you get into recovery or dl mode?
NO – when pressing power and down (or up) it just makes the screen light up after about 10 secs then the light will turn off after you let go of the button
2. Will it charge?
Looks like it, although I do not get any icon to say it is charging or not. Have tried holding down the power and touching the screen (mentioned on another Forum) to see if the icon will appear but nothing. Have left it on charge from the mains all night (over 8 hours)
3. If connected to computer, will computer still recognize it?
No – Have installed the latest version of Kies and my machine does not pick it up as a connected device at all. Also, Odin no longer see’s it connected via USB (yellow tab with a COM number)
Like i said sorry for being a little vague, hope this helps.
Hi itsjusttim,
dladz is helping me out with this Tab issue. He said it best to try and post on xda and look for similar posts.
I've looked around and am very stuck at this moment in time.
If you want to PM me, please do
kyukashi said:
Hi itsjusttim,
dladz is helping me out with this Tab issue. He said it best to try and post on xda and look for similar posts.
I've looked around and am very stuck at this moment in time.
If you want to PM me, please do
Click to expand...
Click to collapse
Ello m8,
If you get a resolution post here so others can maybe get a hand from it.
Best thing I can think of is to let it charge overnight and try again to connect to odin.
If thats a nogo then I think I read somewhere that someone was making jigs to get into dl mode.
These things have helped others from recovering there tabs. I bricked my tab a month ago, tried the jig and still didnt work. I ended up calling samsung and "played stupid" and got it fixed. [$99.99 repair]
EDIT: just looked over my bill and the part they replaced is labeled as "PBA" and cost nothing to replace.
let me know if there are any other qs. Imo, looks as there is a way to avoid the $99 'standard repair' charge.
Sent from my SGH-T959V using XDA Premium App
looks like I've gota send it to Repair Center feel like such a n00b to do it but after lots of post reading and forum searching it seems like it's the only way!
Spoke to Samsung and they said coz "i've tried to do a software update and there is no software update yet officially available, that I may have voided warranty". I basically played dumb and they said to send it in.
It's looking like I'm getting it replaced or reflashed by them now, so hopefully will have it back soon and working
Really wish you good luck. Please keep us updated if/how much they charged you...
send from my SGT with Overcome...
Can't get into recovery/dload mode Phone boots to white At&t screen makes few sounds
I have recently messed up my Captivate when I was trying to flash a ROM. My phone goes up to the white At&t sign and then makes a few sounds and stops. It also goes to the charging screen when plugged in the cpu when off. I have tried countless ways to get it to go into dl mode or even recovery mode. Ive tried: ADB vol up and down plus power with usb plugged in/battery put in, vol down usb plugged in/battery put in, vol up usb plugged in/battery put in, just vol up and down usb plugged in/battery put in, and nothing seems to be working. WITHOUT someone tellin me to use a jig can ANYBODY please help me find a way to do this. I have even pressed menu and volume down while the phone was in off charging state with green bar loading and the cpu made a sound and cpu said unrecognized device...from there I have tried to root my phone hoping it goes into recovery mod(which ive done to fix my phone before) also from there i have tried odin but no recognizance and I also have tried adb reboot download and adb reboot recovery. NOTHING WORKS...someone please HELP ME!
thanks in advance
What rom were you trying to flash?
why SO resistant to someone telling you to make/buy a jig? its a very easy thing to make and it will solve your no download mode issue in seconds. if nothing else will get you in download mode a jig will for sure (unless your usb port is broken) you can try and exhaust all other solutions but after you've ripped all your hair out build a jig.
its like trying to dig a ditch with a garden spade when you have access to a back hoe
Good point
stud u really make a goop point about it being easier to buy a jig than to pull ur hair out. Which if this kid really was pulling his hair out he shouldn't have been doing this at all. But, I am also having this same problem. I was using a CM7 build and it worked great until i tried to install the gapps. then it went crazy. It rebooted itself and went through the Cyanogen Mod first screen then would get stuck on the CM7 blue android on skateboard bootscreen. If I touched the screen at the bottom right it would vibrate for some reason. Shortly after realizing I needed a jig for it I decide to buy a new one cause at the time I didnt know if I could properly make one. So I've kept my first captivate still trying to find a non-jig method. I recently taught myself begginers adb on Windows XP OS but I am very much a noob except for rooting and flashing. Any help of yours would be great anytime. Thanks,
Matt
gujuplaya111 said:
NOTHING WORKS...someone please HELP ME!
thanks in advance
Click to expand...
Click to collapse
Shows that youve been a member since Dec-2010 so Im assuming that you really did try everything because you have read and read and read (riiiiiiight!?) and without telling us whether you tried to flash a Froyo or Gingerbread ROM I'd sugguest that you buy a JIG. Its really the best solution and the less time consuming if you cant think of anything else to try. You can order one or make your own...literally took about 30 minutes for me to get my phone to a place where i can work with it....a trip to the radioshack and making the JIG and back home.
If you are making requests on specifically NOT to tell you to do it a certain way then you may have to accept that you might have to solve this problem on your own, especially if you said that you tried everything except the one thing that you cant do (which is what we might suggest) and probably will fix your situation.
So i re-read after making my first post to this. I've bought my 5th Cap. now and have quite a bit more knowledge than before. So my question is. If I've completely bricked my 3rd cap... No battery charge screen and all will a jig still work for me to get into download? I was tryin to come back from cm7 but something went wrong.... I really don't need the extra phone but it would be nice to have my back up
Sent from my SGS Captivate on Cog. 5 v2 using XDA Premium App
dm63755 said:
So i re-read after making my first post to this. I've bought my 5th Cap. now and have quite a bit more knowledge than before. So my question is. If I've completely bricked my 3rd cap... No battery charge screen and all will a jig still work for me to get into download? I was tryin to come back from cm7 but something went wrong.... I really don't need the extra phone but it would be nice to have my back up
Sent from my SGS Captivate on Cog. 5 v2 using XDA Premium App
Click to expand...
Click to collapse
If the screen doesnt turn on at all and there is no charge screen or recognition at all of usb than it is more likely then not hard bricked.
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.
Thanks xijar then i will for sure purchase a jig. Worth a try anyway.
Sent from my SAMSUNG-SGH-I897 using XDA App
so apparently I tried to flash without the physical 3 button combos for download and recovery mode so I got into download mode with adb commands.
but now I'm stuck in the PHONE--!--PC part, and odin doesnt recognize my phone. I've read most of the threads out there but none of the methods work, is it possible to fix this? or my only option is to bring back to the store?
gahlaygai said:
so apparently I tried to flash without the physical 3 button combos for download and recovery mode so I got into download mode with adb commands.
but now I'm stuck in the PHONE--!--PC part, and odin doesnt recognize my phone. I've read most of the threads out there but none of the methods work, is it possible to fix this? or my only option is to bring back to the store?
Click to expand...
Click to collapse
Reinstall drivers then plug your phone back in that should do it.
Sent from my SGH-T959V using XDA Premium App
TJj33p3rz said:
Reinstall drivers then plug your phone back in that should do it.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
oh, I've done that dozen of times.. still the same
See the "Connection Issues" Sticky Thread link that is in my Sig links-link below.
Sent by XDA Premium App
I had that happen then i tried to me many times i also ran the hiemdall back to stock one click it will ask you to install them again i did that it worked,then i was back to stock then started over.Now i ran odin and now my captivate wont even power on its just dead.Keep at it something will end up working.Good luck.
I never had that screen but I ran into an issue before (using motherboard USB port, correct drivers, etc) where I was in download mode but my computer did no recognize my phone. I had a jig and ended up pulling the battery, reinserting battery, and putting back in download mode and that worked.
would you guys happen to know how to determine if its an driver issue or the phone's problem?
oh and I've tried the CONNECTION ISSUE post, none of them worked for me
and also does the jig definitely work?
gahlaygai said:
would you guys happen to know how to determine if its an driver issue or the phone's problem?
oh and I've tried the CONNECTION ISSUE post, none of them worked for me
and also does the jig definitely work?
Click to expand...
Click to collapse
You can eliminate drivers as an issue by trying a Linux machine. Wubi installer is the easiest way to try it.
I've been at that screen many times. I would bet drivers have nothing to do with it at this point. The phone---!---PC screen is what I've always called a soft brick, not download mode. If you didn't have 3 button recover/download mode working before you used Odin, then the only thing I can think of is to make yourself the 301kohm jig. That should kick it straight into download mode. There's many links for this in here.
From there, I'm pretty sure there's something you can flash to give yourself button recover/download again, but since I have a first rev phone I've never had to do this.
bobbylx said:
I've been at that screen many times. I would bet drivers have nothing to do with it at this point. The phone---!---PC screen is what I've always called a soft brick, not download mode. If you didn't have 3 button recover/download mode working before you used Odin, then the only thing I can think of is to make yourself the 301kohm jig. That should kick it straight into download mode. There's many links for this in here.
From there, I'm pretty sure there's something you can flash to give yourself button recover/download again, but since I have a first rev phone I've never had to do this.
Click to expand...
Click to collapse
oooo i see, thanks, will try asap!
gahlaygai said:
oooo i see, thanks, will try asap!
Click to expand...
Click to collapse
The phone----/!\----PC screen is DL mode dude...
^^^ This. You can usually flash right from that screen.
b-eock said:
The phone----/!\----PC screen is DL mode dude...
Click to expand...
Click to collapse
This is Download mode.
This is a soft brick. Now some phones may be able to be flashed while in this mode, but mine can't. Mine is a rev 1007, meaning 3 button always worked and is damn near unbrickable. I've been on that screen many times and never been able to make Odin connect. But, I have been able to pull the battery, plug in USB, hold both Vol, and put battery in and boom, back in DL mode.
bobbylx said:
This is a soft brick. Now some phones may be able to be flashed while in this mode, but mine can't. Mine is a rev 1007, meaning 3 button always worked and is damn near unbrickable. I've been on that screen many times and never been able to make Odin connect. But, I have been able to pull the battery, plug in USB, hold both Vol, and put battery in and boom, back in DL mode.
Click to expand...
Click to collapse
The phone-!-computer that can be used as dl mode is the one that says "Firmware Upgrade Failure". I've flashed from that screen before (new one, not old one). Unless you have the i897 gb bootloaders, you probably won't see the new panic screen. A jig will fix you up if have the old panic screen.
mrhaley30705 said:
The phone-!-computer that can be used as dl mode is the one that says "Firmware Upgrade Failure". I've flashed from that screen before (new one, not old one). Unless you have the i897 gb bootloaders, you probably won't see the new panic screen. A jig will fix you up if have the old panic screen.
Click to expand...
Click to collapse
That makes sense. I haven't seen that screen while using GB boot loaders, only the older version.
Sent from my I9000 using Tapatalk
Sorry
10 char
b-eock said:
bobbylx, I have had all types of bricks this phone can have. I have a build 1012 and still didn't have the button combo problem. I promise you I know more about any subject on this phone than you. The
Phone----/!\-----PC screen
Is the firmware putting you into DL mode because it isn't going to boot up.
The android man digging is a hardware combination into DL mode.
I have had all screens this phone can have, I also have the unbrickable mod, so while your phone is brickable, mine isn't.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Well, let me rephrase my statement for you since you were obviously upset by what I said.
I've had this phone since release week. In that time, I have seen the phone---!---PC screen many times while flashing. My phone will not flash while on the phone---!---PC screen. Odin does not see it, nothing works. Many other users experience this as well.
I happened to mention that I have never had a 3 button issue no matter what I flash. So when I have been at the phone---!---PC screen, I do the battery pull, usb thing, and kick it into normal "shovel man" download mode, ie, the only one I can flash my phone with.
Now, phone---!---PC may act and work like download mode for you but doesn't for me. So I offered advice based on my personal experience.
While you may know more about the phone than I do, making statements like that do nothing to help your popularity around here.
Also, pretty sure my phone is unbrickable without the mod, at least I haven't and won't brick it by doing whatever I do. If I was a Dev, may be a different story. I can tell you I have flashed almost every ROM in the last year and a half and never had a problem I couldn't resolve.
bobbylx said:
Well, let me rephrase my statement for you since you were obviously upset by what I said.
I've had this phone since release week. In that time, I have seen the phone---!---PC screen many times while flashing. My phone will not flash while on the phone---!---PC screen. Odin does not see it, nothing works. Many other users experience this as well.
I happened to mention that I have never had a 3 button issue no matter what I flash. So when I have been at the phone---!---PC screen, I do the battery pull, usb thing, and kick it into normal "shovel man" download mode, ie, the only one I can flash my phone with.
Now, phone---!---PC may act and work like download mode for you but doesn't for me. So I offered advice based on my personal experience.
While you may know more about the phone than I do, making statements like that do nothing to help your popularity around here.
Also, pretty sure my phone is unbrickable without the mod, at least I haven't and won't brick it by doing whatever I do. If I was a Dev, may be a different story. I can tell you I have flashed almost every ROM in the last year and a half and never had a problem I couldn't resolve.
Click to expand...
Click to collapse
Well let me say I am sorry for not reading it correctly! Sorry. Will edit my post!
b-eock said:
Well let me say I am sorry for not reading it correctly! Sorry. Will edit my post!
Click to expand...
Click to collapse
No worries. And again, I'm no Dev so anything I say is just from what I've experienced. I'm sure there's quite a lot I don't know.
Anyway, to the OP, keep this thread updated on your progress.
And to go back to what I was saying, if you can't flash while in phone--!--pc mode and you can't get into shovel download mode, do the 301kohm resistor jig trick.
Sent from my I9000 using Tapatalk
I hope someone can help me here, I'm posting with the belief that this may be a simple enough problem (With the hope).
I tried to install a Custom Recovery on my Galaxy S using this tutorial - wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
I managed to get to step 6, and a blue bar appeared, but then i could not do step 7.
Now i cannot boot into recovery mode, nor will the phone boot past the Samsung Galaxy S logo.
I can still get into download mode, but Odin does not detect the phone.
. I have changed cable and tried different versions of Odin..
When i turn on the phone normally it shows the Samsung Galaxy S logo, blinks, and then reboots and does the same.
When i try to enter recovery, i get the same, unless i connect it to the PC. I then get an 8 pointed star, like the loading flash circle thing - the same as a flash video loading except it does not move.
I have also removed the battery and tried to enter recovery and download mode while inserting the battery.
I have removed the SIM and battery for a few minutes.
when i try to start Zadig, with the phone connected in Download mode, i get "Gadget Serial" as the device connected. I used to get "Samsung USB Composite Device"
I have tried many different things and read over the recommended threads on this forum. I think i need a bit more pointing in the right direction.
I really hope somebody can help me. I am very worried that i may have bricked it.
Thank you.
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975
akash6969 said:
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975
Click to expand...
Click to collapse
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.
Tomato_Jam said:
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.
Click to expand...
Click to collapse
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!
sorry to ask some stupid question, but can u make sure what versiom ur fone is?
is it i9000?, or i9001 or i9003? or korean anycall? as far as i know, flashing i9000 ROM to i9003 will hardbrick da device.
Sent from my GT-I9000 using xda premium
akash6969 said:
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!
Click to expand...
Click to collapse
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.
Tomato_Jam said:
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.
Click to expand...
Click to collapse
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD
You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1
Soryuu said:
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
huskyT said:
You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1
Click to expand...
Click to collapse
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
@Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).
Tomato_Jam said:
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
@Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).
Click to expand...
Click to collapse
Don't stress mate, we all have bad days, we all make mistakes
Sent from my GT-P7510 using Tapatalk HD
Well....
I would have been quicker if i had ordered a jig and done it myself.. (Worth mentioning, i had told guy in phone shop what happened, and about the required "jig")
I collected my phone from the shop today, after a week, and i was told "Your phone is f*****d". To which i replied, "what? are you sure, i mean, i have only flashed it with SGS2 firmware, i'm under the impression it is very hard to break/brick, if i have a jig."
He told me, "Nope, it's beyond repair, it won't work. If you want, i can use the screen and other parts, i'll buy it off you for €40"
No thanks.
So now i am on the lookout for a premade jig. Does anybody know where i can buy one?
I meant to last week, but things happened, and without a phone i was running around a bit...
I'm going to check ebay, but if somebody could recommend somebody reliable, i'd prefer that. Thanks.
I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....
rodman01 said:
I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....
Click to expand...
Click to collapse
Thanks.
I bought a jig, and it arrived today. Have phone in charger.
Do i just plug the jig in?
Or do i also do the three button press?
The screen is completely black, and nothing appears on it.
only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:
rodman01 said:
only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:
Click to expand...
Click to collapse
Thanks, going to leave it charging for a little longer, and try it.
If it doesn't work, would a motherboard for the Samsung Galaxy S be easy to replace? I have found one unlocked for €25.
EDIT
Found a tear down video here - http://www.youtube.com/watch?v=vxPWsLd05F4
yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.
rodman01 said:
yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.
Click to expand...
Click to collapse
Thanks again.
I am after removing it from the charger, and inserted the jig. It's in about 30 seconds now, and nothing is happening..
that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....
rodman01 said:
that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....
Click to expand...
Click to collapse
What seems to have happened, is i tried to flash it with SGS2 rom. So is it unbrickable?
I am not sure but I think that minimum the bootloader is damaged...there is one more possibility: to repair it via jtag...but for this you have to find someone, who ones one and can repair it....some of the guys don't take much money for such a repair, but with transport costs ets...perhaps it would be cheaper and faster if you take the new mainboard you mentioned.