Hi guys, my first post here but i has been following your roms and forum since a year or so
i bought a moto milestone from ebay free free operator and i brought it here to colombia my country, my operator is tigo 850/1900/2100 but i never been able to activate 1900 band.
is possible activate my baseband to 1900 and get 3g working?
i already tried openrecovery for change baseband to some country/operator with the baseband combo 850/1900/2100 but it never works
i have just right now miui lastest version, lastest openrecovery and i know how to root, how to unroot and the basic knowledge about install roms
any help is so much appreciated
BLacKR1D3R said:
Hi guys, my first post here but i has been following your roms and forum since a year or so
i bought a moto milestone from ebay free free operator and i brought it here to colombia my country, my operator is tigo 850/1900/2100 but i never been able to activate 1900 band.
is possible activate my baseband to 1900 and get 3g working?
i already tried openrecovery for change baseband to some country/operator with the baseband combo 850/1900/2100 but it never works
i have just right now miui lastest version, lastest openrecovery and i know how to root, how to unroot and the basic knowledge about install roms
any help is so much appreciated
Click to expand...
Click to collapse
Try setting up your 3G by changing the APN in Mobile Network Settings.
thx for your answer, i have the rigth settings in the APN, and i have edge data only.
Hi all ,
I would like to know if a baseband exists for the Lg Trill using T-Mobiles 3G/4G . The only reason im asking is because im with Simple Mobile right now and since they use T-Mobiles network I would like to get faster download speeds. BTW this baseband would have to work for GB. As I am currently using GB and I would like to keep GB. I would also like to know if there is a method if it was tested and if it was successful ? Thank You.
No amount of software can enable a radio band that isn't there. AT&T Thrill does not have 1700mhz band. That's like asking developers to create an app for the Thrill to shoot out an infrared beam to remote control my TV.
what version of gb you are running? was it the leak one or the official 21a kdz.
if u flash 21a kdz,file, then its very good chance that tmo 4g baseband already included, because i have o3d (p920) tmo version running 21a kdz and i get 3g/4g speed. as far as i know, thrill lack hardware 1700mhz band and that could be the reason no 3/4g on tmo or simple. however other user (p925) flashing 21a kdz file and using tmo, getting 3/4g speed. u might want to take a look at it
anduios said:
what version of gb you are running? was it the leak one or the official 21a kdz.
if u flash 21a kdz,file, then its very good chance that tmo 4g baseband already included, because i have o3d (p920) tmo version running 21a kdz and i get 3g/4g speed. as far as i know, thrill lack hardware 1700mhz band and that could be the reason no 3/4g on tmo or simple. however other user (p925) flashing 21a kdz file and using tmo, getting 3/4g speed. u might want to take a look at it
Click to expand...
Click to collapse
Im using the one which was leaked for o3d . I think v21 ?
I had 2G networks only but then i disabed that and restarted my phone thinking the 3G would work but kept getting no network . So im guessing i have to use anofher baseband ? Can someone asisst me further?
Can someone plz tell me how to unlock my similar so I can use my phone
gunem said:
Can someone plz tell me how to unlock my similar so I can use my phone
Click to expand...
Click to collapse
I paid 15.00 and got it unlocked at unlockthatphone.com i cant remember if its .com just google it and you will find it.
Demonface said:
Im using the one which was leaked for o3d . I think v21 ?
I had 2G networks only but then i disabed that and restarted my phone thinking the 3G would work but kept getting no network . So im guessing i have to use anofher baseband ? Can someone asisst me further?
Click to expand...
Click to collapse
if you upgrade gb v21a kdz on this link
http://forum.xda-developers.com/showthread.php?t=1287236
then i think the tmo baseband is in there. not 100% sure, but that is the link that i upgraded my o3d and i am able to get 3/4g signal.
there is limitation, p925 technically lacks 1700mhz. radio band that uses for tmo 3/4g signal.
you can check more on this thread similar topic
http://forum.xda-developers.com/showthread.php?t=1316554
anduios said:
if you upgrade gb v21a kdz on this link
http://forum.xda-developers.com/showthread.php?t=1287236
then i think the tmo baseband is in there. not 100% sure, but that is the link that i upgraded my o3d and i am able to get 3/4g signal.
there is limitation, p925 technically lacks 1700mhz. radio band that uses for tmo 3/4g signal.
you can check more on this thread similar topic
http://forum.xda-developers.com/showthread.php?t=1316554
Click to expand...
Click to collapse
I did that and when i go into settings it says Optimus 3D as my device now. So shouldn't my 3G work ?
Demonface said:
I did that and when i go into settings it says Optimus 3D as my device now. So shouldn't my 3G work ?
Click to expand...
Click to collapse
i feel you
p925 does not have hardware tmo 4g radio anntena inside (1700mhz). that is the reason probably why no 3/4g eventhough the sofware baseband is present. and about the phone under setting, it said so because the rom is build base on o3d. it can be changed to anything with editor and root
here is p925 specs
http://www.gsmarena.com/lg_thrill_4g-3886.php
i don't know if there is any other way around. i am sorry about 3/4g data
anduios said:
i feel you
p925 does not have hardware tmo 4g radio anntena inside (1700mhz). that is the reason probably why no 3/4g eventhough the sofware baseband is present. and about the phone under setting, it said so because the rom is build base on o3d. it can be changed to anything with editor and root
here is p925 specs
http://www.gsmarena.com/lg_thrill_4g-3886.php
i don't know if there is any other way around. i am sorry about 3/4g data
Click to expand...
Click to collapse
i got the 3G to show but after a while it goes away and it stays at No Network. any solution?
what happens if you flash unlocked AT&T LG Thrill 4G with froyo to official V21A_00.kdz ? Do I lose the unlock?
UPDATE: It worked and I see 3G appearing on my display with t-mobile
[/COLOR]
berkserk said:
what happens if you flash unlocked AT&T LG Thrill 4G with froyo to official V21A_00.kdz ? Do I lose the unlock?
UPDATE: It worked and I see 3G appearing on my display with t-mobile
Click to expand...
Click to collapse
Did you flash AT&T Thrill 4G Froyo baseband to V21A?
Can you be little more specific on what you did?
How did it change your phone? Did anything get improved?
I followed the steps for updating P920 to official V21A_00.kdz and it worked for P925 as well.
It improved in the sense that know I have FM radio app working and also I get 3G signal with T-Mobile, and also I get rid of At&t apps which do not work on T-Mobile.
I flashed Acura's rom on the O3D thread after flashing the GB kdz and now I'm getting 4g speeds on T-Mobile.
Sent from my GT-P7510 using Tapatalk
berkserk said:
what happens if you flash unlocked AT&T LG Thrill 4G with froyo to official V21A_00.kdz ? Do I lose the unlock?
UPDATE: It worked and I see 3G appearing on my display with t-mobile
Click to expand...
Click to collapse
Good morning. I'm currently in possession of a rooted Lg Thrill. I am trying to flash the phone to a t-mobile base band as well. I'm curious did you root the phone and flash? Or did you download the foyo update and flash? Any help would be appreciated. Thank you!
Thecookieman said:
Good morning. I'm currently in possession of a rooted Lg Thrill. I am trying to flash the phone to a t-mobile base band as well. I'm curious did you root the phone and flash? Or did you download the foyo update and flash? Any help would be appreciated. Thank you!
Click to expand...
Click to collapse
I first flashed it then I rooted it and then it was good. But if it goes into bootloop you would have to go into CWM and reset it and it will work perfectly.
berkserk said:
I followed the steps for updating P920 to official V21A_00.kdz and it worked for P925 as well.
It improved in the sense that know I have FM radio app working and also I get 3G signal with T-Mobile, and also I get rid of At&t apps which do not work on T-Mobile.
Click to expand...
Click to collapse
So if I understand you correctly you have thrill 4g 3D(p925)
you flashed the 21a_00.kdz and now you have 3G on Tmobile?
Please share your steps to accomplish all of this
After getting much needed help, my daughter's thrill is now enjoying tmobile's 4g network, and she can now watch youtube, no buffering, netflix no buffering. Thanks to the dark lestat
latinohot said:
So if I understand you correctly you have thrill 4g 3D(p925)
you flashed the 21a_00.kdz and now you have 3G on Tmobile?
Please share your steps to accomplish all of this
After getting much needed help, my daughter's thrill is now enjoying tmobile's 4g network, and she can now watch youtube, no buffering, netflix no buffering. Thanks to the dark lestat
Click to expand...
Click to collapse
are you saying that an att thrill phone can be used on simple mobile and get 4g by this method?
goog question, my dad has simple mobile and my daughter I have her thrill on T-mobile
after flashing BB my daughter's thrill gets very impressive speeds 7mbps down and 2.5+up, I will try my dad's simple mobile sim card on my daughter's thrill and see if infact is capable of receiving 3G speeds at least.
FANTASTIC
I see I'm not crazy so this can be done, I need the tutorial on how to do this PLEASE!! I've been searching for this for weeks and I'm sick and tired of edge, I need my 3 or 4g speeds! Please give me the link on how to do this and please make sure that all the steps are there. Many tutorials assume you know certain steps I need ALL OF THEM!! Thank you to all.
found a way to extract with this tool.
attached the baseband for whoever wants it.
final result = endless boot loop.
ORIGINAL POST:
Hello,
I tried to flash the new ics port, with different basebands but the reception wasn't good.
my carrier works on 3G 2100/850mhz bands, and no 2G support.
did a little research and found:
p920 supports 2100 mhz (and others but not 850 mhz) 3g band
p920h supports 850 mhz (and others but not 2100 mhz) 3g band
any of those bands alone gives me half of the reception coverage.
however p925 basebands support both 850 and 2100 mhz.
when i flashed at&t official GB rom from here, i've got full support of my network, wich is by the way not at&t, but Pelephone, Israel.
my idea is to dump the GB baseband from original at&t's rom
and flash it after flashing the new ICS port (instead of the given XBSA404_CP.fls), which i think should work with the GB baseband.
my question to you guys is how can we dump only the baseband from at&t official rom
and flash it on an ICS thrill ?
and do you think this should work ?
Thanks in advance, ValkA.
ValkA said:
Hello,
I tried to flash the new ics port, with different basebands but the reception wasn't good.
my carrier works on 3G 2100/850mhz bands, and no 2G support.
did a little research and found:
p920 supports 2100 mhz (and others but not 850 mhz) 3g band
p920h supports 850 mhz (and others but not 2100 mhz) 3g band
any of those bands alone gives me half of the reception coverage.
however p925 basebands support both 850 and 2100 mhz.
when i flashed at&t official GB rom from here, i've got full support of my network, wich is by the way not at&t, but Pelephone, Israel.
my idea is to dump the GB baseband from original at&t's rom
and flash it after flashing the new ICS port (instead of the given XBSA404_CP.fls), which i think should work with the GB baseband.
my question to you guys is how can we dump only the baseband from at&t official rom
and flash it on an ICS thrill ?
and do you think this should work ?
Thanks in advance, ValkA.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1338383
Original GB 1.8a baseband, in .fls format. I dont know why you need to go through all of this, you can flash this AT&T Baseband ontop of a Thrill (P925) WITH the ICS port to have 3G. Shoot, I have HSPA on mine.
the 1.8 baseband is made for p920, which doesn't support both 3G 2100 and 850 mhz, it supports only 2100.
i will have HSPA with this baseband, but with a little network coverage.
with the p925 baseband i have full network coverage, thats why all the effort.
you were right, i tried to flash it one more time and it works now!
Hello,
I'm trying to activate 4G on my Droid 4, but it seems that I can't get it to work.
- Stock ROM (with build.prop changes from Mentor)
- CM 10.1.3 (with Mentor's gsm patch)
Proximus uses 1800Mhz band for 4G / LTE according to this article
http://en.wikipedia.org/wiki/Proximus
Does someone know how to enable 4G on my phone?
TIA,
Fossie
Hi,
Does anyone know which bands are enabled on the US Cellular v405ua firmware? I currently have the 20a QA firmware flashed which has pretty much all bands enabled, but there haven't been any updates to it. I was thinking about flashing the US Cellular 20e version, but am not willing to lose any bands.
Alibaba0101 said:
Hi,
Does anyone know which bands are enabled on the US Cellular v405ua firmware? I currently have the 20a QA firmware flashed which has pretty much all bands enabled, but there haven't been any updates to it. I was thinking about flashing the US Cellular 20e version, but am not willing to lose any bands.
Click to expand...
Click to collapse
Just did an OTA update to 20f with Verizon. Security patch to 1 Jan 2020.
Sent from my LM-V405 using Tapatalk
View attachment 4936087
Einsteindks said:
Just did an OTA update to 20f with Verizon. Security patch to 1 Jan 2020.
Sent from my LM-V405 using Tapatalk
View attachment 4936087
Click to expand...
Click to collapse
If you did OTA, i assume you are running stock? Not sure that helps me. Looks like att specific bands are disabled on the lg 40 from us cellular. Looks like i'm stuck with the 20a qa7 firmware for now.
In case this helps anyone else. US Cellular lg v40 specs:
4G LTE Bands 1/2/3/4/5/7/12/13/20/25/46/66/71; 800 MHz CDMA; 1.9 GHz CDMA PCS
https://www.uscellular.com/phones/lg-v40-thinq
lg v405qa7 firmware specs:
LTE Bands 1/2/3/4/5/7/8/12/13/14/17/20/25/26/28/29/30/38/39/40/41/46/66/71; WCDMA Bands 1/2/4/5/8; GSM 850/900/1800/1900 MHz; 800 MHz CDMA; 1.9 GHz CDMA PCS; Secondary 800 MHz CDMA
https://www.lg.com/us/cell-phones/lg-V405QA7-unlocked-v40