Database Develop

ics

Hello im new in this forum and i just want to know if possible if there is any ics rom for I9000 to upgrade whith odin or heimdall since im not able to get the recovery menu in my galaxy

Is there a reason you cannot root your phone and install cwm?....full guide and download links to the files needed here : http://www.theandroidsoul.com/how-to-root-xwjvb-and-install-clockwork-mod-cwm-recovery/

I have tried that already i think its hard briked cod if i turn im off i cant turn im on anymore only if i flash him again
Sent from my GT-I9000 using XDA App

you may have better luck finding stock files to flash through odin, your going to want the 512 pit file and I9000UGJL2Complete (thats your PDA file) and make sure you check the re-partition box!!! let its reboot and it should be like purchasing from day one.
Put it into download mode again and then put speedmod-kernel-k13e-500hz (PDA file) in the PDA box, and only have that file present, with re-partition UNCHECKED this time. let run and when it reboots it should still work (cause its running froyo 2.2) and be the same
however now you should be able to boot into CWM recovery to flash custom rom. if you want, before flashing the speedmod kernel you can run superuser1click to install superuser.
Hope that helps!!

Ok i will try that but im not sure if it will work cos even in download mode i only have a black screen and the two lights from the soft keys
Sent from my GT-I9000 using XDA App

i found a thread discussion about similiar problem and hope there is any help to your case.
http://forum.xda-developers.com/showthread.php?t=1120880
Just read it trough and try everything out because at what point you are at there is nothing more you can do

[Q] Boot loops at random on power on, downgrade doesn't fix

Hello everyone,
I've got an Australian vodafone GT-i9000 which i bought that was having issues boot looping on power on. Sometimes it can boot loop for 20 seconds (looping at the Samsung screen, not the S screen) while others it can boot loop for 20 minutes before powering on.
I've tried flashing with ODIN using the 512 pit to numerous stock versions, most recently this : GT_I9000_XWJVP_XXJVQ_VAUJV6_Sbl (stock vodafone AU rom). The flash goes fine, however if I select format with the 512 PIT I can get the following message after the reboot:
E:format_volume: rfs format failed on /dev/block/mmcblkop2
Even if this message doesn't come up on flash, The phone keeps boot looping. Once started, the phone seems to work fine detecting internal & SD memory. I want a more permanent fix however, because if I was planning on giving it to a friend and 'leaving the phone boot looping until it starts' is probably too hard for them to understand. Also I'm not sure if there's an issue with the internalSD which is causing the problem, and if it is, it could cause further issues on more harder use.
Anyone had this sort of issue? The phone was flashed with ICS when the guy sent it to me, he said the bootloops started after he upgraded to ICS. I've got a 32gb SD- tried removing before flash and having it in while flash with no success (have seen a guide for installing on external SD for the i9000m- however it looks like you can only do this if the media device has completely failed). It seems to boot every time using a bootloader kernal (cant remember the name, ICE something from memory) into the recovery software- so maybe a busted sector on the internal SD?
Ideas anyone?
Cheers,
Dylan

Maybe try going into cwm wipe internal same card memory, remove external as card, put into download mode and flash with Odin using pit and repetition checked, if you get the devblock error flash this is PDA without repetition checked and without pit http://forum.xda-developers.com/showthread.php?t=984140
Sent from my GT-I9000 running remICS-UX using XDA premium

calum96 said:
Maybe try going into cwm wipe internal same card memory, remove external as card, put into download mode and flash with Odin using pit and repetition checked, if you get the devblock error flash this is PDA without repetition checked and without pit http://forum.xda-developers.com/showthread.php?t=984140
Sent from my GT-I9000 running remICS-UX using XDA premium
Click to expand...
Click to collapse
Thanks for the tip man, will give it a go now

dillzy1986 said:
Thanks for the tip man, will give it a go now
Click to expand...
Click to collapse
After second reboot after following your steps the boot looping started again. Any more ideas matey?

Is there any error when flashing in Odin or after and it opens the does on the the phone? Applying csc ect? If so what do the errors say?
Sent from my GT-I9000 running remICS-UX using XDA premium

calum96 said:
Is there any error when flashing in Odin or after and it opens the does on the the phone? Applying csc ect? If so what do the errors say?
Sent from my GT-I9000 running remICS-UX using XDA premium
Click to expand...
Click to collapse
Theres an error message about the CSC but it flicks up so quick i cant see it. It's not in red however- its just in yellow text. I'll see if i can get an error message outta it.

Hmm try flashing the cf root kernel with Odin after the install, don't tick repetition
Sent from my GT-I9000 running remICS-UX using XDA premium

1. Flash Stock Rom WITH BOOTLOADER !!!
2. Problem should be solved :/
OR
Get a stock rom from KIES !
after that you can apply your custom rom...

saphirrot said:
1. Flash Stock Rom WITH BOOTLOADER !!!
2. Problem should be solved :/
OR
Get a stock rom from KIES !
after that you can apply your custom rom...
Click to expand...
Click to collapse
Bit of a problem with that matey, Kies says the phone does not support firmware updates through KEIS and the rom i've been flashing with KEIS is the full standard rom from Vodafone- includes CSC, PDA and phone files. from memory the PDA file contains the standard bootloader yeah?

Look at this
Take a Firmware with the red SBL ending, thats with bootloader, flash it in download mode via odin and the problem should and must be solved through this !!
btw: i recommend to flash a JW5 version.. please tell us if this worked !

Did you get a look at the error? Or try flashing the cf root kernel?
Sent from my GT-I9000 running remICS-UX using XDA premium

saphirrot said:
Look at this
Take a Firmware with the red SBL ending, thats with bootloader, flash it in download mode via odin and the problem should and must be solved through this !!
btw: i recommend to flash a JW5 version.. please tell us if this worked !
Click to expand...
Click to collapse
GT_I9000_XWJVP_XXJVQ_VAUJV6_Sbl is the firmware i'm using, so no good with the boot loader
I'll try a JW5 version as suggested .
Also to the guy above, no luck with getting the error message, i'll give it another flash now and see how it goes.
Cheers guys really appreciate it

[Q] What have i done? medium brick?

Hi XDA, i'm having problems with my SGS.
the case is, i accidently formated "/boot" and now i cannot boot into recovery, only download mod and i can't flash stock via DM, it gives me this error: <ID:0/008> Can't open the serial(COM) port.
is it possibole to retrive my phone without JIG?

The only thing a jig does is enter download mode. Not sure what DM is, but have you tried flashing with ODIN?

Put phone into download mode and flash a stock ROM with Odin from samfirmware.com these stock ROMs contain the secondary bootloader the you erased. You will be fine after that.
Sent from my GT-I9000 using xda premium

AlwaysDroid said:
Put phone into download mode and flash a stock ROM with Odin from samfirmware.com these stock ROMs contain the secondary bootloader the you erased. You will be fine after that.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
LOL, actually i forgot to write here, i fixed my phone already in that way by flashing the original ROM from orange.
thx, mods can close this thread if they want to.

Hello, i have problem with phone.

So here's my problem: I get this picture where is phone and computer and in middle of em is warning triangle. PM ME TO GET THE PHOTO LINK. when i try to reboot phone after trying to install: [ROM][4.1.2][JZO54K] AOKP JellyBean Alpha 3 [29-12-2012]
i have gotten these done: Use CWM6 or TWRP.
For flashing with Odin: recovery-clockwork-6.0.1.2-ariesve.tar.md5 (Needs AriesVE.ops)
For using dd command to flash: recovery-clockwork-6.0.1.2-ariesve.zip
TWRP-Thread
Wipe Data/Factory Reset in Recovery (only needed when comming from Stock, ICS or CM10)
Flash AOKP
but cant get trough Flash the GApps Package (Addons Section), my odin just crashes on it.
I need hard reset or help to install that GApps Thanks in advance!!

I think that Gapps is flashed through recovery (install zip from sdcard) and not Odin as it is just a zip file and not a tar file.

cant get phone on, and cant get to recovery because of that error screen with phone -- warning triangle -- computer.. why

Try download mode volume down-home-power buttons at the same time if that doesn't work you are going to need a USB jig
Sent from my GT-I9000 using xda app-developers app

And I don't think your meant to dd a recovery
Sent from my GT-I9000 using xda app-developers app

have a look here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1

Yeah, thanks! I got trough that part but cant flash anything! =O im stuck either in: <1> setup connection... or then: <1> VerifyPlatform:V0, P0,R0
Help please!

have you tried flashing a stock rom to see if you can get any further?

OK 1. Try reinstalling drivers 2. Different USB make sure its a Samsung one 3. Use a 3 file .tar like darkyrom ressurection edition 4. Use a different computer. No.3 will be necessary for recovering your phone
Sent from my GT-I9000 using xda app-developers app

http://www.youtube.com/watch?v=1RoZU5ZPMS4
check this out dude helped me good luck

Semi-Brick....could be the eMMC brick!?!?

Hello all,
I recieved a Galaxy Note for repair from a friend of mine. She says that the phone was working normally until it rebooted and then didnt get past the first Samsung Galaxy Note Logo.....she took it to samsung who said it was a faulty motherboard (hint: possible eMMC brick, though in India, thats their go-to response). The phone now shows a firmware upgrade failed sign (PHONE----------!-----------PC) telling me to plug it into Kies, which doesnt recognize it. It doesnt go into recovery mode at all but goes into download mode. I opened odin and flashed a stock gb rom with pit file(repartition ticked). The phone gets stuck at Set Partition. Have tried different Odins, different USB Cables, ticking diff. options in odin and god knows what else. How do i get this phone up and running? Is it the emmc brick bug? I think it is...

did you kill kies processes before using odin?

Yup. Done already....no change

if it gets stuck at repartition process, then its more than an eMMC brickbug. How its the phone right now?, can you go to recovery?. The best you can do: flash a safe kernel and then a cyannogenmod (or AOSP) rom, if it boots (probably you will get a lot of force closes), try to flash a jelly bean stock rom (without repartition) and then repartition it.
If still not work, the last option its jTag (riff box), it will repartition the whole phone.
Sorry my bad english

Hmmm, I'm not sure about that last part, but if I do it without repartition, it gets stuck at nand write of cache. Right now, it either goes into upgrade failed connect to kies sign or into download mode, both of which I'm guessing are the same

try uninstall and reInstall you samsung usb driver...
http://forum.xda-developers.com/showthread.php?t=961956
and try use other pc odin version..
try flash without repartition.

Checked. Same issue

xyancompgeek said:
Checked. Same issue
Click to expand...
Click to collapse
Odin stuck on?..
lets try flash kernel using pc odin
http://forum.xda-developers.com/showthread.php?t=1901191

Odin is stuck on this screen. Phone is in download mode. Cannot go into recovery.

You might need a usb jtag thing.maybe that will help in getting ur phone 8dentifiedby odin
Sent from my GT-N7000 using xda app-developers app

It is recognized by Odin, it just cant flash anything. One thing though, odin 3.07 atleast has the courtesy to tell me that it failed on set partition, odin 1.85 gets stuck at set partition.

what are you trying to do? you are only selecting the PIT file and nothing else in Odin. use the Original PIT not modified one with the rom file in PDA .
Nothing more is supposed to happen if only PIT file is added to odin. Donot use a custom PIT file till its confirmed a EMMC corruption.. use the original PIT file from Dr Ketans Guide in Original Dev Section