Database Develop

open recover v1.14

open recover v1.14 can be used to create nanodroid backups,restore,also u can root from open recovery .it is done loaded the same method as an update zip
Features:
- rooting the phone from menu
- nandroid backup/restore from menu
- apply update *.zip files from menu (located in OpenRecovery/updates under the sdcard root folder, there is a sample one (just unpacks a file named "babble" to /system), no signatures are needed
- wipe data (factory reset)
- wipe cache
- adb in recovery
- run a script
i take no credit just found the file http://modmymobile.com/forums/downloads.php?do=file&id=28090&act=down

Already in the sticky thread right above you. Please reply to the existing thread and not start a new thread. Let's try to keep the forum clean

Get root to have new rom

Hello guys I have black with stock rom I want to install custom rom CM9
Code:
http://forum.xda-developers.com/showthread.php?t=1650537
Install CM9 on black:
Instructions:
Download the FreeOptimusProject-xxx.zip
Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
Enter CWM and:
- Select 'backup and restore -> Backup' (not necessary but recommended)
- Select 'wipe data/factory reset' (Obligatory)
- Select 'wipe cache partition' (Obligatory)
- Select 'advanced/wipe Dalvik cache' (Obligatory)
- Flash the FreeOptimusProject-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the FreeOptimusProject-xxx.zip
Reboot (first boot will take ~3 mins)
but I should install recovery mode first
Code:
http://forum.xda-developers.com/showthread.php?t=1098083
How to install recovery mode:
1. Extract ZIP-File to your Local Computer
2. Connect the Phone with USB-Debugging enabled
3. Run The File install_recovery.bat (on Windows Systems) or install_recovery.sh(on Linux Systems)
4. Grant Root Access on the Phone
also but I should get the root access first
but how i used gingerbreak but it doesn't success
in my previous phone I flashed other firmware then I rooted it but in black I don't know how to flash this fw (before,I was using kdz uploader) and what is the good fw for rooting then flashing new rom
please quickly
thnx in advance

hemo-ali said:
Hello guys I have black with stock rom I want to install custom rom CM9
Code:
http://forum.xda-developers.com/showthread.php?t=1650537
Install CM9 on black:
Instructions:
Download the FreeOptimusProject-xxx.zip
Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
Enter CWM and:
- Select 'backup and restore -> Backup' (not necessary but recommended)
- Select 'wipe data/factory reset' (Obligatory)
- Select 'wipe cache partition' (Obligatory)
- Select 'advanced/wipe Dalvik cache' (Obligatory)
- Flash the FreeOptimusProject-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the FreeOptimusProject-xxx.zip
Reboot (first boot will take ~3 mins)
but I should install recovery mode first
Code:
http://forum.xda-developers.com/showthread.php?t=1098083
How to install recovery mode:
1. Extract ZIP-File to your Local Computer
2. Connect the Phone with USB-Debugging enabled
3. Run The File install_recovery.bat (on Windows Systems) or install_recovery.sh(on Linux Systems)
4. Grant Root Access on the Phone
also but I should get the root access first
but how i used gingerbreak but it doesn't success
in my previous phone I flashed other firmware then I rooted it but in black I don't know how to flash this fw (before,I was using kdz uploader) and what is the good fw for rooting then flashing new rom
please quickly
thnx in advance
Click to expand...
Click to collapse
search for 20o patched bin and fls files and flash them with smartflash and from there flash any ROM you like.
CM9 is not suitable as an everyday rom, try another one, personally I will recommend you CM7 or Zeus(thou I dont know if the have LTR support).

In face I rooted it by unlock root before then I flashed the cm9
I detected the errors then I re-flashed the stock rom with smart flash tool
but now I want to root again I can't
why???
also is cm7 stable and can I download it from cm website directly or where can I download it??
is cm7 supports rtl support(especially arabic)??
Is cm7 have thread in this forum??

Patched v20o comes with cwm recovery so from there you can flash any rom, yes you should.always get cm from official site or look for temasek kang in general forum.
FDN

re4lsk said:
Patched v20o comes with cwm recovery so from there you can flash any rom, yes you should.always get cm from official site or look for temasek kang in general forum.
FDN
Click to expand...
Click to collapse
hey I flashed v20O but unlock root doesn't success to root it why???

oh sorry i didn't download patched one
now I will download patched V20b(no matter which one)
I want it only to flash cm7 and in future cm9(when bugs are fixed by our heros)
thnx all wait for my feedback

I flashed it successfully thnx but when I used cm7 rom I don't have market and when I installed it Now I cannot add gmail account why??

Done I flashed the gapps zip file thnx
Sent from my LG-P970 using XDA

[Q] Installation process (RocketROM v1 - JB) -- Confusion

Hi,
I am sorry if this question is asked earlier. i tried searching but didnot find any thread related to my problem
I am planning to install Rocket Rom v1 - JB with below mentioned process as described in actual thread.
i have a confusion, process says "copy ROM on your USB-storage". i want to ask, is it actually USB storage or does it mean ext SD card.??
Installation:
make sure you are on a rooted ICS-ROM or JB-ROM with CWM recovery and brickfree kernel installed
copy ROM on your USB-storage
boot in Recovery
FullWipe (also when coming from other Sammy-JB-ROM!)
flash ROM (it will reboot automatically in most cases)
after initial setup, open Super SU-app and you have to update SU-bin (app will do that for you if necessary!)
enjoy
Click to expand...
Click to collapse
Thanks

RR V1_JB
I will tell you how to flash Rocket Rom v1 JB
1. Download rom.zip
2. copy rom.zip to internal memroy or SD card
3. Flash any safe Kernels like Philz, Hydracore, Abysis Kernel
4. Reboot in recovery
5. Do Data wipe, wipe cache partition and dalvik cache
6. choose Install ZIP from SD card
7. select internel or external sd card in which you have copied rom.zip
8. choose the rom.zip file and flash it
9. it will automatically reboot after flashing
10. wait for sometime to get the mobile to boot to new rom
11. once you have got home screen, then reboot again
12. then after coming homescreen check menu button is working or not
13. if not working then reboot recovery
14. do Do Data wipe, wipe cache partition and dalvik cache again
15. flash rom again
16. now your home button issue will get resolved
17. Enjoy new rom
If you have Music Player Force close Then do the following
1. install root explorer
2. download music Player.apk (http://www1.zippyshare.com/v/85093893/file.html)
3. download musicfx.apk (https://www.dropbox.com/s/xt3jkrfa7w6ni43/MusicFX.apk)
4. copy music player.apk and musicfx.apk to root/system/apps and set permission to rw and then reboot
5. Now music Player will be working fine

[Q] Installing RomAur by Auras problems

Hi there!
I'm trying hard to get the custom rom RomAur running at my Xperia Z but I'm having some trouble to finally installing it.
Thread to the Rom: http://forum.xda-developers.com/showthread.php?t=2167064
What has to be done:
1 - Unlock bootloader - http://unlockbootloader.sonymobile.com/
2 - Copy rom to ext sdcard
3 - This rom if come without kernel , to get recovery flash DooMLoRD advanced stock kernel - http://forum.xda-developers.com/show....php?t=2167381
4 - Enter to recovery
5 - Make sure to do a Factory Reset/ Wipe data / system/cache before installing ROM
6 - Install rom
7 - Reboot system
8 - On disable flash recovery stock say no to get init.d support
9 - Enjoy
What I managed so far:
1 - Unlock bootloader - http://unlockbootloader.sonymobile.com/
2 - Copy rom to ext sdcard
3 - This rom if come without kernel , to get recovery flash DooMLoRD advanced stock kernel - http://forum.xda-developers.com/show....php?t=2167381
4 - Enter to recovery
Problem is: After doing a factory reset I don't know how to finally install the custom rom. Could somebody help me with that? If I manage to get it working on my Xperia Z I will write a step by step-guide to install custom rom with that phone.

Hi There,
Maybe you should have posted this into the forum of the Rom.
But to install it - once you have copied the Zip file to your device - you select 'Install from Zip' from the main menu of the recovery - select the Zip file and wait while it installs - reboot - Done!
Cheers
Paul

harrytipper said:
Hi there!
I'm trying hard to get the custom rom RomAur running at my Xperia Z but I'm having some trouble to finally installing it.
Thread to the Rom: http://forum.xda-developers.com/showthread.php?t=2167064
What has to be done:
1 - Unlock bootloader - http://unlockbootloader.sonymobile.com/
2 - Copy rom to ext sdcard
3 - This rom if come without kernel , to get recovery flash DooMLoRD advanced stock kernel - http://forum.xda-developers.com/show....php?t=2167381
4 - Enter to recovery
5 - Make sure to do a Factory Reset/ Wipe data / system/cache before installing ROM
6 - Install rom
7 - Reboot system
8 - On disable flash recovery stock say no to get init.d support
9 - Enjoy
What I managed so far:
1 - Unlock bootloader - http://unlockbootloader.sonymobile.com/
2 - Copy rom to ext sdcard
3 - This rom if come without kernel , to get recovery flash DooMLoRD advanced stock kernel - http://forum.xda-developers.com/show....php?t=2167381
4 - Enter to recovery
Problem is: After doing a factory reset I don't know how to finally install the custom rom. Could somebody help me with that? If I manage to get it working on my Xperia Z I will write a step by step-guide to install custom rom with that phone.
Click to expand...
Click to collapse
at CWM..please select install zip from external sd. then you will finally install the rom. did u managed to go into CWM interface? i assume yes since u already done factory reset.

doki81 said:
at CWM..please select install zip from external sd. then you will finally install the rom. did u managed to go into CWM interface? i assume yes since u already done factory reset.
Click to expand...
Click to collapse
So far I managed to install the advanced stock kernel and get root on my device (using fastboot.exe and BusyBox). So after that I enter recovery mode using Quick Boot. Then I have to do factory reset as found in preferences on my device. So far I think I got it.
But after that I have to wipe my data, system and cache. How do I do that and go on with the steps upcoming? After doing that I normally have to configure the device again for letting me use Recovery Manager and stuff like that, or don't I? So how should I do the full wipe?
Thank you for your suggestions so far!

harrytipper said:
So far I managed to install the advanced stock kernel and get root on my device (using fastboot.exe and BusyBox). So after that I enter recovery mode using Quick Boot. Then I have to do factory reset as found in preferences on my device. So far I think I got it.
But after that I have to wipe my data, system and cache. How do I do that and go on with the steps upcoming? After doing that I normally have to configure the device again for letting me use Recovery Manager and stuff like that, or don't I? So how should I do the full wipe?
Thank you for your suggestions so far!
Click to expand...
Click to collapse
the next step you should do is to flash the CWM..
follow guide in this post http://forum.xda-developers.com/showthread.php?t=2167381
afterward you can do full wipe from the CWM and proceed to use CWM install zip function to flash the new aur rom.

paulrgod said:
Hi There,
Maybe you should have posted this into the forum of the Rom.
Paul
Click to expand...
Click to collapse
Sorry, I thought this was the right place to ask, because I don't want to spam in other forums. Maybe you could move it?
paulrgod said:
But to install it - once you have copied the Zip file to your device - you select 'Install from Zip' from the main menu of the recovery - select the Zip file and wait while it installs - reboot - Done!
Paul
Click to expand...
Click to collapse
I tried both ways, copying the zip file to root of the device itself and onto sd card (RomAur V1.1 XZ C6603.zip, FAT32 formatted 16 gb sd card). But Recovery Manager doesn't show any of these files when I chose to install from sd card.
sorry for my english, I'm not a native speaker :silly:

doki81 said:
follow guide in this post http://forum.xda-developers.com/showthread.php?t=2167381
Click to expand...
Click to collapse
ok, I'll do that again. I tried this yesterday already and so I do have a few questions:
from the guide you sent me:
download the advanced stock kernel (contains recovery)
reboot device into fastboot mode
Code:
adb reboot bootloader
now flash the recovery using
Code:
fastboot flash boot kernel.img
[where kernel.img is the name of the file image u downloaded]
thats it!
As I use "adb reboot bootloader" it keeps telling me "error: device not found", even though its connected to PC using fastboot mode and "fastboot devices" shows my Xperia Z as connected in fastboot mode. What do I do wrong?
Second question: Is the advanced stock kernel with recovery the one I already installed? Z_DooMLoRD_insecure_FW-350.img? Or Z_DooMLoRD_CF-Auto-Root-ported_FW-350.img? So which kernel do I use in the last step?

I finished it and I just made some stupid mistake in my procedure (I was alredy wondering how Xperia Z can be so hard to put a new rom into..). I'll write a How-To for newbies the until monday. Thanks for your help so far!

How to install RomAur (and other ROMS) on Sony Xperia Z
This is how I managed to install RomAur at my Xperia Z. After realizing my mistake I noticed it's not much different to other android devices.
1. So first to install kernels and get root I unlocked the boot loader using this really good descriptions:
http://unlockbootloader.sonymobile.com/
http://www.techethon.com/root-sony-xperia-z-tutorial-easy-how-to/
http://forum.xda-developers.com/showthread.php?t=2153261
2. Then I started the device in fastboot mode by pressing volume + while connecting to PC and used fastboot.exe (shift+right click in the containing folder to start cmd) typing in this:
fastboot flash boot Z_DooMLoRD_AdvStkKernel_FW-350_v2.img
IMPORTANT Z_DooMLoRD_AdvStkKernel_FW-350_v2.img was contained in the same folder as fastboot.exe. Maybe there is already another new kernel to do this with, this one worked for me. Starting the device in fastboot mode can also be achieved by usind this command before flashing with the new kernel: adb reboot bootloader
3. Anyway after flashing I typed in this: fastboot reboot
4. Then I've put the zip file onto my micro sd (fat32 formatted, 16gb) and restarted the device disconnected from PC. This is what I've done wrong :silly:
While the device went on I pressed volume + when the SONY screen showed up and the led started to flash in several colors.
5. Now in the menu wiped/cleared/formatted everythin except the external sd-card and installed the "update" by using volume buttons to navigate and power button to confirm.
This is what worked for me. I might have forgotten some stuff so in case there might be something to add, just reply on this!

[Q] Help Needed! Two strange isseus after iHakers 1.1 install!

Hi!
Just flashed iHackers V1.1-CR last night by following 100% the tutorial:
CR-Link: http://forum.xda-developers.com/showthread.php?t=2539008
HowTo:
Install Oficial FTF for Firmware 14.1.G.1.534.
Root Your Phone Using VRoot or KingoApp Root.
Backup TA Partition.
Copy the ROM to External SDCard.
Install Dual Recovery for LB.
Reboot into Recovery.
Make Sure to do a Wipe Data/Factory Reset before Installing the ROM.
Start the Installation. (Install Zip >> Choose Zip for External SDCard).
Switch Off Your Phone (Do Not Reboot). Select No to Disable Flash Recovery Confirmation.
Install Kernel.ftf .257 C6903 or Kernel.ftf .257 C6902 with Flashtool
Reboot and Enjoy.
I did as following:
- installed ADB-drivers
- installed Kingo-Root
- installed Flashtool-drivers
- installed Flashtool
- unpacked Dual-CWM-files
- unpacked TA-Backup
- unbox Z1
- boot
- check firmware (was something about 51x or so)
- downloaded firmware 534
- started Z1 within Flashmode
- connected Z1 with USB-cable to PC
- pressed 'volume -* + green LED blinked
- started installed 'Flashtool'
- pressed the 'Flash'
- picked 'Flashmode'
- picket 534-firmwarefile
- flashed
- unplugged cable
- reboot
- set up google-account
- DID not made OTA-Update
- stopped Auto-App-restore from Google Play
- went to XPERIA-conectivity-options
- PC-Compagnion-install disabled
- picked correct USB-connection-modus
- ticket allow unknown source-install
- ticket USB-debugging within developer-menu
- started Kingo
- plugged Z1 with USB-cable
- waited till driver/stuff was synched
- 'Root'-option was able to be clicked
- clicked
- 'Root succeeded' appears
- did an TA-Backup and ticked SuperSu-request while backing up
- put iHackers V1.1 onto external SD-card
- went to 'Dual-CWM'-folder and double-clicked 'Run.bat'
- CWM-window appeared
- clicked 1 (= SuperSU)
- once done, Z1 rebooted into recovery
- rebooted into recovery once again
- did complete Nandroid-backup
- did Wipe Data, factory Reset + Davlik
- installed ROM by using my options I would have to be installed
- installed 257-Kernel with Flashtool -> Flashmode -> pickde Kernelfile -> flashed
- Reboot
- installed ALL needed apps
- did ALL settings I would like to use
ISSUES:
1) Dual-CWM:
- has gone -> tried to re-install -> failed -> 'Waiting for Device' for a long time without any progress
2) Camera:
- while ticking 'camera' it shows message: 'Sorry but camera was shut down' -> OK
HOW TO GET DUAL-CWM BACK?
HOW TO GET CAMERA BACK TO NORMAL?
Once those two issues are solved, HOW TO GET NEW iHACKERS V1.2 INSTALLED WITHOUT GETTING THOSE TWO ISSUES AGAIN?
Thanks a lot,
DES75

Did you unlock your bootloader? that can explain the camera issue. btw you should post of the IHackers Thread not create your own thread in general section

1) downgrade and try again, this time flash the .zip for dual recovery AFTER flashing the rom and BEFORE rebooting (EDIT before trying that, make sure you have granted ADB shell root access in superuser app)
2) Clear data in settings/app/camera common

Morlock O said:
Did you unlock your bootloader? that can explain the camera issue. btw you should post of the IHackers Thread not create your own thread in general section
Click to expand...
Click to collapse
Hi!
I did all written stuff! I didn't unlock BL at all! Within all those stuff, nothing appeared to open BL!
OR
Is there an option within FLASHTOOL which will open BL while flashing Firmware and/or 257-Kernel?
BTW:
I'm not allowed to post within iHackers-thread!
Thx + BR,
DES75

DESASTER75 said:
Is there an option within FLASHTOOL which will open BL while flashing Firmware and/or 257-Kernel?
Click to expand...
Click to collapse
If you do not know the answer to that I would you suggest you stay away from unlocking the bootloader until you have learned a few basics

gregbradley said:
If you do not know the answer to that I would you suggest you stay away from unlocking the bootloader until you have learned a few basics
Click to expand...
Click to collapse
Hi!
How to do downgrade!
thx

DESASTER75 said:
Hi!
How to do downgrade!
thx
Click to expand...
Click to collapse
Flash a 534 FW in flashtool, you did it before on your list

gregbradley said:
Flash a 534 FW in flashtool, you did it before on your list
Click to expand...
Click to collapse
534 flah
something to umcheck within flashtool
after flash, how to proceed to het Ihackers installed

DESASTER75 said:
534 flah
something to umcheck within flashtool
after flash, how to proceed to het Ihackers installed
Click to expand...
Click to collapse
Like this
DESASTER75 said:
Hi!
- started Z1 within Flashmode
- connected Z1 with USB-cable to PC
- pressed 'volume -* + green LED blinked
- started installed 'Flashtool'
- pressed the 'Flash'
- picked 'Flashmode'
- picket 534-firmwarefile
- flashed
- unplugged cable
- reboot
- set up google-account
- DID not made OTA-Update
- stopped Auto-App-restore from Google Play
- went to XPERIA-conectivity-options
- PC-Compagnion-install disabled
- picked correct USB-connection-modus
- ticket allow unknown source-install
- ticket USB-debugging within developer-menu
- started Kingo
- plugged Z1 with USB-cable
- waited till driver/stuff was synched
- 'Root'-option was able to be clicked
- clicked
- 'Root succeeded' appears
- did an TA-Backup and ticked SuperSu-request while backing up
- put iHackers V1.1 onto external SD-card
- went to 'Dual-CWM'-folder and double-clicked 'Run.bat'
- CWM-window appeared
- clicked 1 (= SuperSU)
- once done, Z1 rebooted into recovery
- rebooted into recovery once again
- did complete Nandroid-backup
- did Wipe Data, factory Reset + Davlik
- installed ROM by using my options I would have to be installed
Before rebooting and after flashing the rom flash this Z1-lockeddualrecovery2.7.43-BETA.zip (7.58MB) from here
- installed 257-Kernel with Flashtool -> Flashmode -> pickde Kernelfile -> flashed
- Reboot
- installed ALL needed apps
Click to expand...
Click to collapse

gregbradley said:
Like this
Click to expand...
Click to collapse
Hi!
So just do the whole procedure (beginning from first line) once again? It's not the prob, just want to be 100% safe!
And after that, you think that ...
- Dual-CWM will be installed
- Camera-issue will have been gone
- iHackers V1.2 will be installed
Thx

DESASTER75 said:
Hi!
So just do the whole procedure (beginning from first line) once again? It's not the prob, just want to be 100% safe!
And after that, you think that ...
- Dual-CWM will be installed
- Camera-issue will have been gone
- iHackers V1.2 will be installed
Thx
Click to expand...
Click to collapse
There is no need to do it all again, but the issue will be gone if you flash that file when I say and if you clear data in settings/app/camera common

gregbradley said:
There is no need to do it all again, but the issue will be gone if you flash that file when I say and if you clear data in settings/app/camera common
Click to expand...
Click to collapse
Hi!
1) So I should use Flashtool to get this *.zip flashed onto Z1 NOW or should it be flashed onto Z1?
2) Already cleaded data from 'camera common' but still same camera-prob
Thanks for your great support

1) Use flashtool to flash 534
2) Root it
3) Let it update OTA
4) Install DualRecovery from here
5) Enter Recovery, factory reset, clear cache, clear dalvik.
6) Follow the installation guide to install the rom of your choice. The only thing to do differently is AFTER flashing the rom.zip and BEFORE rebooting flash the .zip file I mentioned in the earlier post.
6) Reboot
7) Done

gregbradley said:
1) Use flashtool to flash 534
2) Root it
3) Let it update OTA
4) Install DualRecovery from here
5) Enter Recovery, factory reset, clear cache, clear dalvik.
6) Follow the installation guide to install the rom of your choice. The only thing to do differently is AFTER flashing the rom.zip and BEFORE rebooting flash the .zip file I mentioned in the earlier post.
6) Reboot
7) Done
Click to expand...
Click to collapse
Hi!
Sorry, I'm really a bit nooby and just want to be 100% safe!
1) Use flashtool to flash 534 (connect Z1 with PC, start flashtool, flash, Flashmode, pick 534-firmware, flash)
1-2) reboot
2) Root it (Kindo)
2-1) reboot
3) Let it update OTA (just download OTA + install)
4) Install DualRecovery (file name: ZU-lockeddualrecovery2.7.42-BETA.windows.zip) - (unpack on PC, double-click *.bat, install by using 'supersu')
4-1) reboot and hold 'Volume +'
5) Enter Recovery, factory reset, clear cache, clear dalvik.
5-1) iHacker 1.2 on external card
5-2) install zip from ... + follow instructions
6) Follow the installation guide to install the rom of your choice.
6-1) NO REBOOT
6-2) stay in recovery and install zip from external card and flash the 'Z1-lockeddualrecovery2.7.42-BETA.zip''
6) Reboot
7) Done
That's it?
Please finally confirm,
DES75

yes

gregbradley said:
yes
Click to expand...
Click to collapse
you are probably the most patient person on a forum I ever met.

jontr said:
you are probably the most patient person on a forum I ever met.
Click to expand...
Click to collapse
I have my moments
Sent from my C6903 using XDA Premium 4 mobile app

Hello!
I did like following but got problem (marked in red)! Do someone know how to get that fixed?
1) Use flashtool to flash 534 (connect Z1 with PC, start flashtool, flash, Flashmode, pick 534-firmware, flash)
1-2) reboot
2) Root it (Kindo)
2-1) reboot
3) Let it update OTA (just download OTA + install)
4) Install DualRecovery (file name: ZU-lockeddualrecovery2.7.42-BETA.windows.zip) - (unpack on PC, double-click *.bat, install by using 'supersu')
4-1) reboot and hold 'Volume +'
5) Enter Recovery, factory reset, clear cache, clear dalvik.
RECOVERY IS NOT ABLE TO LOCATE/GET FILE FROM EXTERNAL SD!!! ALL FILES ARE ON EXTERNAL SD BUT RECOVERY SHOWS EXTERNAL SD WITH 0BYTES!!! SO HOW TO GET MY EXTERNAL SD WORKING WELL???
BTW (before someone is asking):
The external SD already checked on PC and on PC, on an EEEPC and on an other smartphone, that SD is working well!
would like to proceed the following steps, too:
5-1) iHacker 1.2 on external card
5-2) install zip from ... + follow instructions
6) Follow the installation guide to install the rom of your choice.
6-1) NO REBOOT
6-2) stay in recovery and install zip from external card and flash the 'Z1-lockeddualrecovery2.7.42-BETA.zip''
6) Reboot
7) Done
Thanks a lot for your kind support and have a nice weekend,
DES75

Just put the required file on the internal sdcard...

gregbradley said:
Just put the required file on the internal sdcard...
Click to expand...
Click to collapse
Hi!
That's not working, too!
Anyone an other idea?
Thx,
DES75