Related
Ok I know there are several several threads to this problem. I've searched in and out but still am just sitting and staring at the symbol getting crazier by the minute.
I did a foolish foolish thing by flashing the 3 button SPL in the wrong way.. I kept the re-partition button ticked and kaboom this problem arised.. and the PC does not even recognize the phone.
I'd be grateful if someone helps me or by chance posts something which I've not tried yet! and Nope I wont do the heating trick..
For the info.., my recovery/any modes are not working from phone itself only used to work from the PC using adb. Now that too doesnt work!
Thanks a lot for taking time to read and answer!
Sadly I have to say that your phone was properly bricked since it has no download mode, you cannot use Odin to reflash other firmware.
Your situation is the same as mine, 3 weeks ago, I tried to fix 3 buttons combo to enable recovery/download mode but it was failed and my phone could not start up.
Now there is only one solution to rescue your bricked phone, that is RIFF JTAG box. My phone was rescued successfully by that box.
Sent from my GT-I9000 using XDA App
Thanks Stephen for your reply.. Other replies please...
You have to know that if the phone can enter download mode by pressing 3 buttons combo then you can re-flash it with another firmware by using Odin, otherwise you cannot do anything to make it boot up because its boot area had been corrupted.
My phone is under warranty.. so can Samsung service centre guys do something about it?
aussiesuree said:
My phone is under warranty.. so can Samsung service centre guys do something about it?
Click to expand...
Click to collapse
yes, you can take it back to samsung for repairs
or you can flash it back yourself using Odin
@Allgamer.. I've tried everything I could bro.. used Odin 4.3, Odinepic1.3 but no use... and my 3 button technique is disabled in my phone Damn why does it have to happen to me when am outta my city
did you try with the usb cable plugged in?
or the battery pop in when the 3 buttons are held
or the heat trick with the hair dryer?
Yeah tried with cable plugged in and also the battery pop in..
I dont have a hair dryer with me at the moment. I mean not that I cannot borrow one, but am a bit scared to try it since it might affect the life of my phone..
Thanks for helping Allgamer bro! Appreciate it.
Hmm anyone found a way to get into download mode with 3 button mode disabled yet?
Finally gave my phone to the service center Hope they treat it well.. and hope they enable the 3 button modes ...
Hmm finally got my beast back from the service centre. And guess what they have enabled the 3 button mode for me yippee
Sent from my GT-I9000 using XDA App
aussiesuree said:
Hmm finally got my beast back from the service centre. And guess what they have enabled the 3 button mode for me yippee
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Did they disassemble your phone? And how about the warranty?
Sent from my GT-I9000 using XDA App
Yeah they had to replace a board they said... Some pba board the receipt says.. Don't know what so ever that means
Forgot to mention.. Since it was under warranty I wasn't charged a single penny
Sent from my GT-I9000 using XDA App
Dont know why they had to replace the board, the problem does not concern with hardware, it's just a software issue, exactly is the boot loader was corrupted so the store that I send my phone to took only $15.
Sent from my GT-I9000 using XDA App
Yeah but the thing is I did some weird things by mistake like keeping the repartition box checked while flashing etc... So might be that might have blown something off...
Anyway am happy to have my phone back with the recovery and download modes ) Doesnt matter what they changed as long as my phone keeps me busy
Title pretty much said it. Out of careless mistake I flashed 3 button fix stock jf6 rom over a gb rom. Hard bricked. On Odin it said the flashed is completed with no error, and success. So just wondering if there is any trace left in the phone AT&T or samsung could trace it down to fire a back charge on me? Or anyone that warranty their phone for the same reason had heard anything from AT&T. Thanks in advance.
P.S I do have some custom rom and kernels zips on the buildin flash. Is it against privacy for AT&T or samsung to check those stuff if they do manage to bring the phone back to alive?
Honestly if they can get you phone back up they are going to nuke it. You should be fine
Sent from my SGH-I897 using XDA Premium App
why dont you get connexion2005 to fix it, hes tying to perfect his jtagging service and offering free repairs atm
could really help out the rest of the community when warranty replacement is no longer an option...
check his thread right here!! http://forum.xda-developers.com/showthread.php?t=1041042
I would if this phone is out of warranty. Kinda tight on wallet recently to play around with stuff or I may get a rift jtag to try it myself. Thx for the clarification tho both of u
No, money required ... He's offering it for free!!
And it will help out all of us in a couple months when we can't return them for a warranty replacement and 3rd party jtagging is the only option...
Just sayin...
Yeah. Time is ticking away at that warranty lol
Sent from my GT-I9000 using XDA Premium App
Hello. Sorry for my english.
I've been living on the edge, like many of us LOL, and i finally got hard bricked. No battery charge, logo, download mode. Nothing. Just a black screen.
I was using ICS stunner 1.4.26 and decided to flash Catastrophic Meltdown 9 (CM9 for friends). The problems was that my battery died when it was installing the kernel, or the boot, i dont know.
So, i have been reading a lot those days but nothing seems to work. I have ordered a Jig but i think is not going to work. Yesterday i used windows, and something was detected when i plugged in the usb, but Odin not.Today it does not work, and windows doesnt play any sound. Any idea? A Jag?
I should say this is the best mobile phone i have ever touched. I would be eternal grateful with all of you if we could fix this mess. I was aware that there were risks. Im aware now maybe i cant fixit and im not gonna blame anyone because it was my responsability, but any help would be appreciated. Thanks.
Same thing happened to me, nothing worked (tried the JIG). I had to send it in for repair, but they didn't see that it was my fault (still had warranty).
nasdak10 said:
Hello. Sorry for my english.
I've been living on the edge, like many of us LOL, and i finally got hard bricked. No battery charge, logo, download mode. Nothing. Just a black screen.
I was using ICS stunner 1.4.26 and decided to flash Catastrophic Meltdown 9 (CM9 for friends). The problems was that my battery died when it was installing the kernel, or the boot, i dont know.
So, i have been reading a lot those days but nothing seems to work. I have ordered a Jig but i think is not going to work. Yesterday i used windows, and something was detected when i plugged in the usb, but Odin not.Today it does not work, and windows doesnt play any sound. Any idea? A Jag?
I should say this is the best mobile phone i have ever touched. I would be eternal grateful with all of you if we could fix this mess. I was aware that there were risks. Im aware now maybe i cant fixit and im not gonna blame anyone because it was my responsability, but any help would be appreciated. Thanks.
Click to expand...
Click to collapse
From my experience the only way u can get ur phone back in service is go to ssc and make some reasonable reason why ur phone is dead, so u can still claim for warranty and I am sure they will replace ur engine/mobo like my friends did a month ago.
Sent from my GT-N7000 using xda premium
nasdak10 said:
Hello. Sorry for my english.
I've been living on the edge, like many of us LOL, and i finally got hard bricked. No battery charge, logo, download mode. Nothing. Just a black screen.
I was using ICS stunner 1.4.26 and decided to flash Catastrophic Meltdown 9 (CM9 for friends). The problems was that my battery died when it was installing the kernel, or the boot, i dont know.
So, i have been reading a lot those days but nothing seems to work. I have ordered a Jig but i think is not going to work. Yesterday i used windows, and something was detected when i plugged in the usb, but Odin not.Today it does not work, and windows doesnt play any sound. Any idea? A Jag?
I should say this is the best mobile phone i have ever touched. I would be eternal grateful with all of you if we could fix this mess. I was aware that there were risks. Im aware now maybe i cant fixit and im not gonna blame anyone because it was my responsability, but any help would be appreciated. Thanks.
Click to expand...
Click to collapse
No download mode when you use the jig?
I feel your pain. Best wishes on resurecting that thing.
sorry to know. hope things will be Ok soon for you.
nasdak10 said:
I was using ICS stunner 1.4.26 and decided to flash Catastrophic Meltdown 9 (CM9 for friends). The problems was that my battery died when it was installing the kernel, or the boot, i dont know.
Click to expand...
Click to collapse
It has nothing to do with your battery dying and everything with trying to flash CM9 directly from super-dangerous LP5 or LP6 leak ICS kernel.
No jig or JTag will revive your phone now.
However, if your Note refuses to go into download or recovery mode, you are in luck - if you have a warranty, that is. Just take your phone to the service center and tell them that it died when updating via Kies. There is no way for them to tell what had really happened and they will have to replace your motherboard free of charge.
Sadly, jig didnt solve the problem. Battery isnt hot when plugged in, is my motherboard fried by flashing the note?
Could a jtag solve the problem?
Try to take it back in for warranty before attempting a JTAG and voiding the warranty (that they can tell)
Sent from my Nexus 7 using xda app-developers app
nasdak10 said:
Sadly, jig didnt solve the problem. Battery isnt hot when plugged in, is my motherboard fried by flashing the note?
Could a jtag solve the problem?
Click to expand...
Click to collapse
Yeah, that's a classic superbrick, need replacement mobo. Sorry dude. As mentioned just say you were updating ics ota or through kies.
Sent from my GT-N7000 using xda premium
I got the same problem few days back..I went to service center and said that i got an ota update and after downloading had completed,it started rebooting and there i got some errors and finally my phone is dead
They were unable to find the exact reason why it got bricked as it was unable to enter download or recovery mode
So they replaced the motherboard under warrenty
Better this it once
All the best :good:
I dont think that warranty thing is gonna work, because i have lost some inside cover screws... yeah, thats a long story trying to fix it. If i borrow a motherboard... could i recover my data? because thats all i want at the moment. Or, is there any website where i can buy it? Otherwise, im going to try it with the warranty...
nasdak10 said:
I dont think that warranty thing is gonna work, because i have lost some inside cover screws... yeah, thats a long story trying to fix it. If i borrow a motherboard... could i recover my data? because thats all i want at the moment. Or, is there any website where i can buy it? Otherwise, im going to try it with the warranty...
Click to expand...
Click to collapse
What cover screws??
If you change your motherboard,you will lose all your data
I just came back from the service center and they are covering it under warranty . Similar symptoms and they are going to replace the whole board. Just take it to the service center and say "Yo man your **** died on it own" :fingers-crossed:
Mr Colt said:
I just came back from the service center and they are covering it under warranty . Similar symptoms and they are going to replace the whole board. Just take it to the service center and say "Yo man your **** died on it own" :fingers-crossed:
Click to expand...
Click to collapse
Ivjust tried it bit couldnt get brick to occur no matter how hard i tried. Nm glad you got yours fixed
Sent from my GT-N7000 using xda app-developers app
Mr Colt said:
I just came back from the service center and they are covering it under warranty . Similar symptoms and they are going to replace the whole board. Just take it to the service center and say "Yo man your **** died on it own" :fingers-crossed:
Click to expand...
Click to collapse
Good to hear
Sent from my GT-N7000 using Tapatalk 2
hey all
i hv samsung galaxy pop cdma [indian version]
it got bricked while i tried updating it
from here:
"http://yagyagaire.blogspot.in/2011/12/how-to-upgrade-samsung-galaxy-pop-to.html#.UZot-bUzMTw"
its not working at all
i tried the following
>press the power button to switch it on
>tried entering into recovery mode
>tried entering into download mode
>connect it via usb to my computer and try pressing various combinations
NONE of these worked.
No response from the phone at all!!!:crying::crying::crying::crying:
please help me. :crying::crying:
i don't know what to do...please help me
Go to Customer care, act like a fool, tell them anything like u were upgrading from froyo to gb via kies and suddenly power went off and now device isn't booting at all
They will replace motherboard free of cost (if its in warrenty)
Sent from my GT-S5570 using xda premium
Not under warranty!
vishal007 said:
Go to Customer care, act like a fool, tell them anything like u were upgrading from froyo to gb via kies and suddenly power went off and now device isn't booting at all
They will replace motherboard free of cost (if its in warrenty)
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
:crying::crying::crying::crying:
thanks for the reply man
but
my phone is not under warranty
any other options ?
other than replacing the motherboard....there is something called a "JIG"...no clue though as to how it works.
can this be repaired at unauthorized service centers without replacing the motherboard....
ashut0sh said:
:crying::crying::crying::crying:
thanks for the reply man
but
my phone is not under warranty
any other options ?
other than replacing the motherboard....there is something called a "JIG"...no clue though as to how it works.
can this be repaired at unauthorized service centers without replacing the motherboard....
Click to expand...
Click to collapse
Only motherboard can help. JIG is working, but for total brick it won't work.
ashut0sh said:
:crying::crying::crying::crying:
thanks for the reply man
but
my phone is not under warranty
any other options ?
other than replacing the motherboard....there is something called a "JIG"...no clue though as to how it works.
can this be repaired at unauthorized service centers without replacing the motherboard....
Click to expand...
Click to collapse
Deja vu
This has happened with me too. Got my mini hard bricked and it was not under warranty. They will charge 5k for replacing the motherboard. I suggest you get yourself a new device instead of getting this repaired for 5000
Sent from my ST21i2 using Tapatalk 2
My frnd told me earlier, what he did was, he went to his frnd's shop and made a new fake bill with date for under warrenty
Now go to cc with fake bill, in countries like india this will work but this will work only if u havent gone to care before cuz once u go there, they have saved copy for bill for first time
Try this only if u dont have any other option left instead of buying a new device
Whats wrong in trying, worked for my frnd he was lucky enough
Sent from my GT-S5570 using xda premium
hey guys, so i have the LG Optimus 2X, P990-HN, i'm with Fido (doubt it matters) anyway, there was a large crack in my screen, and i just dealt with it for a long time, but eventually the glass FELL OUT, the rest of it worked, but i couldn't leave it, so i ordered a new Digitizer from DealExtreme.com and it was about $50 CAD, reviews tell me it worked, googled it nobody else had complaints, so i doubt it's a fake or anything, all the way from singapore, i put it in and i can see everything clearly through it, beautiful, but zero response from the touch screen. none at all in any area, what could it be? also, if i take the screen out to re-seat it do i need to apply heat and completely remove it, and if so will that make it garbage and need a new one? will the heat kill it? i'm quite upset because it costed 50 bucks and took a long time to get here, and i finally put it in and it doesn't work, all help appreciated!
Have you tried the service center ? One probable way to check if the new one really works is to connect the old one back and see if touch works.. You might have accidentally pulled out some other connection .. just my guess
Sent from my LG-P990
vkk178 said:
Have you tried the service center ? One probable way to check if the new one really works is to connect the old one back and see if touch works.. You might have accidentally pulled out some other connection .. just my guess
Sent from my LG-P990
Click to expand...
Click to collapse
if i take off thte new screen with a hair dryer, will that ruin the screen though?
Not sure about that . Is the new screen stuck on to the device like a sticker ? I recall seeing some YouTube videos on Optimus 2x surgery
Sent from my LG-P990
The digitizer , screen and the glass are usually a single unit .. yes any one of them is worn out , it can be replaced ... but u have to find d place where it s done ..
Sent from my GT-I9300 using xda app-developers app
skanda93 said:
The digitizer , screen and the glass are usually a single unit .. yes any one of them is worn out , it can be replaced ... but u have to find d place where it s done ..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
yes i ordered a digitizer though, replace it and it didnt work, what the hell could it be i just dont understand, and i can do it myself but i don't know the problem
I have done this twice with OK success. It is important to connect all electronics correctly - check YouTube for guides. But even if you did all correct be digitiser might be defect. Either you being it to service centre or redo digitiser install. Maybe, you can check before closing the phone, and if not working correctly check with your old digitiser. Heating and reheating should be no problem (although nothing is without risk). Good luck.
Sent from my LG-P990 using xda app-developers app
oneearleft said:
I have done this twice with OK success. It is important to connect all electronics correctly - check YouTube for guides. But even if you did all correct be digitiser might be defect. Either you being it to service centre or redo digitiser install. Maybe, you can check before closing the phone, and if not working correctly check with your old digitiser. Heating and reheating should be no problem (although nothing is without risk). Good luck.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
hey, thanks for helping me out. i think the digitizer MUST be defective, i took it apart and put the old SHATTERED one in, and it works FINE, aside from you know... being shattered. then i plugged the other NEW one in, and no response from the touchscreen. the ribbon wire looks to be fine, the connection to the logic board was fine, everything was hooked up right (or the other one wouldn't have worked right?) so if i cant SEE anything wrong with a digitizer, what could even be wrong with it, it MUST be defective, but what can really be defective about a digitizer? what can go wrong on something with so little to break...?
Don't know what is wrong, but it must have been defect before you got it. Try to return it to the seller/shop as soon as possible and get your money back.
Sent from my LG-P990 using xda app-developers app