Related
OK first of all I've put this together hastily so forgive me for slight errors, but most of this should be fine.
To flash your P3600i, there are 3 things that should concern you: HardSPL, the Radio, and the ROM.
HardSPL: something that allows you to run unsigned code on your phone (e.g. ROMs), and also provides protection in case it screws up. This is the first thing you do. (This is probably a **** explanation, but functional at least?)
Radio: I guess more like a mini feature set, I know there was something similar when I had a Motorola phone which was called a flex. In this case it's not a whole new operating system, but perhaps easily thought of as small tweaks made to improve the system without necessitating a whole ROM flash. Why have a radio when a ROM could take care of everything? Well the advantage of a radio is that you can flash these without resetting everything. Everything (contacts, etc.) remain intact.
ROM: What you're really after, WM6.1 and the lovely cooked ROMs that should soon be available for flashing. This will wipe everything on your phone, so back your stuff up (contacts, settings, owner info, messages, etc.).
Flashing procedure:
IF YOU HAVE VISTA: You need to update your drivers. Go here for instructions. You can then proceed with the procedure as per normal.
The basic procedure is this. Flash HardSPL first, then update your Radio, then finally, your ROM.
Note: The HardSPL you use is a modified one especially for the P3600i. Get it here.
Note2: Here is a mirror for the latest Radio for the P3600i. From following the guides, you will know when to use it. Get it here. (N.B. Radio link updated to v1.56.70.11 - 2 Aug 2008)
Go to the trinityguides.info guide (link here) and go through the procedure - and yes, I know the link points to page 2 of the guide.
NOTE WHEN FLASHING HARDSPL, IT WON'T WORK THE FIRST TIME - YOU WILL GET AN ERROR (CODE 260) LOLOL. THIS IS EXPECTED.
This is what happens.
You go to flash HardSPL like the guide says. LOOK AT THE SCREEN ON YOUR PHONE, YOU MIGHT HAVE SECURITY PERMISSIONS AND NEED TO MANUALLY ALLOW THE PROGRAMS TO RUN.
It looks like it's about to flash and then errors. BUT your phone is on the 3-colour bootloader screen! How odd. Well KEEP YOUR PHONE ON THE BOOTLOADER SCREEN, and unplug it from your computer. Exit the HardSPL program, RUN IT AGAIN, and FLASH THE PHONE AGAIN WITH HARDSPL (obviously connect your phone and stuff back to your PC).
The point here is this: the first time it will fail, but at least manage to get the bootloader up. With this bootloader up, exit the flashing program, restart it, and then you should be able to run the flashing program and have it complete.
DOUBLE CHECK YOUR PHONE HAS THE OLIPRO HARDSPL INSTALLED after completion, by soft-resetting (hold the power and camera buttons at the same time AND use the stylus to press the putton at the bottom of the phone. You might not get it the first time, but with practice you'll get the hang of it).
Once you can see 3.20 Olipro (yes, 3.20) on the bootloader screen, you know you have HardSPL on fine, and can proceed to the trinityguides.info instructions on flashing your radio and ROM. ROMs can be found in the P3600i ROM Collection thread, here.
Hopefully this should answer a lot of questions people have
Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o
o_sing_o said:
Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o
Click to expand...
Click to collapse
Simple answer is no. You should be able to flash Hard SPL from Vista if you follow the Trinitty guides to change the USB drivers to the XP ones.....PLEASE read the TRINITY GUIDES as stated above.
about the vista problem ... take a look: http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66
should i download the hard spl from here?
http://forum.xda-developers.com/showthread.php?t=398742
and what radio should i put? be specific...
Thanks
whatever radio you feel like, jesus, the level of stupidity just gets worse.
of course, if you're totally ****ing incapable of independent thought, we can spoonfeed you some arbitrary radio version.
Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.
gallevy said:
Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.
Click to expand...
Click to collapse
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol
Andych said:
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol
Click to expand...
Click to collapse
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?
gallevy said:
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?
Click to expand...
Click to collapse
Use the Hard SPL from the link...that is THE only one that works.
Radio 1.46.30 was the standard Radio and I now have 1.50.08.11
Check out the radios etc here http://forum.xda-developers.com/showpost.php?p=1951469&postcount=3
and choose the one that suits.
woot it works! thanks
zero_1984 said:
woot it works! thanks
Click to expand...
Click to collapse
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while
joncgde2 said:
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while
Click to expand...
Click to collapse
great to hear. the rom seems to be fairly stable, and its nice and quick. which for me personally is what i want in a phone
one thing i should mention to people as well running vista to do this is that for every part of flashing the phone, vista may attempt and succeed in "installing device drivers" which in turn means you need to point it to the vista-compatible drivers for it to work (as per the guide) every time to progress to the next part, otherwise a 260 keeps occuring.
Thank you for your wonderful and useful guide!
Thank you!
200% hype abt flashing! Finally!
Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL
genipao said:
Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL
Click to expand...
Click to collapse
If you have a P3600i then according to the info you have above....you downloaded the WRONG Hard SPL.
Go back to the very first post on this thread and read it carefully. There is a link there to the correct Hard SPL from Olipro...and it isn't 130, 120 or Des Crash Proof.
genipao, it was rather surprise you had picked the wrong hard spl and doing some mix and match and it still work?
All experts,
please render help to me for my CHT9110 (P3600i - IPL-Trin100, SPL-3.03.0000, CPU-Samsung 500Mhz, NAND-256MB) that I flashed successfully with hardSPL 3.10 Oplira. this is working and wonderful SPL with the JumpSPL included. Good job done by Oplira!
However when I tried to upgrade P3600i from WM6.0 to WM6.1, I missed the step to tag 401 from 400 when I re-build New_NBH.file for my phone. At a result, I encounterd WM6.1 ROM flashing incomplete at 80% and forced to reset due to hang-up...
Now, my P3600i still can boot up to flash-screen logo, loading radio image (1.56.70.11) and then protocal services (32.89.7020.20H), then it will hand-up forever on flash screen logo.... (until i did the hard reset, then it will re-boot! terrible now!!)
i suspected it was unable to locate the WM6.1 and loading up accordingly....
I tried out many option, to downgrade SPL 1.1, SPL1.2, SPL 2.1 and used SPLxploit to clear the stack in bootloader... all is falied and my bootloader still shown SPL-3.03.0000 and don't allow to re-flash any ROM under bootloader mode now!!
Experts! please assist me,
How can I roll-back the default OS on phone if any? or there is alternative way to recover OS to flash in for recovery? I think firstly we need to crack SPL-3.03.000 in bootloader mode...
Many thanks!
Hi klemtest,
can you guide me on flashing CHT9110?
I couldnt seems to get it flash even after following the instruction.
Appreciate your help
i just followed Ajajaj Quoted, please allow me to share...
Step 1 - Anyway First of all, load the Hard SPL to your phone from : Set
<Klemtest>
Step 1.1 - go and download Hard-SPL-p3600i-V1.1.zip (810.6 KB, 438 views)
Step 1.2 - extract SPL-p3600i-V1.1.zip file onto your local drive
Step 1.3 - connect P3600i via USB, ensure you are under ACTIVESYNC mode in WindowXP (if you use Windows Vista, the you need Vista driver for detecting HTC phone at USB)
Step 1.4 - execute the ROMupdateutility from SPL-p3600i-v1.1 folder, ensure there is RUU_signed.nbh file available, otherwise the utility will prompt u for read file error.
Step 1.5 - once it executed, follows the instruction given from ROMupdateutility screen, until you see the progress bar show up, meanwhile u will notice that p3600i phone will prompt you for ROM upgrading message, click "Yes" to accept and proceed. Sequence pop-up message will be asked again in p3600i for using JumpSPL.exe to unlock CID,
Again click "Yes" to accept and proceed. ROMUpdateutility will complete 100% and your p3600i display will be turned to SPL-3.10 Oplira in bootloader mode now (if the ROMupdateUtility indicated there is update error, just ignore it and exit utility screen)
don't switch off your p3600i, let it continue showing SPL-3.10 Oplira in bootloader display.
Dude! you're now ready for step2 to flashing your favor WM6.0 / WM6.1 once you manage the "nbh" file which I didn't done it properly!!
So, I assumed you have downloaded the working ROM and extract them in local folder as stated in Step-2
Step 2 - So, what I did was to download RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite extract into its own folder (Mary seems to work as well)
Due to p3600i is manufactured with 256 NAND, memory address for storing "OS.nb" slightly difference compared to p3600 (CHT9100) with 128 MB RAM.
Hence, ajajaj advice to use ROMBaker.exe to exract "XX_OS.nb" your favor OS ROM (usually named as RUU_signed.nbh) that you downloaded and re-build it using NBHGEN.exe.
All this stuff is available here Custom RUU tools
In this case, 2 screens captured below showing u how to distingish it
(for wrong re-build of OS.nb at 400)
C:> NBHGEN.exe new_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
400,06_OS.nb
(for correct re-build of OS.nb at 401)
C:> NBHGEN.exe correct_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
401,06_OS.nb
you can follow the step below until step9 if you're not familar of using custom RUU tools:
Step 3 - then download the custom ruu updated from here: http://forum.xda-developers.com/showthread.php?t=295113 - also get the rombaker for trinity as found further down in the post.
Step 4 - unzip the custom_ruu stuff, put in the downloaded trinity rombaker to replace extracted rombaker,
Step 4a - Copy ruu_signed.nbh file that is found in folder created in Step 2 to the rombaker/workshop folder created in step 4
Step 5 - then use nbhextract (created in step 4) to extract the ruu_signed.nbh file that is now in the workshop folder
Step 6 - watch the output. (for file names)
Step 7 - Run the rombaker program and load the extracted files into their places (as referred to in step 6), then click generate NBH
It will ask you to save a file. call it new_nbh (or whatever you want) -
Step 8 - open this file (created in step 7) in notepad, and change the number 400 (about 5 lines down) to 401 save and exit
Step 9 - then open a dos/cmd/command.com window (whatever you want to call it), cd to the rombaker/workshop folder and then run the following:
nbhgen new_nbh.txt
NOTE: new_nbh.txt should be the same as the filename created in step 7
copy the generated RUU_signed.nbh file back to the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder.
Your p3600i rom is now ready for flashing
<Klemtest>
Step-10 - after you have managed to get re-build RUU_Signed.nbh file by yourself. you can proceed last stage for completion.
As I mentioned, you continue keep your bootloader screen at SPL-3.10 Oplira just now. launch again RUUupdateutility.exe
Note: At this point, your personal data from the phone will be destroy, please make sure you back-up all data before regret and ensure ActiveSync is disable during execution the flashing.
Screen1 - On the Welcome Screen, click Next to begin the ROM update installation.
Screen2 - On the next screen, follow the listed instructions in the dialog box first. When you are done, click Next to proceed.
Note: Ignore the instructions listed due to you are flashing via bootloader mode, and ActiveSync is disable.
Screen3 - The following message will then be displayed, indicating that the utility is verifying and acquiring information about the device as preparation for the update process. Wait for this verification process to finish.
Screen4 - Below the device information, information about the new ROM update will then be displayed. If you are certain that you want to install the phone with the new ROM update, click Next to proceed.
Screen5 - confirmation message then appears and shows the length of time it will take to copy the necessary files (including radio image) to the device. Click Next to begin the update.
Screen6 - A progress bar will run through the screen during the update process.
Note: In the middle of the update process, the progress bar may stop running. This is normal as the RUU is adjusting itself to complete the update process automatically. (probably will take up 10 minutes)
6. When you see the screen shown CONGRATULATION message! means update is complete. Click Finish to exit the utility. Otherwise, you will have trouble now to troubleshoot per below steps!
GOOD LUCK and happy computing!
Troubleshooting and Error Recovery
MOD EDIT HDuser 02/01/09
This page has gone wiki and can be found here.
For a better understanding it is recommended that you read all 3 parts under "Flashing - Changing your device to a new version or language" on the main wiki page found here
END MOD EDIT
so, yeah, why not do one for this device too
[size=+3]UPDATE: Hard-SPL released![/size]
[size=+2]NOTE: This is NOT a SIM unlocker - it also doesn't unlock Security for other radios. if you need that, GO HERE[/size]
[size=+2]23/04/09 -
UPDATE: New version will work on SPL 1.54 or above ROMS!!!! [/size]
so I of course changed the 1.56 rom wiki accordingly to that. (someone can review it if they want)
many thanks to testers for testing!
[size=+1]Donations are always appreciated to the big link in our signature ("elite project"). Thank you!![/size]
Preparations:
0) this package is for Blackstone devices. for any BLAC***** now (SSPL loader checks this).
1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Instructions:
read this if unsure how to install Hard-SPL...
1) download Hard-SPL package from attachment, use 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip ) if you want to use new 1.5x ROMs. then extract to an empty folder.
NOTE: 1.14 HSPL (the original Unsigned_HardSPL_for_Blackstone_OliNex.zip) is good for only older ROMs, 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip) is good for newer ROMs. 1.56 is not backwards compatible with old ROMs. the incompatible ROM will still boot but screen is going to look funny which is a temporary issue but uncomfortable.
2) you must Have Phone Synced with PC in Windows Mobile!!!
3) run HardSPLWrapper_Blackstone.exe on PC, make sure it's launched from a local drive (not through network drive, etc.). if you are on vista, launching as Administrator is recommended,
4) follow steps in the RUU, check device for prompts after PC shows loading bar, press Yes on phone if asked. please answer with Yes as fast as you can!
5) some notes: when RUU says it will hard reset, do not worry, it is not going to do that. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
6) device should go to a tricolour screen now that says 1.07.OliNex, the SSPL version, which is temporary.
7) in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device.
8) SPL flashes, device automatically reboots, job done.
9) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.14.OliNex or for new version 1.56.OliNex, which is the Hard-SPL version.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, fully power the device off by long press of power key, then power on while holding the "volume down" key on the left side of the device. keep holding the volume down key until you see tricolour screen which is the bootloader mode, then release it.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is sayingn 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
*important*: make sure that the USB cable is plugged in and device is synced to Windows Mobile even if doing manual SSPL method.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted in this post as well. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps at the end of this post about how to reflash stock SPL.
NOTE 4: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team (using OliNex custom cert) will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or blackstone customRUU if you need to flash cooked ROM.
NOTE 5: for developers asking: Hard-SPL is not based on MFG SPL, as that SPL causes the screen not to turn on after a resume. (maybe solved one day ). so currently, MFG SPL can strictly be used for development and hacking.
Troubleshooting:
- read the instructions above.
- read the instructions above.
- read the instructions above.
nothing happens on the device, does not enter tricolour screen mode anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is showing 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
general usb connection error problems if you get connection error in RUU after the device goes to 1.07.Olinex screen, then
- try a different USB port
- try different USB cable
- do not touch USB cable during the process especially if it is already a bit dodgy
- also do not use USB hub
- you can also try rebooting your PC
- and you can try using another PC.
- also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time and perhaps if you are on vista), then if RUU times out, but HD still says "USB" on the tricolour screen, just leave it there and re-run the RUU when driver installation finishes.
- finally, you can try disabling antivirus or firewall programs on the PC.
HD specific USB or connection errors:
- as already said, in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device. if not (happens very rarely), wait for RUU to time out (or wait 5 minutes). then remove back cover, reset, it will boot OS again, then you can retry unlocking process from step 1.
- alternatively, launch SSPL-Manual.exe from attachment, run it, wait until 1.07.OliNex tricolour screen says "USB" on it, then run the HardSPLWrapper_Blackstone.exe on the PC.
other issues if SSPL-Manual.exe or Enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download your choice of a stock spl package from this post. (currently 1.13, 1.14, 1.15, 1.54)
2. also download the original hardspl from the attachments in this post.
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing.
4. the SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
+6. to verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000 or any other version ending in .0000, but not ending in OliNex!
that's it.
+7. no worries: if your device is stuck in bootloader mode with Hard-SPL and you need warranty service, you can still flash stock SPL.
[EDIT 17-12]
Congrats on releasing this HSPL.
Now the cooking and flashing can begin.
[/edit]
the-equinoxe said:
[SIZE=+2]MOD BREAK[/SIZE][SIZE=+2]
[/SIZE]
As you all may have noticed the thread has been cleaned up.
From now on: keep it clean, stop begging, no whining.
Yes the HSPL will be released, yes it will be free.
[SIZE=+2]Warning: those who leak the testversion will be banned, no exeptions![/SIZE]
Click to expand...
Click to collapse
Nicely put. I see no reason to beg but then again I don't have the phone... yet. I know you must hate that begging crap more than anyone. I was right there with you when you developed the Wizard HardSPL remember?
Anyways keep up the great work OliNex! I can't wait until I have this phone!
dharvey4651 said:
Nicely put. I see no reason to beg but then again I don't have the phone... yet. I know you must hate that begging crap more than anyone. I was right there with you when you developed the Wizard HardSPL remember?
Anyways keep up the great work OliNex! I can't wait until I have this phone!
Click to expand...
Click to collapse
Don't have this phone either, but like you (and most seniors) I do respect the efforts of Olipro and Cmonex (and alike).
They have contributed a lot for our community.
BTW. The honour for the Wizard HSPL goes to Olipro (as always), it was his patching that made the thing work (who's else )
Neh, i'll wait for the public release. I've seen enough horrible failures with HTC devices already when alpha testing
Good job cmonex and Olipro!
have HTC Blackstone SPA firmware to test... waiting for HSPL !
Olipro and Cmonex: the best!
Thanks to all mods
Congrats to all moderators who are doing fantastic jobs, dont have the phone yet but thanks guys, U all rocks
Yeah finally!!
Let the tests go fine and the flashes begin!
Great job man, many thanks!
Cheers.
Waiting patiently for the public release as well. Great job guys, once this gets wrapped up a world of rom cooking will open for the already great HD.
Thanks, please do let us know if we can be of any help!
Guys
Now it is time for you to do some work while you wait.
The good news is that I have enough details to write the wiki page.
The bad news is that I am going to bed.
The worst news is that I have requested that the application not be realesed untill the site is prepered for that.
So you all have a few choices, sit and wait, do nothing and complain.
or
Help us help you.
This is what I need
----------------- 1 -----------------------
one the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
I need somebody to
1) opne the page, add there name in it under ??? on the top line
2) Save the page so that nobody mess with you
3) Check for spelling
4) Check it is readable and understandable
5) Check the content that it is nobb proof.
6) Correct what needs to be corrected.
7) Remove the first commnet
8) Post in this thread that it has been done (so that I know about it)
------------------ 2 ---------------------
On the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_BLackstone_Flash2
I need sombody to extract that shp.exe and follow the outline that I have placed.
Look at how I formated the first page when it came to the files.
I will pick it up some other time.
I also am lost for words on the HSPL issue, need sobody toexplain it.
------------------ 3 ------------------------
We need to update the roms as people will want them
here is what I wrote on that subject
http://forum.xda-developers.com/showpost.php?p=3037840&postcount=4
the WIKI page that needs updating is
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
Also one needs to check the forum for theads as a few other roms have poped up.
--------
So guys, help us to help you and let some of us with day jobs go to bed.
Thanks
And guys
Please lets use the thread to check what has been done as I don't want to read through 18 pages of "I am waiting" to read about what has not been done.
Like I said, help us help you.
HDUser said:
Guys
Now it is time for you to do some work while you wait.
The good news is that I have enough details to write the wiki page.
The bad news is that I am going to bed.
The worst news is that I have requested that the application not be realesed untill the site is prepered for that.
So you all have a few choices, sit and wait, do nothing and complain.
or
Help us help you.
This is what I need
----------------- 1 -----------------------
one the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
I need somebody to
1) opne the page, add there name in it under ??? on the top line
2) Save the page so that nobody mess with you
3) Check for spelling
4) Check it is readable and understandable
5) Check the content that it is nobb proof.
6) Correct what needs to be corrected.
7) Remove the first commnet
8) Post in this thread that it has been done (so that I know about it)
------------------ 2 ---------------------
On the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_BLackstone_Flash2
I need sombody to extract that shp.exe and follow the outline that I have placed.
Look at how I formated the first page when it came to the files.
I will pick it up some other time.
I also am lost for words on the HSPL issue, need sobody toexplain it.
------------------ 3 ------------------------
We need to update the roms as people will want them
here is what I wrote on that subject
http://forum.xda-developers.com/showpost.php?p=3037840&postcount=4
the WIKI page that needs updating is
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
Also one needs to check the forum for theads as a few other roms have poped up.
--------
So guys, help us to help you and let some of us with day jobs go to bed.
Thanks
Click to expand...
Click to collapse
sure thing, I have a little spare time right now so I will contribute with you guys, just step one so far.....
I think I did step one, please feel free to correct or improve anything, glad to be of any help, cheers.
the-equinoxe said:
[size=+2]MOD BREAK
[/size]
As you all may have noticed the thread has been cleaned up.
From now on: keep it clean, stop begging, no whining.
Yes the HSPL will be released, yes it will be free.
[size=+2]Warning: those who leak the testversion will be banned, no exeptions![/size]
Click to expand...
Click to collapse
I am sorry, but I still have to say I have got the so called HSPL in some forums. I downloaded it and have it tested. It worked. Someone said it is SSPL made by Cmonex not the HSPL.
I am not sure if it was the leaked test version. If you need it let me know.
Guys, Great Job. Thanks a lot.
skywalkeret said:
I am sorry, but I still have to say I have got the so called HSPL in some forums. I downloaded it and have it tested. It worked. Someone said it is SSPL made by Cmonex not the HSPL.
I am not sure if it was the leaked test version. If you need it let me know.
Guys, Great Job. Thanks a lot.
Click to expand...
Click to collapse
Skywalkeret, what u have is leakage of Cmonex's testversion and so-called HSPL by someone, which makes you several steps to the success. what i know from Cmonex SSPL is not secure at this stage. And he/she does HOPE everyone can pay patience for the final HSPL release. THE PRE-LEAKAGE of SSPL WOULD MAKE HTC to improve their future "firewall" against HSPL, and I don't believe that EVERY EACH HTC OWNER or FANS would like to hear this sort of stuff?!
It is A REAL SHAME for those guys lost their promise to Cmonex and just make their own threads HOT, even DO NOT MENTION A WORD ABOUT THE GENERATOR OF THIS SSPL.
raphael_ding said:
Skywalkeret, what u have is leakage of Cmonex's testversion and so-called HSPL by someone, which makes you several steps to the success. what i know from Cmonex SSPL is not secure at this stage. And he/she does HOPE everyone can pay patience for the final HSPL release. THE PRE-LEAKAGE of SSPL WOULD MAKE HTC to improve their future "firewall" against HSPL. It is A REAL SHAME for those guys lost their promise to Cmonex and just make their own threads HOT, even DO NOT MENTION A WORD ABOUT THE GENERATOR OF THIS SSPL.
Click to expand...
Click to collapse
Seems you are the right one i have talked to in some other forums. I sugguest we may do something to wake those guys up and warning them.
If there is anything I can help, please let me know.
Re: Raphael_ding
hey, ding. i got you. I must say, world is just like a box of chocolate. you dont know what you gona get lol. they just did it.
me? yes, im just waiting for the original olinex's NON-BETA version lol
again. thanks olinex's hard work. you let me flash a lot of ROM on my S1, TOUCH PRO, ....and my future HD.
skywalkeret said:
Seems you are the right one i have talked to in some other forums. I sugguest we may do something to wake those guys up and warning them.
If there is anything I can help, please let me know.
Click to expand...
Click to collapse
THX, Skywalkeret, what we can do is to post sth. and let those guys know about what they are doing. And better ask forum moderators to eliminate those leakege threads ASAP.
Cheers
After looking through the varying questions concerning the same topic and, subsequently, not seeing the right answers - within the right timeframe (e.g. within the past month or so), I decided that a new thread was needed. So here's it is:
A branded G1 (mine, T-mobile, Germany) is what I want to downgrade so that it may be rooted and upgraded with a custom ROM. The problem, I am finding, is not that the instructions aren't correct. Rather, it's that a piece of the instruction set doesn't exist. Namely, the revskills.de website. I mention this because I have tried, repeatedly, to boot with the DREAIMG.nbh in order to downgrade and have consisitently (after numerous downloads from different sites) received the same error - 00028002 (or something like that) while trying to load it. I eventually learned that some phones needed a "goldcard" so I set about trying to do that. Got the CID, reversed it, etc. but the part about going to psas.revskills.de is the killer. The site is down and apparently, no other method of changing the carrier ID exists (or, if it does, the method is too ugly to mention, let alone comprehensible by someone like me, a not-so-good-programmer). Worse yet, all the instructions involving the generation of a goldcard also involve this website and consequently, because of the aforementioned down-status of the site, renders all instructions moot (Grade: D for relying on unreliable sources). So, back to the question: does a method exist outside of what I have mentioned? Where can I find it? Does it have a cost attached to it?
If you've read this far it means that full words and sentences don't confuse you (in light of so-called "l337sp33k") and I applaud you. I will applaud you even more when a well thought out and not-so-glib answer unriddled with blog cliches and platitudes can be found as a reply to this post...
Seriously, if you don't know an answer, a link to check out or someone I can refer to, don't waste your time (or mine) with a the standard "you need to read this and that rules before asking a question" reply. I have trolled through this forum and a few others for the past 2 days looking for the answers to the question of downgrading and finding not the right answers that are specific to this problem (yes, I've read thropugh cyanogenmod wiki, read through the wiki here for dream/g1 phones, gsm programmer's sites, android dedicated sites, etc...ALL of them point to revskills for the goldcard gen (except for one which allows dowloading a perl prog to compile yourself to make the goldcard - I'm not so good with perl yet)
If you need to check the website go here:
psas.revskills.de/?q=goldcard
it's not working for me, whether through proxies in the US, netherlands, britain, frnace, or germany. My only conclusion is that it has been shut down.
Thanks for you attention and I really appreciate some advice from one of you that may be able to shed more light on this.
Incidentally:
SD Card: Hama 2GB Micro SD(formatted fat32)
Droid/HTC G1 phone has been factory reset to:
Firmware: 1.6
Kernel: 2.6.29-00479-g3c7df37 [email protected] #19
Baseband ver.: 62.50S.20.17U_2.22.19.26I
Build No.: DRC 92
are you going on that non exiatent site to download the qmat thing? maybe try looking for it as a torrent file... use bittorrent or something and see if it's out there... i wish i knew how to help more, but i never needed to do anything like that...
stupid question but did you try both dreaimg files? rc29 and rc7?
both img files
Yes, I tried both. The US version gave me the same response as the European one. Tried qmat 5.0.2 and got nowhere with it (i ran out of time before I could figure out everything it could do - apart from simply reversing the cid). The only way to create a gold card seems to be through revskills...kind of a raw deal for the rest of us, if you ask me.
yeahh haha this sucks im not sure what you can do... hopefully someone sees this who can help you. sorry
I am currently trying out the alternate root method from your guide. Something's working...the build version is now CRB43 and I have cupcake (1.5) installed - I think. I shoudl be able to go through the guide in order now, right?
yeah if you have 1.5 than all you need is a custom recovery installed and you have root access... i prefer amonra recovery.. than you can flash radio and spl and go even further by flashing the newer 2825 radio and 0013d hboot
I just have to update my phone account with a data plan (forgot I didnt have one and cant sign in to google without it). Fortunately, it's cheap and takes only a day to update.
OK, so i worked the alt recovery method, but I can't sign in to google. (I used the AMON_RA recovery img.) I can't do anything now. The phone is (for all intents and purposes, bricked. I then tried to do the work around to get the wireless turned on at the touch me screen. It doesn't work. Still no root access. trying to go back to stock rom, no go. Still get the "Not Allow" 00028002 error. Haven't seen the fast boot screen lately. I try the back arrow from the boot loader screen...nothing. Even went so far as to try the HTC site boot unlocker method. HTC Sync installed, android sdk installed, etc. got the drivers in win7 x64 to acknowledge the phone being plugged in...it even recognozed (once) as the HTC Dream/G1, after that never again. This is nuts! It's funny as well as highly annoying. I'm running out of ideas and could use some suggestions...
Thanks
incidentally, the link to "DREAIMG.nbh" in the unrooting section connects to a download of the update.zip file. So, the link is misplaced or something...
good news, the gold card gen sit is back up, however, I can't connect to the phone with adb...I have tried the workaround but I guess the image on this thing is still not rooted. I'm out of ideas what to do, I cannot sign in to google (registration work around) and I can't connect with adb to all the other work to change things. This phone is hosed (and I will absolutely not go to T-mobile (in germany) they're even worse here than in the US...
Here is the link that I found for dreaming.nbh file.
http://www.megaupload.com/?d=NAAS5VBS
See if that works.
So, I am resigning myself to never getting this fixed. I have a rom I cannot access because the data plan on my sim card is for Maxxim, while the rom sets everything up as T-Mobile. Maxxim support will not give out the APN info and, to top it off, the wireless work around does not work because the cupcake dreaimg.nbh and amon_ra recovery image still do not allow root access. I'm lost, got a "working brick" phone, and I'll be damned if I go crawling back to t-mobile whether here in Europe or the US! Thanks for the help anyway...
yeah sorry bout that will fix the link, but its the same one you use to 'downgrade' on the Root method.. just brings you to 1.0, then flash the update.zip to 1.5 or 1.6...
so you cant flash the DREAIMG.nbh file? and you cant do anything via recovery?
but your device works if you had a data plan.. lol wow all i can think of is trying to flash the orange.nbh or get the DREAIMG.nbh to work..
Yeah, tried the orange.nbh as well and I get the same error for every nbh I try:
"00028002 Not Allow". It's really weird that all the nbh do not work...it's almost deliberate. The only root that worked was the alternate root, but wouldn't that have let me flash other roms? Interesting that it didn't.
Good that this G1 is a spare, but I would still like to get it working. I've found a use for it at work but it needs to be rooted. Will post back shortly with results from the DREAIMG.nbh and orange.nbh (if need be).
Incidentally:
Bootloader screen:
DREA110 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
SEP 2 2008
Does this give you any ideas? I can get to the recovery console but it does not necessarily mean I have root (as far as I've seen to this point). I mean, if I were able to register the phone without a data plan (using the wireless connection) I think I would be ok. I did have a point when I was able to connect to the phone via adb (but the phone was registered).
I know I don't have root because I am unable to do the <enter>reboot<enter> thing in the reg bypass method. How did that happen? -I've got no idea...
Another thought, Is there another way to install drivers on my windows machine so that the phone is recognised by adb (even though it's not regitered and I have no way of turning on debugging)? Is there a way to alter the build manifest so that USB debugging is on by default thereby allowing me to connect via windows?
Its painful to read threads like this..
Do you still have your sdcards CID from the OP?
If so using the sdcard you have the CID to make the goldcard on your computer, tben takethe orange nbh rename it to DREAIMG.nbh and place it onthe root of the sdcard.
Then flash the orage nbh and use fastboot to install the 2708+ radio/spl/custom recovery (ra or clockwork)
If you dont have the CID find a device (likely a friends phone) that can read the CID and pick up from there. (notice no adb, and only fastboot after flashing an nbh with an engenering spl)
(I didn'tsay it earlier as the goldcard site was down...)
How to I go about reading the CID on another phone? I am not too familiar with the process. I have a nokia X2. Will that work through a bluetooth connection? (it's my wife's phone and I don't want to try anything with that one until I am absolutely sure.
If you could point me at something I could read on how to do this, I would be exteremely grateful...
Thanks
the site http://psas.revskills.de/?q=goldcard is odwn for me, so I can´t create my gold card.
Any other way to access the site?
I'm following the CM guide for my inspore 4g, but when I searched this forum, this thread came up
So here's my final result:
* Followed steps in the guide for alt root method (nothing else worked but that) - gained root.
* Restarted in order to follow thorugh with the radio upgrade
* No root
* Reflash the ROM
* still no root
* Cannot connect adb to device
* Windows sees it only as USB (even after uninstalling and pointing the hardware to the Android SDK USB Drivers
So I've come into an infinite loop:
* Can't gain root without a goldcard (or some ability to take the NBH apart and modify the kernel - DEFINITELY not my strongest skill...
* Can't get a goldcard without being able to read the CID
* Can't read the CID without connecting with adb
* Can't connect with adb without USB Debugging on
* Can't turn on usb debugging without a) registering phone (no data plan) or b) having root access to type in the commands at reg screen (with SIM Card in) or initial screen (without SIM card)
I've tried every ROM I could find, used the Android Kitchen tool (to modify the ROMs I've found, adding root access), I've read every guide I could get my hands on, as well as trying to extract the nb files from the NBH (in hopes of spotting what I needed to change in order to enable the phone to come on with wireless ON). I have been unsucessful. Is the phone now a paperweight?
I appreciate and respect any suggestions (I've already thought of buying a new phone - so that suggestion is out ;-) ).
Thanks
Hello to all ..
My problem is that here ..
In a few words I wanted to install in my HTC 7392 with node HD7 SPL Bootloader 4.5 and unlocked the rom modified mango ..
but before you do anything, I had to install HSPL / RSPL in my HTC HD7 ..
I downloaded the "DFT_XSPL_WP7FG1"
I followed a guide ..
MAH reached the point of selecting the SPL, the list of the program reached only up to 3.4 ..
so my HD7 being with SPL 4.5 you could not do so I tried to install the 3.4 "I did na bull****" ..
so going forward I get an error in the program where it was impossible to go on ..
So I unplugged the HD7 and I tried to do it again ..
MAH OSPL when I open "volume down and power button" not come out as written, but all I get only one written with the words "SS-BC PD29100 (4k) ..
What has happened? knows someone explain why?
I already tried to do the backup but nothing = (..
What does the spl screen say when your in bootloader?
Sounds like you have the 4.xx version.. If that's the case you need to flash an official nodo rom first. The hspl doesn't support spl's 4.xx yet.
Sent from my HD7 T9292 using XDA Windows Phone 7 App
crazysax1 said:
MAH OSPL when I open "volume down and power button" not come out as written, but all I get only one written with the words "SS-BC PD29100 (4k) ..
What has happened? knows someone explain why?
Click to expand...
Click to collapse
if your Bootloader does indeed only have one thing written on it...
then you have half-bricked your device.
according to cotulla, here, it is impossible to recover such devices.
though...
according to dj.95, here, you can recover your device using the goldcard method.
good luck.
sh4d0w86.
But you have to worry about?
What are the consequences?
Is serious?
crazysax1 said:
Hello to all ..
My problem is that here ..
so my HD7 being with SPL 4.5 you could not do so I tried to install the 3.4 "I did na bull****" ..
(..
Click to expand...
Click to collapse
you didnt read the instructions that are in giant bold letters all over those threads...you had spl 4.5 and tried to install the hspl. youve unfortunately half bricked your phone and currently it looks like it may NOT be fixable at all. try the gold card method listed above, i havent done it or read the thread but briefly but it looks like it may be a work around. unfortunately tho youre phone is BBQ'd.
sh4d0w86 said:
if your Bootloader does indeed only have one thing written on it...
then you have half-bricked your device.
according to cotulla, here, it is impossible to recover such devices.
though...
according to dj.95, here, you can recover your device using the goldcard method.
good luck.
sh4d0w86.
Click to expand...
Click to collapse
i don't thing with the goldcard method we recover our device! my device work ok, but don't go to boot usb host mode because bootloader is half bricked! then no gold card works...
(or maybe it's me, that does not access the USB host mode?) ( camera + vol- + power?)
alessio81pa said:
i don't thing with the goldcard method we recover our device! my device work ok, but don't go to boot usb host mode because bootloader is half bricked! then no gold card works...
(or maybe it's me, that does not access the USB host mode?) ( camera + vol- + power?)
Click to expand...
Click to collapse
i honestly have no idea how goldcard method works.
haven't had any experience with it.
you may message the individual who's post i linked to and ask them.
sorry i can't be of more help.
sh4d0w86.
Half bricked possibilities
Hi friends. Do you really know anybody, if goldcard, Zune HTC update, JTAG or something another can solve hb problem? I am also in the "warnings late reading ignorants" club from last weak. But, I got a reply from a single "Half Bricked repairing" service near of Central Europe (GSM-TechNix.de): "Dear Sir, HTC 7 Pro is no Supported by JTAG! Sorry we can not help for this Phone." I have a little idea - to replace only internal information about bootloader version (I have no info on tricolore, but 3.2.2250.0 in Settings/about), connect to Zune and replace HTC update, if it is depend by this number. Is it possible? I have unlocked phone with pre-nodo (older backup has deleted by Zune), then HTC debug application or some homebrew features for values writing can work.
(From another forums:
_________
"Just updated my half bricked phone(bootloader problem) via Zune with HTC update for Windows Phone and the bootloader hasn't been fixed, so our only chance is with XTC Clip or DFT to come with a solution
Actually I got the same problem using an HTC Trophy A1 Version."
________
"For now your/our phone(s) are half-bricked. But as soon as a new update is available - including a new Radio Version everything will work fine again. Had the same problem when debranding my phone. After updating to 7932 via Zune everything was fine again - until I applied the leaked Mango Update.
So again - be patient "
________
"If your device is halfbricked you can use the goldcard method to recover your phone. If it's full bricked you need to make a jTag."
________
"Goldcard cannot repair halbricked WP7 phone."
________
). Thanks for replies, sorry for my english. M.
Hi guys!
I have an HTC HD7 phone, which was given to me (actually to my mobile phone magazine) about two years ago for writing review. It is a pre-production modell with test OS. It worked for some time but last year broke down, and I was not able to recover it.
Now I decided to give it one more try.
This time I tried upgrade through PC (USB connection is ok, but error code 269 at the end of the process - several ROM's tried) and goldcard method as well - but with no success.
This is written in bootloader:
**
Security Unlocked
SPL-0.93.2250.0(105296)
MicroP(LED) 0x06
TOUCH A1(v10)
nothing in green area (though there is card in the phone)
Serial in white area
**
USB connection works, and the phone can be put into USB host mode - so I think it must be some way to bring it back to life.
When I tried goldcard method the following tools were used:
2GD Samsung microSD
Kingston USB 2.0 microSD Flash Memory Card Reader FCR-MRB
Home made Y-cable
I followed the steps described in several threads here in XDA forum, but with no succes. The best result was that after connecting the phone in USB host mode "loading..." appeared on the screen, but some second later an error message came:
No image file!
(serial - written at the bottom)
What can be the problem? The pre-production ROM? Or should I use different microsSD card, card reader, or not home made Y-cable?
If anyone has an idea how to recover my phone please let me know.
My friend, no one from them will help you!! I don't know what exactly XDA is and how this community helps each other...
I registred here 1 week ago, posted 10 questions and asking for help or any guide how to restore/flash PVK key because my SD card is not recognized. I got only one answer
Okey bro. Take a look there:
http://www.mediafire.com/?dwkt6go38ibi2
And if you have EU phone then try to download these images:
1) / WP7 HTC Schubert HD7 /Goldcard DiagImg Roms / EU_1.16.401.01_R5.51.09.06a_22.30.50.09
or
2) / WP7 HTC Schubert HD7 /Goldcard DiagImg Roms / EU_1.69.401.01_R5.54.09.21_22.33b.50.10
Extract to SD and flash it from Hostmode.
Best regards
To install custom roms you need to install darkforce teams rspl/hspl to install custom roms. To use gold card you need to have the right image file,and it needs to be named specifically. Check for both of those in the htc hd7 development section.
Sent from my HD7 T9292 using XDA Windows Phone 7 App
silek65 said:
My friend, no one from them will help you!! I don't know what exactly XDA is and how this community helps each other...
I registred here 1 week ago, posted 10 questions and asking for help or any guide how to restore/flash PVK key because my SD card is not recognized. I got only one answer
Okey bro. Take a look there:
http://www.mediafire.com/?dwkt6go38ibi2
And if you have EU phone then try to download these images:
1) / WP7 HTC Schubert HD7 /Goldcard DiagImg Roms / EU_1.16.401.01_R5.51.09.06a_22.30.50.09
or
2) / WP7 HTC Schubert HD7 /Goldcard DiagImg Roms / EU_1.69.401.01_R5.54.09.21_22.33b.50.10
Extract to SD and flash it from Hostmode.
Best regards
Click to expand...
Click to collapse
Still getting the message "No Image File!". Any ideas?
crazy cat said:
Still getting the message "No Image File!". Any ideas?
Click to expand...
Click to collapse
Hi,
What is your devices info... Go to, Settings - About - More and post back devices Firmware Revision Number and Bootloader Version.
Are you trying to use the goldcard method to downgrade the devices SPL?
xdrc45 said:
Hi,
What is your devices info... Go to, Settings - About - More and post back devices Firmware Revision Number and Bootloader Version.
Are you trying to use the goldcard method to downgrade the devices SPL?
Click to expand...
Click to collapse
Hi,
It´s a prototype device named "HTC HD3" with this info:
HTC Schubert
OS Version: 6531.WM7_BldLab(mojobld).20100803-1911
FW: 0.93.401.1
HW: 0002
SPL: 0.93.2250.0(105291)
SOC: 2.2.5.0
Tried to upgrade SPL by goldcard, cause i´m getting an 269 error if i try flash by RUU.