i tried to upgrade From GB to JB via ODIN
JB I8160XXMC8 from samsung-updates.com
doesn't contain pit file
the phone bricked it restarts before bootscreen animation
any help plz ?
Master-ZizO said:
i tried to upgrade From GB to JB via ODIN
JB I8160XXMC8 from samsung-updates.com
doesn't contain pit file
the phone bricked it restarts before bootscreen animation
any help plz ?
Click to expand...
Click to collapse
install leaked mb2 and then mc8..
mkel91 said:
install leaked mb2 and then mc8..
Click to expand...
Click to collapse
MB2 or MB4 is it ok ? Or Just MB2 ?
hy,
for installing the new jelly firmware for i8160 please follow next step:
1. flash first firmware jelly bean I8160_OXAMB2, like in this link:
http://www.youtube.com/watch?v=2LZqCD3-Ytk
2. then flash the last firmware jelly bean I8160XXMC8
Thank u all...
problem solved after flashing MB4 or MB2 then Going to MC8
baseband unknow
flashing stopped on "nand write" while flash mb2 or mb4.
if flashing mc8 directly from gb stock rom region hongkong success..
but baseband unknow.
Try flash back to gb stock different region still baseband unknow..
Now i flash gb stock region hk, and back normal again..
How should i do?thank u.
For a moment I thought I wasn't browsing on the ace forums....! Had to check back... Please post on the right forums peeps.
Sent from my GT-Xperia S using xda premium
Related
Hi,
I have my Galaxy S advanced. (GT-I9070)
A few weeks ago i flashed Android 4.1.2 using odin. JB
I got the software i flashed from samsung-updates.com
But my phone gets laggy and now want Gingerbread back.
When i trie to flash a 2.3.6 software back also from samsung-updates.com my phone get stuck at the boot logo
I have done a factory reset.
Now i have a kernel with a recovery build in (TWRP).
So my question is is it possible to flash Advanced-stock rom back as a zip file? Link here
if not possible how can i get my 2.3.6 software back ?
thanks!
Одг: [Q] Flash GB on JB
roboneter said:
Hi,
I have my Galaxy S advanced. (GT-I9070)
A few weeks ago i flashed Android 4.1.2 using odin. JB
I got the software i flashed from samsung-updates.com
But my phone gets laggy and now want Gingerbread back.
When i trie to flash a 2.3.6 software back also from samsung-updates.com my phone get stuck at the boot logo
I have done a factory reset.
Now i have a kernel with a recovery build in (TWRP).
So my question is is it possible to flash Advanced-stock rom back as a zip file? Link here
if not possible how can i get my 2.3.6 software back ?
thanks!
Click to expand...
Click to collapse
You have guide how to downgrade. And it is sticky. http://forum.xda-developers.com/showthread.php?t=2100642
It is easyer to make new thread, than to look for it.
Sent from Galaxy S Advance
Why dont you post in the existing thread?
Sent from my GT-I9070 using xda premium
shut_down said:
You have guide how to downgrade. And it is sticky. http://forum.xda-developers.com/showthread.php?t=2100642
It is easyer to make new thread, than to look for it.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thanks a lot ! i wil try it tomorrow!
hello guys .... i wanna know how can upgrade rom froyo 2.2.1 to 2.3 but i wanna arabic rom coz i live in egypt
please give me link rom and how can flash it .... i know this wrong section but i ask in Q&A and no one help me so sorry but i need help
Go to samfirmware.com and find 2.3 ROM for Egypt. For instructions please use Google!
Sent from my GT-S5570 using xda premium
thank you i download middle east .. flash by odin ??
and my rom 2.2.1 i wanna flash GB 2.3.6
direct flash 2.3.6 or must flash 2.3.4 and upgrade then to 2.3.6 ?
dodora3d said:
thank you i download middle east .. flash by odin ??
and my rom 2.2.1 i wanna flash GB 2.3.6
direct flash 2.3.6 or must flash 2.3.4 and upgrade then to 2.3.6 ?
Click to expand...
Click to collapse
You can directly flash it, but after flashing you have to wipe data from stock recovery. And yes, you have to user Odin. Be careful to use the version which is in the tutorial.
iSwipe
oky thank you ... i will flash 2.3.6 directly .... thanks again
First of all i'm new to this forum...i ordered Samsung Galaxy S Advance in flipkart..and it will be arriving by today...I'm making sure that i do not HARDBRICK it within a few hours after buying.. so please help me..any help would be appreciated....
All i want to know is that
#1 The phone will be arriving with a stock indian gingerbread firmware..Can i flash any country's jellybean firmware onto this stock firmware via Odin 3.07..??
#2 If 'YES' what firmware would be most useful??...( what about the official indian JB FW DDULP8??..because i have already downloaded it )
#3 Does 8GB and 16GB FW differ??
#4 If i flash the indian JB FW .. will i be able to install any JB ROM ( like JetMod,JellyMod ) in that firmware or are ROMs firmware dependent??
#5 The same goes for Kernels...Are they FW dependent or i can just install any JB kernel ( like cocore 6.0 and thunderzap , etc ) on any JB FW..??
This is the Final noob question..
#6 I know that the Binary count reset method by Shaan work on any JB FW...but specifically will it work for the indian official JB FW DDULP8..??
Manikandan Pradeep said:
First of all i'm new to this forum...i ordered Samsung Galaxy S Advance in flipkart..and it will be arriving by today...I'm making sure that i do not HARDBRICK it within a few hours after buying.. so please help me..any help would be appreciated....
All i want to know is that
#1 The phone will be arriving with a stock indian gingerbread firmware..Can i flash any country's jellybean firmware onto this stock firmware via Odin 3.07..??
#2 If 'YES' what firmware would be most useful??...( what about the official indian JB FW DDULP8??..because i have already downloaded it )
#3 Does 8GB and 16GB FW differ??
#4 If i flash the indian JB FW .. will i be able to install any JB ROM ( like JetMod,JellyMod ) in that firmware or are ROMs firmware dependent??
#5 The same goes for Kernels...Are they FW dependent or i can just install any JB kernel ( like cocore 6.0 and thunderzap , etc ) on any JB FW..??
This is the Final noob question..
#6 I know that the Binary count reset method by Shaan work on any JB FW...but specifically will it work for the indian official JB FW DDULP8..??
Click to expand...
Click to collapse
Yes, you can flash INU fw using odin and it doesnt matter ur phone is 8/16gb.
Roms are dependent but they work on different fw's so, dont worry. Just make a nandroid backup from recovery and flash, if by chance u get a bootloop (stuck at logo) you can restore. :thumbup: and kernels are not dependent. Cocore6 works great with Indian fw. And binary wont increase on flashing with cwm/twrp.
szzlgupta said:
Yes, you can flash INU fw using odin and it doesnt matter ur phone is 8/16gb.
Roms are dependent but they work on different fw's so, dont worry. Just make a nandroid backup from recovery and flash, if by chance u get a bootloop (stuck at logo) you can restore. :thumbup: and kernels are not dependent. Cocore6 works great with Indian fw. And binary wont increase on flashing with cwm/twrp.
Click to expand...
Click to collapse
dd/zip flashing via recovery/universal kernel app...which is the safest method for flashing kernels??..
another question: what are the possibilities of getting a HARDBRICK??? and is there any WORKAROUNDS for hardbrick??...thnx in advance :good:
Manikandan Pradeep said:
dd/zip flashing via recovery/universal kernel app...which is the safest method for flashing kernels??..
another question: what are the possibilities of getting a HARDBRICK??? and is there any WORKAROUNDS for hardbrick??...thnx in advance :good:
Click to expand...
Click to collapse
Easiest and safest way is flashing through recovery..
There are very less chances of hard brick..Just follow the steps and you should be good.
There are no workarounds for a hard brick.. except jtag repair.. which is usually done in the service centre..
Sent from my GT-I9070 using xda premium
rushilkr said:
Easiest and safest way is flashing through recovery..
There are very less chances of hard brick..Just follow the steps and you should be good.
There are no workarounds for a hard brick.. except jtag repair.. which is usually done in the service centre..
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I would say ukf is safer for first time flashing. Easy and safe.
szzlgupta said:
I would say ukf is safer for first time flashing. Easy and safe.
Click to expand...
Click to collapse
To each his own
Sent from my GT-I9070 using xda premium
Manikandan Pradeep said:
First of all i'm new to this forum...i ordered Samsung Galaxy S Advance in flipkart..and it will be arriving by today...I'm making sure that i do not HARDBRICK it within a few hours after buying.. so please help me..any help would be appreciated....
All i want to know is that
#1 The phone will be arriving with a stock indian gingerbread firmware..Can i flash any country's jellybean firmware onto this stock firmware via Odin 3.07..??
#2 If 'YES' what firmware would be most useful??...( what about the official indian JB FW DDULP8??..because i have already downloaded it )
#3 Does 8GB and 16GB FW differ??
#4 If i flash the indian JB FW .. will i be able to install any JB ROM ( like JetMod,JellyMod ) in that firmware or are ROMs firmware dependent??
#5 The same goes for Kernels...Are they FW dependent or i can just install any JB kernel ( like cocore 6.0 and thunderzap , etc ) on any JB FW..??
This is the Final noob question..
#6 I know that the Binary count reset method by Shaan work on any JB FW...but specifically will it work for the indian official JB FW DDULP8..??
Click to expand...
Click to collapse
Make sure you know if you have a GT-I9070 or GT-I9070P. You can easily brick your phone putting firmware for on on the other.
try samsung kies update or OTA first.. this way you can experience kies or over the air update..
if its not available, you can do Odin update..
make sure you have atleast 50-80% battery charged..
Hi Guys,
Since I am new, I cannot post on the development groups. I was installing a ROM on my friend's S Advance. Whenever I flash a ROM, I am able to install everything properly but I have lost my mobile signal completely . I cannot make calls or send messages, the SIM works fine on other phones. What could be the problem here?
In Phone Status, it shows :
Network : Unknown
Signal strength : 0 dBm 99asu
Mobile Network Type : Unknown:0
Service Status : Radio Off
I have an Indian version of the phone, Baseband : i9070DDLK2
I tried looking for Radio files to Flash, but cannot seem to find it anywhere on XDA,
Please please help me out. Thank You so much for reading. Please let me know how to make it work.
What ROM did you flash?
szzlgupta said:
What ROM did you flash?
Click to expand...
Click to collapse
Flashed this ROM :
http://forum.xda-developers.com/showthread.php?t=2324100
I tried flashing a few other ROMs too. Same issue with them.
NOOOOO
These roms can be flashed ONLY over JB 4.1.2 firmware! You have GB.
Please first upgrade to JB and then flash this rom!
szzlgupta said:
NOOOOO
These roms can be flashed ONLY over JB 4.1.2 firmware! You have GB.
Please first upgrade to JB and then flash this rom!
Click to expand...
Click to collapse
Whoah! Okay
I tried flashing a stock firmware over ODIN from a link with stock firmware files. Phone went into a bootloop. Could you please forward me to a link with the firmware I should flash? Thanks
Did you make a factory clean? It will boot up!
szzlgupta said:
Did you make a factory clean? It will boot up!
Click to expand...
Click to collapse
Yes. Factory reset in recovery then rebooted in download mode and flashed via Odin
What FW did you flash? 2.3.6 or 4.1.2 ?
szzlgupta said:
What FW did you flash? 2.3.6 or 4.1.2 ?
Click to expand...
Click to collapse
I tried flashing this :
I9070DDULP8_ODDULP8_India_Android_4.1.2 Since the following were the only 2 available for India on the XDA links and the others I found, I thought I'd give it a try :
REGION: INU (India) | PDA: I9070DDLJ1 | CSC: I9070DDLJ1
DOWNLOAD
REGION: INU (India) | PDA: I9070DDLI1 | CSC: I9070DDLD4
DOWNLOAD
Click to expand...
Click to collapse
Then I figured out it won't work for i9070DDLK2 so I'm trying to reflash to stock 2.3.6
If you know where I could find a 4.1.2 link for i9070DDLK2, do let me know. I'd be grateful
No.. ddlk2 is 2.3.6 and ddulp8 is 4.1.2
First u need to flash ddlk2 which is 2.3.6 and then flash ddulp8 which is 4.1.2!
szzlgupta said:
No.. ddlk2 is 2.3.6 and ddulp8 is 4.1.2
First u need to flash ddlk2 which is 2.3.6 and then flash ddulp8 which is 4.1.2!
Click to expand...
Click to collapse
Okay. Thanks for clarifying. All these baseband versions on Samsung have me thoroughly confused.
I am pretty new to Samsung devices when it comes to rooting. Really appreciate you clarifying it.
Actually I had jumped from Firmware 2.3.6 to a custom ROM on 4.2.2 and then tried jumping back to Firmware 4.1.2 and hence the bootloop was occurring. (It's kind of making some sense now )
Thank you so much for clarifying, didn't read it clearly on blogs I guess, my bad. Firmware 2.3.6 is on download. I'll do a clean install of the firmware on ODIN and then try 4.1.2 and then custom ROMs. Thanks
Yes. And don't need to say 'Thanks', just HIT it!
Hello guys, i will explain the story in order, sorry for my bad Grammar.
first i have the official GTI9070 but i forgot the baseband (GB)
then i accept software update that appear in notification bar, my baseband become I9070DXLK2 (GB)
and i see there's CM11 out that can make kit kat running in I9070.
but it requires root to install CMW / TWRP..
so hard to find root zip for DXLK2, and then i found one full ROM rooted then flash it with odin.
my baseband still I9070 (GB) but rooted (binary counter++)
after that i flash TWRP with odin too.
then i try flashing CM11 with TWRP.
it success, but no mobile network.
i search at this forum and someone say "no mobile network happen because flashing from GB (2.3.x) directly to KK (4.4.x)"
he said first update from GB to official samsung JB.
the problem, there's no official samsung JB update for my country/region (DXLK2)
my question, if i flash the official samsung JB update from other region.. let say it italy.. will my baseband change?
if it changed, what's the problem and whats the negative impact? what should i do better?
thx in advance.
PS: my device is Samsung Galaxy S Advance GT-I9070 (Indonesian)
amaDetoir said:
my question, if i flash the official samsung JB update from other region.. let say it italy.. will my baseband change?
if it changed, what's the problem and whats the negative impact? what should i do better?
thx in advance.
Click to expand...
Click to collapse
You don't have any negative impact if you flash any stock JB firmware, only with your warranty if you still have one.
Please, follow this guide from point A (JELLYBEANIZATION): [GUIDE] From stock GB to Custom JB (Noob-friendly)
After you updgraded to JB, ask/read some tutorials linked here: [{INDEX of GUIDES/TUTORIALS}] Galaxy S Advance [GT-I9070].
Be sure when you proceed to do something OR ASK before, NOT AFTER you doing something wrong.
R_a_z_v_a_n said:
You don't have any negative impact if you flash any stock JB firmware, only with your warranty if you still have one.
Please, follow this guide from point A (JELLYBEANIZATION): [GUIDE] From stock GB to Custom JB (Noob-friendly)
After you updgraded to JB, ask/read some tutorials linked here: [{INDEX of GUIDES/TUTORIALS}] Galaxy S Advance [GT-I9070].
Be sure when you proceed to do something OR ASK before, NOT AFTER you doing something wrong.
Click to expand...
Click to collapse
thank you for the response.
i'll tell the result later after i can download it, at my office the download link show 404 Not Found (maybe blocked)
Search JB on www.samsung-updates.com.
Powered by CM11
amaDetoir said:
thank you for the response.
i'll tell the result later after i can download it, at my office the download link show 404 Not Found (maybe blocked)
Click to expand...
Click to collapse
Or maybe removed. Try on samsung-updates.com or sammobile.com
In Canada, have XXLK2 (Africa?). Want JB, use UK version?
I bought my unlocked I9070 almost 2 years ago and am thinking about upgrading to Android 4.1.2 (JB).
On samsung-updates there appear to be lots of JB versions for different regions.
Can I just select the one for Britain (XXLQE)? Is there anything I need to check re: compatibility?
coghlan said:
I bought my unlocked I9070 almost 2 years ago and am thinking about upgrading to Android 4.1.2 (JB).
On samsung-updates there appear to be lots of JB versions for different regions.
Can I just select the one for Britain (XXLQE)? Is there anything I need to check re: compatibility?
Click to expand...
Click to collapse
Yes you can flash any stock firmware for I9070. Be sure you don't flash firmware for I9070P.
Powered by CM11 M11 snapshot
Flashing worked...once I found a .zip file
R_a_z_v_a_n said:
Yes you can flash any stock firmware for I9070. Be sure you don't flash firmware for I9070P.
Powered by CM11 M11 snapshot
Click to expand...
Click to collapse
I had a lot of trouble trying to get the samsung-updates.com download to work (used the free one, which either didn't start most of the time or died during download). Eventually, I took the filename (for Britain) and Googled it, and found a download site that let me download it (required 3 hours).
Armed with the .zip file and ODLIN, it worked like a charm. All my installed apps and data survived, which surprised me. I thought this would be a vanilla install.