Hi,
I have my Galaxy S advanced. (GT-I9070)
A few weeks ago i flashed Android 4.1.2 using odin. JB
I got the software i flashed from samsung-updates.com
But my phone gets laggy and now want Gingerbread back.
When i trie to flash a 2.3.6 software back also from samsung-updates.com my phone get stuck at the boot logo
I have done a factory reset.
Now i have a kernel with a recovery build in (TWRP).
So my question is is it possible to flash Advanced-stock rom back as a zip file? Link here
if not possible how can i get my 2.3.6 software back ?
thanks!
Одг: [Q] Flash GB on JB
roboneter said:
Hi,
I have my Galaxy S advanced. (GT-I9070)
A few weeks ago i flashed Android 4.1.2 using odin. JB
I got the software i flashed from samsung-updates.com
But my phone gets laggy and now want Gingerbread back.
When i trie to flash a 2.3.6 software back also from samsung-updates.com my phone get stuck at the boot logo
I have done a factory reset.
Now i have a kernel with a recovery build in (TWRP).
So my question is is it possible to flash Advanced-stock rom back as a zip file? Link here
if not possible how can i get my 2.3.6 software back ?
thanks!
Click to expand...
Click to collapse
You have guide how to downgrade. And it is sticky. http://forum.xda-developers.com/showthread.php?t=2100642
It is easyer to make new thread, than to look for it.
Sent from Galaxy S Advance
Why dont you post in the existing thread?
Sent from my GT-I9070 using xda premium
shut_down said:
You have guide how to downgrade. And it is sticky. http://forum.xda-developers.com/showthread.php?t=2100642
It is easyer to make new thread, than to look for it.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thanks a lot ! i wil try it tomorrow!
Related
Hello,
I want to downgrade my phone from CM10.1 on an original Gingerbread ROM. First I have flashed a 2.3.4 version of DarkyRom. Now I want to have a stock firmware for my Galaxy.
All files that I could find were damaged. (Unpacked with 7ZIP and WinRAR). Then I found a T-Mobile branded version 2.3.6, but I hung permanently fixed in Bootloop.
What version can you recommend me and can you give me a three-part firmware?
Thank you very much
greeting
Julian
jolle-pe said:
Hello,
I want to downgrade my phone from CM10.1 on an original Gingerbread ROM. First I have flashed a 2.3.4 version of DarkyRom. Now I want to have a stock firmware for my Galaxy.
All files that I could find were damaged. (Unpacked with 7ZIP and WinRAR). Then I found a T-Mobile branded version 2.3.6, but I hung permanently fixed in Bootloop.
What version can you recommend me and can you give me a three-part firmware?
Thank you very much
greeting
Julian
Click to expand...
Click to collapse
you can download the firmware you want from sammobile.com
jolle-pe said:
Hello,
I want to downgrade my phone from CM10.1 on an original Gingerbread ROM. First I have flashed a 2.3.4 version of DarkyRom. Now I want to have a stock firmware for my Galaxy.
All files that I could find were damaged. (Unpacked with 7ZIP and WinRAR). Then I found a T-Mobile branded version 2.3.6, but I hung permanently fixed in Bootloop.
What version can you recommend me and can you give me a three-part firmware?
Thank you very much
greeting
Julian
Click to expand...
Click to collapse
Hey,
Just checking, did you flash in a file called dbsdata.rfs.tar? That fille is essential when downgrading from CM9/CM10/10.1 because of different data partitions and so on. If you don't flash it in the phone ends up in a bootloop...
Try flash in dbsdata.rfs.tar (you can get it from so many places) then flash it in via Odin, then report back
Hope I helped
Sent from my GT-I9000
Hey
The way you upgrade, the Same way u can downgrade
I have a thread (link below) which you can use.
Sent from my GT-I9300 using xda app-developers app
tchindalia said:
Hey
The way you upgrade, the Same way u can downgrade
I have a thread (link below) which you can use.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Nope due to partition format and layout changes. No new ROM uses the Samsung format or layout
Sent from my GT-I9000 using xda app-developers app
i tried to upgrade From GB to JB via ODIN
JB I8160XXMC8 from samsung-updates.com
doesn't contain pit file
the phone bricked it restarts before bootscreen animation
any help plz ?
Master-ZizO said:
i tried to upgrade From GB to JB via ODIN
JB I8160XXMC8 from samsung-updates.com
doesn't contain pit file
the phone bricked it restarts before bootscreen animation
any help plz ?
Click to expand...
Click to collapse
install leaked mb2 and then mc8..
mkel91 said:
install leaked mb2 and then mc8..
Click to expand...
Click to collapse
MB2 or MB4 is it ok ? Or Just MB2 ?
hy,
for installing the new jelly firmware for i8160 please follow next step:
1. flash first firmware jelly bean I8160_OXAMB2, like in this link:
http://www.youtube.com/watch?v=2LZqCD3-Ytk
2. then flash the last firmware jelly bean I8160XXMC8
Thank u all...
problem solved after flashing MB4 or MB2 then Going to MC8
baseband unknow
flashing stopped on "nand write" while flash mb2 or mb4.
if flashing mc8 directly from gb stock rom region hongkong success..
but baseband unknow.
Try flash back to gb stock different region still baseband unknow..
Now i flash gb stock region hk, and back normal again..
How should i do?thank u.
For a moment I thought I wasn't browsing on the ace forums....! Had to check back... Please post on the right forums peeps.
Sent from my GT-Xperia S using xda premium
First of all i'm new to this forum...i ordered Samsung Galaxy S Advance in flipkart..and it will be arriving by today...I'm making sure that i do not HARDBRICK it within a few hours after buying.. so please help me..any help would be appreciated....
All i want to know is that
#1 The phone will be arriving with a stock indian gingerbread firmware..Can i flash any country's jellybean firmware onto this stock firmware via Odin 3.07..??
#2 If 'YES' what firmware would be most useful??...( what about the official indian JB FW DDULP8??..because i have already downloaded it )
#3 Does 8GB and 16GB FW differ??
#4 If i flash the indian JB FW .. will i be able to install any JB ROM ( like JetMod,JellyMod ) in that firmware or are ROMs firmware dependent??
#5 The same goes for Kernels...Are they FW dependent or i can just install any JB kernel ( like cocore 6.0 and thunderzap , etc ) on any JB FW..??
This is the Final noob question..
#6 I know that the Binary count reset method by Shaan work on any JB FW...but specifically will it work for the indian official JB FW DDULP8..??
Manikandan Pradeep said:
First of all i'm new to this forum...i ordered Samsung Galaxy S Advance in flipkart..and it will be arriving by today...I'm making sure that i do not HARDBRICK it within a few hours after buying.. so please help me..any help would be appreciated....
All i want to know is that
#1 The phone will be arriving with a stock indian gingerbread firmware..Can i flash any country's jellybean firmware onto this stock firmware via Odin 3.07..??
#2 If 'YES' what firmware would be most useful??...( what about the official indian JB FW DDULP8??..because i have already downloaded it )
#3 Does 8GB and 16GB FW differ??
#4 If i flash the indian JB FW .. will i be able to install any JB ROM ( like JetMod,JellyMod ) in that firmware or are ROMs firmware dependent??
#5 The same goes for Kernels...Are they FW dependent or i can just install any JB kernel ( like cocore 6.0 and thunderzap , etc ) on any JB FW..??
This is the Final noob question..
#6 I know that the Binary count reset method by Shaan work on any JB FW...but specifically will it work for the indian official JB FW DDULP8..??
Click to expand...
Click to collapse
Yes, you can flash INU fw using odin and it doesnt matter ur phone is 8/16gb.
Roms are dependent but they work on different fw's so, dont worry. Just make a nandroid backup from recovery and flash, if by chance u get a bootloop (stuck at logo) you can restore. :thumbup: and kernels are not dependent. Cocore6 works great with Indian fw. And binary wont increase on flashing with cwm/twrp.
szzlgupta said:
Yes, you can flash INU fw using odin and it doesnt matter ur phone is 8/16gb.
Roms are dependent but they work on different fw's so, dont worry. Just make a nandroid backup from recovery and flash, if by chance u get a bootloop (stuck at logo) you can restore. :thumbup: and kernels are not dependent. Cocore6 works great with Indian fw. And binary wont increase on flashing with cwm/twrp.
Click to expand...
Click to collapse
dd/zip flashing via recovery/universal kernel app...which is the safest method for flashing kernels??..
another question: what are the possibilities of getting a HARDBRICK??? and is there any WORKAROUNDS for hardbrick??...thnx in advance :good:
Manikandan Pradeep said:
dd/zip flashing via recovery/universal kernel app...which is the safest method for flashing kernels??..
another question: what are the possibilities of getting a HARDBRICK??? and is there any WORKAROUNDS for hardbrick??...thnx in advance :good:
Click to expand...
Click to collapse
Easiest and safest way is flashing through recovery..
There are very less chances of hard brick..Just follow the steps and you should be good.
There are no workarounds for a hard brick.. except jtag repair.. which is usually done in the service centre..
Sent from my GT-I9070 using xda premium
rushilkr said:
Easiest and safest way is flashing through recovery..
There are very less chances of hard brick..Just follow the steps and you should be good.
There are no workarounds for a hard brick.. except jtag repair.. which is usually done in the service centre..
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I would say ukf is safer for first time flashing. Easy and safe.
szzlgupta said:
I would say ukf is safer for first time flashing. Easy and safe.
Click to expand...
Click to collapse
To each his own
Sent from my GT-I9070 using xda premium
Manikandan Pradeep said:
First of all i'm new to this forum...i ordered Samsung Galaxy S Advance in flipkart..and it will be arriving by today...I'm making sure that i do not HARDBRICK it within a few hours after buying.. so please help me..any help would be appreciated....
All i want to know is that
#1 The phone will be arriving with a stock indian gingerbread firmware..Can i flash any country's jellybean firmware onto this stock firmware via Odin 3.07..??
#2 If 'YES' what firmware would be most useful??...( what about the official indian JB FW DDULP8??..because i have already downloaded it )
#3 Does 8GB and 16GB FW differ??
#4 If i flash the indian JB FW .. will i be able to install any JB ROM ( like JetMod,JellyMod ) in that firmware or are ROMs firmware dependent??
#5 The same goes for Kernels...Are they FW dependent or i can just install any JB kernel ( like cocore 6.0 and thunderzap , etc ) on any JB FW..??
This is the Final noob question..
#6 I know that the Binary count reset method by Shaan work on any JB FW...but specifically will it work for the indian official JB FW DDULP8..??
Click to expand...
Click to collapse
Make sure you know if you have a GT-I9070 or GT-I9070P. You can easily brick your phone putting firmware for on on the other.
try samsung kies update or OTA first.. this way you can experience kies or over the air update..
if its not available, you can do Odin update..
make sure you have atleast 50-80% battery charged..
Hi all! few days ago i flashed stock 2.3.6 GB ROM for Indian region and now i see that there is a bug with touch screen while phone is charging.. so can anyone provide me with a working download link for 2.3.6(or older european region stock ROM), i'm trying to find it but all the hotfile links from 2011 are dead
samfirmware.com
Sent from my GT-S5830 using xda app-developers app
bobahajduk said:
Hi all! few days ago i flashed stock 2.3.6 GB ROM for Indian region and now i see that there is a bug with touch screen while phone is charging.. so can anyone provide me with a working download link for 2.3.6(or older european region stock ROM), i'm trying to find it but all the hotfile links from 2011 are dead
Click to expand...
Click to collapse
Wrong section... there's a Q&A Thrread, use it the nex time for this kind of questions
KTM
http://www.generalfiles.net/download/gs5b41f691h16i0/S5830XWKTM_S5830OXXKT3_FOP_v2.3.6.zip.html
KTQ
www.mediafire.com/download/0wvw9uj2cbzmcqr/S5830XWKTQ_S5830OXXKT4_FOP.rar
bobahajduk said:
Hi all! few days ago i flashed stock 2.3.6 GB ROM for Indian region and now i see that there is a bug with touch screen while phone is charging.. so can anyone provide me with a working download link for 2.3.6(or older european region stock ROM), i'm trying to find it but all the hotfile links from 2011 are dead
Click to expand...
Click to collapse
Here is the link on how to install stock rom using odin along with all firmwares,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I helped
Hi guys I'm running CM11, ICS 4.2.2 on my Galaxy Ace, GT-S5660D and want to downgrade to the original OS the phone came with, I believe it was GB 2.3.6 or 2.3.7. My phone is rooted but I have no idea how to bring it back to the original Android version. Any help would be appreciated!
dankup said:
Hi guys I'm running CM11, ICS 4.2.2 on my Galaxy Ace, GT-S5660D and want to downgrade to the original OS the phone came with, I believe it was GB 2.3.6 or 2.3.7. My phone is rooted but I have no idea how to bring it back to the original Android version. Any help would be appreciated!
Click to expand...
Click to collapse
really simple my bro
first download the firmware from sammobile
then flash it via odin
just select the rom carefully for your GT-S5660D variant
dont download the rom of I or C variant it will brick your phone
if you have any problem ask for help
sharingan said:
really simple my bro
first download the firmware from sammobile
then flash it via odin
just select the rom carefully for your GT-S5660D variant
dont download the rom of I or C variant it will brick your phone
if you have any problem ask for help
Click to expand...
Click to collapse
Thanks for the quick response!
I'm not sure what odin is and I don't think I used it when I flashed CM11 onto my Ace.
dankup said:
Thanks for the quick response!
I'm not sure what odin is and I don't think I used it when I flashed CM11 onto my Ace.
Click to expand...
Click to collapse
no bro
odin is used to flash roms till 2.3.6 on ace
it does not flash roms above gingerbread
Have a look at this thread..
http://forum.xda-developers.com/showthread.php?t=2609021
[Guide] Know your Device:Galaxy Ace GT-S5830 ~Root~Odin~CWM~ROM LIST |2014.06.27|
nix01 said:
Have a look at this thread..
http://forum.xda-developers.com/showthread.php?t=2609021
[Guide] Know your Device:Galaxy Ace GT-S5830 ~Root~Odin~CWM~ROM LIST |2014.06.27|
Click to expand...
Click to collapse
Thanks this looks promising. But when looking at this site http://www.tsar3000.com/Joomla/inde...laxy-ace-firmwares&catid=55:samsung&Itemid=82 there's no Canada under S5830, only European countries. Should I download the Canadian firmware under S5830D?
dankup said:
Thanks this looks promising. But when looking at this site http://www.tsar3000.com/Joomla/inde...laxy-ace-firmwares&catid=55:samsung&Itemid=82 there's no Canada under S5830, only European countries. Should I download the Canadian firmware under S5830D?
Click to expand...
Click to collapse
Before you install anything, is your phone GT-5660D or GT-5830? Make sure to download the original firmware for your device. Installing any firmware meant for another device on your phone can, in the worst case, hard-brick your device. As for the firmwares, you can download the one that is near to your region. In fact, any regional firmware for a particular phone will work on it. You can also find all the Samsung Galaxy Ace firmwares in the following link,
[Share] All Samsung Galaxy Ace S5830 Stock Firmwares (2.3.X) Ever Released
Hope I Helped
I just did it with the help of that thread. Thanks all.
dankup said:
Hi guys I'm running CM11, ICS 4.2.2 on my Galaxy Ace, GT-S5660D and want to downgrade to the original OS the phone came with, I believe it was GB 2.3.6 or 2.3.7. My phone is rooted but I have no idea how to bring it back to the original Android version. Any help would be appreciated!
Click to expand...
Click to collapse
Maybe it's useful for the next time too
[TUTORIAL] HOW TO GO BACK FROM CWM 6.x TO CWM 5.x