when i choose to wipe davlvik cache, it show that: E: unknow volume for patch [/sd-ext]
is it a error? i use C6603, locked bootloader and cwm 6.0.2.8, thanks in advance.
tungnguyen253 said:
when i choose to wipe davlvik cache, it show that: E: unknow volume for patch [/sd-ext]
is it a error? i use C6603, locked bootloader and cwm 6.0.2.8, thanks in advance.
Click to expand...
Click to collapse
I believe this is normal, I believe this is you external SD card (so this is a good thing). Don't worry about that message, if you get while rebooting a message that your applications are re-optimising or similar then it worked, if not. Then try it again.
Related
Hello, I'm new to these forums and have come to them under some unfortunate circumstances.
I went to update my device (MOTO G 2014) and had an error (cant remember what it said), anyway I rebooted my device and it wouldnt load after the 'BOOT LOADER UNLOCKED' warning screen. I went into TWRP and went to reset my device and wiped the system. (feel like an idiot, then again I am..) So then I downloaded all the USB drivers and Android SDK along with adb+fastboot and attempted to sideload. during the sideload I got this error..
* failed to write data 'protocol fault (couldn't read status): Invalid argument' *
EDIT: the error is no showing up at * failed to write data 'protocol fault (no status)
I have swapped USB ports and tried a different USB cable, does anybody have any tips or do I have a paperweight on my hands?
Thanks in advance
Flash stock firmware.
motofirmware.center
Sent from my XT1031
If I understand, right now you have wiped system, and bootloop in Motorola logo.
If you can boot in recovery, then transfer a ROM to an microsd and flash from there.
UPDATE: managed to put 3 ROMs onto my sdcard but only one of them actually allows me to install it, but after I install it I am stuck at the boot screen, guessing I got the wrong ROM for my model, cm doesn't flash, it just says 'Failed!' and so does the most recent one from the website previously linked. Any tips? Model is XT1072. I have been sat at the boot screen for around 15-20 minutes, is it taking so long because of me clearing the dalvik cache?
PJT95 said:
UPDATE: managed to put 3 ROMs onto my sdcard but only one of them actually allows me to install it, but after I install it I am stuck at the boot screen, guessing I got the wrong ROM for my model, cm doesn't flash, it just says 'Failed!' and so does the most recent one from the website previously linked. Any tips? Model is XT1072. I have been sat at the boot screen for around 15-20 minutes, is it taking so long because of me clearing the dalvik cache?
Click to expand...
Click to collapse
Lemme guess u tried to flash "titan" CM and not "thea" one?
LuK1337 said:
Lemme guess u tried to flash "titan" CM and not "thea" one?
Click to expand...
Click to collapse
I have tried both, both are returning the same error
"E: error executing updater binary in zip"
Is this something to do with my TWRP being at v2.7.1.1?
PJT95 said:
I have tried both, both are returning the same error
"E: error executing updater binary in zip"
Is this something to do with my TWRP being at v2.7.1.1?
Click to expand...
Click to collapse
http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3088800
get this recovery.
LuK1337 said:
http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3088800
get this recovery.
Click to expand...
Click to collapse
Thanks for your help and thank you to everyone else who replied to the thread. To anybody else who will maybe see this thread and who are stuck with the same errors, I fixed this by simply flashing the latest recovery using 'fastboot flash recovery [NameOfRecovery].img' then proceeded to install the ROM compatible with my device which I downloaded to my external SD Card.
Again, thanks
Hello, i have a bricked asus memo pad 7 (me176cx), when i try to install the factory firmware (UL-K013-WW-12.10.1.33-user.zip) the cwm and the twrp2 give me a error "unable to mount /factory" and i can't install the rom.
How can i fix that?
Thanks
PD: sorry for my caveman english (?)
kitsunezero said:
Hello, i have a bricked asus memo pad 7 (me176cx), when i try to install the factory firmware (UL-K013-WW-12.10.1.33-user.zip) the cwm and the twrp2 give me a error "unable to mount /factory" and i can't install the rom.
How can i fix that?
Thanks
PD: sorry for my caveman english (?)
Click to expand...
Click to collapse
Hello,
I have reported this thread to be moved to right Q&A inorder to get expertise help
-Vatsal
I never had to mount those partitions when installing that ROM when I bricked mine. I just wiped all caches and installed from zip. Are you doing this?
paulgiro said:
I never had to mount those partitions when installing that ROM when I bricked mine. I just wiped all caches and installed from zip. Are you doing this?
Click to expand...
Click to collapse
I'm a idiot http://forum.xda-developers.com/memo-pad-7/general/5-0-brick-solution-asus-memo-pad-7-t3134814,
I didn't read this "This package is for "K013" devices; this is a "K013_1"." I was bricked for a week because of a random device "name change?" Well here are the steps I took to make a flashable lollipop that wouldnt brick me. What you are doing here is telling the script that does the update that it does not need to verify your tablet model since it is wrong anyways.
Now i follow the steps and my tablet is boot, i'm waiting.
EDIT: Still bricked, now i can enter in fastboot mode but when i power on the tablet, after the logo, the screen is black
I have the same problem and can't find any solution yet :crying::crying:
sidane12 said:
I have the same problem and can't find any solution yet :crying::crying:
Click to expand...
Click to collapse
i can install the original firmware, but now still bricked with the same error
kitsunezero said:
i can install the original firmware, but now still bricked with the same error
Click to expand...
Click to collapse
try to format all partitions and shutdown, then boot into bootloader and load temp recovery and reflash .33 then boot android normally if still doesnt work, then reinstall once more but without wiping any partitions, if it decides to boot to bootanimation but its stuck there you need to simply make a reboot and then it should boot.
Ruben Craveiro said:
try to format all partitions and shutdown, then boot into bootloader and load temp recovery and reflash .33 then boot android normally if still doesnt work, then reinstall once more but without wiping any partitions, if it decides to boot to bootanimation but its stuck there you need to simply make a reboot and then it should boot.
Click to expand...
Click to collapse
how can i do that? can you make a tutorial please ><?
kitsunezero said:
how can i do that? can you make a tutorial please ><?
Click to expand...
Click to collapse
Load temp recovery select wipe, advanced wipe, format all, reboot to bootloader, load temp recovery, install, reboot normally, if it boots but its on bootloop just make another rebokt and itshould boot
Hi,
I've maybe bricked my phone. I've to enter the encryption key after reboot, but the phone tells me that I have to make a factory reset even the password is correct. I tried to wipe it with TWRP (twrp-3.0.2-0-nemo.img) but it failed because /data cannot be mounted.
How can I wipe the phone? Help please!
honor5c said:
Hi,
I've maybe bricked my phone. I've to enter the encryption key after reboot, but the phone tells me that I have to make a factory reset even the password is correct. I tried to wipe it with TWRP (twrp-3.0.2-0-nemo.img) but it failed because /data cannot be mounted.
How can I wipe the phone? Help please!
Click to expand...
Click to collapse
Solved: I've extracted the recovery image from the stock rom and flashed it via fastboot.
honor5c said:
Solved: I've extracted the recovery image from the stock rom and flashed it via fastboot.
Click to expand...
Click to collapse
I was about to tell you that
honor5c said:
Hi,
I've maybe bricked my phone. I've to enter the encryption key after reboot, but the phone tells me that I have to make a factory reset even the password is correct. I tried to wipe it with TWRP (twrp-3.0.2-0-nemo.img) but it failed because /data cannot be mounted.
How can I wipe the phone? Help please!
Click to expand...
Click to collapse
How did you encrypt the phone? I can't see any option on NEM-L51
Pou-chi said:
How did you encrypt the phone? I can't see any option on NEM-L51
Click to expand...
Click to collapse
Go to settings--> security
honor5c said:
Solved: I've extracted the recovery image from the stock rom and flashed it via fastboot.
Click to expand...
Click to collapse
Glad that you fixed it
Hi..
I have SM-N950F, tried TWRP recovery given in the link, once I enter to the recovery it won't show any access to data, and when I try to choose a storage all of them tell me (0MB) like if it has been formatted! And can't format cache or data it just says error or something.
The real problem is once I enter TWRP the device will stack into bootloop if I rebooted it and no way to fix this but to flash a stock ROM via Odin -or that the way I know-.
I did check "OEM Unlock" and "USB Debugging" options on the device.
Can anyone help please?
All I want is to root my device.
Thanks in advance..
https://forum.xda-developers.com/showthread.php?t=3674036
---------------------------------------------------------------------------------------------------------------------------------
Sorry for the bothering, Ive solved it now..
Don't know if I can delete the post or not.
sm-n950f
how did you solve the problem???
yeah same here. I think we should wait for the official release of the TWRP for Note8.
x-poke said:
how did you solve the problem???
yeah same here. I think we should wait for the official release of the TWRP for Note8.
Click to expand...
Click to collapse
you have to format the data partition (internal storage) because TWRP cannot read encrypted storage. formatting data will wipe your internal storage so backup first.
Hi guys. I tried to see other threads but I haven't fint anything. Probably there is but I'm beginner and I don't understand so much Anyway this is the problem:
model LLD-L31
build number LLD-L31 8.0.0.133(C432)
FPR unlocked
bootloader unloced
I tried to install root(Magisk-v16.4) in my device. So I unlocked bootloader, installed TWPR(Pretorian80 2.3.1) successfully but this error "Failed to unmount '/system'(Device or resource busy)" appeared. So I try to format data by recovery hoping that it could be able to read partitions after that. I couldn't yet flash file.Zip so I tried to upgrade Twpr in latest version installing it in recovey ramdisk.
After that I'm not able anymore to get into twpr cause this error appered:
[Func NO : 11 (recovery image) Error NO : 2 (load failed!)
Now, I fortunatly turn on the phone, using it with no problems. I can enter in fastboot and eRecovery. I tried to swipe data/reset but the same error appears.
Can I fix it easily? Tell me if you have any tips, thank you:good:
scugnizz said:
Hi guys. I tried to see other threads but I haven't fint anything. Probably there is but I'm beginner and I don't understand so much Anyway this is the problem:
model LLD-L31
build number LLD-L31 8.0.0.133(C432)
FPR unlocked
bootloader unloced
I tried to install root(Magisk-v16.4) in my device. So I unlocked bootloader, installed TWPR(Pretorian80 2.3.1) successfully but this error "Failed to unmount '/system'(Device or resource busy)" appeared. So I try to format data by recovery hoping that it could be able to read partitions after that. I couldn't yet flash file.Zip so I tried to upgrade Twpr in latest version installing it in recovey ramdisk.
After that I'm not able anymore to get into twpr cause this error appered:
[Func NO : 11 (recovery image) Error NO : 2 (load failed!)
Now, I fortunatly turn on the phone, using it with no problems. I can enter in fastboot and eRecovery. I tried to swipe data/reset but the same error appears.
Can I fix it easily? Tell me if you have any tips, thank you:good:
Click to expand...
Click to collapse
Hi, Not familiar with that Version of TWRP, can you link please?
Failure to unmount system usually means you have system set as "read only", try to change within twrp (when you get a working version flashed).
You say you tried to update TWRP to latest edition, exactly what edition did you flash?
Anyway eRecovery will rescue the phone back to when first turned on.
Sparkrite said:
Hi, Not familiar with that Version of TWRP, can you link please?
Failure to unmount system usually means you have system set as "read only",try to change within twrp (when you get a working version flashed).
You say you tried to update TWRP to latest edition, exactly what edition did you flash?
Anyway eRecovery will rescue the phone back to when first turned on.
Click to expand...
Click to collapse
Hi man thank you for your answer.
I flashed this versionhttps://dl.twrp.me/surnia/twrp-3.2.3-0-surnia.img.html
,try to change within twrp (when you get a working version flashed).
Click to expand...
Click to collapse
I can't enter anymore within TWPR, only in stock recovery.
What made you flash that version, where does it say its for the H9L ?
Try either of these, I use V.01 :-
https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
Make sure you use the following command "fastboot flash recovery_ramdisk NAME.img"
When flashed, issue "fastboot reboot" while holding down Vol+, when bootloader page blanks immediately remove USB lead and continue to hold Vol+ until TWRP appears.
TWRP may stall for a while on LOGO page, be patient.
What made you flash that version, where does it say its for the H9L ?
Click to expand...
Click to collapse
I'm dumb man that's all:silly:
Anyway it's fixed now, I love you (thanks put, at least).
Failure to unmount system usually means you have system set as "read only",try to change within twrp
Click to expand...
Click to collapse
Last thing if you can..
On mount section the option mount system partition read-only is disactivated but, at opening, error appears in the same way so I don't know how to disable it definitively
Try formatting Data and then reboot to TWRP (recovery).
Man I'm a disaster:crying:
I formatted but I also had the brilliant idea to delete the whole system, without creating any backup by twpr, obviously. So now I have no OS in my device:good:
I had look for stock firmware with Firmware Finder and I have find one whit these files(bottom photo). Which have I to download?
Then I'll probably follow this thread(https://forum.xda-developers.com/9-lite/help/os-installed-t3787136) to continue. Is it right??
At this stage you are probably better off using eRecovery to bring your phone back to full stock.
From off press and hold Vol Up and connect USB, wait for eRecovery and select "Download latest version and recovery".
Needs WiFi.
savior
scugnizz said:
savior
Click to expand...
Click to collapse
Ah Great, good to hear.
Now, go and flash TWRP and Magisk, but follow the instructions EXACTLY !