Database Develop

[Q] Looking for help. Cant boot phone, recovery nor use adb commands.

Hej guys. I really hope that you can help me with my problem
Have been trying for 2 days and looking at post but haven't been able to get it fixed.
Here goes.
I have been playing around with custom roms on my htc one for a while now.
Then when i was about to install a new custom rom, i first wiped my phone.
I properly wiped something that should not be wiped, because i ended up with no os and no custom rom zip file that i could install in twrp.
I then tryed sideloading revolutions, and it seemed to work because it ended up booting on the phone and i could select what programs too install with it... but halfway through it stoped and rebooted.
now i cant even get into recovery anymore, and booting the phone only gets it to htc briliant logo. Then it restarts and tryes going into recovery, but it cant, and ends up just restarting over and over again.
Tryed flashing cwm and twrp again, but still cant get into recovery.
adb dont fint my device, and i have tryed all drivers i could find.
Tryed using a RUU, but it fails. Properly because its not the right one, but cant fint one that fits.
Sooo... i think im in a real pickle right now.
my radio is :4a.14.3250.13
hboot: 1.44.0000
Thinking about going back with my phone, but with the warranty gone i dont know if they'll even look at it.
Hoping for some advise, or some ideas on what to do.
-dealba

fastboot erase cache in terminal or with all in one toolkit

Arh thanks for your reply.
Cant belive i dident try that.
but it worked, im now able to get into twrp.
It says that i have 0 mb internal storage?
should i try to flash twrp again or what should my aproach be ?

dealba said:
Arh thanks for your reply.
Cant belive i dident try that.
but it worked, im now able to get into twrp.
It says that i have 0 mb internal storage?
should i try to flash twrp again or what should my aproach be ?
Click to expand...
Click to collapse
try reboot recovery if that doesnt work install cwm non touch. i love twrp but i had the same issue with it and i havent had it with cwm

skinsfanbdh said:
try reboot recovery if that doesnt work install cwm non touch. i love twrp but i had the same issue with it and i havent had it with cwm
Click to expand...
Click to collapse
Okay thanks
So i tryed installing cwm the non touch version. but it says the same thing as twrp.
And that is that it cant mount /sdcard/

dealba said:
Okay thanks
So i tryed installing cwm the non touch version. but it says the same thing as twrp.
And that is that it cant mount /sdcard/
Click to expand...
Click to collapse
i dont think that is a problem. im not absolutely sure about that but what is the next step you trying to accomplish

skinsfanbdh said:
i dont think that is a problem. im not absolutely sure about that but what is the next step you trying to accomplish
Click to expand...
Click to collapse
Well, im really just trying to get an os flashed back on the phone so i can boot it, either by another custom rom or a stock rom.
But since i cant use adb commands, how do i get a new rom on there?

dealba said:
Well, im really just trying to get an os flashed back on the phone so i can boot it, either by another custom rom or a stock rom.
But since i cant use adb commands, how do i get a new rom on there?
Click to expand...
Click to collapse
you on a windows computer?

dealba said:
Well, im really just trying to get an os flashed back on the phone so i can boot it, either by another custom rom or a stock rom.
But since i cant use adb commands, how do i get a new rom on there?
Click to expand...
Click to collapse
i have had the same problem. what i did is in twrp recovery go to wipe --- format data --- type yes (WARNING you will lose all your files)

skinsfanbdh said:
you on a windows computer?
Click to expand...
Click to collapse
Yes, im running windows

dealba said:
Yes, im running windows
Click to expand...
Click to collapse
download all in one toolkit if you havent already its easy to use and easier for me to tell you what to do. plus i dont know how well you know adb and fastboot commands

rambo12345 said:
i have had the same problem. what i did is in twrp recovery go to wipe --- format data --- type yes (WARNING you will lose all your files)
Click to expand...
Click to collapse
okay thanks, now i can see my sdcard.
But still wondering how to get a rom on it so i can flash from twrp..

dealba said:
okay thanks, now i can see my sdcard.
But still wondering how to get a rom on it so i can flash from twrp..
Click to expand...
Click to collapse
adb sideload
its an option in the all in one tool kit but its easier or you can type the command

skinsfanbdh said:
download all in one toolkit if you havent already its easy to use and easier for me to tell you what to do. plus i dont know how well you know adb and fastboot commands
Click to expand...
Click to collapse
I got the toolkit now
got a 5 min post restriction so little slow on replying

dealba said:
I got the toolkit now
got a 5 min post restriction so little slow on replying
Click to expand...
Click to collapse
i think it it will be over after 3 more posts. plug your phone in. then open all in one toolkit and select adb sideload then just follow the on screen instructions

skinsfanbdh said:
i think it it will be over after 3 more posts. plug your phone in. then open all in one toolkit and select adb sideload then just follow the on screen instructions
Click to expand...
Click to collapse
Okay, did the side loader, and used android revolutions rom. It installed and and after staying on boot animation a few minnuts it started.
Thank you so much for your help, really appreciate it

dealba said:
Okay, did the side loader, and used android revolutions rom. It installed and and after staying on boot animation a few minnuts it started.
Thank you so much for your help, really appreciate it
Click to expand...
Click to collapse
no problem. have fun:victory:

skinsfanbdh said:
fastboot erase cache in terminal or with all in one toolkit
Click to expand...
Click to collapse
So I'll try here first. I am having the same issue, I can't get the device to boot into recovery, no matter if I clear the cache, or flash either one of twrp or CWM.
I unlocked the bootloader, I think used the all in one toolkit to flash the recovery. When that didn't work, I erased the cache and manually flashed the recovery, and it said it pushed successfully.
I am at a loss, I have no idea what to try next, any help would be appreciated.
******Finally got it, I had to disable Fast Boot in the Power options in Settings******

How do you copy update.zip from external to internal SD?
Sorry if it's a total no-brainer, but how do I manually copy a recovery zip to the internal update.zip? Can I do this from my phone (which is stuck in a bootloop: see below)? Or do I have to use ADB with my computer?
Turbojugend said:
So I'll try here first. I am having the same issue, I can't get the device to boot into recovery, no matter if I clear the cache, or flash either one of twrp or CWM.
I unlocked the bootloader, I think used the all in one toolkit to flash the recovery. When that didn't work, I erased the cache and manually flashed the recovery, and it said it pushed successfully.
I am at a loss, I have no idea what to try next, any help would be appreciated.
******Finally got it, I had to disable Fast Boot in the Power options in Settings******
Click to expand...
Click to collapse
My situation:
Using Open Recovery I tried to install CM7 with custom kernel on my XT720
It gave an error: "assert failed: write_raw_image... Status 7" As I was looking that up, my phone blackscreened. After a while I pulled the battery.
Then on startup it went into a bootloop after a picture of a broken screen saying "2ndboot kernel restart in progress." (Presumably the kernel wasn't properly applied?)
Trying to boot into bootloader says battery is too low.
Phone will only turn on when plugged into outlet.
What I think I need to do:
- Copy a good update from my external SD over the bad update.zip on the internal SD, and apply the update to reset the kernel, etc.
- Open Recovery could do this, if I could load it.
- I could load Openrecovery if I could get the bootloader to run,
- I could get the bootloader to run if my battery would charge

Bricked XT1072

Hi Guys,
I stupidly did not realise my device (XT1072) was a different slightly different model to the moto g 2014.
I unlocked the bootloader and installed TWRP, then tried to install Cyanogenmod 12.1, this failed giving an error "Error executing updater binary in zip" Which I guess is due to it being a different model, right? After receiving this error I did some googling and found on a few sites that I should wipe data, system, cache & dalvik cache to resolve this. I did this and tried to flash it again, with the same error. Now my phone is stuck on the "warning bootloader unlocked screen" I can boot into fastboot mode, but is there any official Motorola images for my device anywhere? I have had a look online and cant find anything. :crying:
Any help would be much appreciated.
Thanks

Format system is completely wipe previous android version,
You need a custom ROM (I'm assuming you have custom recovery for your device model)
Or fastboot a original image for you're device

Hi
ohmygoddude said:
Hi Guys,
I stupidly did not realise my device (XT1072) was a different slightly different model to the moto g 2014.
I unlocked the bootloader and installed TWRP, then tried to install Cyanogenmod 12.1, this failed giving an error "Error executing updater binary in zip" Which I guess is due to it being a different model, right? After receiving this error I did some googling and found on a few sites that I should wipe data, system, cache & dalvik cache to resolve this. I did this and tried to flash it again, with the same error. Now my phone is stuck on the "warning bootloader unlocked screen" I can boot into fastboot mode, but is there any official Motorola images for my device anywhere? I have had a look online and cant find anything. :crying:
Any help would be much appreciated.
Thanks
Click to expand...
Click to collapse
Hi,
I am facing exactly the same problem here. Could you please let me know if you find any solution!!! please
Thanks

omarhowlader said:
Hi,
I am facing exactly the same problem here. Could you please let me know if you find any solution!!! please
Thanks
Click to expand...
Click to collapse
You might want to take a look at this thread: http://forum.xda-developers.com/mot...e-restore-moto-e-2015-stock-firmware-t3054303

omarhowlader said:
Hi,
I am facing exactly the same problem here. Could you please let me know if you find any solution!!! please
Thanks
Click to expand...
Click to collapse
Hi,
I too faced this issue. I've seen this error mostly with the Team Win Recoveries(TWRP). Switch to philiz recovery touch.

Still no luck
kishorebvs said:
Hi,
I too faced this issue. I've seen this error mostly with the Team Win Recoveries(TWRP). Switch to philiz recovery touch.
Click to expand...
Click to collapse
Hi,
Thank you for your reply. I also tried with CWM_Touch_Titan_v2 recovery image. But when I tried to flash the stock rom RETGBALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml using mfastboot method, it shows on the phone screen "image too large".
As you have faced the same problem, would you be kind enough to give a step by step instruction to solve the issue. My phone is just stuck to unlocked bootloader warning screen for days.
My phone is Moto g XT1072 4G LTE.
Your help could save my days...
Thanks.

omarhowlader said:
Hi,
Thank you for your reply. I also tried with CWM_Touch_Titan_v2 recovery image. But when I tried to flash the stock rom RETGBALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml using mfastboot method, it shows on the phone screen "image too large".
As you have faced the same problem, would you be kind enough to give a step by step instruction to solve the issue. My phone is just stuck to unlocked bootloader warning screen for days.
My phone is Moto g XT1072 4G LTE.
Your help could save my days...
Thanks.
Click to expand...
Click to collapse
Why are u flashing an xml file? XML files are not rom files
The link provided above by mic_he has step by step instructions to restore phone back to stock
Your phone is not bricked. You deleted your system so there is no os to boot. The link should restore you back to stock

mic_he said:
You might want to take a look at this thread: http://forum.xda-developers.com/mot...e-restore-moto-e-2015-stock-firmware-t3054303
Click to expand...
Click to collapse
Thank you,
I have tried those instruction earlier. when I enter "mfastboot flash bootloader bootloader.img" is says "Bootloader preflash validation failed" and when I enter "mfastboot flash system system.img_sparsechunk.0" onthe phone screen is says "Image too large". After going through all the steps when I reboot, it does not ever get past unlocked bootloader warning screen.
I really do not know which other option to try??
---------- Post added at 07:30 PM ---------- Previous post was at 07:26 PM ----------
Moto G User said:
Why are u flashing an xml file? XML files are not rom files
The link provided above by mic_he has step by step instructions to restore phone back to stock
Your phone is not bricked. You deleted your system so there is no os to boot. The link should restore you back to stock
Click to expand...
Click to collapse
I could not find any zip file of the stock rom. I downloaded the stock rom from that link but I am having error as i posted earlier.
Thanks

ohmygoddude said:
Hi Guys,
I stupidly did not realise my device (XT1072) was a different slightly different model to the moto g 2014.
I unlocked the bootloader and installed TWRP, then tried to install Cyanogenmod 12.1, this failed giving an error "Error executing updater binary in zip" Which I guess is due to it being a different model, right? After receiving this error I did some googling and found on a few sites that I should wipe data, system, cache & dalvik cache to resolve this. I did this and tried to flash it again, with the same error. Now my phone is stuck on the "warning bootloader unlocked screen" I can boot into fastboot mode, but is there any official Motorola images for my device anywhere? I have had a look online and cant find anything. :crying:
Any help would be much appreciated.
Thanks
Click to expand...
Click to collapse
Unmounting system before flashing usually stops that problem. What I like to do is wipe data, system, cache & dalvik then reboot to recovery before flashing the rom.
Sent from my GT-P5210 using Tapatalk

could you solve the problem with the XT1072?
hello sir! could you solve the problem with thw XT1072? Can you give me some instructions? cheers

It works!!!!! I could restore my system back with these steps!
Here´s the info
http://forum.xda-developers.com/mot...e-restore-moto-e-2015-stock-firmware-t3054303
I followed the steps and when I was triyng to Flash each of the partitions in sequence using mfastboot get an error
I get an error with one of the files, (don´t remember now but I think was with the mfastboot flash logo logo.bin line
This give me an error, try to fix it and i couldn´t so I continue with the other files in the order listed and when the process was finished the phone was working again!!!!

Enter twrp recovery
Wipe system data cache dalvik
Put any rom like cm in microsd card or usb
And flash it using twrp

ohmygoddude said:
Hi Guys,
I stupidly did not realise my device (XT1072) was a different slightly different model to the moto g 2014.
I unlocked the bootloader and installed TWRP, then tried to install Cyanogenmod 12.1, this failed giving an error "Error executing updater binary in zip" Which I guess is due to it being a different model, right? After receiving this error I did some googling and found on a few sites that I should wipe data, system, cache & dalvik cache to resolve this. I did this and tried to flash it again, with the same error. Now my phone is stuck on the "warning bootloader unlocked screen" I can boot into fastboot mode, but is there any official Motorola images for my device anywhere? I have had a look online and cant find anything. :crying:
Any help would be much appreciated.
Thanks
Click to expand...
Click to collapse
Hi, I have facing this problem too on my XT1063. My phone do boot to system but all the app are getting FCs, so I decided to flash another ROM like usual and All of this give me that "Error executing updater binary in zip", so I trie to wipe AND format all partition from TWRP and FASTBOOT with no success. Via Fastboot says: "File system type raw not supported." So I cant change to a new ROM, I cannot even flash other recovery....
So if you guys find a solution of this problem very users like me will be very thankful.

Completely wiped OS during reset :(

Hello, I'm new to these forums and have come to them under some unfortunate circumstances.
I went to update my device (MOTO G 2014) and had an error (cant remember what it said), anyway I rebooted my device and it wouldnt load after the 'BOOT LOADER UNLOCKED' warning screen. I went into TWRP and went to reset my device and wiped the system. (feel like an idiot, then again I am..) So then I downloaded all the USB drivers and Android SDK along with adb+fastboot and attempted to sideload. during the sideload I got this error..
* failed to write data 'protocol fault (couldn't read status): Invalid argument' *
EDIT: the error is no showing up at * failed to write data 'protocol fault (no status)
I have swapped USB ports and tried a different USB cable, does anybody have any tips or do I have a paperweight on my hands?
Thanks in advance

Flash stock firmware.
motofirmware.center
Sent from my XT1031

If I understand, right now you have wiped system, and bootloop in Motorola logo.
If you can boot in recovery, then transfer a ROM to an microsd and flash from there.

UPDATE: managed to put 3 ROMs onto my sdcard but only one of them actually allows me to install it, but after I install it I am stuck at the boot screen, guessing I got the wrong ROM for my model, cm doesn't flash, it just says 'Failed!' and so does the most recent one from the website previously linked. Any tips? Model is XT1072. I have been sat at the boot screen for around 15-20 minutes, is it taking so long because of me clearing the dalvik cache?

PJT95 said:
UPDATE: managed to put 3 ROMs onto my sdcard but only one of them actually allows me to install it, but after I install it I am stuck at the boot screen, guessing I got the wrong ROM for my model, cm doesn't flash, it just says 'Failed!' and so does the most recent one from the website previously linked. Any tips? Model is XT1072. I have been sat at the boot screen for around 15-20 minutes, is it taking so long because of me clearing the dalvik cache?
Click to expand...
Click to collapse
Lemme guess u tried to flash "titan" CM and not "thea" one?

LuK1337 said:
Lemme guess u tried to flash "titan" CM and not "thea" one?
Click to expand...
Click to collapse
I have tried both, both are returning the same error
"E: error executing updater binary in zip"
Is this something to do with my TWRP being at v2.7.1.1?

PJT95 said:
I have tried both, both are returning the same error
"E: error executing updater binary in zip"
Is this something to do with my TWRP being at v2.7.1.1?
Click to expand...
Click to collapse
http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3088800
get this recovery.

LuK1337 said:
http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3088800
get this recovery.
Click to expand...
Click to collapse
Thanks for your help and thank you to everyone else who replied to the thread. To anybody else who will maybe see this thread and who are stuck with the same errors, I fixed this by simply flashing the latest recovery using 'fastboot flash recovery [NameOfRecovery].img' then proceeded to install the ROM compatible with my device which I downloaded to my external SD Card.
Again, thanks

[HELP]Bricked (badly) nokia x2

so it all started on trying to root with kingroot and as expected i got stuck in bootloop
and after that i was able to flash philz
but on flashing cm11 (changed updater script to kis3 and then i flashed) it didnt work and the contentiously booted into recovery (phliz)
then i went through xda and found it philz dont work
so
I flash twrp
and this time (the unedited script) its said status 7
i flashed Stock ROM still wont boot
basically im stuck with twrp installed
I tried restoring cwm backup as well
and I cant get nokia care suite to work

kotic said:
so it all started on trying to root with kingroot and as expected i got stuck in bootloop
and after that i was able to flash philz
but on flashing cm11 (changed updater script to kis3 and then i flashed) it didnt work and the contentiously booted into recovery (phliz)
then i went through xda and found it philz dont work
so
I flash twrp
and this time (the unedited script) its said status 7
i flashed Stock ROM still wont boot
basically im stuck with twrp installed
I tried restoring cwm backup as well
and I cant get nokia care suite to work
Click to expand...
Click to collapse
If you have TWRP recovery 2.8.1.0 you can install Cyanogenmod 11 ...
i gotta say..
DON'T TRY TO EDIT USERSCRIPTS....YOU MIGHT END UP GETTING YOUR PHONE HARD BRICKED

DinethIrusha said:
If you have TWRP recovery 2.8.1.0 you can install Cyanogenmod 11 ...
i gotta say..
DON'T TRY TO EDIT USERSCRIPTS....YOU MIGHT END UP GETTING YOUR PHONE HARD BRICKED
Click to expand...
Click to collapse
I did try, but I'm getting status 7 error,everytime i try
i think I found the problem is that i cant mount system(cant check the box in options)
so I gotta find the solution now tought
and since I have no OS installed I'm pretty much hard bricked

kotic said:
I did try, but I'm getting status 7 error,everytime i try
i think I found the problem is that i cant mount system(cant check the box in options)
so I gotta find the solution now tought
and since I have no OS installed I'm pretty much hard bricked
Click to expand...
Click to collapse
Try this..
1. Download this Recovery to your sdcard and flash this using your current Recovery
TWRP Recovery
2. Reboot your recovery (Reboot>Recovery)
3. Download this Cm11 Last build and flash it
CM11 Latest Last Build
4. Reboot your phone (It'll take like 5-10mins to boot up so be patient)
TIP :
Hard-Brick - Hardware Bricked..which means you can't even turn on the phone and you can't recover your phone (dead phone)
Soft-Brick - Software Bricked....Which means you can turn on the phone and do whatever to recover your phone

Okay so I found out whats wrong with the phone,it seems twrp cant mount "system" and "data"
even in the mount>the two checkbox cant be checked
and idea to fix?

kotic said:
Okay so I found out whats wrong with the phone,it seems twrp cant mount "system" and "data"
even in the mount>the two checkbox cant be checked
and idea to fix?
Click to expand...
Click to collapse
try rooting your phone using nokia-x2-tools v.1.2..

help
i tried flashing CM13 in mhy NOKIA X2 DS RM-1013 with TWRP but forgot to make a backup of my data. The rom flashed but then it says no OS installed are u sure to reboot.. i don't understand what's wrong, please help me recover my phone

Flash new any stable rom

j€nish said:
Flash new any stable rom
Click to expand...
Click to collapse
please provide link to any stable ROM for NOKIA X2 RM-1013 product code 059V782

hard bricked
DinethIrusha said:
Try this..
1. Download this Recovery to your sdcard and flash this using your current Recovery
TWRP Recovery
2. Reboot your recovery (Reboot>Recovery)
3. Download this Cm11 Last build and flash it
CM11 Latest Last Build
4. Reboot your phone (It'll take like 5-10mins to boot up so be patient)
TIP :
Hard-Brick - Hardware Bricked..which means you can't even turn on the phone and you can't recover your phone (dead phone)
Soft-Brick - Software Bricked....Which means you can turn on the phone and do whatever to recover your phone
Click to expand...
Click to collapse
can we repair hard bricked phone

kotic said:
so it all started on trying to root with kingroot and as expected i got stuck in bootloop
and after that i was able to flash philz
but on flashing cm11 (changed updater script to kis3 and then i flashed) it didnt work and the contentiously booted into recovery (phliz)
then i went through xda and found it philz dont work
so
I flash twrp
and this time (the unedited script) its said status 7
i flashed Stock ROM still wont boot
basically im stuck with twrp installed
I tried restoring cwm backup as well
and I cant get nokia care suite to work
Click to expand...
Click to collapse
i hope not corupted emmc, i have this but with samsung ace 2.
it can bootup to recovery and bootloader but it wont install any ROM

Can't Boot Into System, Only TWRP

Here's the whole story:
I was on an unofficial build of RR CM13, encrypted, using TWRP 3.0.2-1.
I wiped data, dalvik, cache, and flashed the newest Official RR 7.1.1 and open-gapps.
I boot into the new ROM and start setting stuff up.
I restore some apps' data using Titanium Backup, then reboot.
On reboot I'm greeted with the device setup screen
I reboot, wipe, reflash a bunch of times
A few times:
When I rebooted after using the system my PIN doesn't decrypt the system/data (booting into the system)
When I rebooted after using TWRP my PIN does decrypt (booting into the system)
At some point during this I try wiping everything from TWRP, but it freezes, goes black, and then the notification LED turns white. I hold the power button and boot back to TWRP.
Apparently wiping /data is the problem (everything else wipes just fine if I do them individually)
I boot back into the system, set it up, and do a full factory reset from there (after offloading my stuff from Internal Storage)
Back to TWRP, now no matter what I flash or restore, I don't end up booting into the system, only into TWRP
I've also tried TWRP 3.0.4-0 (which wouldn't decrypt my data), and I've reflash TWRP a few times.
How do I actually boot into my system? It's been 7 hours, and I'm losing my mind.

Deleted

Boot to your ROM through the power button...
Manually..

Just Passing By said:
Not sure if you've tried this yet, but considering you've already backed your phone up, I'd just recommend to start clean and use the unbricker tool.
Click to expand...
Click to collapse
Do what he said. You've already wiped your internal storage, so just start from scratch.

Just Passing By said:
Not sure if you've tried this yet, but considering you've already backed your phone up, I'd just recommend to start clean and use the unbricker tool.
Click to expand...
Click to collapse
Thanks, that worked, but now when I try to boot into recovery I get a black screen.
I was able to use the Toolkit to boot into TWRP and flash my ROM. Any ideas how to fix this?

RustySpackleford said:
Thanks, that worked, but now when I try to boot into recovery I get a black screen.
I was able to use the Toolkit to boot into TWRP and flash my ROM. Any ideas how to fix this?
Click to expand...
Click to collapse
flash twrp
adb push os zip
adb push su
flash all , if needed format data.
This is what I have done yesterday,
edit: If u brick I don't take any responsibility.

Deleted

TWRP has enormous potential and so does ADB try to use them.
First ensure TWRP is working, If it works you're 80℅ safe , then further do some XDA search as per your need. I am sure it will work again.
This is purely my experience since 6 years I am flashing .

uttam.ace said:
TWRP has enormous potential and so does ADB try to use them.
First ensure TWRP is working, If it works you're 80℅ safe , then further do some XDA search as per your need. I am sure it will work again.
This is purely my experience since 6 years I am flashing .
Click to expand...
Click to collapse
hi bro, i facing 'white led black screen' on my 3T, can you explain what should i do for fix this?
please.. :crying:

bluuquthug said:
hi bro, i facing 'white led black screen' on my 3T, can you explain what should i do for fix this?
please.. :crying:
Click to expand...
Click to collapse
Hi ! Do not worry try this
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306

uttam.ace said:
Hi ! Do not worry try this
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Click to expand...
Click to collapse
it cant bro, i tried using that unbrick tool but still facing same problem after i update or flashing ROM again.
or can you explain step by step to fix that? almost all ROM i tried but still happening, am i wrong?

bluuquthug said:
it cant bro, i tried using that unbrick tool but still facing same problem after i update or flashing ROM again.
or can you explain step by step to fix that? almost all ROM i tried but still happening, am i wrong?
Click to expand...
Click to collapse
Your TWRP is working right!
go to TWRP/ Advanced/ADB Sideload
type "adb sideload /path/to/rom.zip"

Mate, recommend using ADB Sideload on TWRP itself is the only viable option you have. OR if that doesn't work and you still have the PIN issues, you should definitely use the Unbrick Tool and get everything back to Stock, and then reflash everything
Note: Using the unbrick tool will cause it to relock bootloader, so you're gonna have to start over again.
Cheers!