I need the help of you all,
I have a LG P880 here (LG Optimus 4X HD) version of the developer.
I tried to update it via KDZ updater, there was an error, and now the machine no longer starts the operating system. Just entering the S / W mode.
I would like the support of everyone so I can fix the problem by restoring the operating system of the device.
EnQeen said:
I need the help of you all,
I have a LG P880 here (LG Optimus 4X HD) version of the developer.
I tried to update it via KDZ updater, there was an error, and now the machine no longer starts the operating system. Just entering the S / W mode.
I would like the support of everyone so I can fix the problem by restoring the operating system of the device.
Click to expand...
Click to collapse
Search for the thread "roll back..." and flash with LGFlash Tool.
Sent from my LG-P880 using xda app-developers app
RuedasLocas said:
Search for the thread "roll back..." and flash with LGFlash Tool.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2179126&highlight=roll+back
I was trying to update firmware but it didint want to...
here soem examples
http://i.imgur.com/RvgJPbi.png
http://i.imgur.com/ayuKSNH.jpg
EnQeen said:
http://forum.xda-developers.com/showthread.php?t=2179126&highlight=roll+back
I was trying to update firmware but it didint want to...
here soem examples
http://i.imgur.com/RvgJPbi.png
http://i.imgur.com/ayuKSNH.jpg
Click to expand...
Click to collapse
It's unclear from your post, but if you think those are errors...they are not. What you show us is the normal output of using the program. You just need to wait until it finishes completely.
If you actually do get errors, it could be helpful to show us what they look like, although you could of course also just follow the instructions provided by the thread you link to rollback to a previous firmware version.
Wenque said:
It's unclear from your post, but if you think those are errors...they are not. What you show us is the normal output of using the program. You just need to wait until it finishes completely.
If you actually do get errors, it could be helpful to show us what they look like, although you could of course also just follow the instructions provided by the thread you link to rollback to a previous firmware version.
Click to expand...
Click to collapse
He's somehow stucked in SW mode. Reported that even pressing Vol+&power button (should get in "recovery mode") the device boot in SW...
Wierd
In SW mode, he should be able to use the flash program, KDZ_FW_UPD, LGFlash Tool or other...
Wenque said:
It's unclear from your post, but if you think those are errors...they are not. What you show us is the normal output of using the program. You just need to wait until it finishes completely.
If you actually do get errors, it could be helpful to show us what they look like, although you could of course also just follow the instructions provided by the thread you link to rollback to a previous firmware version.
Click to expand...
Click to collapse
I was trying po update my firmware and now my phone stocked in S\W mod
RuedasLocas said:
He's somehow stucked in SW mode. Reported that even pressing Vol+&power button (should get in "recovery mode") the device boot in SW...
Wierd
In SW mode, he should be able to use the flash program, KDZ_FW_UPD, LGFlash Tool or other...
Click to expand...
Click to collapse
Yes, I understand. That seems like a likely consequence of interrupting the flashing process, so I was wondering whether he panicked during the flash because of the output of the program and aborted. I mean, why else show us these screenshots?
I agree that he should just flash again to fix it, which should be possible.
Wenque said:
Yes, I understand. That seems like a likely consequence of interrupting the flashing process, so I was wondering whether he panicked during the flash because of the output of the program and aborted. I mean, why else show us these screenshots?
I agree that he should just flash again to fix it, which should be possible.
Click to expand...
Click to collapse
I was trying to install v10h and v20b . what i need to install again ?
EnQeen said:
I was trying to install v10h and v20b . what i need to install again ?
Click to expand...
Click to collapse
Before flashing which software version was on phone v20, or v10? or maybe custom rom? Or is like u said in first post your phone is developer edition aka "not for sale"
hpnxfox said:
Before flashing which software version was on phone v20, or v10? or maybe custom rom?
Click to expand...
Click to collapse
v10h(EUROPE)
EnQeen said:
v10h(EUROPE)
Click to expand...
Click to collapse
Did you tray with official LGmobile Support Tool with recovery phone option?
1. turn off phone, remove battery for few minutes
2. download lg flash tool from lg site, install it
3. in LGmobile Support Tool manually install drivers, need to click install drivers, select your model, wait to finish installation
4. with no battery in phone, hold volume- and in same time connect phone to pc, whait to pc recognize the phone and than put battery back to phone(if you get colored screen try with battery in phone and volume-)
5. in LGmobile Support Tool in Customer support menu select "phone recovery" and do what LGmobile Support Tool ask you to do
Than try to repeat flash procedure for v20h with kdz flasher
And if you using win7 try to use all flashing tool with administrator rights
---------- Post added at 02:14 PM ---------- Previous post was at 01:21 PM ----------
And if your phone is developer edition, i notice this in your first post "I have a LG P880 here (LG Optimus 4X HD) version of the developer" than read this : http://forum.xda-developers.com/showthread.php?t=1861942&highlight=developer+edition
hpnxfox said:
did you tray with official lgmobile support tool with recovery phone option?
1. Turn off phone, remove battery for few minutes
2. Download lg flash tool from lg site, install it
3. In lgmobile support tool manually install drivers, need to click install drivers, select your model, wait to finish installation
4. With no battery in phone, hold volume- and in same time connect phone to pc, whait to pc rezognize the phone and than put battery back to phone(if you get colored screen try with battery in phone and volume-)
5. In lgmobile support tool in customer support menu select "phone recovery" and do what lgmobile support tool ask you to do
than try to repeat flash procedure for v20h with kdz flasher
and if you using win7 try to use all flashing tool with administrator rights
Click to expand...
Click to collapse
thank you , i had some problems at the beginning but then i used another usb and now i have v20b <3
Hi.
I have a developer phone too.
LG do not offer suport to our phones.
The only way to solve that is flashing via LGFLASHTOOL.
Keep in mind that it will be solved. Keep it up and don't give up.
Sent from my MZ601 using xda premium
EnQeen said:
thank you , i had some problems at the beginning but then i used another usb and now i have v20b <3
Click to expand...
Click to collapse
Great, i'm glad!
EnQeen said:
thank you , i had some problems at the beginning but then i used another usb and now i have v20b <3
Click to expand...
Click to collapse
You mean that's everything OK now?
Hope soo...
I was about to test nvflash but, if its OK I don't need it
RuedasLocas said:
You mean that's everything OK now?
Hope soo...
I was about to test nvflash but, if its OK I don't need it
Click to expand...
Click to collapse
yes , everything is fine now .
Guys,
I think i have softbricked my phone. I connected my fone to LG tool for update and it downloaded the file and started the flashing. But the flashing has been on going for over 40 mins now and my phone has the "S/W Upgrade" screen and the LG tool is showing 1%. what should i do? PLS HELP.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
harshaldesai said:
Guys,
I think i have softbricked my phone. I connected my fone to LG tool for update and it downloaded the file and started the flashing. But the flashing has been on going for over 40 mins now and my phone has the "S/W Upgrade" screen and the LG tool is showing 1%. what should i do? PLS HELP.
View attachment 1875390
Click to expand...
Click to collapse
Disconnect and connect it , maybe it reassumes the upgrade.
If not, try other method.
If you want to save the downloaded kdz it should be in:
C:\ProgramData\LGMOBILEAX\Phone
You can use it on other method.
harshaldesai said:
Guys,
I think i have softbricked my phone. I connected my fone to LG tool for update and it downloaded the file and started the flashing. But the flashing has been on going for over 40 mins now and my phone has the "S/W Upgrade" screen and the LG tool is showing 1%. what should i do? PLS HELP.
View attachment 1875390
Click to expand...
Click to collapse
Someone said that stuck at 1% is probably because program can't extract kdz file and if thats true i'll assume either kdz corrupted or program is not running as administrator
So you can try to locate update tool folder and get properties of each exe there compatibility and check run as administrator, this might help
harshaldesai said:
Guys,
I think i have softbricked my phone. I connected my fone to LG tool for update and it downloaded the file and started the flashing. But the flashing has been on going for over 40 mins now and my phone has the "S/W Upgrade" screen and the LG tool is showing 1%. what should i do? PLS HELP.
View attachment 1875390
Click to expand...
Click to collapse
Man , use another USB port , i had this probelm too.
Related
I NO LONGER SUPPORT THIS THREAD ANYMORE. IF YOU WANT TO HIJACK THIS THREAD CONTACT ME.
SmartFlash Tool completly erases device memory during flashing.
Phone will make Factory Reset at first boot after flashing!
You can upgrade and downgrade. You can downgrade from V20N too!
This also will remove phone lock if you forget unlock code or pattern. (phone lock, NOT simlock or network lock...)
This method doesn't need internet connection.
If you want to flash an LG P970H download correct ROM from link below.
With this solution you can unbrick LG Optimus Black P970.
It fixes bootloop, "ERROR LG Security Team", and BSOD - blue screen with green writings (untested).
Only requirement is ability to enter in to S/W Update mode and not broken hardware.
Tested on: Windows 7 Ultimate x86, x64 and Windows XP Pro SP3.
---------------------------------------------------------------------------------------------------------------
Downloads:
- SmartFlash Tool (mirror) [password: [email protected]]
- stock ROM V10A EEU XXX with .bin & .fls. [CRC MD5: d880b8834400575b5827bafbf29a745e] - DepositFiles, FileServe, WUpload.
Other bin/fls ROMs are HERE. (All these links are working again!)
You need to install LG Mobile drivers. They are located HERE. [CRC MD5: e4614071e72c0292d3a8238908b5c7ba]
1. Unpack SFT.rar that contains SmartFlash Tool program.
2. Unpack, preffered C: drive, firmware pack BIN_LGP970AT-00-V10a-EEU-XXX-MAY-09-2011_0.zip
Inside there will be 2 files: LGP970AT-00-V10a-EEU-XXX-MAY-09-2011+0_AP.bin i LGP970AT-00-V10a-EEU-XXX-MAY-09-2011+0_CP.fls.
3. Run B_SmartFlashTool_Extern.exe
4. Choose:
1) ROM copy D/L bookmark
2) in Select mode choose Normal mode
3) choose CP file: LGP970AT-00-V10a-EEU-XXX-MAY-09-2011+0_CP.fls
4) choose AP file: LGP970AT-00-V10a-EEU-XXX-MAY-09-2011+0_AP.bin
*) connect phone in S/W Update mode with battery in it (on the phone that is switched off, plug in USB cable WHILE HOLDING Vol+ button)
5) choose COM port.
6) choose LGE Mobile USB Serial Port in Communication Driver
7) click Start and wait till end.
It takes about 3 mins to flash.
After successfully flashing, phone will reboot and make Factory Reset.
And that's all!
Settings:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing:
Finished:
Now your phone should be unbricked and working.
I will not take any responsibility if something goes wrong when you trying this solution. For me and many others it worked well.
To add, it is a fast flasher compared to RDTT.
gabwerkz said:
To add, it is a fast flasher compared to RDTT.
Click to expand...
Click to collapse
Exactly! It takes only 3 minutes to flash.
radkor said:
Exactly! It takes only 3 minutes to flash.
Click to expand...
Click to collapse
Don't you love that? Quick and easy... Thanks for the list link bro.
gabwerkz said:
Don't you love that? Quick and easy... Thanks for the list link bro.
Click to expand...
Click to collapse
AFAIK it's the safest & quickiest solution for flashing Black.
Now we only need newest firwares in bin/fls format, eg. V20N. Didn't find that yet.
radkor said:
AFAIK it's the safest & quickiest solution for flashing Black.
Now we only need newest firwares in bin/fls format, eg. V20N. Didn't find that yet.
Click to expand...
Click to collapse
Yeah, I used this one when I had BSOD way back. And I hope there'd be more. What I'd like to know is are they extracted or came from source? The method how to extract is interesting if they are.
I think that these firmwares "leaked" from LG or were downloaded from their servers.
I will ask the guy who posted these files.
I've downloaded all these firmwares on my HDD as a backup if hosting delete this.
It has approx 20GB.
Hello all expert,
Newbie here and want to be safe in uncharted territory on flashing my phone, never done it before.
Does the "COM Port" matter, how do we know which port# to use.
Thanks,
COM port is automatically assigned when usb is connected. I know in smart flasher, if you select lge mobile usb only one port will be available.
Redpik said:
COM port is automatically assigned when usb is connected. I know in smart flasher, if you select lge mobile usb only one port will be available.
Click to expand...
Click to collapse
Redpik,
Thanks for your quick reply, really appreciated.
Can we use this tool to install the cook rom REDY2006 put together V20N ROOTED.
I have V20N installed, unfortunately cannot get it to root. Thinking of installing REDY's rom.
fongnd said:
Can we use this tool to install the cook rom REDY2006 put together V20N ROOTED.
Click to expand...
Click to collapse
No.
It's only for stock LG ROMs in BIN/FLS format.
You guys has been awesome and informative.
My ultimate gold is to have V20N rooted. Need to get rid of all the bloatware.
I have the German V20N installed and could feel the efficiency in terms with responsiveness and battery compare to my previous V10D
Now.... to get to REDY's cook rom V20N that are rooted.
Do I use this tool to downgrade to my previous stock Rom V10D and have it rooted and install Rom Manager, then use the Recovery menu to install Redy's Rom
do I need to do any wipe before installing Redy's Rom
thank you guys!!
PS: All of these may be boring to the experts, but are very critical to beginners like me.
fongnd said:
Do I use this tool to downgrade to my previous stock Rom V10D and have it rooted and install Rom Manager, then use the Recovery menu to install Redy's Rom
Click to expand...
Click to collapse
Exactly. You can even use V10A provided in this tutorial or download yours V10D from list that I linked at the top.
fongnd said:
do I need to do any wipe before installing Redy's Rom
Click to expand...
Click to collapse
When you'll be rooted on V10x, run CWM, make full wipe (data, cache, (advanced) dalvik cache), and then install Redy's zipped ROM.
smart flash
Flashing to a stock room, will unlock the phone to any operator?
l0gandroid said:
Flashing to a stock room, will unlock the phone to any operator?
Click to expand...
Click to collapse
Nope.
Flashing, Rooting and Unlock-Phone are totally different things.
If your phone is locked to a operator, you need to enter the secret menu by pressing 3845#*970# then enter a unlock code from one of the sub-menu. The code above is assuming that your phone is a Optimus Black P970.
l0gandroid said:
Flashing to a stock room, will unlock the phone to any operator?
Click to expand...
Click to collapse
No. This method only unlock code or pattern used to lock phone, not SIM.
In short: this will not remove SIMLock.
fongnd said:
you need to enter the secret menu by pressing 3845#*970# then enter a unlock code from one of the sub-menu.
Click to expand...
Click to collapse
Nope, it's 2945#*970#
Thank you for this, is PERFECT!!!!!!!
HI radkor,
thanks for this tutorial. It is indeed way faster than KDZU or RD. However it doesn't work on my phone. Tried several times (KDZU and RD do not work either).
Phone gets in s/w mode. Tool starts to flash. Shows no errors and phone restarts. Yet it stucks with LG Logo and buttons flashing. Stays like this for hours. I tried several times and also used KDZU and RD with several KDZ-Versions and changing options.
It is strange to me that all the programs tell me that the phone is flashed and the phone restarts, but still gets stuck with LG Logo.
Have you seen this? Or should the Tool definitely work?
THX
Ekkkke
@Ekkkke:
This flashing tool works if phone is 100% hardware OK.
Maybe your phone hardware is faulty...
Did phone made a Factory Reset after flashing while rebooting?
Why it is bricked? You tried to flash wrong firmware or what?
thanks for answering! I rooted the phone once but I did not flash anything. Made one official upgrade a few weeks ago. Then I turned off the phone a few days ago. Now it doesn't start. Always gets stuck with LG Logo and buttons flashing.
When using the tool to flash it the S/W screen disappears, phone seems to reboot but gets stuck again with LG Logo. The tool tells me that everything is complete. How can I see if it makes a factory reset?
Probably you are right and the hardware is broken. I may use the LG Tool to flash official V20N with recovers (that program as well tells me everything went right). Then I probably send it to LG.
This Forum was my last hope. Thanks for helping! And the tool is great and fast anyway!
Hey guys,
I've managed to devise a method to inject the CWM recovery image into the LG Update tool during updating with a kdz.
The basic idea is explained in this post. I took it a bit further. During the updating process, you can replace the recovery image inside the updater's memory. Basically, you can use this method on any LG Updating tool. This guide uses KDZ Updater. The method is great for getting the latest firmware for your region and still get it rooted.
This procedure requires some quick actions in order to succeed. Read through it before attempting to flash. I'm not responsible for anything that might happen in the result of using this guide.
Needed files:
CWMInject
UPK
Latest CWM recovery image for P970
Cheat Engine
1. Run KDZ Updater from UPK with Windows Enabler on.
Select your KDZ file.
2. Run CWMInject with Admin privileges. Select KDZU process. Set CWM image to the recovery image file.
3. Run Cheat Engine. Select KDZU process. Change Value Type to Text and write ANDROID! in the search field.
4. Open Task Manager, go to Processes and sort processes by memory.
5. In KDZ Updater, press Launch software update.
6. Keep an eye on the KDZU process in Task Manager, if it starts growing, it means it has started to load the files into memory and you can move to the next step.
7. In Cheat Engine, press First Scan. If it doesn't find anything, you did this too early. It should find 3 addresses. The last one is what you need.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8. Copy the found address to CWMInject and press Write Memory. This needs to be done as quickly as possible from the time of finding the addresses.
9. Finish flashing.
Now your phone has CWM recovery installed. You can get into it with "adb reboot recovery". You need the Android SDK for that.
To root your phone, put this Superuser.zip on your SD card and use CWM to flash it.
You don't necessarily have to use KDZ Update. I tried this method with R&D Test Tool and the regular LG Mobile software update. You just need the right process name for CWMInject and Cheat Engine.
That is excellent man. Bin files? Nobody need it anyway. Lol. Profit!
Sent from my LG-P970 using XDA App
Updated the first post with the guide. Cheers
Confirmed, working with V20F from Orange Romania, using R&D Tool.
CWMInject.exe needs to be run as administrator, in case you're using Win as a non-privileged user.
As an interesting sidenote, I forgot to do a factory reset before (coming from Zeus v4.01b), so I got a bootloop. Easy way to get rid of that: flash a V10 based firmware, it won't recognize the ext4 data partition -> no bootloop. Did a factory reset from there, then repeated the flashing for V20F. Worked like a charm.
Amazing!!!!!!
Awesome! With R&D... the process is "LGUserCSTool". After flashing it boots directly to CWM.
CSE Web upgrade test: (Small server)(for a factory reset)
Flashed V20N with R&D.
It works like a charm. Thank you very much.
Great to see it working for everybody!
If you're feeling adventurous, you can test my updated CWMInject. It has a built in memory scanner, so you can just press Start after you've started updating.
Edit:
Oh yeah, it requires .Net Framework 4 now...
roltzy said:
Great to see it working for everybody!
If you're feeling adventurous, you can test my updated CWMInject. It has a built in memory scanner, so you can just press Start after you've started updating.
Edit:
Oh yeah, it requires .Net Framework 4 now...
Click to expand...
Click to collapse
Very nice. I guess the Cheat Engine is no more required.
ETA: maybe it would be a good idea to specify in the manifest that it requires admin privileges.
Yeah, good idea.
I guess not everybody disables UAC as the first thing after installing Windows
gabwerkz said:
Awesome! With R&D... the process is "LGUserCSTool". After flashing it boots directly to CWM.
CSE Web upgrade test: (Small server)(for a factory reset)
Click to expand...
Click to collapse
I have a Question!... When is the best moment to aply CWMInject?? i want to use R&
__________________________
i solve the question, really works so great!!!
I've usually applied it around the 10% mark, so it gets done at 16% or so. It's worked every time, for all the updating software, since the underlying flashing process seems to be the same for each one.
Yeah, it works very well and together with this trick http://forum.xda-developers.com/showthread.php?t=1473781 you can now flash KDZ if it is not for your region.
Didnt work with V20B_00.kdz for India
I did everything as stated in the first post. The Memory of recovery-clockwork-touch-5.8.1.3-p970 was also injected successfully within 10% of flashing. And phone rebooted with new the rom. However, I am not able to get into the CWM. I tried the vol+ hard key while booting, but CWM is not coming. Help!
advptg said:
I did everything as stated in the first post. The Memory of recovery-clockwork-touch-5.8.1.3-p970 was also injected successfully within 10% of flashing. And phone rebooted with new the rom. However, I am not able to get into the CWM. I tried the vol+ hard key while booting, but CWM is not coming. Help!
Click to expand...
Click to collapse
roltzy said:
Hey guys ...
Now your phone has CWM recovery installed. You can get into it with "adb reboot recovery". You need the Android SDK for that...
Click to expand...
Click to collapse
for short messages
What is this for?
What is this Android SKD? how is such injection of CWM useful?
It is simple. With CWM injection you can root every KDZ. And with KDZ firmware update fix, you can use R&D Tool and flash KDZ to your phone.
Nice thread.. My sister just got an optimus black, ( And i want to root it) does this method should be with the phone on download mode or what ??
Not very familiar with the way optimus root process is done. I own a GS2
EDIT: Well I did with the phone ON, and USB debug mode ON,/ OFF, also have tried doing [Remove battery,sim,SD] hit vol up and inert the usb cable to enter in download mode.. But always when I click Launch Software Update when it starts to decompress the KDZ file it just got frozen, and (Not Responding)
Any clue ? I´m trying to root a v20a (mexican) version.
Thanks.
I can't open CWMInject, I'm on Windows XP...
not what I did wrong, now my phone does not start this brick
Flashing stock ROM on LG L Fino
Since the device is pretty new and there is no other such guide for the Fino I decided to make one.
Flashing stock firmware on LG devices is universal (for the most part) so this guide will be pretty straight up.
This guide should be compatible with both the Dual Sim Fino and the regular one and all variants between them N/F/G etc.
I will try to make this as noob friendly as possible.
Click to expand...
Click to collapse
__________________
Flashing a stock ROM:
Can unbrick the device (only if softbricked)
Will remove root
Can Wipe user data
Can brick device (If done incorrectly)
__________________
STEPS:
STEP 1: Download and Install the LG DRIVER from here.
You might want to restart your computer after driver installation.
STEP 2: Download LG FLASH TOOL 2014 from here and extract it IN a NEW folder somewhere.
STEP 3: Download a KDZ firmware file from here
BE SURE YOU ARE DOWNLOADING THE RIGHT FIRMWARE FOR YOUR DEVICE (D290N, D295 and so on) OTHERWISE YOUR DEVICE MIGHT BECOME A HARD BRICK!!! LOOK FOR THE DEVICE MODEL BEHIND THE BATTERY!
Click to expand...
Click to collapse
STEP 4: Extract the FIRMWARE.KDZ file IN the same folder as the LG FLASHTOOL 2014.
STEP 5: Enter DOWNLOAD MODE on the device. You can do that by connecting a USB cable to the computer and then pressing and holding the VOLUME UP button while inserting the USB in to the phone.
STEP 6: Start LGFlashTool2014.exe. You should have something like this open:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STEP 7: In type ALLWAYS choose CDMA.
STEP 8: IN KDZ browse to the KDZ file you extracted earlier and select it.
STEP 9: Select Normal or CSE Flash
Normal Flash: Flash the ROM on top of the current one ( Good for updating firmware)
CSE Flash: Flash the ROM after WIPING EVERYTHING. (Good if testing new ROM or restoring a brick)
Click to expand...
Click to collapse
STEP 10: After selecting either you will be transferred to another screen with data on it. Don't edit anything and just click START
STEP 11: After that you will be yet again transferred to another screen like this:
Dont change or tick anything and just click OK
STEO 12: After that the process of FLASHING will begin.
THIS PROCESS CAN'T BE STOPPED SO BE SURE YOU HAVE EVERYTHING NEEDED TO WAIT FOR 5-20 MINUTES FOR IT TO COMPLETE.
DO NOT UNPLUG THE DEVICE UNTIL IT HAS FULLY BOOTED!
Click to expand...
Click to collapse
If you get an error saying something about failed downloads and whatnot DO NOT CLICK ON ANYTHING! and wait about 15 minutes. The program might just display these errors but the process will continue.
Do not worry if the program says disconnected or crashes at the end of the procedure. This is normal
STEP 13: Enjoy your reflashed device
__________________
By following this guide you agree that I TAKE NO RESPONSIBILITY FOR BRICKED OR DAMAGED DEVICES.
You and only you decided to follow these instructions.
Click to expand...
Click to collapse
Download the KDZ you need here: https://lg-firmwares.com/
johnwilliam_a_k_a_trash said:
Nice tutorial!
Click to expand...
Click to collapse
Thanks
Glad to help.
Does anyone experimented issues installing drivers? I've installed several versions and it still not detecting/recognizing the device and searching for drivers in windows update. (Windows7, D290n).
---------- Post added at 12:36 PM ---------- Previous post was at 12:05 PM ----------
carmeloamg said:
Does anyone experimented issues installing drivers? I've installed several versions and it still not detecting/recognizing the device and searching for drivers in windows update. (Windows7, D290n).
Click to expand...
Click to collapse
SOLVED: After disabling windows update, uninstalling every single driver version for the device, unplugging network connection and reinstalling drivers (4.0.3) it worked. Thanks and hope help if it is your case.
Ok so i tried to flash kdz file but on 60% it say "The phone is disconnected from PC" What should i do?
cyber808 said:
Ok so i tried to flash kdz file but on 60% it say "The phone is disconnected from PC" What should i do?
Click to expand...
Click to collapse
You can start over... But this time check that the USB connection is stable and the drivers are all updated
Lg l fino hardbricked!
Hi! i'm a newbie here, can you teach me to unbrick a hardbricked lg l fino? no download mode and it says boot security error, it has been days solving this problem ...
micoevil said:
Hi! i'm a newbie here, can you teach me to unbrick a hardbricked lg l fino? no download mode and it says boot security error, it has been days solving this problem ...
Click to expand...
Click to collapse
Deppends if it really is hard bricked. Can you enter download mode?
meganukebmp said:
STEP 5: Enter DOWNLOAD MODE on the device. You can do that by connecting a USB cable to the computer and then pressing and holding the VOLUME DOWN button while inserting the USB in to the phone.
__________________
Click to expand...
Click to collapse
I have LG L Fino D295. I cannot enter to Download Mode as there is error message "error boot certification verify" and then the device goes black. By removing the battery, put it back and press power button the phone goes normally. Any solution for cannot entering the Download Mode?
I found this thread: http://forum.xda-developers.com/showthread.php?t=2582142 but I couldn't find the files needed (sbl1.img, aboot.img, rpm.img, tz.img) which I assume the stock files for LG Fino L D295. And not really sure this will help me to enter the Download Mode.
Just as background: when I update the firmware via OTA, the system says that my phone is suspected to be rooted. since then my camera is not working. Clear cache and data didn't help.
Any suggestion would be appreciated.
thenks bro
Hello, I have a problem because after installing TWRP on Lg l'fino from time changed the android I changed not at all aboot on orginale and call me zbrickował
I wanted to install in new home Stock for lg flash tool because tele enters into download mode but as it starts to upload new stock becomes 2% percent and pops it failed Tele. 100% charged and detectable packages for Windows
Could anyone help ?? Thanks in advance: D
My English is poor
rohanekpl said:
Hello, I have a problem because after installing TWRP on Lg l'fino from time changed the android I changed not at all aboot on orginale and call me zbrickował
I wanted to install in new home Stock for lg flash tool because tele enters into download mode but as it starts to upload new stock becomes 2% percent and pops it failed Tele. 100% charged and detectable packages for Windows
Could anyone help ?? Thanks in advance: D
My English is poor
Click to expand...
Click to collapse
Try reinstalling LG driver and try plugging in another USB port on your PC.
So I tried to do some driver version I installed, each USB port podłanczałem and all the time is this problrm on your computer is at 2% and continue on your 0% and nothing happens, I wanted to also add that when I turn on the tele. normally it shows the logo lg and the phone vibrates at some time after 2 times,Lg phone detects a mobile phone but the phone installs the first time you connect it does not want to load up to the end,
maybe this is the problem that you have Windows 10 ?? Maybe it is going to change a recovery program ?? and not by the emulator
---------- Post added at 02:49 PM ---------- Previous post was at 02:27 PM ----------
proudlytm said:
Try reinstalling LG driver and try plugging in another USB port on your PC.
Click to expand...
Click to collapse
So I tried to do some driver version I installed, each USB port podłanczałem and all the time is this problrm on your computer is at 2% and continue on your 0% and nothing happens, I wanted to also add that when I turn on the tele. normally it shows the logo lg and the phone vibrates at some time after 2 times,Lg phone detects a mobile phone but the phone installs the first time you connect it does not want to load up to the end,
maybe this is the problem that you have Windows 10 ?? Maybe it is going to change a recovery program ?? and not by the emulator
I flashed my d290g with a d295 firmware to install a rom on it. Now I'm trying to flash the original firmware with the flash tool but I can't manage to flash it, I've tried adding the d290 unlocked bootloader but it's still not flashing. Is there anyway to force the flash tool to install the firmware without checking the model of it or to make a flasheable zip for TWRP with the d290g firmware?
LG L Fino Hard Bricked
Hi. Sorry for me english.
I have LG L Fino (D290N) and me phone hard bricked. when I instal TWPR with aboot.img and rashr application me phone reboot and I have purple screen with DBI Apps Watchdog Reset or black screen all time. No have logo LG, only black screen. No have download mode, recovery mode, fastboot mode. Cant reperair with LG Support tool because have error with me baterry not full charging.
What I must doo to unbricked my phone ? Please help me
To everyone that has hard bricked their phone:
There is no fix of hard bricked LG L Fino we are aware of as of now!
The only way out is to give your phone to warranty service and get it replaced or get its motherboard replaced!
Please, note that you should be very careful when typing these two commands, installing aboot and recovery!
You are doing this at your own risk!
D290 firmware link dead.. File not found... Please post another mirror link.. I need this firmware urgent.... D290
Abdul.wahid9001 said:
D290 firmware link dead.. File not found... Please post another mirror link.. I need this firmware urgent.... D290
Click to expand...
Click to collapse
Links are not dead. Just download for another region.
i can'tf find custom ROM for this device. How did you found?
Hiparci said:
i can'tf find custom ROM for this device. How did you found?
Click to expand...
Click to collapse
Me and my friends made it.
Hello everybody please help me. I tried to Root my phone I unlocked the phone while getting help from “dreambo” then I unlocked the phone and download twrp recovery then when I tried to start phone it only showed me recovery menu sistem was not opening then tried to chech “dreambo” again then i saw a picture (picture 1) there I wrote “fastboot flash recovery boot.alpha.x.img” instead of “fastboot flash boot boot.alpha.x.img” and now phones recovery didnt open and become bootloop it shows logo then turn off (video 1) then i cant able to to put phone into “bootloader mode” . I know this phone doesn’t have stock rom how can i fix this phone ?
dreambo Thread: Root and TWRP 3.2.1 for Maze Alpha X 6/64
(picture 1)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(video 1)
video link: https://youtu.be/QYMCOQiExMg
Originally Posted
dreambo said:
I am almost sure that you have flashed the recovery image in the boot partition !
You have do that fastboot flash boot recovery.img instead of fastboot flash recovery recovery.img
To have your phone working, just flash the attached boot.img : fastboot flash boot boot.alpha.x.img
Click to expand...
Click to collapse
Edit: Way to solve Problem:
Stive very thanks to my friend after a long time I fixed the phone. In order to do UNBRICK phone download this from link and than put phone into charge than connect phone to computer with usb and open "Flash tool" program than add “MT6757_Android_scatterr.txt” file than put it “Frimware Upgrade” than download and wait until it finished.
Stive87 said:
Unbrick Maze Alpha X 6/64GB only phone is black screen and phone is total brick (format all partition).
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view
Rom is no official :
System : official rom for Maze Alpha B6/64GB . (! no update after - OTA !!),
boot, logo and recovery is normal (copy from original my phone).
Good luck.
Sorry for bad english, my french ^^
Click to expand...
Click to collapse
Stive87 said:
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view?usp=drivesdk
full rom V03 6/64GB Rom Ofifcial Stock
https://drive.google.com/file/d/1WjXKj8abnghy_OjfUW5TYkAppjWg0amH/view?usp=sharing
Click to expand...
Click to collapse
Thanks to everyone who helped!!
help please
rafaello21 said:
help please
Click to expand...
Click to collapse
Became interested in this phone since I found a 6/128 model for 160$. If fastboot is failing (maybe because of the different partition size?) I'd go with SPFlashTool: if I remember well phone only need to be swithed off when you start downloading the image, therefore it goes well with bootloping if you choose the right moment
matteo.de-leo said:
Became interested in this phone since I found a 6/128 model for 160$. If fastboot is failing (maybe because of the different partition size?) I'd go with SPFlashTool: if I remember well phone only need to be swithed off when you start downloading the image, therefore it goes well with bootloping if you choose the right moment
Click to expand...
Click to collapse
I bought it 170$ when it was on discount no matter what i do “bootloader mode” not works because of the error that i did and no one helps
rafaello21 said:
I bought it 170$ when it was on discount no matter what i do “bootloader mode” not works because of the error that i did and no one helps
Click to expand...
Click to collapse
That's exactly what I'm saying: SPFlashTool doesn't require your phone to be in fastboot mode, only to be switched of when you plug it in. I had the same problem with an Archos Sense 55S after treying to root it. I wasn't able to enter neither fastboot or recovery mode, therefore I flashed the stock rom with SPFT
matteo.de-leo said:
That's exactly what I'm saying: SPFlashTool doesn't require your phone to be in fastboot mode, only to be switched of when you plug it in. I had the same problem with an Archos Sense 55S after treying to root it. I wasn't able to enter neither fastboot or recovery mode, therefore I flashed the stock rom with SPFT
Click to expand...
Click to collapse
I would do it if i have Stock rom ? i am very disappointed because of bought this phone how is it possible that phone doesnt have stock rom is there any possibility to fix this without stock rom?
rafaello21 said:
I would do it if i have Stock rom i am very disappointed because of bought this phone how is it possible that phone doesnt have stock rom is there any possibility to fix this without stock rom?
Click to expand...
Click to collapse
Which model are you using, the 6/64 or the 6/128?
For the former you can use a TWRP Backup done by @dreambo in order to restore at least the boot and and recovery partition
https://forum.xda-developers.com/maze-alpha/development/recovery-twrp-3-2-1-maze-alpha-x-t3740575
while for the latter a link in this post (https://forum.xda-developers.com/maze-alpha/development/original-rom-t3720714) is given ( eventually as soon as my phone arrives I can dump the image):
Option 1) https://drive.google.com/drive/folde...ZyDQFgygsdkei2
Option 2) http://bit.ly/2GKcmYe
matteo.de-leo said:
Which model are you using, the 6/64 or the 6/128?
For the former you can use a TWRP Backup done by @dreambo in order to restore at least the boot and and recovery partition
https://forum.xda-developers.com/maze-alpha/development/recovery-twrp-3-2-1-maze-alpha-x-t3740575
while for the latter a link in this post (https://forum.xda-developers.com/maze-alpha/development/original-rom-t3720714) is given ( eventually as soon as my phone arrives I can dump the image):
Option 1) https://drive.google.com/drive/folde...ZyDQFgygsdkei2
Option 2) http://bit.ly/2GKcmYe
Click to expand...
Click to collapse
Hi, can i use this to restore my phone? And do you know how? I did a search in the web but didn't fin any solution.
ttl1982 said:
Hi, can i use this to restore my phone? And do you know how? I did a search in the web but didn't fin any solution.
Click to expand...
Click to collapse
Hi ttl1982, before giving an answer I should know what are we talking about. Is it the same phone? And which version? What is the current situation (bootlooping into TWRP, bootlooping into Android)? Even assuming we're still talking about the Maze Alpha X, there are still too much variables!
matteo.de-leo said:
Which model are you using, the 6/64 or the 6/128?
For the former you can use a TWRP Backup done by @dreambo in order to restore at least the boot and and recovery partition
https://forum.xda-developers.com/maze-alpha/development/recovery-twrp-3-2-1-maze-alpha-x-t3740575
while for the latter a link in this post (https://forum.xda-developers.com/maze-alpha/development/original-rom-t3720714) is given ( eventually as soon as my phone arrives I can dump the image):
Option 1) https://drive.google.com/drive/folde...ZyDQFgygsdkei2
Option 2) http://bit.ly/2GKcmYe
Click to expand...
Click to collapse
I have Maze Alpha X 6/64 model. If “bootloader mode” doesnt open how can i install ‘twrp’ ? About Thread article i read everything but my only problem is my phone dont open “bootloader mode”. And only solution is stock rom i think than you need SPFlashTool to install it. Maybe you know better than me how can i install “twrp” without opening “bootloader mode” ? I wrote above why this happened.
I click Power and Vol+ buttons as i show in the video phone turn of but doesn’t open “bootloader mode”
rafaello21 said:
I have Maze Alpha X 6/64 model. If “bootloader mode” doesnt open how can i install ‘twrp’ ? About Thread article i read everything but my only problem is my phone dont open “bootloader mode”. And only solution is stock rom i think than you need SPFlashTool to install it. Maybe you know better than me how can i install “twrp” without opening “bootloader mode” ? I wrote above why this happened.
I click Power and Vol+ buttons as i show in the video phone turn of but doesn’t open “bootloader mode”
Click to expand...
Click to collapse
No, even in the case you just want to boot into TWRP (and be able to use one of the backups provided in that post) you need to access fastboot mode. during bootlooping does your PC find the device with the "adb devices" command (namely, as soon as your phone boots up you'd spam this command via terminal)?
matteo.de-leo said:
Hi ttl1982, before giving an answer I should know what are we talking about. Is it the same phone? And which version? What is the current situation (bootlooping into TWRP, bootlooping into Android)? Even assuming we're still talking about the Maze Alpha X, there are still too much variables!
Click to expand...
Click to collapse
Hi, Thanks for your quick response. I will share some more info like you asked.
- Phone: Maze Alpha X
- Version: 6GB RAM/128GB Storage
- Current situation: It won't start at all (when connected to Windows PC i get the 'USB device not recognized' error, so it does see something)
My idea is the following:
- Install recovery with SPK flashtool
- Restore with backup (i have this from another thread) or the system dump.
The above does not work because i do not have the correct preloader file (so SPK flash tool does recognize the phone?).
ADB is not recognizing the phone, so it can't be done that way (as far as my knowledge goes).
I asked Maze several times to provide me the original rom but i get zero response, no matter on what channel i ask them.
matteo.de-leo said:
No, even in the case you just want to boot into TWRP (and be able to use one of the backups provided in that post) you need to access fastboot mode. during bootlooping does your PC find the device with the "adb devices" command (namely, as soon as your phone boots up you'd spam this command via terminal)?
Click to expand...
Click to collapse
I will try but phone turn off and one very quick. Is 1-2 seconds enough for doing what you are saying ? Twrp flash i have to do ? Is there any phone and have similar problem like this ? Can help with help of Video ? And i will try what you said and back to you thanks
ttl1982 said:
Hi, Thanks for your quick response. I will share some more info like you asked.
- Phone: Maze Alpha X
- Version: 6GB RAM/128GB Storage
- Current situation: It won't start at all (when connected to Windows PC i get the 'USB device not recognized' error, so it does see something)
I got this phone from my nephew. He broke it because he flashed the Maze Alpha (not X) 4GB RAM/64GB storage rom on it because he had TWRP bootloops.
My idea is the following:
- Install recovery with SPK flashtool
- Restore with backup (i have this from another thread) or the system dump.
The above does not work because i do not have the correct preloader file (so SPK flash tool does recognize the phone?).
ADB is not recognizing the phone, so it can't be done that way (as far as my knowledge goes).
I asked Maze several times to provide me the original rom but i get zero response, no matter on what channel i ask them.
Click to expand...
Click to collapse
I also wrote them several times about stock rom but they didn’t answer me i think company only think about money. Do we have to throw our phone to garbage because of one wrong thing ? What should i do ?
ttl1982 said:
My idea is the following:
- Install recovery with SPK flashtool
- Restore with backup (i have this from another thread) or the system dump.
Click to expand...
Click to collapse
Yes I was thinking the same. Eventually you do not need to install the recovery, restoring the bootloader should be enough: if the bootloader is already unlocked you can just boot into TWRP and from there restoring the backup previously copied into a SD card.
The above does not work because i do not have the correct preloader file (so SPK flash tool does recognize the phone?).
Click to expand...
Click to collapse
Why do you say you don't have the right one? Did SPFlashTool return you some error?
I asked Maze several times to provide me the original rom but i get zero response, no matter on what channel i ask them.
Click to expand...
Click to collapse
Well AFAIK Maze is completely done, no surprise if they do not answer. I'm reasonably sure that there's a way to dump these files from a working phone, if I'm right I'll try with mine
matteo.de-leo said:
No, even in the case you just want to boot into TWRP (and be able to use one of the backups provided in that post) you need to access fastboot mode. during bootlooping does your PC find the device with the "adb devices" command (namely, as soon as your phone boots up you'd spam this command via terminal)?
Click to expand...
Click to collapse
I tried when I click Power and Vol+ it does bootloop.But the only way to put phone into “bootloader mode” you need SPFlashTool. I dont know what can i do now. When phone was bootlooping i wrote several times “adb devices” but nothing happened
matteo.de-leo said:
Yes I was thinking the same. Eventually you do not need to install the recovery, restoring the bootloader should be enough: if the bootloader is already unlocked you can just boot into TWRP and from there restoring the backup previously copied into a SD card.
I will try this, maybe that works.
Why do you say you don't have the right one? Did SPFlashTool return you some error?
Yes, it says 'status preloader invalid'
Well AFAIK Maze is completely done, no surprise if they do not answer. I'm reasonably sure that there's a way to dump these files from a working phone, if I'm right I'll try with mine
Click to expand...
Click to collapse
That explains a lot. But it is still not acceptable to answer no one imo
---------- Post added at 10:48 PM ---------- Previous post was at 10:34 PM ----------
matteo.de-leo said:
Yes I was thinking the same. Eventually you do not need to install the recovery, restoring the bootloader should be enough: if the bootloader is already unlocked you can just boot into TWRP and from there restoring the backup previously copied into a SD card.
Why do you say you don't have the right one? Did SPFlashTool return you some error?
Well AFAIK Maze is completely done, no surprise if they do not answer. I'm reasonably sure that there's a way to dump these files from a working phone, if I'm right I'll try with mine
Click to expand...
Click to collapse
ttl1982 said:
That explains a lot. But it is still not acceptable to answer no one imo
Click to expand...
Click to collapse
I now get another error when flashing boot.img:
ERROR: STATUS_BROM_CMD_STARTCMD_FAIL
ttl1982 said:
ERROR: STATUS_BROM_CMD_STARTCMD_FAIL
Click to expand...
Click to collapse
As reported by another user on this website: https://forum.hovatek.com/thread-21351.html
The device attempted to power on before SP flash tool could flash files to it
Click to expand...
Click to collapse
Phone must be plugged (while switched off) to the USB port after having given the Download order to SP
---------- Post added at 09:38 PM ---------- Previous post was at 09:34 PM ----------
By the way, it seems that this very website (in particular here https://forum.hovatek.com/thread-468.html) hosts a guide to dump a Mediatek firmware SPFlashTool compatible, together with the necessary files, but guess what? You need to register in order to download them, something that I'll definitely do if it just lets me
ttl1982 said:
I now get another error when flashing boot.img:
Click to expand...
Click to collapse
Which boot.img you chose ?
matteo.de-leo said:
Phone must be plugged (while switched off) to the USB port after having given the Download order to SP
Click to expand...
Click to collapse
What should i do exactly to use SPFlashTool ? What alternative ? When I connect my phone to pc it turn off turn on then power volume + and - buttons randomly and than turn on turn off stoped now it looks like this in the picture . Than i checked “adb devices” it says “waiting for devices”. The thing that “dreambo” shared “boot.alpha.x.img” and can i adjust this with SPFlashTool and install it ?
rafaello21 said:
Which boot.img you chose ?
What should i do exactly to use SPFlashTool ? What alternative ? When I connect my phone to pc it turn off turn on then power volume + and - buttons randomly and than turn on turn off stoped now it looks like this in the picture . Than i checked “adb devices” it says “waiting for devices”. The thing that “dreambo” shared “boot.alpha.x.img” and can i adjust this with SPFlashTool and install it ?
View attachment 4518023
Click to expand...
Click to collapse
I have used the exact same boot.img as you did.
Hi all, dumbass me was so excited to get a new phone, I went around Redmi Note 10 ROMs on my Note 10 5G and bricked it... It won't boot into fastboot or recovery. When I boot it up holding the up/power buttons, the screen lights up and phone gets briefly recognized by my computer before rebooting. I've done some digging around and tried to find edl point? of this phone but couldn't get far. Any help would be appreciated!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
assistance... you have lost warranty. anyway you can try this metod (work with my old mia3 but have a qualcomm chipset)
first: CLOSE YOUR PHONE!
install mi pro flash tool https://www.androidfilehost.com/?fid=14943124697586360238
PRESS power+ vol up+vold -
connet to pc via USB
OPEN MIflash tool pro
if your phone will be recognized you can flash stock firmware
with miflash pro you can install all drivers you need (but i'm not sure, test by yourself)
good luck.
if this procedure don't work go to an assistance point. you have damaged the bootloader
before mod devices with a/b partitions is very important read guides with attention. if you don't want trash a new device
you can also try sp flash tool, specific for mtk devices
How-to flash or install Stock ROM (Firmware) using SP Flash Tool
Step-by-Step guidelines to flash or install Stock ROM (Scatter Firmware) on Mediatek devices using the SP Flash Tool.
androidmtk.com
tannedcan said:
Hi all, dumbass me was so excited to get a new phone, I went around Redmi Note 10 ROMs on my Note 10 5G and bricked it... It won't boot into fastboot or recovery. When I boot it up holding the up/power buttons, the screen lights up and phone gets briefly recognized by my computer before rebooting. I've done some digging around and tried to find edl point? of this phone but couldn't get far. Any help would be appreciated! View attachment 5431881
Click to expand...
Click to collapse
did you even open it? tannedcan in every single post where there are instructions how to root/unlock/change rom
there is a DISCLAIMER for a reason.
that msg remark that you can brick your device if you dont know what you are doing or if you have doubts!
most of times things can be recovered but NEVER open a device in warranty.
simika said:
did you even open it? tannedcan in every single post where there are instructions how to root/unlock/change rom
there is a DISCLAIMER for a reason.
that msg remark that you can brick your device if you dont know what you are doing or if you have doubts!
most of times things can be recovered but NEVER open a device in warranty.
Click to expand...
Click to collapse
yes, i'm 100% agree with you
tannedcan said:
Hi all, dumbass me was so excited to get a new phone, I went around Redmi Note 10 ROMs on my Note 10 5G and bricked it... It won't boot into fastboot or recovery. When I boot it up holding the up/power buttons, the screen lights up and phone gets briefly recognized by my computer before rebooting. I've done some digging around and tried to find edl point? of this phone but couldn't get far. Any help would be appreciated! View attachment 5431881
Click to expand...
Click to collapse
I was exactly in same trouble, use This guide that solve the issue.
How to flash an MTK secure boot device without a custom DAThis is a step by step guide showing how to flash a Mediatek (MTK) secure boot device without using a custom download agent (DA). A little history Secure Boot M
forum.hovatek.com
Press mobile three buttons and connect cable to pc (use USB 2.0) to enter BROM mode (are like ERL mode in Snapdragon models). Because mtk models don't have test point. So don't need to disarm mobile.
Did you find the solution?
please any solution? i am into same problem. need stock rom for
Redmi Note 10 5G choppin
Zaiserr2 said:
I was exactly in same trouble, use This guide that solve the issue.
How to flash an MTK secure boot device without a custom DAThis is a step by step guide showing how to flash a Mediatek (MTK) secure boot device without using a custom download agent (DA). A little history Secure Boot M
forum.hovatek.com
Press mobile three buttons and connect cable to pc (use USB 2.0) to enter BROM mode (are like ERL mode in Snapdragon models). Because mtk models don't have test point. So don't need to disarm mobile.
Click to expand...
Click to collapse
this really helped, thanks but only with usb 3.0
tannedcan said:
Hi all, dumbass me was so excited to get a new phone, I went around Redmi Note 10 ROMs on my Note 10 5G and bricked it... It won't boot into fastboot or recovery. When I boot it up holding the up/power buttons, the screen lights up and phone gets briefly recognized by my computer before rebooting. I've done some digging around and tried to find edl point? of this phone but couldn't get far. Any help would be appreciated! View attachment 5431881
Click to expand...
Click to collapse
same issue sir my device show handshake failed during flashing
wetito said:
assistance... you have lost warranty. anyway you can try this metod (work with my old mia3 but have a qualcomm chipset)
first: CLOSE YOUR PHONE!
install mi pro flash tool https://www.androidfilehost.com/?fid=14943124697586360238
PRESS power+ vol up+vold -
connet to pc via USB
OPEN MIflash tool pro
if your phone will be recognized you can flash stock firmware
with miflash pro you can install all drivers you need (but i'm not sure, test by yourself)
good luck.
if this procedure don't work go to an assistance point. you have damaged the bootloader
before mod devices with a/b partitions is very important read guides with attention. if you don't want trash a new device
you can also try sp flash tool, specific for mtk devices
How-to flash or install Stock ROM (Firmware) using SP Flash Tool
Step-by-Step guidelines to flash or install Stock ROM (Scatter Firmware) on Mediatek devices using the SP Flash Tool.
androidmtk.com
Click to expand...
Click to collapse
is it okey or I'm the only one whose phone just keeps getting recognized and unrecognized by the PC every 5-10 sec ????
even though i have tried same with diffrent PCs and diffrent cables
PLEEEEEEEEEEEEASE HELP because this is by far the biggest obstacle I had in this precedure
It is not OK, you are the only one
Start from BROM mode and proceed from there.
viktak said:
It is not OK, you are the only one
Start from BROM mode and proceed from there.
Click to expand...
Click to collapse
I appreciate your response but
i did it all
i already have python the last version
i downloaded the MTK driver
i pressed the whole 3 buttons in the phone connected to PC (the phone didn't give any output at all)
i did set it up (which does appear and dissapear in every 5secs so I had to be quick)
then for the main.py file didn't capture the phone (obviously because I constantly hear the devices get recognized and unrecognized and nor the cable nor the PC are the cause
the theeere I am, stuck in the very 1st step.
please I would be so thankful if you could diagnose the problem just for me to know what to do.
personally I don't think it's a phone hardware problem because back in the days lol i unlocked bootloader and installed recovery, all was very functional and everything responded smoothly
if you wanted to know any other detail i would be so pleasured to tell you
I don't have the time now. Earliest I can help you is on Monday. Send me a PM to arrange for it.
viktak said:
I don't have the time now. Earliest I can help you is on Monday. Send me a PM to arrange for it.
Click to expand...
Click to collapse
alright, appreciate it
thank you
pardon my abbreviations knowledge but I really don't know what a PM is
Did anyone found the way to back the phone to life???
If anyone can respond me quickly I will apreciate it.
Yes, it's quite easy. Just follow my guide on my blog. DM for details.
viktak said:
Yes, it's quite easy. Just follow my guide on my blog. DM for details.
Click to expand...
Click to collapse
Ok, I will see
viktak said:
Yes, it's quite easy. Just follow my guide on my blog. DM for details.
Click to expand...
Click to collapse
I have a problem, I can't make it work, not even the fastboot or MTK tools
viktak said:
Yes, it's quite easy. Just follow my guide on my blog. DM for details.
Click to expand...
Click to collapse
post a link to your blog
viktak said:
I don't have the time now. Earliest I can help you is on Monday. Send me a PM to arrange for it.
Click to expand...
Click to collapse
i need help on this very issue pls help meee