Hi all, dumbass me was so excited to get a new phone, I went around Redmi Note 10 ROMs on my Note 10 5G and bricked it... It won't boot into fastboot or recovery. When I boot it up holding the up/power buttons, the screen lights up and phone gets briefly recognized by my computer before rebooting. I've done some digging around and tried to find edl point? of this phone but couldn't get far. Any help would be appreciated!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
assistance... you have lost warranty. anyway you can try this metod (work with my old mia3 but have a qualcomm chipset)
first: CLOSE YOUR PHONE!
install mi pro flash tool https://www.androidfilehost.com/?fid=14943124697586360238
PRESS power+ vol up+vold -
connet to pc via USB
OPEN MIflash tool pro
if your phone will be recognized you can flash stock firmware
with miflash pro you can install all drivers you need (but i'm not sure, test by yourself)
good luck.
if this procedure don't work go to an assistance point. you have damaged the bootloader
before mod devices with a/b partitions is very important read guides with attention. if you don't want trash a new device
you can also try sp flash tool, specific for mtk devices
How-to flash or install Stock ROM (Firmware) using SP Flash Tool
Step-by-Step guidelines to flash or install Stock ROM (Scatter Firmware) on Mediatek devices using the SP Flash Tool.
androidmtk.com
tannedcan said:
Hi all, dumbass me was so excited to get a new phone, I went around Redmi Note 10 ROMs on my Note 10 5G and bricked it... It won't boot into fastboot or recovery. When I boot it up holding the up/power buttons, the screen lights up and phone gets briefly recognized by my computer before rebooting. I've done some digging around and tried to find edl point? of this phone but couldn't get far. Any help would be appreciated! View attachment 5431881
Click to expand...
Click to collapse
did you even open it? tannedcan in every single post where there are instructions how to root/unlock/change rom
there is a DISCLAIMER for a reason.
that msg remark that you can brick your device if you dont know what you are doing or if you have doubts!
most of times things can be recovered but NEVER open a device in warranty.
simika said:
did you even open it? tannedcan in every single post where there are instructions how to root/unlock/change rom
there is a DISCLAIMER for a reason.
that msg remark that you can brick your device if you dont know what you are doing or if you have doubts!
most of times things can be recovered but NEVER open a device in warranty.
Click to expand...
Click to collapse
yes, i'm 100% agree with you
tannedcan said:
Hi all, dumbass me was so excited to get a new phone, I went around Redmi Note 10 ROMs on my Note 10 5G and bricked it... It won't boot into fastboot or recovery. When I boot it up holding the up/power buttons, the screen lights up and phone gets briefly recognized by my computer before rebooting. I've done some digging around and tried to find edl point? of this phone but couldn't get far. Any help would be appreciated! View attachment 5431881
Click to expand...
Click to collapse
I was exactly in same trouble, use This guide that solve the issue.
How to flash an MTK secure boot device without a custom DAThis is a step by step guide showing how to flash a Mediatek (MTK) secure boot device without using a custom download agent (DA). A little history Secure Boot M
forum.hovatek.com
Press mobile three buttons and connect cable to pc (use USB 2.0) to enter BROM mode (are like ERL mode in Snapdragon models). Because mtk models don't have test point. So don't need to disarm mobile.
Did you find the solution?
please any solution? i am into same problem. need stock rom for
Redmi Note 10 5G choppin
Zaiserr2 said:
I was exactly in same trouble, use This guide that solve the issue.
How to flash an MTK secure boot device without a custom DAThis is a step by step guide showing how to flash a Mediatek (MTK) secure boot device without using a custom download agent (DA). A little history Secure Boot M
forum.hovatek.com
Press mobile three buttons and connect cable to pc (use USB 2.0) to enter BROM mode (are like ERL mode in Snapdragon models). Because mtk models don't have test point. So don't need to disarm mobile.
Click to expand...
Click to collapse
this really helped, thanks but only with usb 3.0
tannedcan said:
Hi all, dumbass me was so excited to get a new phone, I went around Redmi Note 10 ROMs on my Note 10 5G and bricked it... It won't boot into fastboot or recovery. When I boot it up holding the up/power buttons, the screen lights up and phone gets briefly recognized by my computer before rebooting. I've done some digging around and tried to find edl point? of this phone but couldn't get far. Any help would be appreciated! View attachment 5431881
Click to expand...
Click to collapse
same issue sir my device show handshake failed during flashing
wetito said:
assistance... you have lost warranty. anyway you can try this metod (work with my old mia3 but have a qualcomm chipset)
first: CLOSE YOUR PHONE!
install mi pro flash tool https://www.androidfilehost.com/?fid=14943124697586360238
PRESS power+ vol up+vold -
connet to pc via USB
OPEN MIflash tool pro
if your phone will be recognized you can flash stock firmware
with miflash pro you can install all drivers you need (but i'm not sure, test by yourself)
good luck.
if this procedure don't work go to an assistance point. you have damaged the bootloader
before mod devices with a/b partitions is very important read guides with attention. if you don't want trash a new device
you can also try sp flash tool, specific for mtk devices
How-to flash or install Stock ROM (Firmware) using SP Flash Tool
Step-by-Step guidelines to flash or install Stock ROM (Scatter Firmware) on Mediatek devices using the SP Flash Tool.
androidmtk.com
Click to expand...
Click to collapse
is it okey or I'm the only one whose phone just keeps getting recognized and unrecognized by the PC every 5-10 sec ????
even though i have tried same with diffrent PCs and diffrent cables
PLEEEEEEEEEEEEASE HELP because this is by far the biggest obstacle I had in this precedure
It is not OK, you are the only one
Start from BROM mode and proceed from there.
viktak said:
It is not OK, you are the only one
Start from BROM mode and proceed from there.
Click to expand...
Click to collapse
I appreciate your response but
i did it all
i already have python the last version
i downloaded the MTK driver
i pressed the whole 3 buttons in the phone connected to PC (the phone didn't give any output at all)
i did set it up (which does appear and dissapear in every 5secs so I had to be quick)
then for the main.py file didn't capture the phone (obviously because I constantly hear the devices get recognized and unrecognized and nor the cable nor the PC are the cause
the theeere I am, stuck in the very 1st step.
please I would be so thankful if you could diagnose the problem just for me to know what to do.
personally I don't think it's a phone hardware problem because back in the days lol i unlocked bootloader and installed recovery, all was very functional and everything responded smoothly
if you wanted to know any other detail i would be so pleasured to tell you
I don't have the time now. Earliest I can help you is on Monday. Send me a PM to arrange for it.
viktak said:
I don't have the time now. Earliest I can help you is on Monday. Send me a PM to arrange for it.
Click to expand...
Click to collapse
alright, appreciate it
thank you
pardon my abbreviations knowledge but I really don't know what a PM is
Did anyone found the way to back the phone to life???
If anyone can respond me quickly I will apreciate it.
Yes, it's quite easy. Just follow my guide on my blog. DM for details.
viktak said:
Yes, it's quite easy. Just follow my guide on my blog. DM for details.
Click to expand...
Click to collapse
Ok, I will see
viktak said:
Yes, it's quite easy. Just follow my guide on my blog. DM for details.
Click to expand...
Click to collapse
I have a problem, I can't make it work, not even the fastboot or MTK tools
viktak said:
Yes, it's quite easy. Just follow my guide on my blog. DM for details.
Click to expand...
Click to collapse
post a link to your blog
viktak said:
I don't have the time now. Earliest I can help you is on Monday. Send me a PM to arrange for it.
Click to expand...
Click to collapse
i need help on this very issue pls help meee
Related
[GUIDE] Unbrick Tool for OnePlus 5 with OOS 9.0.9 & OOS 9.0.11 (Untouched full stock)
Hello Everyone !!
=>A hard bricked OP5 has nothing but a black screen (nothing ever comes on the screen, not even a boot logo), it might vibrate when a power button is pressed and held for 20 seconds, has no Recovery partition, no adb mode, and no fastboot partition (It might be a flickering OnePlus logo). The device might be detected in Linux and you might be able to even send commands to it. In Windows, the bricked OP5 should be detected as QHUSB_BULK,Unknown Device,Qualcomm something. You might have a bricked OP5 as a result of flashing a kernel meant for a different device (or a ROM meant for another device that included a kernel), tinkering with the boot logo or bootloader, or your attempt of unlocking the bootloader resulted in corrupting the boot partition. Most of the times, it is needed because OEM Unlocking is disabled, and phone can't boot and no recovery.
=>The solution for OP5 hardbrick is similar to OP3,OP3T- you just need a Qualcomm driver and a recovery package.it'll help to get out from one of the most weird state of the phone.(file is exact file from OnePlus)
METHOD
This method is easy to use and flashes OxygenOS 5.1.7 and OxygenOS 9.0.9 on your phone. It wipes all your data and restores all partitions to stock. It will work in any condition unless it is a hardware damage.
Step 1 :- DOWNLOADS :-
OOS 9.0.9: https://mega.nz/file/O4dGFI4b#mbqq8VqUiPwoN85ajTV-H2pDNccD58-ccejQnTQHIBE
OOS 9.0.11:https://mega.nz/file/ekUURaII#FPoezmYL1hPJUkb2Hf90ZqW07iEaCza6etnTPSKJOos
Step 2 :- Extract Drivers and Recovery Tool files on Desktop.
Step 3 :- If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :- http://www.howtogeek.com/167723/how-...igned-drivers/
Step 4 :- Press the power button for 40 seconds to turn off the phone.
Step 5 :- Press only volume up button for 10 seconds and while keeping it pressed,connect your phone to PC.Keep volume up pressed till your device shows in device manager as [Unknown Device,QHUSB_BULK (under Unknown Devices) or Qualcomm HS USB ...... (under COMs and Ports)].
Step 6 :- Right Click on your device in the device manager and select Update Device Software. Choose the .inf file manually from x86 or x64 folder as the case implies and select Qualcomm 9008 from the listed devices.If you are unable to see 9008,see the end of post for various other methods to show Qualcomm 9008.
Step 7 :- When the device shows as Qualcomm 9008 ,go to the extracted Recovery Package and run the MSM Download Tool as administrator.
Step 8 :- Click start at top left corner and wait for it to finish (green text will come).
Step 9 :- Disconnect phone from PC and boot into system.
How to Make the device show as Qualcomm 9008
1.) Make sure driver signature enforcement is disabled.
2.) Try these drivers,one of them might work too :-
https://www.androidfilehost.com/?fid=24052804347799753
https://www.androidfilehost.com/?fid=24269982086990168
https://www.androidfilehost.com/?fid=24349802275800175
https://www.androidfilehost.com/?fid=24349802275800173
https://www.androidfilehost.com/?fid=24349802275800171
3.)Download this :- http://www.mediafire.com/file/4aqwyi3g1d6wc67/Qualcomm+1.00.11.rar
Keep phone disconnected from PC.
Open the folder "qc" and install the Test Certificate in the following Stores: Trusted Root, Trusted Publisher, Third-Party Root and Personal
Run the Qualcomm setup wizard (also located in the qc folder)
When completed, restart your PC again with Driver Signature Disabled. (Optional but preferred)
The driver should now automatically install. If not, go to device manager and right click "Unknown Device" and click "Update Driver" Search up the QC folder and press ok. The driver should now install.
P.S.: I found the fix for bootloader menu which was changing after flashing through this tool. Just flash the zip in the recovery from the link below after flashing the rom through this tool, and you are good to go.
Please boot your device, set it up then go back to recovery and flash this file.
https://mega.nz/file/n10kkKCQ#LmCm_TDDyZ9cdZPf2pk0mSSV1bgvZflENQG0ubl15SY
NOTE: When the tool gives the "Sahara error", DON'T DISCONNECT THE PHONE from your PC, and press vol up and power button. It maybe seem stupid as a fix but generally it works.
IMP NOTE: There is a quick update, recently I also got stuck at param processing while flashing my device. So uploading the tool which works well. Here is the link. https://mega.nz/file/C1Nw3Cyb#znHfATPuRN4rAy1ZnDO4kMcftEkQ1P6enGxRGSiBh2E
IMP NOTE: There is a quick update, the tool is updated with latest TREBLE OS.
CREDITS @vasu97 - for helping and motivating me to create this thread
@Mar-cel - for bootloader fix zip
Click thanks IF i helped you
Where did you get this file, after I restored it, the bootblock unlock menu changed, is that normal?
Yes it is normal, mine also changed. May be they changed something in latest tool
Hi! First of all, thx for this post. I am getting Error 258 when i execute the tool. I am getting " Qualcomm HS-USB QDLoader 9008" in device manager, is that right? When i'm executing the program, he begins to download cache.img, and then stop and shows me this error :T Gonna send some pics to better ilustrate it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you help me? Thx again.
EDIT: I forgot to mention that my cellphone turns on the led, in color green, when the tool starts to running.
cidsantiago said:
Hi! First of all, thx for this post. I am getting Error 258 when i execute the tool. I am getting " Qualcomm HS-USB QDLoader 9008" in device manager, is that right? When i'm executing the program, he begins to download cache.img, and then stop and shows me this error :T Gonna send some pics to better ilustrate it.
Can you help me? Thx again.
EDIT: I forgot to mention that my cellphone turns on the led, in color green, when the tool starts to running.
Click to expand...
Click to collapse
hv u tried running this tool as administrator abd ur fone shud not turn on any of the led while flashing.. if u r on twrp try format data .. and then try flashing it thru tool.. or may be its bad download at ur side. redownload again.. and try
cidsantiago said:
Hi! First of all, thx for this post. I am getting Error 258 when i execute the tool. I am getting " Qualcomm HS-USB QDLoader 9008" in device manager, is that right? When i'm executing the program, he begins to download cache.img, and then stop and shows me this error :T Gonna send some pics to better ilustrate it.
View attachment 4445915
View attachment 4445916
Can you help me? Thx again.
EDIT: I forgot to mention that my cellphone turns on the led, in color green, when the tool starts to running.
Click to expand...
Click to collapse
Don't worry about green led light while flashing with tool its normal behavior, and about error...maybe because of bad download for sure,try attaching your phone again or check the drivers again...and look at the firs comment - seems like tool is working fine.
djnim said:
hv u tried running this tool as administrator abd ur fone shud not turn on any of the led while flashing.. if u r on twrp try format data .. and then try flashing it thru tool.. or may be its bad download at ur side. redownload again.. and try
Click to expand...
Click to collapse
Yes, i ran it as administrator. M phone was totally bricked, i only got signal in him when i connected at the PC. But i always had this error :T I downloaded it at least 5 times, and got always the same results.
vasu97 said:
Don't worry about green led light while flashing with tool its normal behavior, and about error...maybe because of bad download for sure,try attaching your phone again or check the drivers again...and look at the firs comment - seems like tool is working fine.
Click to expand...
Click to collapse
I did it all, believe me. Reinstalled the drivers multiples times, differents PCS, differents USB ports... I think it was a hardware problem.
I already sent my phone to RMA, so i think it was solved, one way or another But thanks for your replies
cidsantiago said:
Yes, i ran it as administrator. M phone was totally bricked, i only got signal in him when i connected at the PC. But i always had this error :T I downloaded it at least 5 times, and got always the same results.
I did it all, believe me. Reinstalled the drivers multiples times, differents PCS, differents USB ports... I think it was a hardware problem.
I already sent my phone to RMA, so i think it was solved, one way or another But thanks for your replies
Click to expand...
Click to collapse
ohh.. i got tensed as it is my very first thread .
best method to return sotck complete
Thanks for the clear instructions, you have just saved my phone
Dude, thanks for the guide. But kindly check your links in the post. Some are dead ( especially : the mediafire link you gave at last )
Hi
Thank you so much !
AnDrOiDnEoV said:
Dude, thanks for the guide. But kindly check your links in the post. Some are dead ( especially : the mediafire link you gave at last )
Click to expand...
Click to collapse
That's correct. The right link is this: http://www.mediafire.com/file/4aqwyi3g1d6wc67/Qualcomm+1.00.11.rar
Hi, thanks for making this guide with such clear instructions!
I've done every step according to the guide, but I keep facing this issue:
Just to clarify I did run it as administrator.
Are you going to update (5.1.2)?
esedix02 said:
Are you going to update (5.1.2)?
Click to expand...
Click to collapse
If i Get it then yes for sure
Op updated with the bootloader fix, which helps to revert to old bootloader menu.
Op updated with new tool which includes OOS 5.1.2.
Mate she worked a charm! I wasn't bricked but wanted to restore to full stock after issues with open beta rims, firmware and AOSP roms. Was the simplest way to achieve a fresh start
it downloads the ROM while flashing? Or ROM is included in given link by OP?
So, I tried to install TWRP and Magisk and something gone wrong.
Now my phone is looping in Redmi Logo. I can't go to Recovery Mode or Fastboot, also a simple shutdown doesn't work.
My computer don't recognize when my phone is in USB (no one device connect).
I was trying something and sometimes recognize when pressing both volume buttons.
And now I am waiting my batery runs out...
Anyone know how to solve this?
Sorry for my bad english btw.
How did you install magisk exactly?
VD171 said:
How did you install magisk exactly?
Click to expand...
Click to collapse
I used this commands on ADB
fastboot devices
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot flash misc misc.bin
fastboot boot recovery.img
These images was TWRP installation.
[GUIDE][UNBRICK] How unbrick your bootloop in MERLIN after flashing TWRP (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
If you try to flash the file misc.bin your device can be in bootloop forever, please follow this guide to fix it. It works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Method 1: Once your device is on the black screen, plug it on USB (try...
forum.xda-developers.com
cxdu said:
So, I tried to install TWRP and Magisk and something gone wrong.
Now my phone is looping in Redmi Logo. I can't go to Recovery Mode or Fastboot, also a simple shutdown doesn't work.
My computer don't recognize when my phone is in USB (no one device connect).
I was trying something and sometimes recognize when pressing both volume buttons.
And now I am waiting my batery runs out...
Anyone know how to solve this?
Sorry for my bad english btw.
Click to expand...
Click to collapse
same problem :,(
VD171 said:
[GUIDE][UNBRICK] How unbrick your bootloop in MERLIN after flashing TWRP (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
If you try to flash the file misc.bin your device can be in bootloop forever, please follow this guide to fix it. It works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Method 1: Once your device is on the black screen, plug it on USB (try...
forum.xda-developers.com
Click to expand...
Click to collapse
I've tried these two methods, not solved.
ADB don't recognize my phone.
wass8855 said:
same problem :,(
Click to expand...
Click to collapse
I hope we find the issue and fix it.
Flash the stock miui rom.
VD171 said:
Flash the
VD171 said:
Flash the stock miui rom.
Click to expand...
Click to collapse
how ?
Click to expand...
Click to collapse
can you access fastboot mode? your devices' bootloader is unlocked? or locked? if you not access your fastboot mode you have to open phone cover and connect 2 pin together and open edl mode and flash rom via edl mode.
37berat37 said:
can you access fastboot mode? your devices' bootloader is unlocked? or locked? if you not access your fastboot mode you have to open phone cover and connect 2 pin together and open edl mode and flash rom via edl mode.
Click to expand...
Click to collapse
my bootloader is unlocked and i can't access fastboot
if your pc see your phone, can you try adb shell, and su code if it is see then we flash boot.img via dd codes.
VD171 said:
Flash the stock miui rom.
Click to expand...
Click to collapse
37berat37 said:
can you access fastboot mode? your devices' bootloader is unlocked? or locked? if you not access your fastboot mode you have to open phone cover and connect 2 pin together and open edl mode and flash rom via edl mode.
Click to expand...
Click to collapse
My phone is unlocked, so I can't access the fastboot mode.
Today my battery runs out, but when I plug USB cable it starts in Redmi logo and loop again.
And my PC don't recognize the phone, so I can't Flash or use ADB to reboot.
About EDL mode, I'll try.
how is not entering fastboot mode, it is very interesting? https://forum.miuiturkiye.net/konu/redmi-note-8-pro-yetkili-hesabi-atlamak-unbrick.104415/ can you try this link, it is turkish so you have to convert to english, if you not understand anyting ask me
37berat37 said:
how is not entering fastboot mode, it is very interesting? https://forum.miuiturkiye.net/konu/redmi-note-8-pro-yetkili-hesabi-atlamak-unbrick.104415/ can you try this link, it is turkish so you have to convert to english, if you not understand anyting ask me
Click to expand...
Click to collapse
Following method 1:
I could go to number 8 without problems, in LibUSB for instant I can saw the MediaTek USB Port and could install, but it disappear.
In number 10 this message appear on brom.bat, I think something gone wrong:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And in Flash Tool the port COM5 appear when I press the Vol- key, but dissapear instantly, so I can't change of COM1...
OBSERVATION: I can't power off my phone, actually it is without battery, but when I plug on USB it jump to Redmi logo.
OBSERVATION²: I tried to continue pressing Vol- key to see if the port still, unsuccessful...
in number 9 they are saying:
9. Ardından Bypass dosyasına geçip brom.bat komutunu çalıştırıyoruz. (Bu arada cihaz hala kapalı olmalı.)
9. start brom.bat(your phone has to close)
I think your phone is open?
37berat37 said:
in number 9 they are saying:
9. Ardından Bypass dosyasına geçip brom.bat komutunu çalıştırıyoruz. (Bu arada cihaz hala kapalı olmalı.)
9. start brom.bat(your phone has to close)
I think your phone is open?
Click to expand...
Click to collapse
No, is not.
Here, the translate from turkish is like:
"9. Then we go to the Bypass file and run the brom.bat command. (By the way, the device must still be turned off.)"
I can't turn it off.
If you're speaking about the back cover, I can't open it.
https://forum.miuiturkiye.net/konu/...esabi-atlamak-unbrick-mtk-bypass-auth.105101/
sorry I send to you redmi note 8 pro, correct link in here look at this one
first steps same with redmi note 8 pro but files different look at this one and tell me if you have any problem.
/Translate/
Bypass_MTK Download the file.
We introduce the driver of the Redmi Note 9 phone to the Libusb Filter program by pressing the VOLUME + / VOLUME - keys at the same time and inserting the usb cable. We don't just press VOLUME+ as in Note 8 Pro.
You can find the original files from the source here. I just compiled and made it working for you
cxdu said:
Following method 1:
I could go to number 8 without problems, in LibUSB for instant I can saw the MediaTek USB Port and could install, but it disappear.
In number 10 this message appear on brom.bat, I think something gone wrong:
View attachment 5385027
And in Flash Tool the port COM5 appear when I press the Vol- key, but dissapear instantly, so I can't change of COM1...
OBSERVATION: I can't power off my phone, actually it is without battery, but when I plug on USB it jump to Redmi logo.
OBSERVATION²: I tried to continue pressing Vol- key to see if the port still, unsuccessful...
Click to expand...
Click to collapse
we r having the exact same problem cuz when i press power button with volume- button my pc detects it for a while then it disappears
when pc detecs can you do adb shell and su code?
I have bricked Mi 11 Ultra 12/512 CN version. Cant enter Recovery, also it has locked bootloader.
What amazes me, I paid for EDL flash, it didn't work. Phone just bootloops 10 times and gets in fastboot again.
Also, i tried shorting pins method to enter EDL, in unofficial service store, that didnt help too.
My phone has a different problem.
Does anyone know how to fix my phone, would motherboard replacement help? (Its hard to find them too).
Official Xiaomi service in EU cant fix my phone because of Chinese IMEI, they dont have support for it.
Selling phone for parts doesnt work too, because no one wants to sink money into new expensive phone.
Skayzee said:
I have bricked Mi 11 Ultra 12/512 CN version. Cant enter Recovery, also it has locked bootloader.
What amazes me, I paid for EDL flash, it didn't work. Phone just bootloops 10 times and gets in fastboot again.
Also, i tried shorting pins method to enter EDL, in unofficial service store, that didnt help too.
My phone has a different problem.
Does anyone know how to fix my phone, would motherboard replacement help? (Its hard to find them too).
Official Xiaomi service in EU cant fix my phone because of Chinese IMEI, they dont have support for it.
Selling phone for parts doesnt work too, because no one wants to sink money into new expensive phone.
Click to expand...
Click to collapse
When in fastboot mode, flash the stock rom your phone came with.
Samdaja said:
When in fastboot mode, flash the stock rom (fastboot version) your phone came with using MiFlash tool.
Click to expand...
Click to collapse
When you do that, MiFlash asks you for authorized account. You cant flash alone using MiFlash if the bootloader is locked.
Skayzee said:
When you do that, MiFlash asks you for authorized account. You cant flash alone using MiFlash if the bootloader is locked.
Click to expand...
Click to collapse
If fastboot devices shows ur phone, use the fastboot version of the stock rom to flash via Fastboot
Samdaja said:
If fastboot devices shows ur phone, use the fastboot version of the stock rom to flash via Fastboot
Click to expand...
Click to collapse
Fastboot devices command doesn't show my device. Device is only visible when you get it in EDL (emergency download) mode. And tried flashing 3 times, every time it boots up to fastboot...
Skayzee said:
Fastboot devices command doesn't show my device. Device is only visible when you get it in EDL (emergency download) mode. And tried flashing 3 times, every time it boots up to fastboot...
Click to expand...
Click to collapse
Best to send the phone back to china to be repaired if that is an option.
Samdaja said:
Best to send the phone back to china to be repaired if that is an option.
Click to expand...
Click to collapse
Thanks, i have some friend travelling from my country to China now and then so i will see what i can do.
Can you explain what exactly you've done?
from what you said I understand that you've flashed a different rom and locked boot loader. and now it is stuck in bootloop and fastboot. is that correct?
as long as you can go to fastboot. have you tried to unlock bootloader again your official unlock tool? happened with me and it worked, once unlocked bootloop stopped and device ran into system straight away. as simple as that. and yes, with non official rom installed and locked bootloader.
if you can explain to us a bit more from the beginning that would be more helpful.
hassanaliyeh said:
Can you explain what exactly you've done?
from what you said I understand that you've flashed a different rom and locked boot loader. and now it is stuck in bootloop and fastboot. is that correct?
as long as you can go to fastboot. have you tried to unlock bootloader again your official unlock tool? happened with me and it worked, once unlocked bootloop stopped and device ran into system straight away. as simple as that. and yes, with non official rom installed and locked bootloader.
if you can explain to us a bit more from the beginning that would be more helpful.
Click to expand...
Click to collapse
Tried doing it before, can't unlock before going into developer options and ticking OEM unlocking and USB debugging.
Phone got bricked from failed software update, it just rebooted and got into fastboot... But as i said before its imported, no warranty.
Skayzee said:
Tried doing it before, can't unlock before going into developer options and ticking OEM unlocking and USB debugging.
Phone got bricked from failed software update, it just rebooted and got into fastboot... But as i said before its imported, no warranty.
Click to expand...
Click to collapse
Contact me private, I might be able to help
hassanaliyeh said:
Can you explain what exactly you've done?
from what you said I understand that you've flashed a different rom and locked boot loader. and now it is stuck in bootloop and fastboot. is that correct?
as long as you can go to fastboot. have you tried to unlock bootloader again your official unlock tool? happened with me and it worked, once unlocked bootloop stopped and device ran into system straight away. as simple as that. and yes, with non official rom installed and locked bootloader.
if you can explain to us a bit more from the beginning that would be more helpful.
Click to expand...
Click to collapse
The same thing happened to me, someone could help me please?
I had fastboot loop issue and edl bricked issue in mi 11 ultra twice times.. both of the times i managed to fix it by help of person in telegram remotely.. he is named @XiaomiAuthorizedflashing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kavishka678 said:
I had fastboot loop issue and edl bricked issue in mi 11 ultra twice times.. both of the times i managed to fix it by help of person in telegram remotely.. he is named @XiaomiAuthorizedflashing.View attachment 5888865
Click to expand...
Click to collapse
For free ?
infamas said:
For free ?
Click to expand...
Click to collapse
at the time i asked for help he helped me free...it was about 3-4 months ago . I don't know now if he does for free or not.. sorry
Kavishka678 said:
I had fastboot loop issue and edl bricked issue in mi 11 ultra twice times.. both of the times i managed to fix it by help of person in telegram remotely.. he is named @XiaomiAuthorizedflashing.View attachment 5888865
Click to expand...
Click to collapse
thank you so much for posting this sir. i asked help from the same guy for help after seeing your post and he unbricked my mi 11 pro(mars) really quick using teamviwer login to my pc. thank you again
Hi, my wife gifted me that Chopin phone form China, after a wrong "flash and lock" global firmware now my phone is stuck on bootloader.
According to this thread:
Redmi Note 10 Pro 5G brick
Redmi Note 10 Pro 5G Chinese version with fastboot unlocked. After unsuccessful firmware. At startup, it goes into fastboot, you can load it into recovery. Wipe doesn't help. When trying to flash through fastboot MiFlashPro "FAILED (remote: 'not...
forum.xda-developers.com
I have all the files needed to setup sp flash and try to put again the Rom in the phone, which is now not unlocked and no usb debugging on.
Can someone please give me a tutorial on how to use those files? My phone still not recognised in sp flash com port, I don't know how to do.
If anyone will help me it will be so appreciated, thanks!
If you need to disable authorisation, did you run the MTK Auth Bypass tool and get the message "Protection disabled"? That's what I had to do before SP Flash Tool would flash the phone (without disconnecting it or rebooting), and I also had to set the baud rate to 921600, although that was all under Linux, and the phone was still unlocked.
it's complicated. with phone locked fastboot commands don't work. with my hold mi a3 fastboot flashing unlock command work. but with miui and mtk chipset probably it's useless. but u can try. if u boot into bootloader with mediatek driver the pc should recognize your phone also if it's blocked
1: Unzip this attached file into a folder. run it.
2: select the unlock bootloader and start, then connect you phone via usb with all three buttons pressed. (Phone must be off before connect, )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3: Your bootloader will be unlocked.
4: Close the program and re-start again, this time, select auth bypass and start, then repeat the phone connection. after at the bottom line, it show bypass ok.
from here you may flash again rom via Miflash or SPflash.
P.S: I think the file size is too big, I can not attach it here. Sorry! P.M me if you wish.
Thanks for the help, the problem I'm facing it's Auth tool cont recognise the phone, when I open the shell keep saying waiting for the device.
Driver are mtk with Libus installed, dunno.
When I restart the phone immediately have the logo then, if volume up I can log mi assistant or with volume down the bootloader screen.
Bonscia said:
Thanks for the help, the problem I'm facing it's Auth tool cont recognise the phone, when I open the shell keep saying waiting for the device.
Driver are mtk with Libus installed, dunno.
When I restart the phone immediately have the logo then, if volume up I can log mi assistant or with volume down the bootloader screen.
Click to expand...
Click to collapse
1. Check your device driver for USB, suggest you re-install the MTK usb driver.
2. First run the program, select the Auth by pass then press start.
3. Make sure phone is in "power off" state, press Vol+, Vol- and power (all three at the same time), and don't release it, plug in USB cable and wait.... Don't release these three buttons until it is Auth by pass OK.
During this process, take a look at device manager, there must be one item like portable device - USB ( Com 3). keep flashing.
sure u add reinstall mtk driver
Tried many drivers, always same result:
Driver says the device can't start. Tried to install lisbus too but no changes.
Bonscia said:
Tried many drivers, always same result:
View attachment 5499127
View attachment 5499129
Driver says the device can't start. Tried to install lisbus too but no changes.
Click to expand...
Click to collapse
you "must" remove (uninstall) the driver first then re-install the MTK usb driver again.
kirinin said:
you "must" remove (uninstall) the driver first then re-install the MTK usb driver again.
Click to expand...
Click to collapse
I did that many times, with win 10 no drivers signed mode, with many different mtk drivers but nothing was working. I'll try clean my windows and then start again with the drivers.
Bonscia said:
I did that many times, with win 10 no drivers signed mode, with many different mtk drivers but nothing was working. I'll try clean my windows and then start again with the drivers.
Click to expand...
Click to collapse
is a win10 problem that i also haved. hard to solve. u can try windows 7 via virtualbox (solved a lot of my problems in the past) or format and install a modded version of win10 (but i dont suggest this)
Virtual box looks no longer available, I'll install a fresh copy of win 7 in another partition, never give up lol
virtualbox is available for all system. i have a win7 virtualized under my linux pc, and miflash works fine. no bugs. if my tips makes you happy dont try. is not my problem, i didnt bricked my phone. i dont make things without know what i'm doing. good look. u can buy a new phone if u prefere
wetito said:
virtualbox is available for all system. i have a win7 virtualized under my linux pc, and miflash works fine. no bugs. if my tips makes you happy dont try. is not my problem, i didnt bricked my phone. i dont make things without know what i'm doing. good look. u can buy a new phone if u prefere
Click to expand...
Click to collapse
? I've just told you I've tried to download virtual box for win 10 but it's not avaible now or server was temporarily down for the download, so my only way it's to set up a fresh copy on win 7 on my pc, I can't understand your hanger answer.
kirinin said:
1: Unzip this attached file into a folder. run it.
2: select the unlock bootloader and start, then connect you phone via usb with all three buttons pressed. (Phone must be off before connect, )
View attachment 5498521
3: Your bootloader will be unlocked.
4: Close the program and re-start again, this time, select auth bypass and start, then repeat the phone connection. after at the bottom line, it show bypass ok.
View attachment 5498523
from here you may flash again rom via Miflash or SPflash.
P.S: I think the file size is too big, I can not attach it here. Sorry! P.M me if you wish.
Click to expand...
Click to collapse
Hi, can you share this Zip file with link drive or mega?
Thanks in advance
Which zip file? I have only this one
https://forum.xda-developers.com/attachments/mtk_bypass_final-rar.5444529/I
finally flashed the Rom with so flash but now the phone reboot in assistance mode sayings "NV data corrupted" I'm about to cry
Hi, I've followed your instructions, I've finally flashed the Rom into the phone, but now phone bootloop into recovery, it says "nvdata is corrupted", I've took the scatter file from the Rom folder, how to fix that problem now? Thanks.
Link with files is this, I've seen other link don't work
Redmi Note 10 Pro 5G brick
Redmi Note 10 Pro 5G Chinese version with fastboot unlocked. After unsuccessful firmware. At startup, it goes into fastboot, you can load it into recovery. Wipe doesn't help. When trying to flash through fastboot MiFlashPro "FAILED (remote: 'not...
forum.xda-developers.com
Download MTK Universal Tool V5 | MediaTek All in One Tool Latest Free
MTK Universal V5 Tool is a small MediaTek All in One Tool designed to disable user locks, bypass FRP, Auth Bypass, Format Data (user data format),
www.gadgetsdr.com
Bonscia said:
Hi, I've followed your instructions, I've finally flashed the Rom into the phone, but now phone bootloop into recovery, it says "nvdata is corrupted", I've took the scatter file from the Rom folder, how to fix that problem now? Thanks.
Click to expand...
Click to collapse
try wipe data. also u can control the active slot. try change it and reboot
Hi, finally I can install the Recovery V12.5.16.0.RKPCNXM rom and the engineering rom but have no baseband and no IMEI. Tried many times to put my IMEI codes with no luck, looks I need the mt6893 modem file to use sn writer but no way to find them on net, can someone share those files please? Thanks
Few things to keep in mind before starting the process:
If you are on ColorOS12 make sure you are flashing OxygenOS12 and NOT OxygenOS 13; similarly if you are ColorOS13 you will have to use OxygenOS13 zip.
You must ALWAYS use OxygenOS newer than the ColorOS you have currently installed.
[English] Written Instructions:
(Note this is for 10pro, steps are the same but DON'T use any firmwares mentioned there)
How to Install Indian ROM on Chinese OnePlus 10 Pro
In this comprehensive tutorial, we will show you the detailed steps to install the Indian ROM on the Chinese OnePlus 10 Pro.
www.droidwin.com
[Chinese] Written Instructions:
关于一加ACE如何优雅的刷入氧OS12.1这件事 来自 天伞桜 - 酷安
Video Tutorial:
Downloads Links:
80W_C.15_OOS_Android13
150W_C.15_OOS_Android13
You can also follow the same instructions if you wish to convert to ColorOS. Just make sure you use ColorOS zip in that case.
Download link for ColorOS:
150W_ColorOS_C.17_Android13
I flashed OxygenOS into my new china OnePlus ACE (model PGKM10) recently. I'd like to share my experience here.
Note:
Be careful about each step, any small mistake might make your device hard bricked. If so, you have to contact the official service center to send your phone, or search for a random people who have the official internal tools to help you.
Don't simply reboot your phone if some error happened in fastboot mode, otherwise it might hard bricked.
Don't mess android version. For example use OxygenOS Android 13 and ColorOS Android 12, It will hard bricked.
Read it all before you touch your phone and PC!
Steps:
Prepare Fastboot Enhance (windows only), an OxygenOS rom.
Boot into your OnePlus ACE, enter developer mode, and enable oem unlocking and USB debugging.
Try to connect your phone with your PC. If you are using Windows 10 or newer, it would install OnePlus driver. It's necessary, otherwise you PC might not recognize your phone after enter fastboot mode. If you are using other OS, it's not required.
Turn off your device, enter fastboot mode. Note the fastboot interface looks like normal boot interface, but with some tiny text in the middle that says it's in fastboot mode.
Run fastboot flashing unlock to unlock partitions for flashing.
Prepare Fastboot Enhance, note it's windows only. If you are using other OS, you need to use fastboot command line tool, do it manually, and it has high risk. I failed once at the fastboot commands, and hard bricked.
Open fastboot enhance, click Partitions button, press Flash payload.bin, select the payload.bin file in the oxygenOS rom, and start. Some tutorials says to remove *-cow partitions, but I didn't find these partitions. That's fine.
If everything success, you can reboot your phone and enjoy!
Troubleshooting:
Myphone is not recognized by PC.
That's because your Windows PC needs OnePlus driver, try step 3.
If you completed step 3, but still got this problem. Just search it, you will get a lot of solutions. They are basically install winusb driver manually with the existing driver on PC.
My phone is hardbricked.
Don't worry.
Don't waste your time to try to solve by yourself. For example, mtk-client don't work. As the author mentioned at issue 577, Mediatek has locked it (dimencity 8100) down completely. The only way as I know is to use the official OPPO internal tools (Qualcomm 9008 mode), it requires internet and an internal employee account. Though its name, it works also for Mediatek dimencity 8100.
One way is to contact the official service center, and send your device to them. I didn't try it, but I think they can solve your issue.
Another way is to find a person who has the official internal tools, and pay for the service. The pros of this way is the whole process is online, and fast. I found NC Phone on youtube, and solved my issue. Note in this way, a Windows 64-bit, teamviewer and internet is required.
I
6cdh said:
I flashed OxygenOS into my new china OnePlus ACE (model PGKM10) recently. I'd like to share my experience here.
Note:
Be careful about each step, any small mistake might make your device hard bricked. If so, you have to contact the official service center to send your phone, or search for a random people who have the official internal tools to help you.
Don't simply reboot your phone if some error happened in fastboot mode, otherwise it might hard bricked.
Don't mess android version. For example use OxygenOS Android 13 and ColorOS Android 12, It will hard bricked.
Read it all before you touch your phone and PC!
Steps:
Prepare Fastboot Enhance (windows only), an OxygenOS rom.
Boot into your OnePlus ACE, enter developer mode, and enable oem unlocking and USB debugging.
Try to connect your phone with your PC. If you are using Windows 10 or newer, it would install OnePlus driver. It's necessary, otherwise you PC might not recognize your phone after enter fastboot mode. If you are using other OS, it's not required.
Turn off your device, enter fastboot mode. Note the fastboot interface looks like normal boot interface, but with some tiny text in the middle that says it's in fastboot mode.
Run fastboot flashing unlock to unlock partitions for flashing.
Prepare Fastboot Enhance, note it's windows only. If you are using other OS, you need to use fastboot command line tool, do it manually, and it has high risk. I failed once at the fastboot commands, and hard bricked.
Open fastboot enhance, click Partitions button, press Flash payload.bin, select the payload.bin file in the oxygenOS rom, and start. Some tutorials says to remove *-com partitions, but I didn't find these partitions. That's fine.
If everything success, you can reboot your phone and enjoy!
Troubleshooting:
Myphone is not recognized by PC.
That's because your Windows PC needs OnePlus driver, try step 2.
If you completed step 2, but still got this problem. Just search it, you will get a lot of solutions. They are basically install winusb driver manually with the existing driver on PC.
My phone is hardbricked.
Don't worry.
Don't waste your time to try to solve by yourself. For example, mtk-client don't work. As the author mentioned at issue 577, Mediatek has locked it (dimencity 8100) down completely. The only way as I know is to use the official OPPO internal tools (Qualcomm 9008 mode), it requires internet and an internal employee account. Though its name, it works also for Mediatek dimencity 8100.
One way is to contact the official service center, and send your device to them. I didn't try it, but I think they can solve your issue.
Another way is to find a person who has the official internal tools, and pay for the service. The pros of this way is the whole process is online, and fast. I found NC Phone on youtube, and solved my issue. Note in this way, a Windows 64-bit, teamviewer and internet is required.
Click to expand...
Click to collapse
In the Step #7, it should be *-cow partitions, No?
yashaswee1708 said:
I
In the Step #7, it should be *-cow partitions, No?
Click to expand...
Click to collapse
Ah, yes, it's a typo. edited.
I using color os c18 version. Can I flash oxygenOs c15 version? Both using android 13.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sSjBlueVN197 said:
I using color os c18 version. Can I flash oxygenOs c15 version? Both using android 13.View attachment 5876919
Click to expand...
Click to collapse
Better use OxygenOS13 C.18
https://gauss-componentotacostmanual-in.allawnofs.com/remove-e7d2bf870d4f18a40c740c8e51f95561/component-ota/23/02/17/2e75056f9c944c9e83dbeee99dca4734.zip
yashaswee1708 said:
Better use OxygenOS13 C.18
https://gauss-componentotacostmanual-in.allawnofs.com/remove-e7d2bf870d4f18a40c740c8e51f95561/component-ota/23/02/17/2e75056f9c944c9e83dbeee99dca4734.zip
Click to expand...
Click to collapse
are you sent to me 150w version? I flashed that version then my phone are not working, boot into OS then reboot.....
sSjBlueVN197 said:
are you sent to me 150w version? I flashed that version then my phone are not working, boot into OS then reboot.....
Click to expand...
Click to collapse
Yes it's for 150W. What you said shouldn't happen! It has worked for others.
Are you able to boot into fastboot?
(Try all key combinations)
yashaswee1708 said:
Yes it's for 150W. What you said shouldn't happen! It has worked for others.
Are you able to boot into fastboot?
(Try all key combinations)
Click to expand...
Click to collapse
I can boot into fastboot. T have done according above steps. But in step #7, i can't find *cow file so after flashed, i reboot the system but it not working normaly
Launcher not working, It just display black screen and battert percent always display 0%. After 2~3 minute, my phone auto reboot system, and I can't factory reset in settings
sSjBlueVN197 said:
Launcher not working, It just display black screen and battert percent always display 0%. After 2~3 minute, my phone auto reboot system, and I can't factory reset in settings
Click to expand...
Click to collapse
Try factory reset from recovery?
sSjBlueVN197 said:
I can boot into fastboot. T have done according above steps. But in step #7, i can't find *cow file so after flashed, i reboot the system but it not working normaly
Click to expand...
Click to collapse
If you can boot in fastboot do the process again. I'll share the zip once again
oh, I'm trying factory from recovery, it can be done. Thanks you very much ^^!
after flashed OOS, can I re-lock bootloader?
sSjBlueVN197 said:
oh, I'm trying factory from recovery, it can be done. Thanks you very much ^^!
Click to expand...
Click to collapse
Let me know if the issues are fixed
sSjBlueVN197 said:
after flashed OOS, can I re-lock bootloader?
Click to expand...
Click to collapse
You can but the process is a bit complicated, on recent updates some time the phone is bricking when we run the query fastboot flashing lock.
So I won't recommend it. Until we can find a easier way.
yashaswee1708 said:
Let me know if the issues are fixed
Click to expand...
Click to collapse
oh yeah, Issue occur when flash without format data, only format data from recovery to resolve this issue ^^
sSjBlueVN197 said:
oh yeah, Issue occur when flash without format data, only format data from recovery to resolve this issue ^^
Click to expand...
Click to collapse
So currently everything is okay?
yashaswee1708 said:
So currently everything is okay?
Click to expand...
Click to collapse
yup, everything is OK
80W_C.15_OOS_Android13 it's for Ace racing bro?