i.imgur.com/nmT6mLA.jpg
Screen is not broken - i mean physically. Phone was in my pocket and then this (picture above)...WTF?
The digitizer is not damaged...
But the LCS screen IS broken, you must buy a new LCD screen, period.
there's a guide to do it yourself, if you want to.
Related
i've broken my kaiser screen and would like to use the software "my mobiler"
Hello ! My kaiser's screen is broken (touch screen out of order and i cant see anything on my screen) and i woud like to use this software on my phone: http://mymobiler.com/
Moreover i had a password on my phone and i donnot know if i can unlock my phone without using my touch screen. I would like to know if it's possible to install this software whithout using kaiser's touch screen and if it is, how i can do it because im lost...
Thanks a lot Bye.
Try and install Soti Pocket Controller over active sync. Press the left soft key at some stage to proceed with the cab install once it is transferred to the phone.
Or better still... buy a new phone or a new screen here
remarks said:
Or better still... buy a new phone or a new screen here
Click to expand...
Click to collapse
Nothing more to say really, thats about summed up this thread
Ive replaced a screen on a Kaiser already... Very easy to do.. (I should have taken pictures of the disassembly)...
Anyway, all you need to do is
1) flip the screen up
2) You will see 4 screws holding the screen assembly together. Remove these
3) Next, GENTLY prise of the front cover from the back cover.
(You will not be able to completely remove the front cover, as the board connector cannot be unplugged from the main board...
4) Once you have the screen front and back covers seperated, disconnect the LCD Connector from the Board.
5) Carefully push on the LCD screen to seperate it from the front cover.
6) Once the screen is seperated from the front cover, simply slide the damaged screen out between the SIM card, and main board wiring..
7) Replace the LCD panel, and reverse the proceedure...
Should take you about 30minutes to complete....
I bought the screen for $70au including postage... MUCH cheaper than buying a new Kaiser at over $1000Au a pop...
Lemme know if you need more detailed instructions.
Thanks for your answers!
Does this fix both touch screen and lcd or only lcd ?
Touch screen is cooked in the lcd. So if one of the two is broken, you have te replace the whole piece.
I need your help .I want to replace touch screen on my diamond , but I cannot find anywhere any manual how to remove LCD and touch screen. I have buy from ebay touch screen .Thanks for any help
On the net you can find service manuals for the Diamond. On YouTube you can find clips showing how to dismantle it.
BEWARE, it is not a job for the inexperienced. I have replaced displays and digitizers on several phones before but failed doing it on the Diamond.
I think the digitizer and display are glued to the frame.
I find service manual and how to dismantle it. But everything stop to lcd and touch screen .thanks
For sure don't try to do it yourself unless you really know what your doing
best bet is send it to HTC in the US its a 100 Fix.
I've gone through 2 ebay touch screens with no luck installing them when my screen cracked, and eventually just sent it out after too many failed attempts.
their is an extra screen mounted onto the digitizer that you can't get on the ebay digitizers
basically from the outside in,
Ebay:
Glass Screen/digitizer: touch screen
Actual Assembly
Glass Screen/digitizer: Touch screen: a 3rd fat screen mounted onto the touch screen
I had buy from ebay touch screen
I only want to replace my screen and keep the digitizer, is this possible?
So keep the digitizer and third screen an d replace the cracked lcd screen
Yes it's possible .Try with this manual :
http://www.pdacenter.ru/razborka/razbor-htc-touch-diamond/
http://www.youtube.com/watch?v=_jY46M_NGz0&feature=related
http://www.youtube.com/watch?v=IJ6XTjWD1i8
http://forum.xda-developers.com/showthread.php?t=411386
http://forum.xda-developers.com/showthread.php?t=412159
http://forum.xda-developers.com/showthread.php?t=407323
http://www.sparkelectronics.nl/en/repair/589_P3700_Touch_Diamond_Diamond_100__repair.html
These manuals are not enough for replacing the screen only. The last picture is with the frame still on it.
I tryed tonight and i can say that i'm the first person in the world that only replaced a HTC Diamond screen! I wil post a full report soon.
I've just replaced the LCD display on my kaiser and it works fine as a display, but the touch function doesn't work at all. The part numbers are the same (60H00091-00M) and so is the type number (TD028TTEB3).
I don't think I have damaged anything in assembly or disassembly - using instructions from this forum. The screen was new and the old one worked before being dinkled with a key in my pocket.
Is there anything I may have missed, easy to damage or misalign etc which I can check before hunting for a new screen or phone?
Thanks,
You need a digitizer too. Most ebay shops only sell a replacement lcd screens without that part (if you got it from there). So if yours didnt say it had a digitizer on it/with it, you won't have any touch input. The part number might match a good copy from China or whatever, but might not be an original screen.
Thanks for the reply.
This screen was brand new and did have the digitiser, but I'm guessing it was second or reject stock.
The ribbon cable connection from the digitiser to the screen had been re-soldered badly and one leg was shorted to the frame. I've resoldered this and the screen is now working properly again.
It was in my pocket and I ran into something. I bought this on amazon: http://www.amazon.com/gp/product/B003XMD9I2/ref=oh_o00_s00_i00_details
Is this enough, do I need to buy a new screen AND digitizer? or is this digitizer ok?
The digitizer is the actual screen that you touch. The SLCD and/or AMOLED screen is a different screen that lies below the touchscreen. When that is cracked, colors will start to bleed and the screen will eventually turn black.
If the digitizer is cracked, sometimes it will screw up with touch inputs, but other times it will work flawlessly.
You only need to replace the one that is broken.
Like the tittle says, screen is still working, but the glass has a big tear and a crack with small splinters where the back button is
Would replacing the digitizer be enough?
Thanks