Related
Does anyone know of any way you can use the webtop adapter on a laptop? I plug it in via HDMI and nothing happens. can you only use this on a tv/monitor?
Jtblkice said:
can you only use this on a tv/monitor?
Click to expand...
Click to collapse
Yep.
Your laptop only has an HDMI out.
webtop adapter
what exacly is the webtop adapeter
how do you use it if you hook it up to a tv without a keyboard or mouse? is there any way to navigate through or do you need a keyboard and mouse? I saw a video with the atrix had a hack to hook it up and it turned the phone into a mouse and such....wondering if that happens at all or not
jpen said:
how do you use it if you hook it up to a tv without a keyboard or mouse? is there any way to navigate through or do you need a keyboard and mouse? I saw a video with the atrix had a hack to hook it up and it turned the phone into a mouse and such....wondering if that happens at all or not
Click to expand...
Click to collapse
at the vzw store the adapter has 2 more usb ports on it and the rep was saying you could use those ports to put the wireless adapters in to make a keyboard and mouse work. not sure if it works i just overheard the convo between him and a customer.
Jtblkice said:
Does anyone know of any way you can use the webtop adapter on a laptop? I plug it in via HDMI and nothing happens. can you only use this on a tv/monitor?
Click to expand...
Click to collapse
I think a better question is this:
Where did you find a laptop with an HDMI INPUT?
Banggugyangu said:
I think a better question is this:
Where did you find a laptop with an HDMI INPUT?
Click to expand...
Click to collapse
He didn't. He plugged his phone's hdmi cable into his laptop's hdmi port. It's the same port on either end.
jpen said:
how do you use it if you hook it up to a tv without a keyboard or mouse? is there any way to navigate through or do you need a keyboard and mouse? I saw a video with the atrix had a hack to hook it up and it turned the phone into a mouse and such....wondering if that happens at all or not
Click to expand...
Click to collapse
If you plug it into the tv without the hack to enable webtop, without the webtop adapter, you get a "remote" screen on phone, which runs the media player. If the webtop adapter does what I think it will do, it will make the phone's screen work like the touchpad on your laptop, and give you a button to bring up the keyboard, which is what the Atrix does with the webtop hack. You can also tether a bluetooth keyboard and mouse to the phone.
barry99705 said:
He didn't. He plugged his phone's hdmi cable into his laptop's hdmi port. It's the same port on either end.
If you plug it into the tv without the hack to enable webtop, without the webtop adapter, you get a "remote" screen on phone, which runs the media player. If the webtop adapter does what I think it will do, it will make the phone's screen work like the touchpad on your laptop, and give you a button to bring up the keyboard, which is what the Atrix does with the webtop hack. You can also tether a bluetooth keyboard and mouse to the phone.
Click to expand...
Click to collapse
Thats what I was hoping to hear....I want to buy the adapter but I'm afraid someone will come out with the hack as soon as i do.
Banggugyangu said:
I think a better question is this:
Where did you find a laptop with an HDMI INPUT?
Click to expand...
Click to collapse
Sent from my DROID BIONIC using XDA App
I have a Lenovo with an HDMI port.
Any finding anything interesting about the adapter. VZW rep gave me one at a discount for a problem with my bill.
With the ammount of money ans headaches you would spend to do be able to do that, you're probably better off just trying to find the docking station for the bionic and selling your laptop.
FYI, the Droid BIONIC Support Bluetooth Keyboard & Mouse.
I Use the same on I use for my Tablet.
but here's a keyboard made by moto. A co-worker has it, and he loves it he says
http://www.motorola.com/Consumers/U...ess-Accessories/Atrix-Wireless-Keyboard-US-EN
Pretty sure there is software out there than does it... But its only the size of the phone screen... Look in google code
Has anyone cracked open a Webtop adapter yet to actually see what is inside?
Considering there is that cardock hack which was pretty much just drilling a hole and adding a micro-HDMI cable, the only thing triggering Webtop vs. mirroring mode might be a magnet.
I would love to find that out to be true. A four dollar cable from ebay is a lot better than the 30$? they charge for the adapter....
Just wondering, since some of the newer tablets let you hook up mini usb devices to it and so. Was wondering if there had been any adapters yet or so for us streak 7 users? Would be cool to get a wired controller hooked up and so.
You would need an OTG cable to do that, as dell doesnt make any you will have to make your own or use the HDMI dock.
Well I have the HDMI Dock, so I could use the dock then insert the usb device to that? Was thinking about getting that Logitech F710 with that usb dongle, heard it had support for android. What else would I need? Or hows that work fully.
As for the non dock part, has anyone made a cable yet to work?
if your device had a usb-a connector you have no choice then but to make a cable.
the sixaxis/ds3 uses a mini usb connector and might work though usb,
I know it and the wiimote will work over bt, with the wiimote being the easier to pair one.
Well I have the wiimote working fine, Issue there is.. Yea.. Battery drain on that remote. So figured maybe getting a adapter. I guess I need a USB to Mini micro usb? (The new style mini usb thing.. man I miss the old big RAZR size ones) How many of you have used a HID device or so on android or the streak 7?
you'd need to splice together the dock connector to preferably a USB-A female port, it'd be the most useful as you'd have a cable that could accept anything, but it'd mean you'd always need a minimum of 2 cables.
You'd also have to dissemble to dock connector itself i believe as the OTG pins are different from what's wired in the normal sync/charge cables, you cant simply cut the cable and rewire it, you'd prob have to cut the dock connector open and resolder
If you made a dock to micro usb connector it'd only accept devices that have a micro usb port on it.
Keep in mind usb mode means that the controller would be drawing power from the device itself, while controllers dont draw that much, it's still something to point out
Wouldnt this be all I need?
http://www.amazon.com/USB-Female-Mini-Male-Adapter/dp/B0016RNX2I/ref=pd_sbs_e_4
Would take the normal size usb dongle or cord, fits into the USB slot of the dock itself.
I havnt actually tried it but it sounds like that should work, i know that port is designed for otg connections so i'd assume it'd take care of the hard work.
When on 2.2.2 Did I need a special program for this to work? I know 3.x had native support. Just wondering. =) (Or can any game/emulator with key remapping auto detect)
if it's anything like the hoops needed for the s5 on 2.2.x yes, unless dell included their own code stuff to make it work, then i'm not sure.
I've never attached a controller to anything, wired or not so I can only say that much
Wonder what the app would be called or so, anyone know? I mean I ordered the part, should be here in a few days, then I can report any tests I have with a Rumblepad 2.
Ok tested it out, So far nada. Dont know if its even supposed to work.
Has anyone here hooked a wired controller up to their android? Running Honeycomb now too.
I know people talk about the F710, which I wonder if that works cause its battery powered?
So what's the verdict guys? Can a controller or other USB device be connected to the mini USB port on the docking station and work? If not, will it work if you plug in a mini USB OTG cable (like this one http://www.ebay.com/itm/Mini-USB-Re...757?pt=LH_DefaultDomain_0&hash=item3a6edf5335) into the docking station and then plug the controller into the OTG cable?
So far my verdict is nada.. dont think its supplying power to the usb ports. Now its been said that adapter based ones may work, something where controller is powered by batteries. Tho again. No one ever gives a real confirm.
My next area to branch out is http://www.onlive.com/controller 50$ but you can use a adapter for the pc. However it also works with bluetooth, something that the tablet DOES support and no adapter needed. Since I have the onlive app, least it will work 100% for THAT. Once my tax money comes in, Ill order the controller and see if it can work on emulators and so too. least then we will have 1 solid answer that has some good use. (Since honestly, onlive on the tablet really isnt bad at all!)
Why not bluetooth your ps3 controller though the sixaxis app on the market thats what I've done works great
Sent from my Dell Streak 7 using xda app-developers app
I have used my Wii remote that way
Sent from my Nexus 7 using Tapatalk 2
To answer both. If I am not mistaken. PS3 controllers have to be "paired". Which means when you wanna play PS3 or Tablet.. got to re-pair them all the time, correct?
Wii-Motes I know you dont have to re-pair them. However.. one thing I hate... that to use the classic controller.. you need to have the Wiimote laying around somewhere.. then the cable for classic. Seems bulky for normal use.
Both controllers all are battery too. Would be nice for wired solutions. If I do anything wireless, I may as well get that Onlive controller with BT support.
If you have a sixaxis/DS3 dedicated to non-ps3 use: you only have to re-pair it every time you want to use it on a different device.
The sixaxis/ds3 do work in usb mode, at least on pcs. I dont recall if there's a solution to use it in usb mode on android (though i'd imagine it should, as usb mode is trivial to enable)
If you only have a single device to use it with, you only ever need to pair it once and then you're done.
Well, I finally went and tried hooking up a usb hub to my S7, and my results were absolute failures.
I bought an OTG <-> dell 30 pin a while back and a standard OTG <-> dock cable.
I dont have a baseline as I dont know offhand which kernels are specifically tested to work.
It seems to enable the hub (by enable I mean it powers up on detection of a host, it's wall powered)
on my S5 with ICS/Phoenix kernal (which is known to support usb hosting), but nada on my S7 with ICS B4/mod and stock 514.
Can anyone explicitly confirm that the b4 and stock kernals work with host?
I'm pretty sure nothing is happening on either of those, and as it works fine on my S7 it's definitely not bad cables/hardware.
Edit: at least the S5 is even capable of powering the hub itself, and with a dock it can charge at the same time. If it wernt for the terrible HDMI out on it, it would be a full on android pc with the dock.
The S7 on the other hand: I still cant get anything, remotely powered or self powered: it gives no response
I can tell you, yes, ICS kernel does have otg drivers but may not provide power to those devices.
Sent from my Nexus 7 using Tapatalk 2
Hi,
I just received an OEM Micro USB to HDMI adapter today.
I connected my Note to the adapter and then to the HDMI cable of my TV.
Unfortunately there is no HDMI signal on the TV side.
Now, I don't know howto activate TV output on the Note. I don't even know if that's possible.
Can anyone guide me on how to activate HDMI output on the Galaxy Note ?
Should I make any settings ?
Should I play a video ? (or would it give out video from HDMI even at home screen ?)
Should I power the phone and/or the HDMI adapter through USB ?
Thanks.
mrmrmrmr said:
Hi,
I just received an OEM Micro USB to HDMI adapter today.
I connected my Note to the adapter and then to the HDMI cable of my TV.
Unfortunately there is no HDMI signal on the TV side.
Now, I don't know howto activate TV output on the Note. I don't even know if that's possible.
Can anyone guide me on how to activate HDMI output on the Galaxy Note ?
Should I make any settings ?
Should I play a video ? (or would it give out video from HDMI even at home screen ?)
Should I power the phone and/or the HDMI adapter through USB ?
Thanks.
Click to expand...
Click to collapse
Connect HDMI cable to MHL adapter, and other end into TV. (duh...)
Plug your charger cable into the MHL adapter. (output won't work without this)
Plug your MHL adapter into Note. (no configuring required!)
Everything you do on your Note will be mirrored on your TV/Screen, at the Note's native 1280x800 resolution. Plain and simple!
Video's that are played via the MHL adapter will be played at their own native resolution, up to and including 1080p.
Enjoy!
thank you.
it doesn't work unfortunately.
maybe my adapter is not working but it passes power through USB.
how can I understand if it really doesn't pass HDMI ?
mrmrmrmr said:
thank you.
it doesn't work unfortunately.
maybe my adapter is not working but it passes power through USB.
how can I understand if it really doesn't pass HDMI ?
Click to expand...
Click to collapse
It's possible that you have a faulty adapter. It should just be plug and play, but you have to make sure that the adapter is receiving external USB power in order for it to work.
ok; it works now.
the micro USB connector was not fully connected...
thanks.
Similar issue
Hi, me to facing similar issue. The MHL adapter when connected does not show any notification on the screen. The only thing it does is charging the phone. Does it mean its a faulty adapter?
i hope i am answering my own question but still if there is anything which i may be missing here
mesmerisor said:
Hi, me to facing similar issue. The MHL adapter when connected does not show any notification on the screen. The only thing it does is charging the phone. Does it mean its a faulty adapter?
i hope i am answering my own question but still if there is anything which i may be missing here
Click to expand...
Click to collapse
and what rom and kernel are you on ?
I'm on stock running ICS and I get funky results, sometimes it works for a minute or two sometimes just a few seconds. The problem seems to be on the TV, a Sony Bravia, the HDMI setting has to be Wide for picture quality (it has zoom, smart zoom, wide, 16:9 and 4:3) but as soon as there is some glitch in receiving data from the phone the TV begins to scroll through those settings to regain a signal and I can't force a setting on wide for the HDMI connector, only for one of the SCART connectors.
The frustrating part is that it works flawlessly when I connect an Asus Transformer. Could it be the MHL's USB connector? If that is the case how can I check it?
Sent from my GT-N7000 using Tapatalk 2
Just in case anyone relooks this up.
Connect everything. Then REBOOT PHONE/NOTE. The TV will then detect it auto.
Hope this helps someone !!
It didnt help me... my sony bravia 32" tv just wont show the gnote's video. the same adapter works fine on my samsung 32" tv but not on the sony. I have even upgarded the sony tv's firmware too. tried changing to "Wide Zoom" settings and other things but still no video showing, although the tv does know there is something plugged in to HDMI port 1.
Anyone else got ideas?
Samsung doesn't like sony!
sonhy said:
Anyone else got ideas?
Click to expand...
Click to collapse
lol, just don't try that any sony device to work together with another samsung device, this is a general rule for electronic trademarks.
*Frankly my friend, I lost a complete day trying my sony ericcson bt handset to work with my note, no success at all, so, I just bought a samsung one and everything gone well.
that sux, bluetooth is a standard and im sure there are no variants... they are cheap, so i will buy another one from ebay and see if it is bcos of the adpater and not the TV.
zopilote said:
lol, just don't try that any sony device to work together with another samsung device, this is a general rule for electronic trademarks.
*Frankly my friend, I lost a complete day trying my sony ericcson bt handset to work with my note, no success at all, so, I just bought a samsung one and everything gone well.
Click to expand...
Click to collapse
That is strange I have the MW-600 unit and it works fine with my Note, Despite, Galaxy Tab2 and Asus Transformer.
Sent from my GT-N7000 using Tapatalk 2
chappatti said:
Just in case anyone relooks this up.
Connect everything. Then REBOOT PHONE/NOTE. The TV will then detect it auto.
Click to expand...
Click to collapse
This did help me using a Galaxy Note and a cheap no-name MHL adapter I bought of eBay. Had it connected to the HDMI input on my Dell WFP3008 monitor.
mhl n7000 camera not starting when connected
hi sorry for posting after 4 years on this thread. is the camera or camera using apps (like skype) working for anyone when the phone is coonected and displaying through mhl to tv? because whenever i try to use camera when i am connected it is not working. on stock 4.1.2. thank you
Has anyone tried using the GN2 with a Smart Dock in combination with an Atrix Lapdock?
Swyped from the closest Galaxy.
You will need a micro hdmi adapter. It will and can work, but it will simply mirror the display of your phone.
I've seen the same question asked on the S3 forums. People have even hooked up PS3's to their lapdocks.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Yes, some sort of adapter would be needed to connect the HDMI from the Smart Dock to the Lapdock. The keyboard and trackpad should work, though, so it will do more than mirror the display, I believe.
Swyped from the closest Galaxy.
Anyone able to make lapdock work with Note 2?
Also any idea where I could pick a Atrix Lapdock up?
OwenW71 said:
Yes, some sort of adapter would be needed to connect the HDMI from the Smart Dock to the Lapdock. The keyboard and trackpad should work, though, so it will do more than mirror the display, I believe.
Swyped from the closest Galaxy.
Click to expand...
Click to collapse
uhhh, dont see why the keyboard and trackpad would work from a hdmi connection alone. you'd need to connect the usb as well to enable input. then it just mirrors the display and lets you use keyboard and trackpad.
it wont give you the full atrix lapdock software suite as that was installed on the atrix itself, not on the dock.
Keyboard and track pad should work since smartdock uses 11 pin to use both HDMI and USB OTG. Has any one tried?
If we could somehow hack the power, by patching the microUSB out of lapdock, we could potentially have a stand alone laptop. Any ideas? do any experts think it is feasible?
Souai said:
uhhh, dont see why the keyboard and trackpad would work from a hdmi connection alone. you'd need to connect the usb as well to enable input. then it just mirrors the display and lets you use keyboard and trackpad.
it wont give you the full atrix lapdock software suite as that was installed on the atrix itself, not on the dock.
Click to expand...
Click to collapse
nipuna said:
Keyboard and track pad should work since smartdock uses 11 pin to use both HDMI and USB OTG. Has any one tried?
If we could somehow hack the power, by patching the microUSB out of lapdock, we could potentially have a stand alone laptop. Any ideas? do any experts think it is feasible?
Click to expand...
Click to collapse
It should work fine, but I don't own one to test with. The basic idea is to build/buy adapters to connect things up with. If you have a SmartDock, that will get the phone side handled. Do a google for people using the lapdock with Raspberry Pi boards. They have all the details for interfacing to it. I think they even power the Pi with the battery in the lapdock, so you could charge your phone with it if the SmartDock allows for that, which I think it does. At the end of the day, the lapdock is a pretty "dumb" device, it takes standard inputs like HDMI/USB, and doesn't seem to have anything to restrict it to working only with the Atrix.
Not sure if this has already been discussed/discovered, but will it be possible to use the new Nexus dock "and" an OTG cable at the same time? It seems feasible given that the dock charges the device using the pin connectors which frees up the USB port.
One possible problem is that the dock also acts as a passthrough for data/audio so there may be a problem with the tablet trying to reconcile both sources trying to have simultaneous access.
I ask because it would be nice to be able to charge my Nexus 7 and utilize an OTG cable (for storage drives and game controllers) at the same time. I know there is an OTG Y-cable solution, but that involves rooting the tablet.
Has anyone already explored the possibilities of this combination?
Xenoterran said:
Not sure if this has already been discussed/discovered, but will it be possible to use the new Nexus dock "and" an OTG cable at the same time? It seems feasible given that the dock charges the device using the pin connectors which frees up the USB port.
One possible problem is that the dock also acts as a passthrough for data/audio so there may be a problem with the tablet trying to reconcile both sources trying to have simultaneous access.
I ask because it would be nice to be able to charge my Nexus 7 and utilize an OTG cable (for storage drives and game controllers) at the same time. I know there is an OTG Y-cable solution, but that involves rooting the tablet.
Has anyone already explored the possibilities of this combination?
Click to expand...
Click to collapse
I read somewhere else that while docked, the device doesn't react to an OTG cable. This is just what I've heard, haven't seen it confirmed.
This guy did something similar, and the results are evident: Dock point is useless! Charge and OTG can not be carried out simultaneously!
Would be nice to know, if Timurs kernel, which allows charging and multiple USB would solve this. Have no dock, so I can not check. What I would like to have is something like the magnetic pogo charger which is annonced for Nexus 10.