Hello.
I just came from CarbonRom Nightly Build (4.2.2 - XXLSO) and now I wanted to get the stock rom again!
I did the instructions listed here:
http://forum.xda-developers.com/showthread.php?t=1424997
IGNORE
1.b Final Installation
- Download ROM, and extract it to .tar file
- Download Odin, open it
- select PDA tab and point to ROM file. Leave Re-partition, pit, CSC, Phone tab unticked (see Image below)
- Switch off device, Put in download mode (Vol down + Home + Power)
- completely close kies, Anti virus if running
- Connect device to PC
- ID com port shud turn yellow (not shown in image)
Now hit Start
Click to expand...
Click to collapse
i used N7000XXLSZ N7000OXALSZ - Germany.
My Rom history:
GB 2.3.5 (worked!)
OTA 4.0.3 (worked!)
OTA 4.0.4 (worked!)
root with temporary CWM (worked!)
updated on 4.2.1 SuperNexus (hydra kernel) (worked!)
flashed Philz Kernel and 4.1.1 TW dump (worked!)
flashed Philz XXLSZ Kernel and the original OTA update 4.1.2 XXLSZ trough odin (worked!)
flashed CarbonRom 4.2.2 XXLSZ (worked!)
wanted to flash the stock 4.1.2 - didn't work - (soft brick)
friend suggested to first flash a safe kernel again, i think it worked because of the yellow triangle? but i still cant boot in cwm
i still have acces to the download mode but it doesnt boot neither in recovery nor normal boot (boot loop)need instructions please fast!
Click to expand...
Click to collapse
okay i managed to flash an extisting rom i had on my SD card trough CWM.
Its BurtRom LSC now, can I now just flash the original (LSO / LSZ) one trough odin ?
mindfck1337 said:
okay i managed to flash an extisting rom i had on my SD card trough CWM.
Its BurtRom LSC now, can I now just flash the original (LSO / LSZ) one trough odin ?
Click to expand...
Click to collapse
Hi,
Yes, but you probably will get the yellow triangle, you can remove it later tho with "triangle away".
... anyway, you can have the latest stock tw rom versions from Thaidai Pristine's thread or Eybee's stock reloaded via CWM without having to return to those versions you mentioned on Odin... just a suggestion. Hope this helps.
Related
Hi All,
My galaxy note is stuck on the Samsung logo and just hangs there.
some info on what I did.
My phone has been rooted (this has been done a while now still on stock rom)
I put phone back to factory settings (as wanted to start fresh) all was fine still rooted
I got a pop-up message about a update so I installed the update phone rebooted
Then I got another message about a update think it was kernel file update
phone rebooted
Then I got another message about android 4 so installed this phone rebooted and now it just hangs when it gets to the Samsung logo.
I can get into recovery mode.
Any ideas what I should do?
I have done lots of searches but did not want to make things worse (if possible)
Should I try and flash ICS using Odin3 v1.85?
Or should I just send phone back to Samsung?
Flash a stock Gingerbread Rom using PC Odin.Then,if you want you can update to official ICS without rooting or root GB and flash custom ROMS.
Dont wipe anything from the default kernel CWM, see if your storage can connect to PC, if yes then copy CF kernel 5.6 lq3 and Abyss kernel 4.2 and flash Abyss kernel first and go to advance reboot recovery, then do full wipe, then flash CF kernel 5.6 lq3
Hi Thanks for the replies
I checked and I can go into recovery and access the sd card
I could not find the kernels you mentioned do you have a link to them
also when I have flashed both kernels will I then have to flash a rom?
maybe the ginger bread one like NoRmAlY_CrAzY said
I found this one that am downloading
N7000XXKKA ------ 2.3.6 2011 November------- N7000CPWKK3 -----------United Kingdom (Carphone Warehouse)
Should I flash that?
-------
ok I flashed the ginger bread rom using rom Odin and its working i'll have to root again now i'll have to go read some threads about updating to ICS
Thanks Angie
First of all, HI guys and sorry for my irregular english.
I read since a long time XDA Forums to prepare me in flash and root methods for my galaxy note.
At now, i'm using this stock rom:
[ICS][4.0.3][Stock][OpenGermany]N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5
+
CF-Root-SGN_XX_OXA_LPY-v5.6-CWM5.tar + SuperSU
but i came from a stock rom: N7000UBKK2 with default kernel KK1 from Samsung and Movistar. and i have only a nandroid backup of my default Samsung/Movistar rom.
I have another gingerbread samsung stock rom, for emergency cases:
N7000UBKK8_N7000WEKK1_N7000PETKK1_HOME.tar.md5
But my point is:
I wish test some roms, before to decide which one use in dual boot system:
- Stock 4.0.4 (LRG or you suggest me LRK or another more recent ?)
- AOKP
- Criskelo
- Chrack
- Paranoid
- Cyanogen 9
And i have ready to use: Odin 1.87, Odin Mobile, SuperSU (if is necesary), Abyss 4.2 (CW/Red) for recovery, Abyss 4.2 CW for odin and CF-Root for LRG (if is necesary i can find one for LRK or another recent)
But i'm confused about how exactly do that. Yes i know there are many... MANY topics about that but, I only need a bit of help guys to understand the exactly process and avoid EMMC BUG...
If i understant correctly, i must follow this method, please correct me if i'm grong:
01 - Check if i'm root and settings are in depuration + unkown sources
02 - Because i'm using an ICS Kernel i need first downgrade to Abyss for continue
03 - Reboot in Recovery and flash Abyss4.2 CW/Red, after "reboot recovery" and make wipes
Which one should i use for this CW or Red Version?
...
But after this i have problems, because i have ever red: before flash a custom rom you need a same base. Then ok i think for use for example CM9, or Paranoid, or Criskelo, I need a 4.0.4 rom then i have a:
[ICS][4.0.4][Stock][OpenGermany]N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5
Ready to flash but...
If a this moment following the previous steps, i'm in recovery of Abyss CW/Red:
Should i reboot using this Abyss kernel in download mode to flash a stock LRG ?
...
Or in another reality, is not needed flash Abyss to flash a stock rom using Odin ?
I wish first test the Stock 4.0.4 before any other custom to make a base point of comparison
...
And after, using 4.0.4 LRG + CF-Root, is safe use install from zip file in recovery to flash any other rom like CM9 for example ? or i need use abyss recovery (before flash it using CR-Root recovery) to flash any other rom (ICS) ?
Again i hope you can help me with these questions, and really sorry is the text is so long but i prefeer to know rightly how to procced before brick my phone, because i still waiting for a JIG (you know, for emergency...)
Tnks to all.
First of All You need to know that there is no need for the same base to flash the ROM.
Second thing You have to use Abyss Redpill 4.2 Original Logo Recovery(It uses GB Kernel) If you are not going to downgrade to GB and want to flash on top of your current ROM
Third Whenever you want to flash CM9/AOKP/AOSP first downgrade to GB(Pre rooted Rom) OR GB then Root it and then flash the rom by going it to CWM recovery.
Fourth thing is Never flash Abyss using PC Odin.
Proper Way to Flash CM9/AOSP/AOKP for a clean install (You will lose data)
Download a prerooted GB Rom from here ===> http://forum.xda-developers.com/showthread.php?t=1424997
Reboot your phone is Download Mode. (Vol Down+Home+Power)
Open Pc Odin on your Pc/Laptop
Connect your phone to PC via USB Cable
A Small Box in Left Upper turns Yellow.It means your phone is recognized by Odin
Now Select GB File under PDA Tab (Do not change any settings)
Start Flash
YOU WILL HAVE A GB ROM ON YOUR PHONE WITH ROOT
Now Go to Recovery
Install Zip from SD Card
Flash Rom
Flash Gapps
Do All 3 Wipes (Cache/Dalvik/Data)
Reboot System.
you might wanna root first and backup efs before jumping to any rom that is different csc then you previous one.
Sent from my GT-N7000 using Tapatalk 2
Tnks to all, at now i'm testing some roms and kernels, looking for a "perfect" mate for my paranoid android (tableted rom), and in my tests i still looking for a decent kernel because (may this is my imagination but...) CF-Root LRG kernel in LRK Rom (Chrack's Rom) consume excessively batery but i will test in an ordinary day because may is not problem from rom, this should be a problem from kernel...
I read before: SpeedMod kernel was developed just for this situation: low batery comsumption + high perfomance...
Hi, I used cm9.1 for a week but was disappointed with it's battery life, so i decided to try cm10 nightly. I did the CWM backup but after that i entered boot cycle and cannot boot to recovery now. Boot to download works fine, so what are my options now? Should i flash a stock rom and try flashing cm10 nigtly after that?
Edit: Managed to get recovery working but the recovery file itself doesn't work.
Try flashing Semaphore kernel for ICS via Odin, it may boot properly or it could get you to CWM, then you could flash a ROM... If not, download this http://d-h.st/4nP , it's pack of 3-file stock jw5 value pack, pit512, cf-root and Odin, flash it (if u know how), then just flash cm10 or cm9.1, your choice, there shouldn't be any problem
Thanks alot! Worked in the second attempt (the semaphore flashing)
I was upgrading from 9.0rc2 to 9.1 and encountered the same problem; could not get my phone into recovery mode, only download mode. Flashing Semaphore ICS 1.3.0 using Odin3 got my phone booting again without losing any data, settings or apps
Ajoslaf said:
Try flashing Semaphore kernel for ICS via Odin, it may boot properly or it could get you to CWM, then you could flash a ROM... If not, download thi , it's pack of 3-file stock jw5 value pack, pit512, cf-root and Odin, flash it (if u know how), then just flash cm10 or cm9.1, your choice, there shouldn't be any problem
Click to expand...
Click to collapse
thank you!!!
Currently running Ultimate N700 XXLSC JellyBean 4.1.2 v5.1 and baseband N7000XXLSC and Kernal Version 3.0.31-593490. I want to return it to stock as I can't use Sky Go. Do I need to downgrade to ICS or GB? any links to files would be great trying to do this whilst sat at my desk at work today so can't spend alot of time searching the forums
you can download the stock ICS firmware from samfirmware.com and install it using PC odin. (dont do any wipes while on stock ICS kernel. )
after install using Odin you might need to do a factory reset to get the phone to boot properly.. that time install Philz kernel for the ICS rom you chose using stock recovery/
Stock ICS roms: forum.xda-developers.com/showthread.php?t=1896696
Philz kernel: forum.xda-developers.com/showthread.php?t=1901191
nokiamodeln91 said:
you can download the stock ICS firmware from samfirmware.com and install it using PC odin. (dont do any wipes while on stock ICS kernel. )
after install using Odin you might need to do a factory reset to get the phone to boot properly.. that time install Philz kernel for the ICS rom you chose using stock recovery/
Stock ICS roms: forum.xda-developers.com/showthread.php?t=1896696
Philz kernel: forum.xda-developers.com/showthread.php?t=1901191
Click to expand...
Click to collapse
Should I not download a Gingerbread stock rom 1st and then upgrade to ICS via OTA?
Spendy said:
Should I not download a Gingerbread stock rom 1st and then upgrade to ICS via OTA?
Click to expand...
Click to collapse
Not necessary but possible. Downloading and using a ICS-based stock Rom saves a bit of time and work.
But for SkyGo (in UK) you have to stay with the unchanged stock - or SkyGo won't work.
I recently use my old GT-N7000 back (stock Android 4.0.4 ICS). I rooted the phone and installed CWM 6.0.1.4 via odin. After that i tried to flash KitKat ROM but failed - i found out that this was because of my CWM obsolete (based on ics) and incapable to flash KitKat ROM.
I tried to flash an updated recovery via odin but failed. Now i'm stuck with boot logo and only able to open recovery mode and download mode. I don't think this is eMMC bug (right?)
Is it the reason odin unable to flash new CWM is because my kernel is still based 4.0.4? and any other way for me to get out of this bootloop?
muaz9768 said:
I recently use my old GT-N7000 back (stock Android 4.0.4 ICS). I rooted the phone and installed CWM 6.0.1.4 via odin. After that i tried to flash KitKat ROM but failed - i found out that this was because of my CWM obsolete (based on ics) and incapable to flash KitKat ROM.
I tried to flash an updated recovery via odin but failed. Now i'm stuck with boot logo and only able to open recovery mode and download mode. I don't think this is eMMC bug (right?)
Is it the reason odin unable to flash new CWM is because my kernel is still based 4.0.4? and any other way for me to get out of this bootloop?
Click to expand...
Click to collapse
What "updated' vers of CWM r u referring to? CWM? TWRP? Phils?
All KK Roms need at least 6.0.4.5+ to flash. There's a sticky guide here that guides u step by step. Did you read this?
Jackwu696 said:
What "updated' vers of CWM r u referring to? CWM? TWRP? Phils?
All KK Roms need at least 6.0.4.5+ to flash. There's a sticky guide here that guides u step by step. Did you read this?
Click to expand...
Click to collapse
sorry for the late reply. My problem was solved (i found the guides and realised that i skipped one step - to flash a kernel which also comes with KK -compatible recovery)
thanks for the help :fingers-crossed: