Database Develop

[Q] My G-note got crashed, please help me...

My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.

musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping.. i dont know if xxls2 kernel is brick free or not. but stucking at samsung logo has always been solved by fullwipe factory in my case

mistajoe83 said:
stuck in Samsung logo just mean you need to just fullwipe factory in CMW. but be sure you are on safe kernel such as Speedmode or Hydracore before wiping..
Click to expand...
Click to collapse
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.

musheercmr said:
My G-note (N7000) got crashed, please help me…………
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes

rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
that is correct. takes times. but if you waited more than 10 minutes try flashing other rom.. safest method is pc odin.

rajsekhar.300 said:
It takes some time to boot up after you flash a rom..just wait for few minutes and see if it boots up
And how did you flash the rom..i mean what rom,kernel and did you do the wipes
Click to expand...
Click to collapse
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin

musheercmr said:
I did full wipe but still the same .
and now how can i load safe kernel? or any other advise to fix ?
thank you.
Click to expand...
Click to collapse
tell us how you flash it. via PC ODIN or ClockWorkMOD.?
as for the kernel if you have Extrnal sdcard then download SpeedMod 3-15 or Hydracore kernel than put that in your external Sdcard. Open CMW than flash the kernel then go to advance>reboot recovery.. wait for recovery rebooted than you are safe to flash other rom.
---------- Post added at 07:28 AM ---------- Previous post was at 07:20 AM ----------
look here.. theres a tutorial of flashing with PC ODIN + Firmware download..
the instruction is detailed and clear.. this should help you the most.
http://forum.xda-developers.com/showthread.php?t=1424997

musheercmr said:
I was waiting more than a hours and i tried to Flash ICS by odin-3, that one also failed
i was in N7000DDLR9 ROM. then i flash N7000XXLS2 by mobi-odin
Click to expand...
Click to collapse
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2

rajsekhar.300 said:
How could you flash xxls2(jb leak) using pc odin..you need to do it using cwm
And what kernel were u on when you flashed xxls2
Click to expand...
Click to collapse
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...

musheercmr said:
finally i got installed ICS 4.0.4 (N7000DDLR6) by PC-Odin. thank you guys.
So from now, can you please advise, how can i flash JB (N7000XXLS2 LEAK). @ present my phone is not rooted. and running on fully stoke ROM N7000DDLR6. advise please...
Click to expand...
Click to collapse
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm

rajsekhar.300 said:
First flash a safe kernel(like philz,hydracore or speedmod) and then flash the jb rom through cwm
Click to expand...
Click to collapse
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
look here for tutorial
http://forum.xda-developers.com/showthread.php?t=1329360

mistajoe83 said:
since you flash through PC ODIN means everything is stocked. Means the brick bug is present. you now only have samsung stock recovery and not ClockWorkMod.
if you are planning to install just Samsung Stock Rom then this step is applicable here
http://techie-buzz.com/android/samsung-galaxy-note-jelly-bean-firmware-leaks.html
or
http://din.huluselangor.net/?p=21813&replytocom=5359&wpmp_switcher=mobile
if you are planning install xxls2 custom then you must first root your phone then install CMW and Flash Desired rom with safe kernel installed
Click to expand...
Click to collapse
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?

musheercmr said:
i tried the same as from 1st link, flashing by PC-Odin N7000XXLS2 (LEAK). but giving me FAIL! when i click start
i am using Odin 1.87, is that make any issue ?
Click to expand...
Click to collapse
From where did you download the rom..it it was downloaded from sammobile or from that hotfile link,then you should flash it through pc odin
And if its a custom rom that you downloaded from the xda,then it should be flashed through cwm

the Sam mobile and the hot link are the same. youncan flash the rom using pc odin. but before that put the philz kernel xxls2 in the external sd. so that after the flash using odin, you can boot into recovery and flash that kernel and be safe and do the wipe.

nokiamodeln91 said:
the Sam mobile and the hot link are the same..
Click to expand...
Click to collapse
Yes i know..i said that just to make it clear for the op

Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.

musheercmr said:
Gents, Can you please clarify before I am going to do below. And advise if this is the proper way.
• Flash GB (2.3.6) and wipe
• Then flash ICS (4.0.4)
• Download Notecore (or Speedmod, CF root kernel) kernel and flash by PC-Odin
• Then copy N7000XXLS2 (LEAK) to SD card.
• Boot to CWM recovery, then flash from SD, restart.
Thanks.
Click to expand...
Click to collapse
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm

[email protected]$3K#@R said:
All those steps are correct if you are about to flash a leaked jb rom
If its a leaked custom jb rom,then you need to flash it through cwm
Click to expand...
Click to collapse
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.

musheercmr said:
still am in stuck.
now i have N7000DDLR9 (ICS 4.0.4) without root. then i tried to flash N7000XXLS2 (LEAK) by PC-Odin, i am getting failed.
can you please explain step by step, how do from N7000DDLR9 (without root)
thanks.
Click to expand...
Click to collapse
What was the error you got in the pc odin

paste the odin logs that show failed

[Q] How to root JB XXLSA?

Hi, I have just upgrade my GT-N7000 from rooted ICS to the latest leaked JB XXLSA. I have been looking for the forum but I have no find the answer. How can I root the Rom XXLSA? I suppose that with PC odin, but I'm not sure what kernel should I flash
Thank you

Flash philz 3.71 krenel for xxlsa
Sent from my GT-N7000 using xda app-developers app

VinayakG30 said:
Flash philz 3.71 krenel for xxlsa
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
i install ''PhilZ-cwm6-XXLSA-XJB-3.71.tar'' but no acsess root permission why? Cuz i can acsess cwm and when opening phone i see yellow triangle but ma phone say no acsess root permission. What your suggest?

install a super-su but nothing is change and i can't open super su. it's wanna root permission What can i do?

Install the zip version of the kernel using recovery not the tar version. You have flashed the tar version from PC Odin thats why you have a yellow triangle

Worked fine for me
I've been hunting for this information for ages having managed to brick my Note trying to install PA - thanks for the info - simple and to the point!
..and yep it worked!
nokiamodeln91 said:
Install the zip version of the kernel using recovery not the tar version. You have flashed the tar version from PC Odin thats why you have a yellow triangle
Click to expand...
Click to collapse

Hi, I am running XXLSA also and would like to Root it. Do you know a link with the step-by-step guide to rooting and upgrading XXLSA to the latest ROM version? Thanks!

rykel98 said:
Hi, I am running XXLSA also and would like to Root it. Do you know a link with the step-by-step guide to rooting and upgrading XXLSA to the latest ROM version? Thanks!
Click to expand...
Click to collapse
Step-by-step guide: stop using/upgrading a leak, start using the offical JB releases from scratch.
a) Install a JB stock Rom with PC Odin and root it with Phil's Kernel, or
b) Install a Custom Rom from recovery (after installing Phil's Kernel in stock recovery and rebooting into it again)

ThaiDai said:
Step-by-step guide: stop using/upgrading a leak, start using the offical JB releases from scratch.
a) Install a JB stock Rom with PC Odin and root it with Phil's Kernel, or
b) Install a Custom Rom from recovery (after installing Phil's Kernel in stock recovery and rebooting into it again)
Click to expand...
Click to collapse
Thanks ThaiDai! Where may I find Odin, Phil's Kernel and the Custom ROM? Any links?

rykel98 said:
Thanks ThaiDai! Where may I find Odin, Phil's Kernel and the Custom ROM? Any links?
Click to expand...
Click to collapse
In XDA developers forum you'll find everything because it has a clear structure of subforums and a fantastic search engine.
One more hint: you are already in one of the subforums you'll need - you'll only have to go one step up and use the two round things near your nose.

ThaiDai said:
Step-by-step guide: stop using/upgrading a leak, start using the offical JB releases from scratch.
a) Install a JB stock Rom with PC Odin and root it with Phil's Kernel, or
b) Install a Custom Rom from recovery (after installing Phil's Kernel in stock recovery and rebooting into it again)
Click to expand...
Click to collapse
Can I upgrade from XXLSA to XXLT4 with this method? I.E. can I install PhilZ XXLT4 kernel and then any XXLT4 rom with this method?

SpaffyXE said:
Can I upgrade from XXLSA to XXLT4 with this method? I.E. can I install PhilZ XXLT4 kernel and then any XXLT4 rom with this method?
Click to expand...
Click to collapse
Yes. Download philz kernel (zip file) go to recovery flash the zip file. Go back to recovery do the wipes. Download XXLT4 or XXLT5 and put the phone into download mode and flash XXLT4 or 5 using Odin. Once successfull, flash philz kernel again from recovery, you will have root and custom recovery.

[Q] Infinite Boot Loop After Installing Custom Recovery

Hi everyone,
I've a problem with my SGS.
I was trying to install my first custom rom on the stock android 2.3.6 - CM10 following the WIKI.
After I've installed as suggested Heimdall, I've tried to install hardcore's ClockworkMod Recovery but once I've typed the command "heimdall flash --kernel zImage" in the terminal window the phone starts booting up again and again in an infinite loop.
How can i fix the problem?
Thanks for helping
benjollo

benjollo said:
Hi everyone,
I've a problem with my SGS.
I was trying to install my first custom rom on the stock android 2.3.6 - CM10 following the WIKI.
After I've installed as suggested Heimdall, I've tried to install hardcore's ClockworkMod Recovery but once I've typed the command "heimdall flash --kernel zImage" in the terminal window the phone starts booting up again and again in an infinite loop.
How can i fix the problem?
Thanks for helping
benjollo
Click to expand...
Click to collapse
Do you use sgs or sgs+ ?
because i know more things about the sgs+
maybe solution: turn out the battery and then if you can get into recovery mode, flash a cwm recovery zip and an ICS or JB rom
if it doesn't help report back
Greets

It is a SGS.
I've noticed that I can get into ClockworkMod recovery with the 3-buttons combo and i can navigate in the menu or wipe cache and so on.
Is it possible that my problem is due to an wrong firmware? Maybe i should use the multiCSC version?
Where can I find the cwm recovery zip?

benjollo said:
It is a SGS.
I've noticed that I can get into ClockworkMod recovery with the 3-buttons combo and i can navigate in the menu or wipe cache and so on.
Is it possible that my problem is due to an wrong firmware? Maybe i should use the multiCSC version?
Where can I find the cwm recovery zip?
Click to expand...
Click to collapse
when you can get into clockworkmod recovery heimdall finished his job and you can flash cm10 but dont forget wipes
Sent from my GT-I9001 using xda premium

checkout
http://hdtechvideo.com/community/index.php?posts/1412/

Thanks everyone for help and hints!
I managed installing CM10 by reverting to stock firmware with Odin, then reflashing again CF with Odin and at the end installing latest CM10.1 successfully
The only thing I was missing in the first attempt was I haven't installed KIES on the pc (it is new) where i plugged the SGS (I thought that with heimdall i wasn't supposed to install kies) but in order to get Odin working i must install kies.
After kies installation, Odin successfully revert to stock firmware, than CF e than CM10.1
benjollo

[Q] stuck at samsung load screen after flashing PhilZ-cwm6

Hi,
I've just upgraded my Galaxy Note N7000 to stock JB ROM via Kies. The current version now is: N7000DDLSC. After upgrading, I wanted to move to Phil's Kernel, so I downloaded Phil's safe Kernel " DDLSC-ODD" .
However, after flashing Phil's kernel via recovery, my phone is stuck at Samsung's logo. I booted into recovery and can see touch GUI,so Phil's kernal is installed butwhen the phone is turned on it is stuck at samsung logo and I cannot proceed ahead. Once or twice the phone booted but was stuck at lock screen and then restarted again and got stuck at samsung logo again.
Can you please help me out???

did u follow the instructions ？

alvinhaw said:
did u follow the instructions ？
Click to expand...
Click to collapse
Yes, I followed the method correctly. I downloaded the official JB rom yesterday and flashed it using PC Odin. For the time being I am back on official JB ROM and kernel, but want to know if it is safe to flash Phil's kernel or any other JB Kernel ?

Try flashing it again...follow instructions step by step... You shouldn't have that issue.... If it continues you can try a factory reset from Philz recovery
Of it still happens post back here for more helo
Sent from my Samsung Galaxy SV using Tapatalk 3

cooldude200478 said:
Yes, I followed the method correctly. I downloaded the official JB rom yesterday and flashed it using PC Odin. For the time being I am back on official JB ROM and kernel, but want to know if it is safe to flash Phil's kernel or any other JB Kernel ?
Click to expand...
Click to collapse
Not every safe kernal is compatible try to flash philz kernal wif the correct one then using ur external sdcard is better n safe on a phone rather then using pc odin. after u successfully flashed the right kernal n ur phone can start up normally then u can try other kernal as well.
once u flash to a different safe kernal try to make use of the safe kernal function to reboot recovery or reboot system now n update kernal need few mins to update if still stuck on N7000 logo then just go back to recovery n flash back the working kernal.
so far i don't see flashing different kernal is smooth so no point. as philz already mention that the kernal is base on rom built.
---------- Post added at 10:48 AM ---------- Previous post was at 10:35 AM ----------
How to flash safe kernal on stock rom.
Download*xxx-signed.zip*kernel matching your ROM
Put the previously downloaded*xxx-signed.zip*file on your*external*sd card
Boot into stock recovery*(volume up+home+power)
Select*"apply update from external storage".
Now select the*xxx-signed.zip*file
You are rooted + new PhilZ-cwm6 kernel

[Q] Galaxy Note N7000 Firmware Error

Hi all..
My friend encountered this issue recently..
where the phone cannot be started and the firmware error appears.
I've tried several attemps on recovering it back.
1. it cannot go into stock recovery mode
2. it can go into download mode
so i've tried to flash thru odin:
1) philztouch custom recovery
2) stock rom jelly bean from sammobile.com
both attemps failed.
so my next move is to connect thru kies.
it failed again as it does not detect the device to do the emergency phone recovery.
so now im in the idea of trying to flash custom recovery again and a custom rom. do not know whether it works or not, but ill try.
any other solutions/ideas?
Thanks.

Where does the stock JB flash fail? Odin logs? Which version of philz kernel did you try to flash?

nokiamodeln91 said:
Where does the stock JB flash fail? Odin logs? Which version of philz kernel did you try to flash?
Click to expand...
Click to collapse
i cannot remember but it seems that when it comes to the "KERNEL" status appears in the odin box, it took a while n then fails.
PhilZ-cwm6-XXLT9-ORA-5.08.5.tar.md5
this is what i used to flash the philztouch.
any ideas?

cucurr said:
i cannot remember but it seems that when it comes to the "KERNEL" status appears in the odin box, it took a while n then fails.
PhilZ-cwm6-XXLT9-ORA-5.08.5.tar.md5
this is what i used to flash the philztouch.
any ideas?
Click to expand...
Click to collapse
If you cannot get the rom to flash.... You have to go through the philz kernel using odin.. Try to flash philz kernel xxlta version again using odin. Make sure you remove the battery for a couple of seconds. Then boot into odin mode. Use main USB ports and genuine USB cable.