Database Develop

Connect USB Stick

Would it be possible to connect a USB stick to the Diamond by using this adapter ?

Diamond has no USB Host, so no

It would look ridiculous anyway. The Diamond is so small you can afford to carry that AND an Archos anyway. That is what I will do.

Ingvarr said:
Diamond has no USB Host, so no
Click to expand...
Click to collapse
I guess because the hardware doesn't support it??
I had this feature on my Flame, was cool but I didn't use it much. You could even connect KB/mouse!

Ingvarr said:
Diamond has no USB Host, so no
Click to expand...
Click to collapse
I think so too, but as you can see in service manual, htc connects an memory card reader through an Y-USB cradle to read the service-test sd card.
Doesn't that mean that there must be a way to host a device?
(The second one is an ac-adaptor.)
regards

eurofan said:
Would it be possible to connect a USB stick to the Diamond by using this adapter ?
Click to expand...
Click to collapse
Where did you find this USB Stick ?
I am searching for that to use with the Diamond and try it

Here you are:
Intos-USB-Adapter-Adapter-USB-Buchse
cable version
regards

demacus said:
I think so too, but as you can see in service manual, htc connects an memory card reader through an Y-USB cradle to read the service-test sd card.
Doesn't that mean that there must be a way to host a device?
(The second one is an ac-adaptor.)
regards
Click to expand...
Click to collapse
yeah it looks like it works on the picture.
would be nice to be able to add usbstick to our Diamond, for backup and easy install

where did the pic come from? does the diamond recognize the flash drive?

The picture is from the HTC service manual - it shows how to attach the service test sd card to the device.
I think it should recognize the drive, otherwise they couldn't test the device...

demacus said:
The picture is from the HTC service manual - it shows how to attach the service test sd card to the device.
I think it should recognize the drive, otherwise they couldn't test the device...
Click to expand...
Click to collapse
Where can we download it?

xda-dev wiki... like all the other manuals too.

Ok, I must be mistaken here then. Diamond have USB host, at least hardware support for it (unless they have some crossover MC inside this "Y-cable").
Hovewer it seems that it have only limited support in bootloader to load ROM image from memory stick.
Question is if it have the host driver in the Windows Mobile to actually support USB accesses inside WM?

Even soldered myself an y-wire for testing.
Inside Windows Mobile nothing happens when the stick is plugged in. (used an 8GB USB-Stick)
Diamond research section is not so far in the moment, so I don't know how to test if it will work in bootloader mode.
I think they have some electronics switched between device and disk, for access without driver.
edit: removed stupid thoughts, now simple using cat command...
regards

Hi
Is there any progress on this? Do you think we may have usb host for the Diamond at some point in the future?

So, let's push this thread.
I tried to connect an 8GB USB stick throught my self-soldered wire, I've put Diamond into "USB trigger mode" but without any success.
Now we have to figure out which devices can be connected in USB-mode...
I got a few exams in this week, so I'm gonna try at weekend to connect an simple sd card reader.
regards

demacus said:
So, let's push this thread.
I tried to connect an 8GB USB stick throught my self-soldered wire, I've put Diamond into "USB trigger mode" but without any success.
Now we have to figure out which devices can be connected in USB-mode...
I got a few exams in this week, so I'm gonna try at weekend to connect an simple sd card reader.
regards
Click to expand...
Click to collapse
i think you should try a smaller stick...
as i remember there were problems in "window mobiling" with external drives (SD cards..) larger than 1GB

any luck with , would be tops

any progress?... I am looking forward..

http://forum.xda-developers.com/showthread.php?t=413510

[Q] External storage and the nook

So I'm brand new to the world of tablets and Android and whatnot (and, subsequently, this forum, so sorry if this is a dumb question). I'm trying to decide between buying a nook Color (with the intention of rooting) and the Archos 101. I prefer almost everything about the nook, but the 101 can connect to an external hard drive, and that's a big deal, as I'd like to be able to access my documents and video on the fly.
So, with the proper USB adaptor, will the nook support external storage? Thanks!

The hardware should allow it, but AFAIK it doesn't support it out of the box. It shouldn't be TOO much trouble to allow it to. shrug.
others will know much more about this.

10equals2 said:
The hardware should allow it, but AFAIK it doesn't support it out of the box. It shouldn't be TOO much trouble to allow it to. shrug.
others will know much more about this.
Click to expand...
Click to collapse
Yeah, I'm not expecting it to work pre-rooting. I'm just trying to figure out if I'll be able to access the external using a file manager.
Thanks!

Ok, don't quote me on this, but I (think) i remember someone somewhere (not very convincing...) stating that the usb hardware was capable of host and OTG modes.
Android is most definitely capable of dealing with host mode, which is necessary for usb hard drives. So there should be some way of enabling it....
Sorry I'm not much help... I'll do some research and see if its a hidden toggle somewhere, otherwise I'm no help. lol

Any update on this? I'd really like to buy a tablet... but I need to make sure that the hardware can support it.. even if rooting is necessary to make USB port into Host.
If it can't does anyone know of a tablet within the $200-300 range that has USB host capabilities? Would like it to have a separate port for power while USB being used specifically for my 1TB Western Digital My Passport external USB HDD.

Do you actually have 1TB worth of info that has to be accessible on the fly or could you just load what you regularly use onto a larger sd card? I know this isn't an answer to your question but I just wondered how many gigs of documents you have to have access to during the day because the NC can use up to a 32 gig mSD if I remember correctly.

USB mass storage

Hi,
has anyone succeeded to export the internal or external SD storage as a USB mass storage device? The only thing that works for me is MTP under Windows.

Of what I know it's not possible because the phones usb mass storage only supports one drive.
Our phone has two drives, internal and external SD.
Therefore it has to use MTP for you to see the two drives in Windows.
It's the same for all phones with external and internal memory.
Solution: Unmount SD card, rip it out of the frickin phone, ram it into your computer, start copying HD quality movies super fast, rip it out of your computer and showe it back into your phone! Problem?
Sent from my LG-P880

Yes, but I don't like to open the filigree back side too often.
MrWunderbaum said:
Of what I know it's not possible because the phones usb mass storage only supports one drive.
Our phone has two drives, internal and external SD.
Therefore it has to use MTP for you to see the two drives in Windows.
It's the same for all phones with external and internal memory.
Solution: Unmount SD card, rip it out of the frickin phone, ram it into your computer, start copying HD quality movies super fast, rip it out of your computer and showe it back into your phone! Problem?
Sent from my LG-P880
Click to expand...
Click to collapse

Sorry for digging out this old thread. But still better than starting a new one.
I am new to android and the 4X HD is my first android phone. Was using iPhone with PWNtunes, which allows for free file transfers to and from the phone (including music & videos) without using ANY additional software on the other end.
Is there really NO way to activate USB mass storage at least for the external SD card ? I mean, I could like copy the files later to the internal memory, but I really hate the idea that I have to open the phone everytime I want to transfer a file. I can't always mail the files.
I am willing to modify the phone in any way, but I often come across computers where I can NOT install any additional software. Even worse I work with Hardware devices (like my car Stereo or my Set-top-box) where there is no possibility to change the Software.
So USB Mass Storage is the only way to go for me. All the google searches I've done so far point out 2 piece solutions, at best, where I would also need to install software on the PC.
Is there really no standardised solution for this that works on ANY Android ICS (like PWNtunes for any iPhone) ?
I would even pay up to 10 € for this feature, a feature that should be included !

With Total Commander and the Android-ADB-Plugin I have access to the entire file system and SD cards of all my Androids.

I don't know about yours but, for me its enough when I select "LG software" (don't know how's in yours cause mine is in Portuguese...), after I just need to run "LGAutoRun.exe" and I can see the internal store and external sd just like if I had "mass storage" selected.
If I have previously selected "LG software" windows just ask me if I want to open to see the files, but thats normal cause the drivers are already installed.

@Bud Cord & @RuedasLocas
Both are again solutions where I would have to run some kind of software on the Host side.
Yes, this will work for Win7 computers BUT IT WILL NOT work for my TV, it will NOT work for my Car Stereo, it will NOT work for my Printer, it will NOT work for my portable mediaplayer, it will NOT work for my DSL-Router, it will NOT work for my DVB-SetTopBox, and so on. For all those other devices that ONLY understand USB MASS STORAGE it will simply NOT WORK.
Yeah USB MASS STORAGE (UMS) is some crappy old block access device. BUT it is also the defacto standart that every USB Device that can read a USB stick supports.
I had a Windows Mobile 6.1 Phone some years ago, it hat UMS, only for the SDcard.
I had a simple Feature-Phone(SE K610), it hat UMS, again only for the Memory card.
I had a Chinese unbranded Phone with dual-Sims and a TV set built in, it had UMS!
I had an iPhone I could Jailbreak it and activate UMS. Every 2$ cheapo USB stick has UMS.
I again want USB MASS STORAGE at least for the SD-Card. I am still trying to find some workaround. Even that the phone was not rootable at the beginning was no dealbreaker for me, but THIS actually IS a dealbreaker for me. I loved to use my Phone as a USB-Stick and plug it in everywhere. I always did that. IPhone has forced me to carry around my own cable, android is forcing me to carry around a regular USB stick.
I hate the phone for not having MASS STORAGE. The worst part is that it seems like Android has adopted this crap, so any Android phone is just as bad.
Sorry for whining, I just thought that there was some simple solution that I am not seeing.

[HOWTO]Mount USB

People have asked since discovery of our beloved Ouya once you've got it out of the box you may have noticed that their is a USB port on the back.
After quick maintenance of my own personal testing USB will simply not run from stock.(Not that I'm fully aware of).
There are a few key ways of going about this, two ways as far as we know.
But I'm only teaching one.
First off, if you've plugged up a USB and didn't get a mount, there are a few steps to take to attempt to fix. I've got a positive affect to this, others have had different.
So let's start off first by using the ADB method of getting root a.k.a Superuser onto out device using the tut in the dev area.
Once you've accessed this, download "[root] StickMount" from the market. Assuming that this .apk can't be found on Google let's use an app to pull your .apk from the downloaded stuff you've gotten in the Google Play Store.
Now there are a few apps that do this, I used App2SD and rebuilt the .apk myself(which took a good while recoding), once you've pulled the .apk either load it tons cloud storage area you use, or side load it, you can also find a tutorial in the dev area as well.
Once you've got the app loaded make sure you set the setting properly to detect the USB you plan to use! This is key to getting something detected. From here you should be able to check in your file explorer and locate "ExternalSD" or whatever you see it fall under. If, and only if the USB doesn't show up, that may mean you've got the wrong format. I want each and all of you to give FAT32 a go as this is standard.
Warning, I don't know who all has tried this so if you're not happy with the occurrence, don't come beating my door in.
If there's anybody who ends up with a successful outcome, please leave feedback!
If nobody gets anything I'll just make sure to have this thread locked or closed.
If you're suffering any other issues, try this.
krankdroid said:
Since my 8 GB USB storage formatted FAT32 worked by just plugging it in, i am not to say what format storage should be formatted in, but seeing that this is just Android, i don't see how setup should differ in anyway from most other devices.
Now plugging in storage does not bring up any notifications on the OUYA since notification area has been disabled.
So you need to use a file explorer to navigate into the USB storage. Sadly, OUYA decided not to add something as simple as access to your own file system.
in "Make" "Software" open the browser. navigate to this:
http://bit.ly/13SJxOB
i shortened the URL since the full URL is a pain to write on a controller:
http://gdown.baidu.com/data/wisegame/86f47585c4eed74f/ESFileExplorer.apk
Once downloaded. go to "Manage" "Advanced" "Storage" and open up downloads. select the "ESFileExplorer.apk" app you just downloaded and head back to the main menu.
"Make" Software" and next to the browser you should see the app icon for the ES File Manager.
in the file manager that has the default start page in your internal SD card storage. Just select your "USB Storage" instead of "SD card"
installing something like StickMount and needing superuser privileges is totally overkill for just accessing external storage.
if the root and stickmount way works for 1000 GB+ storage sizes i have no idea. However i don't see how it should affect external storage size
Click to expand...
Click to collapse

You're doing it wrong, then. Mine mounted my fat32 USB ssd right out of the box. No extra apps or haxx needed. It mounts to /mnt/usbdisk or something along those lines.

gianptune said:
You're doing it wrong, then. Mine mounted my fat32 USB ssd right out of the box. No extra apps or haxx needed. It mounts to /mnt/usbdisk or something along those lines.
Click to expand...
Click to collapse
This isn't for you then.
Sent from my HTC One VX using xda app-developers app

All Ouya's should mount a harddrive with no problem. You just have to plug it in when it is off or restart using a app or the terminal. It just has to be OFF not in sleep mode.

samt3 said:
All Ouya's should mount a harddrive with no problem. You just have to plug it in when it is off or restart using a app or the terminal. It just has to be OFF not in sleep mode.
Click to expand...
Click to collapse
No, there's different methods for different formats.
Terabytes won't read unless you've got a certain thing installed.
If this was useful to you, I can only ask of a favor!
Check out my YouTube channel!
http://WWW.YouTube.com/user/TheDarkRosary
Subscribe if you will!

Ouya-XD said:
No, there's different methods for different formats.
Terabytes won't read unless you've got a certain thing installed.
Click to expand...
Click to collapse
This is true, all of a sudden this week there were many people having trouble using their USB drives. Mine used to work until sometime this week. NTFS included. I was able to mount an NTFS-formatted 1TB Seagate Expansion drive earlier tonight. What I had to do was root my Ouya and use the USB OTG Helper app. I made a post on OuyaForums about it here.

NssOne said:
This is true, all of a sudden this week there were many people having trouble using their USB drives.
Click to expand...
Click to collapse
I have a "2"gb, or 2,000,000,000 bytes. 1.86 real gb... anywho, its a Lexar jump drive I wanted to copy files with, and I have a single FAT32 partition and was not able to mount it simply by plugging it in. Tried rebooting, and re-plugging the device. It doesn't work. I imagine it may with stickmount.

jmhalder said:
I have a "2"gb, or 2,000,000,000 bytes. 1.86 real gb... anywho, its a Lexar jump drive I wanted to copy files with, and I have a single FAT32 partition and was not able to mount it simply by plugging it in. Tried rebooting, and re-plugging the device. It doesn't work. I imagine it may with stickmount.
Click to expand...
Click to collapse
Certain Jump drives will not mount because the USB port does not supply enough power. Powered USB drives or very efficient ones will work.
Sent from my Nexus 10 using Tapatalk HD

samt3 said:
All Ouya's should mount a harddrive with no problem. You just have to plug it in when it is off or restart using a app or the terminal. It just has to be OFF not in sleep mode.
Click to expand...
Click to collapse
Nope. I have an 8GB usb stick and it doesn't work no matter what I do or what format I put it in. Haven't tried this method yet but what you're talking about does NOT work for everyone. And the powered 2TB external drive just causes Ouya to freeze every time at boot.

altimax98 said:
Certain Jump drives will not mount because the USB port does not supply enough power. Powered USB drives or very efficient ones will work.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
I have never seen a powered USB flash drive. Furthermore, if a flash drive isn't mounting due to the port not outputting enough power, then the drive or the mobo is broken or otherwise failing to adhere to the spec. External hard drives (spinning platters) of the type common a few years ago when flash drives were cost prohibitive generally DO require an external power source (or at least draw from 2 USB ports), but they generally aren't referred to as jump drives. In my experience (which is considerable but not infinite) most flash drive issues tend to be due to bad connections after the drive is beat up or by managing to write past the end of the drive. Flash media is generally reliable and does not draw more power than the USB port puts out by spec. I highly doubt that power supply problems are a common cause of mounting issues.
Sent from my SCH-I535 using Tapatalk 2

jmhalder said:
I have a "2"gb, or 2,000,000,000 bytes. 1.86 real gb... anywho, its a Lexar jump drive I wanted to copy files with, and I have a single FAT32 partition and was not able to mount it simply by plugging it in. Tried rebooting, and re-plugging the device. It doesn't work. I imagine it may with stickmount.
Click to expand...
Click to collapse
Read this
v. v.
It seems that you just wanna shun the method I gave you.
If you dont want help, that's fine with me but please don't come into my threads to tread on my method.
Firstly, I need to know!
Are you rooted or stock?
If either, have you installed Ouya Plus?
If so! Try the given method above or Google an apps that suits your needs.
We are here to help, and I'm telling you right now that this method has worked for me, and maybe other users.
FACT:
Not all Ouya have been able to read USB from start, more than others have reported having issues with USB and have had to use the root method to even get a reading.
TIP:
Wanna check and see if your device is/has been read?
Please either use FX File Manager or Astro as these are the best at the moment. Both can be found and side loaded onto the Ouya.
Once you've installed either one, go to the manager, do you see an "External Drive" or "USB Mounted Drive" on the device? You're good to go.
ADVICE:
Did this not show up for you?
SOLUTION:
The butter to the bread is as easy as my method above yet not all people have been as lucky as I.
NssOne said:
This is true, all of a sudden this week there were many people having trouble using their USB drives. Mine used to work until sometime this week. NTFS included. I was able to mount an NTFS-formatted 1TB Seagate Expansion drive earlier tonight. What I had to do was root my Ouya and use the USB OTG Helper app. I made a post on OuyaForums about it here.
Click to expand...
Click to collapse
If this was useful to you, I can only ask of a favor!
Check out my YouTube channel!
http://WWW.YouTube.com/user/TheDarkRosary
Subscribe if you will!

how do you get apps2sd to read the external usb and not internal? the usb stick shows up but apps2sd only sees the internal

Predator04 said:
how do you get apps2sd to read the external usb and not internal? the usb stick shows up but apps2sd only sees the internal
Click to expand...
Click to collapse
I've only heard of Apps2SD working with ROOTed Ouyas only.
If you can't find the solution here, go and check the official forums, there are some people there who helped me.
Sent from my HTC One VX using xda app-developers app

Ouya-XD said:
I've only heard of Apps2SD working with ROOTed Ouyas only.
If you can't find the solution here, go and check the official forums, there are some people there who helped me.
Sent from my HTC One VX using xda app-developers app
Click to expand...
Click to collapse
yeah its rooted. i guess this method does not work.

Predator04 said:
yeah its rooted. i guess this method does not work.
Click to expand...
Click to collapse
Since my 8 GB USB storage formatted FAT32 worked by just plugging it in, i am not to say what format storage should be formatted in, but seeing that this is just Android, i don't see how setup should differ in anyway from most other devices.
Now plugging in storage does not bring up any notifications on the OUYA since notification area has been disabled.
So you need to use a file explorer to navigate into the USB storage. Sadly, OUYA decided not to add something as simple as access to your own file system.
in "Make" "Software" open the browser. navigate to this:
http://bit.ly/13SJxOB
i shortened the URL since the full URL is a pain to write on a controller:
http://gdown.baidu.com/data/wisegame/86f47585c4eed74f/ESFileExplorer.apk
Once downloaded. go to "Manage" "Advanced" "Storage" and open up downloads. select the "ESFileExplorer.apk" app you just downloaded and head back to the main menu.
"Make" Software" and next to the browser you should see the app icon for the ES File Manager.
in the file manager that has the default start page in your internal SD card storage. Just select your "USB Storage" instead of "SD card"
installing something like StickMount and needing superuser privileges is totally overkill for just accessing external storage.
if the root and stickmount way works for 1000 GB+ storage sizes i have no idea. However i don't see how it should affect external storage size

krankdroid said:
Since my 8 GB USB storage formatted FAT32 worked by just plugging it in, i am not to say what format storage should be formatted in, but seeing that this is just Android, i don't see how setup should differ in anyway from most other devices.
Now plugging in storage does not bring up any notifications on the OUYA since notification area has been disabled.
So you need to use a file explorer to navigate into the USB storage. Sadly, OUYA decided not to add something as simple as access to your own file system.
in "Make" "Software" open the browser. navigate to this:
http://bit.ly/13SJxOB
i shortened the URL since the full URL is a pain to write on a controller:
http://gdown.baidu.com/data/wisegame/86f47585c4eed74f/ESFileExplorer.apk
Once downloaded. go to "Manage" "Advanced" "Storage" and open up downloads. select the "ESFileExplorer.apk" app you just downloaded and head back to the main menu.
"Make" Software" and next to the browser you should see the app icon for the ES File Manager.
in the file manager that has the default start page in your internal SD card storage. Just select your "USB Storage" instead of "SD card"
installing something like StickMount and needing superuser privileges is totally overkill for just accessing external storage.
if the root and stickmount way works for 1000 GB+ storage sizes i have no idea. However i don't see how it should affect external storage size
Click to expand...
Click to collapse
Thanks for helping, I'll make sure to add this to the OP
Sent from my HTC One VX using xda app-developers app

Mine wouldn't work right out of the box. I turned it on and set it up. Plugged in my 2.5" spare laptop USB 3.0 HDD. Nothing. 32gb NTFS Thumb drive. Nothing. 16gb FAT32. Nothing. MicroSD 16gb (used in my MK808). Nothing. Thought my USB was blown. Plugged in a PS3 Sixaxis controller and it worked. So something was strange.
Read online that there was a firmware patch that must have broke some things. I'm assuming this broke if a USB was previously mounted.
Only a Factory Reset would fix it. Plugged in the USB HDD and it booted right now first time. Spent 2 days screwing with it.
So if nothing mounts, factory reset. It SHOULD mount out of the box. FAT32 and NTFS are both confirmed to work with no additional apps.

player911 said:
Mine wouldn't work right out of the box. I turned it on and set it up. Plugged in my 2.5" spare laptop USB 3.0 HDD. Nothing. 32gb NTFS Thumb drive. Nothing. 16gb FAT32. Nothing. MicroSD 16gb (used in my MK808). Nothing. Thought my USB was blown. Plugged in a PS3 Sixaxis controller and it worked. So something was strange.
Read online that there was a firmware patch that must have broke some things. I'm assuming this broke if a USB was previously mounted.
Only a Factory Reset would fix it. Plugged in the USB HDD and it booted right now first time. Spent 2 days screwing with it.
So if nothing mounts, factory reset. It SHOULD mount out of the box. FAT32 and NTFS are both confirmed to work with no additional apps.
Click to expand...
Click to collapse
I did a factory reset, still wouldn't work. I lost hours of work to set it up.
I managed to fix it with a script after about 5 hours

XblackdemonX said:
I did a factory reset, still wouldn't work. I lost hours of work to set it up.
I managed to fix it with a script after about 5 hours
Click to expand...
Click to collapse
which script???? lol cant just say that and not give info! how rude haha

Ouya-XD said:
Thanks for helping, I'll make sure to add this to the OP
Sent from my HTC One VX using xda app-developers app
Click to expand...
Click to collapse
yeah no problem. However i REALLY fail to see how this belong in the development section. This should be for ROMs, MODs and tweaks, not really how best to get a build in stand feature working. No matter how bad it has been implemented by OUYA.
Could some of the mods look into moving OP's topic?

[Q] File System Access via USB?

Hey all,
Is this possible with the Droid Turbo?
I'm used to plugging my phones in via USB, and having the file system mount as a mass storage device, allowing me to move files to and from my phone easily.
When I plug in the Droid Turbo, I have two choices, either MTP, which just brings up an installer of some sort, or camera mode, which only allows me access to pictures and videos.
Now granted, all of my past Android phones have been running third party images (mostly Cyanogenmod) and maybe this is the reason for the difference (though I thought I had file system access with stock image in the past, but maybe I am misremembering)
Any thoughts on anything I can do to get complete file system access?

Works for me. ES file manager does too.

fatasian said:
Works for me. ES file manager does too.
Click to expand...
Click to collapse
I have file system access from the phone using ES no problem, and can mount usb storage using one of those adapters.
I'm talking about access to the phones file system from the computer using USB.
Worked perfectly on my old phone, doesn't with the Turbo.

OIC, not that I know of.

Sounds like it might be a driver issue. I plugged my phone into my computer (Windows 7) shortly after I got home with the turbo and moved a bunch of backed up files onto the turbo without any issues at all.

PerCompLLC said:
Sounds like it might be a driver issue. I plugged my phone into my computer (Windows 7) shortly after I got home with the turbo and moved a bunch of backed up files onto the turbo without any issues at all.
Click to expand...
Click to collapse
Hmm. Could be. I'm on a Linux desktop, but have never had this problem before...

mattlach said:
Hmm. Could be. I'm on a Linux desktop, but have never had this problem before...
Click to expand...
Click to collapse
Understood. Hardware manufacturers modify drivers so frequently though that that is probably the issue. Can't say that I've attempted to connect to my linux box yet...

PerCompLLC said:
Understood. Hardware manufacturers modify drivers so frequently though that that is probably the issue. Can't say that I've attempted to connect to my linux box yet...
Click to expand...
Click to collapse
I know. Never understood the need for specialized drivers when they could just mount as a standard USB Mass Srorage device and be compatible with everything out of the box
But I guess that would just make too much sense...

Has anyone tried a otg with it yet

Same Problem Here...
I had the same issue when plugging my Droid Turbo into my Windows 7 machine. I'm afraid I don't have any advice for those of you on Linux, but if you have problems on windows where it's only showing you something about "Motorola Device Manager", here are the steps I took that fixed the problem for me:
On Windows 7 go to Start Menu > Devices and Printers. Under Devices you should see XT1254. Right click on this and select Troubleshoot. If the issue you are experiencing is like mine, then the problem was simply that the drivers didn't auto-install when the Droid was first connected to your PC and the troubleshooter should install them properly for you.
I have a sneaking suspicion that the cause is that Moto Device Manager software. When you first attach the phone via USB the computer treats it as an install disc rather than as a storage device. Perhaps those of you on linux might be having a similar issue, I hope this helps and I apologize if it doesn't.

My wife just purchased a Turbo. I can not get the storage to mount on Ubuntu. This is the only phone that I don't have access to the storage. I do have access to the PMP. I am also receiving an "no permissions" when using adb. I search for adb devices, and no permissions? I have developer options enabled, USB debugging checked. I just tried 2 other phones with adb, all functions?

To clear up some things:
Different OSes treat MTP differently. Windows gives access to the storage area, OS X requires Android File Transfer App, and GNU/Linux I have no idea.
chazall1 said:
My wife just purchased a Turbo. I can not get the storage to mount on Ubuntu. This is the only phone that I don't have access to the storage. I do have access to the PMP. I am also receiving an "no permissions" when using adb. I search for adb devices, and no permissions? I have developer options enabled, USB debugging checked. I just tried 2 other phones with adb, all functions?
Click to expand...
Click to collapse
chazall1: You have to authorize the computer on the device. The screen must be on and unlocked.
mattlach said:
I know. Never understood the need for specialized drivers when they could just mount as a standard USB Mass Srorage device and be compatible with everything out of the box
But I guess that would just make too much sense...
Click to expand...
Click to collapse
mattlach: It makes perfect sense why they do not use USB Mass Storage. Mass storage requires exclusivity to the OS, and that means the phone cannot use it. Which means, the phone crashes because the OS resides on the NAND you would want to mount and read. MTP is the compromise. Phone in the past that had access as mass storage had SD cards as well, either internally or added on. For example, the old school Droid Incredible had both an internal sd card and an external slot.

Probably already answered but yes you can. Just gotto my computer as yyou'd lookfor a uUSB device. And sorry aboutmiss sspells. Swift key sucks so much...... Omfg.

Looks like they want us to use MTP or PTP. Mass storage is not an option. I found this from Verizon:
http://www.verizonwireless.com/support/knowledge-base-117349/
"USB Mass Storage feature is currently not available, however, files can be transferred to/from a computer utilizing Media Transfer Protocol (MTP)"

Not to jack the thread, but when using Windows Explorer to access my turbo, almost all of the folders (music, pictures, dcim, etc.) show up as files. Anyone else have this issue?
Sent from my XT1254 using XDA Free mobile app

According to Verizon, its not possible to connect the Turbo as a mass storage device. Epic fail in my opinion... U can bypass it by using google drive...

papstar said:
Not to jack the thread, but when using Windows Explorer to access my turbo, almost all of the folders (music, pictures, dcim, etc.) show up as files. Anyone else have this issue?
Sent from my XT1254 using XDA Free mobile app
Click to expand...
Click to collapse
True. Windows 7 is the solution

Epic fail, indeed.
aviwdoowks said:
True. Windows 7 is the solution
Click to expand...
Click to collapse
Well, Windows 7 doesn't solve the problem. The main reason I didn't switch to an iPhone from Android was lack of access to the file system. There are other things on my phone I would like to transfer or backup to my PC besides the media that appears when connecting the device. I had no idea when I got this new Droid Turbo I would be pushed back into the stone age. No sd card, no removable battery and no access to the file system. Arrgh
And no manual sound off switch that can't be overridden by software.

Hey guys, I know this is an old thread but Google brought it up. haha
I was messing with this and I turned off the "Software Installation" option and all of the sudden drivers installed and everything seems to be working. I guess the software installer was overriding the normal driver installation or something.
Not sure it's a universal fix but maybe it'll help someone.

Steve One said:
Has anyone tried a otg with it yet
Click to expand...
Click to collapse
Yes. Works fine.
EDIT: Oops. Looks like this is a zombie thread. I'm sure you probably had the answer to that by now.