Database Develop

Rom installation failed

Pyramid 3d v7.9.1XE with android 2.3.4
At status 1 installation gets aborted
really pissed off
help me
thanks in advance

Either the rom is not the IncS version or the file was damaged during download possibly from using a dl manager. Just try a different rom.

Is your phone S-OFF?

itsbeertimenow said:
Either the rom is not the IncS version or the file was damaged during download possibly from using a dl manager. Just try a different rom.
Click to expand...
Click to collapse
I hav downloaded 2 tyms..but im often gettin Installation aborted

jkolner said:
Is your phone S-OFF?
Click to expand...
Click to collapse
S ofcourse its s-off

santhoshpirate said:
Pyramid 3d v7.9.1XE with android 2.3.4
At status 1 installation gets aborted
really pissed off
help me
thanks in advance
Click to expand...
Click to collapse
Are you sure you found that rom in incredible S forum?

santhoshpirate said:
Pyramid 3d v7.9.1XE with android 2.3.4
At status 1 installation gets aborted
really pissed off
help me
thanks in advance
Click to expand...
Click to collapse
OP might be right. What I have experienced with my IS is that every single ROM I install, it never boots into the newly flashed ROM.
I have got S-Off, obviously. THX for asking.
I gained S-Off via revolutionary method, am able to flash any CM7 nightlies, it boots fine, but as soon as I flash any other Sense ROM, I dont get my phone to boot into the ROM.
When I flash the ROM, it finishes, atleast it displays the message at the end, and then it reboots, and stuck at the HTC Logo.
I pull out the battery, relaunch Recovery again, reload either CM7 or the Default Stock ROM using nandroid backup and get the phone to work... but custom ROMs are impossible to flash and boot into.
Any inputs by anyone?
I don't think I haven't followed the S-Off method incorrectly as I am able to flash CM7 and I also have got Root Access.
Thx in advance.
Cheers!!!

lundberg512 said:
Are you sure you found that rom in incredible S forum?
Click to expand...
Click to collapse
s i found tat one in incredible s forum

santhoshpirate said:
s i found tat one in incredible s forum
Click to expand...
Click to collapse
Have you tried flashing other roms or is it just one that doesnt work?

santhoshpirate said:
I hav downloaded 2 tyms..but im often gettin Installation aborted
Click to expand...
Click to collapse
Hey mate, did you check the md5 sum matches?
In CWM:
Format System
Format Data
Format Cache
Wipe Data/Factory Reset
Then Flash you rom, reboot and wait for it all to install.

Are you wiping the dalvik cache and doing a full wipe before installing? And have you checked to see whether you have signified checking on or off?

[Q] Updating to Gingerbread?

Finally we have gingerbread! Thing is im not sure how to update to it. Ive searched and read everything but it doesnt make much sense. Ever since GB came out I see things like zv4, zv6, zv7...I dont know what those are and some of the tuts for gb require those or something.
Here is what I have. Im currently on the revolt rom 1.5 and I have the stock rom that the cubed uploaded as well. I also have cwm. Not sure if this helps. Im a super noob and this is the first android phone phone ive ever had. Can someone point me in the right direction? Thanks
Torin

Torin_93 said:
Finally we have gingerbread! Thing is im not sure how to update to it. Ive searched and read everything but it doesnt make much sense. Ever since GB came out I see things like zv4, zv6, zv7...I dont know what those are and some of the tuts for gb require those or something.
Here is what I have. Im currently on the revolt rom 1.5 and I have the stock rom that the cubed uploaded as well. I also have cwm. Not sure if this helps. Im a super noob and this is the first android phone phone ive ever had. Can someone point me in the right direction? Thanks
Torin
Click to expand...
Click to collapse
Alright, here it goes
1) Download and install this on your external sd card http://forum.xda-developers.com/showthread.php?t=1326893
2) Boot into recovery and flash that zip (will replace /system and /boot)
3) Install and run revotoolkit found here http://forum.xda-developers.com/showthread.php?t=1144951
4) Click install recovery and select !!Revo_stock!!
5) Reboot phone
6) Check for updates. It's that easy.

mtmichaelson said:
Alright, here it goes
1) Download and install this on your external sd card http://forum.xda-developers.com/showthread.php?t=1326893
2) Boot into recovery and flash that zip (will replace /system and /boot)
3) Install and run revotoolkit found here http://forum.xda-developers.com/showthread.php?t=1144951
4) Click install recovery and select !!Revo_stock!!
5) Reboot phone
6) Check for updates. It's that easy.
Click to expand...
Click to collapse
And we have MTM to the rescue! Im giving it a try now! Thanks for compiling simple instructions!

After these steps I can put gingervolt on and put cwm back on using the revo toolkit?

Torin_93 said:
After these steps I can put gingervolt on and put cwm back on using the revo toolkit?
Click to expand...
Click to collapse
Yeppers. After you root, install cwm with revotoolkit, and reboot into recovery using revotoolkit.
Sent from my VS910 4G using xda premium

mtmichaelson said:
Alright, here it goes
1) Download and install this on your external sd card http://forum.xda-developers.com/showthread.php?t=1326893
2) Boot into recovery and flash that zip (will replace /system and /boot)
3) Install and run revotoolkit found here http://forum.xda-developers.com/showthread.php?t=1144951
4) Click install recovery and select !!Revo_stock!!
5) Reboot phone
6) Check for updates. It's that easy.
Click to expand...
Click to collapse
Awesome, concise and accurate. You are da man!! Not only do you make a great product, you have impeccable service to those of us who need help. Thanks!!

Torin_93 said:
And we have MTM to the rescue! Im giving it a try now! Thanks for compiling simple instructions!
Click to expand...
Click to collapse
Lol i tried this and then installing stock recovery it said md5 mismatch...i give up
Sent from my VS910 4G using Tapatalk

Soooooooo I did these steps and updated but im still n 2.2.2. What gives?

Now im not even rooted

If you're tired of waiting for the OTA, head over to firmware page and follow the instructions. and give mtmichaelson a "thanks"

btroop said:
If you're tired of waiting for the OTA, head over to firmware page and follow the instructions. and give mtmichaelson a "thanks"
Click to expand...
Click to collapse
You mean Jackpot?

majorpay said:
You mean Jackpot?
Click to expand...
Click to collapse
You mean they're not the same person?

Torin_93 said:
Soooooooo I did these steps and updated but im still n 2.2.2. What gives?
Click to expand...
Click to collapse
I'm glad to hear I wasn't the only one confused by those instructions at first . My first assumption when reading all these posts were that V4 V6 and V7 were hardware versions of the Revo and you were suppose to download the Gingerbread TOT in correlation to your hardware. Here's what You need to know. They are just software update versions.
V4 and V6 are Froyo
V7 is Gingerbread.
Install V7 and you'll be all set

got it worked out

[Q] why i can't root my x8

why i can't root my fon??
i try so many time but the result still same..
the superoneclick just go over and over until it jammed..
i have follow the instruction.
bydaway, my fon was root before,then it get hardbrick
i use the pcc to repair it, ok..but cant root

Make sure you have USB Debugging turned on and unmount the sd card.

do you have usb debugging enabled?
btw do you have DroidExplorer installed on your PC?

already did...still not working...

badutKU said:
already did...still not working...
Click to expand...
Click to collapse
do u hav phone drivers installed?

kirmada said:
do u hav phone drivers installed?
Click to expand...
Click to collapse
i got the driver installed.debugging mode on, and i also unmount the sd..

badutKU said:
i got the driver installed.debugging mode on, and i also unmount the sd..
Click to expand...
Click to collapse
hmm.. try updating ur phone again to 2.1 and root,see if the problem still persists, try update with SEUS

try with other PC.

badutKU said:
i got the driver installed.debugging mode on, and i also unmount the sd..
Click to expand...
Click to collapse
wen i first rooted,i read on some thread dat i need to hav microsoft net framework(latest) installed too and yeah i rooted with superoneclick too,jus giv a try

kirmada said:
hmm.. try updating ur phone again to 2.1 and root,see if the problem still persists, try update with SEUS
Click to expand...
Click to collapse
stil not working..
thre no effct if i install the busybox and xrecovery 1st right??

Try running SuperOneClick as administrator
Sent from my X8 using xda premium

badutKU said:
stil not working..
thre no effct if i install the busybox and xrecovery 1st right??
Click to expand...
Click to collapse
if u root with superoneclick,it will install busybox and chargemon automatically while rooting it
then install xrecovery

are you sure you have the latest version of superoneclick? i rooted my phone a year ago even then my version looked more advances than this. btw this should be in the Q&A section not the general

do you have a exploit list on your soc? if you do choose psneuter and click root! thats the way I did it!
sorry if my english is bad

wilbso said:
are you sure you have the latest version of superoneclick? i rooted my phone a year ago even then my version looked more advances than this. btw this should be in the Q&A section not the general
Click to expand...
Click to collapse
it not a latest version...but i use it when i 1st try to root my fon..that time it was ok.

why??????????
now the last section of root it say
Remounting system with read-only access...
mount: Device or resource busy
then it just stop at there....please help.................

badutKU said:
now the last section of root it say
Remounting system with read-only access...
mount: Device or resource busy
then it just stop at there....please help.................
Click to expand...
Click to collapse
Try x8toolbox:
http://forum.xda-developers.com/showthread.php?t=1117100

Here is the lates superoneclick : http://forum.xda-developers.com/showthread.php?t=803682
I haved the same problem when my phone came back from se(bricked)
Have downloaded the lates superoneclick and it works!
And trie a reboot,after enabling usb debuging..
Good luck!

elderduke said:
Try x8toolbox:
http://forum.xda-developers.com/showthread.php?t=1117100
Click to expand...
Click to collapse
+1. Its a great little program.
Sent from my E15i using XDA App

I have a problem with rooting my x8...
When i wat to root it, it goes all well till it comes to rooting device..
Then goes failed, and i get this screen(in attachment)
When i first got this phone, i rooted it normally... And I bricked it.
So, after I bricked it, i got that... Every time... I tried to factory reset it, but nothing...
I don't have any idea...
Any help?

[Q] How to install ICS 4.0.4 BCM RC 3.4

hey, I am a noob at this and I desperately need help.
can someone show me step by step how to install ICS (BCM) on my N1?
i installed the zip file but it says I need a new hboot? what is that?
thanks.

hv a look at this thread first http://forum.xda-developers.com/showthread.php?t=1599460
if u still gots doubts can ask
Sent from my Nexus One using Tapatalk

n1newbie said:
hv a look at this thread first http://forum.xda-developers.com/showthread.php?t=1599460
if u still gots doubts can ask
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
thank you for your reply.
i have some stupid questions:
where do i install blackrose? on the pc or on the phone?
and suppose it is on the pc, in what state should my N1 be?
sorry for the lame question, but am really new in this.
i currently have CM7 on my phone.

AlaaWannous said:
thank you for your reply.
i have some stupid questions:
where do i install blackrose? on the pc or on the phone?
and suppose it is on the pc, in what state should my N1 be?
sorry for the lame question, but am really new in this.
i currently have CM7 on my phone.
Click to expand...
Click to collapse
1. You have to get go to the bootloader in you phone (tackball+vol-down+power) , when connected to your computer and then run blackrose from your computer.
2. Then you have to update the Blackrose partition table sizes to match that which is required by BCM ICS. Refer this thread for that:
http://forum.xda-developers.com/showthread.php?t=1366897
Btw, have you partitioned your SD card to have an sd-ext?

AlaaWannous said:
thank you for your reply.
i have some stupid questions:
where do i install blackrose? on the pc or on the phone?
and suppose it is on the pc, in what state should my N1 be?
sorry for the lame question, but am really new in this.
i currently have CM7 on my phone.
Click to expand...
Click to collapse
ok fine. so u have to start from beginning.
first head over to blackrose thread in dev section and download the files. http://forum.xda-developers.com/showthread.php?t=1270589
turn on usb debugging in ur fone
connect ur phone to pc while the phone is booted normally.
open the downloaded folder and run blackrose.exe and follow the on screen instructions. then blackrose will be installed in ur phone.
nw u need to change ur hboot as per the rom that u r going to flash.
u can do that by using blackrose.exe itself or u can follow this thread for easily changing hboot via recovery http://forum.xda-developers.com/showthread.php?t=1637166
Kibb said:
1. You have to get go to the bootloader in you phone (tackball+vol-down+power) , when connected to your computer and then run blackrose from your computer.
2. Then you have to update the Blackrose partition table sizes to match that which is required by BCM ICS. Refer this thread for that:
http://forum.xda-developers.com/showthread.php?t=1366897
Btw, have you partitioned your SD card to have an sd-ext?
Click to expand...
Click to collapse
hmmm. no buddy, to first install blackrose u need to connect ur phone to pc on normal mode...
Sent from my Nexus One using Tapatalk

ok this is what i did
-installed the BCM ICS rom
-installed the ICS hboot zip file from the link u gave me
-wiped all partitions
-flashed the hboot (it rebooted and loaded the old rom i have)
-when i tried to flash the BCM ICS, it still says WRONG HBOOT
how do i create the sd-ext file?
and what exactly am i partitioning here: the internal memory or the sd card?

Kibb said:
1. You have to get go to the bootloader in you phone (tackball+vol-down+power) , when connected to your computer and then run blackrose from your computer.
2. Then you have to update the Blackrose partition table sizes to match that which is required by BCM ICS. Refer this thread for that:
http://forum.xda-developers.com/showthread.php?t=1366897
Btw, have you partitioned your SD card to have an sd-ext?
Click to expand...
Click to collapse
how do i partition it? sorry for the stupid qs. am new at this

AlaaWannous said:
how do i partition it? sorry for the stupid qs. am new at this
Click to expand...
Click to collapse
you can partition ur sd card in recovery or else you can partition it wid a pc using software like MINITOOL PARTITION WIZARD. remember to back up ur data before partitioning.
wat recovery are u using? use 4ext.
its best to have 1 gb ext. you can search for it in youtube
Sent from my Nexus One using Tapatalk

AlaaWannous said:
ok this is what i did
-installed the BCM ICS rom
-installed the ICS hboot zip file from the link u gave me
-wiped all partitions
-flashed the hboot (it rebooted and loaded the old rom i have)
-when i tried to flash the BCM ICS, it still says WRONG HBOOT
how do i create the sd-ext file?
and what exactly am i partitioning here: the internal memory or the sd card?
Click to expand...
Click to collapse
hey bro. have u installed blackrose first???
Sent from my Nexus One using Tapatalk

Maybe you should read the BlackRose thread first so you understand what you're doing.. And search the Nexus One forum, because there have been so many questions about all this..

[Q] Any Solution for Super brick??

Hello,
I think My Samsung Note is super bricked, I am able to enter into recovery and download mode, internal SD card shows only 8GB now instead of 16 or 15GB.
Coping of files on to internal SD card take long time.
If I try PC ODIN, I will get stuck at Nand Write!!!.
Can anyone please help me.

Are you trying to flash from a .tar or from a file set rom?
Sent from my GT-N7000 using XDA

Yes I tried to flash RocketROM_ICS_v2.zip

prakashraobs said:
Yes I tried to flash RocketROM_ICS_v2.zip
Click to expand...
Click to collapse
You flash cwm rom in odin!!???!

can you please give me any link so that I can try

prakashraobs said:
can you please give me any link so that I can try
Click to expand...
Click to collapse
try this or this

I have done exactly what is being written in it. but after that which rom to copy to sd card and how to apply it. I am not getting.
I will try the second method with the link in the late evening.
Thanks for the help.

prakashraobs said:
I have done exactly what is being written in it. but after that which rom to copy to sd card and how to apply it. I am not getting
Click to expand...
Click to collapse
which guide you used???If its first one,just put the rom in sd card in recovery and flash it.

vijai2011 said:
which guide you used???If its first one,just put the rom in sd card in recovery and flash it.
Click to expand...
Click to collapse
SD card is not showing in CWM mode, I tried 1 method.
Thanks for your continued support.

prakashraobs said:
SD card is not showing in CWM mode, I tried 1 method.
Thanks for your continued support.
Click to expand...
Click to collapse
Did you follow the guide correctly???flashed the kernel in that post??I cannot try this because I dont have a superbricked note to try

yes I have flashed the kermal specified in it. and did partition and now i dont know where to head after that partition.

prakashraobs said:
yes I have flashed the kermal specified in it. and did partition and now i dont know where to head after that partition.
Click to expand...
Click to collapse
Boot into recovery,connect your phone to computer,mound sdcard.Its under mounts and storage in cwm.Now your computer will show your sdcard.Copy your rom.zip and flash it with recovery as usual.

Why dont you justtry to flash a stock rom? Then, once its running you can root it and flash anything you want trough cwm...
Sent from my GT-N7000 using XDA

I am downloading stock rom now and as you said I will do . first boot in recovery and mount SD card, Copy Stock rom to SD Card. and then flash it.
at presently I am downloading the stock rom. it may take some time. will let you know what is the result. I am going to office now will update the post after 9 or 10 hours.
This becomes handy for others also.
Thanks for the advice.

prakashraobs said:
I am downloading stock rom now and as you said I will do . first boot in recovery and mount SD card, Copy Stock rom to SD Card. and then flash it.
at presently I am downloading the stock rom. it may take some time. will let you know what is the result. I am going to office now will update the post after 9 or 10 hours.
This becomes handy for others also.
Thanks for the advice.
Click to expand...
Click to collapse
Dont flash stock with odin.Your device wont boot.When you have changed your partition,it is safer to use cwm.Since you are superbricked,you will get stuck in odin

prakashraobs said:
can you please give me any link so that I can try
Click to expand...
Click to collapse
This confused the sh1t outta me. Why is Samsung so damn complicated? So there are some ROMs you have to have a certain recovery to flash? My god, with HTC, once you have recovery, you flash whatever the hell you want. I got my mom a GNex for mothers day (even though I hate Samsung) and intended to root it and keep it up to date for her. But all this crazy talk about having to use certain modems (whatever the hell that is) with certain recoveries and certain ROMs, wow on a Dec device? So confused and disappointed. .
Jesus. With HTC, once you got recovery, you flash whatever radio, ROM, and kernel you want. None of the trick secret Sammy BS. Unbelievable since it's supposed to be a dev device.
Any help with Sammy always welcomed.
sent from my Evo LTE, usually.

scottspa74 said:
This confused the sh1t outta me. Why is Samsung so damn complicated? So there are some ROMs you have to have a certain recovery to flash? My god, with HTC, once you have recovery, you flash whatever the hell you want. I got my mom a GNex for mothers day (even though I hate Samsung) and intended to root it and keep it up to date for her. But all this crazy talk about having to use certain modems (whatever the hell that is) with certain recoveries and certain ROMs, wow on a Dec device? So confused and disappointed. .
Jesus. With HTC, once you got recovery, you flash whatever radio, ROM, and kernel you want. None of the trick secret Sammy BS. Unbelievable since it's supposed to be a dev device.
Any help with Sammy always welcomed.
sent from my Evo LTE, usually.
Click to expand...
Click to collapse
Maybe you should just stick with HTC. Going by your childish rant, Samsung is a bit deep for you.