[Q] How to install ICS 4.0.4 BCM RC 3.4 - Nexus One Q&A, Help & Troubleshooting

hey, I am a noob at this and I desperately need help.
can someone show me step by step how to install ICS (BCM) on my N1?
i installed the zip file but it says I need a new hboot? what is that?
thanks.

hv a look at this thread first http://forum.xda-developers.com/showthread.php?t=1599460
if u still gots doubts can ask
Sent from my Nexus One using Tapatalk

n1newbie said:
hv a look at this thread first http://forum.xda-developers.com/showthread.php?t=1599460
if u still gots doubts can ask
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
thank you for your reply.
i have some stupid questions:
where do i install blackrose? on the pc or on the phone?
and suppose it is on the pc, in what state should my N1 be?
sorry for the lame question, but am really new in this.
i currently have CM7 on my phone.

AlaaWannous said:
thank you for your reply.
i have some stupid questions:
where do i install blackrose? on the pc or on the phone?
and suppose it is on the pc, in what state should my N1 be?
sorry for the lame question, but am really new in this.
i currently have CM7 on my phone.
Click to expand...
Click to collapse
1. You have to get go to the bootloader in you phone (tackball+vol-down+power) , when connected to your computer and then run blackrose from your computer.
2. Then you have to update the Blackrose partition table sizes to match that which is required by BCM ICS. Refer this thread for that:
http://forum.xda-developers.com/showthread.php?t=1366897
Btw, have you partitioned your SD card to have an sd-ext?

AlaaWannous said:
thank you for your reply.
i have some stupid questions:
where do i install blackrose? on the pc or on the phone?
and suppose it is on the pc, in what state should my N1 be?
sorry for the lame question, but am really new in this.
i currently have CM7 on my phone.
Click to expand...
Click to collapse
ok fine. so u have to start from beginning.
first head over to blackrose thread in dev section and download the files. http://forum.xda-developers.com/showthread.php?t=1270589
turn on usb debugging in ur fone
connect ur phone to pc while the phone is booted normally.
open the downloaded folder and run blackrose.exe and follow the on screen instructions. then blackrose will be installed in ur phone.
nw u need to change ur hboot as per the rom that u r going to flash.
u can do that by using blackrose.exe itself or u can follow this thread for easily changing hboot via recovery http://forum.xda-developers.com/showthread.php?t=1637166
Kibb said:
1. You have to get go to the bootloader in you phone (tackball+vol-down+power) , when connected to your computer and then run blackrose from your computer.
2. Then you have to update the Blackrose partition table sizes to match that which is required by BCM ICS. Refer this thread for that:
http://forum.xda-developers.com/showthread.php?t=1366897
Btw, have you partitioned your SD card to have an sd-ext?
Click to expand...
Click to collapse
hmmm. no buddy, to first install blackrose u need to connect ur phone to pc on normal mode...
Sent from my Nexus One using Tapatalk

ok this is what i did
-installed the BCM ICS rom
-installed the ICS hboot zip file from the link u gave me
-wiped all partitions
-flashed the hboot (it rebooted and loaded the old rom i have)
-when i tried to flash the BCM ICS, it still says WRONG HBOOT
how do i create the sd-ext file?
and what exactly am i partitioning here: the internal memory or the sd card?

Kibb said:
1. You have to get go to the bootloader in you phone (tackball+vol-down+power) , when connected to your computer and then run blackrose from your computer.
2. Then you have to update the Blackrose partition table sizes to match that which is required by BCM ICS. Refer this thread for that:
http://forum.xda-developers.com/showthread.php?t=1366897
Btw, have you partitioned your SD card to have an sd-ext?
Click to expand...
Click to collapse
how do i partition it? sorry for the stupid qs. am new at this

AlaaWannous said:
how do i partition it? sorry for the stupid qs. am new at this
Click to expand...
Click to collapse
you can partition ur sd card in recovery or else you can partition it wid a pc using software like MINITOOL PARTITION WIZARD. remember to back up ur data before partitioning.
wat recovery are u using? use 4ext.
its best to have 1 gb ext. you can search for it in youtube
Sent from my Nexus One using Tapatalk

AlaaWannous said:
ok this is what i did
-installed the BCM ICS rom
-installed the ICS hboot zip file from the link u gave me
-wiped all partitions
-flashed the hboot (it rebooted and loaded the old rom i have)
-when i tried to flash the BCM ICS, it still says WRONG HBOOT
how do i create the sd-ext file?
and what exactly am i partitioning here: the internal memory or the sd card?
Click to expand...
Click to collapse
hey bro. have u installed blackrose first???
Sent from my Nexus One using Tapatalk

Maybe you should read the BlackRose thread first so you understand what you're doing.. And search the Nexus One forum, because there have been so many questions about all this..

Related

Unrevoked forever + radio update

Can radios be flashed with UF at anytime now with an update.zip?
Also where is a zip file for the 2.15 radio or is there anyone willing to share? It's not the same as the evo's is it?
Sent from my ADR6300 using Tapatalk
To flash:
1. Place PB31IMG.zip to root of SD card
2. Power down phone
3. Press volume down and power at same time
4. It will ask to update...press volume UP for yes
5. It will ask for reboot...press volume UP for yes
Once done...enjoy.
bradatz said:
Can radios be flashed with UF at anytime now with an update.zip?
Also where is a zip file for the 2.15 radio or is there anyone willing to share? It's not the same as the evo's is it?
Click to expand...
Click to collapse
The file download for the radio is in the Unrevoked forever thread.
Sent from my rooted IncrediblÄ™
tats_06 said:
To flash:
1. Place PB31IMG.zip to root of SD card
2. Power down phone
3. Press volume down and power at same time
4. It will ask to update...press volume UP for yes
5. It will ask for reboot...press volume UP for yes
Once done...enjoy.
Click to expand...
Click to collapse
i thought with S-OFF, we can flash radio with CWM? also, do i just rename the radio OTA to PB31IMG(.zip)?
with s-off, i can flash the radio anytime i want with any rom i want? without going back to the unroot stock rom?
zeke1988 said:
i thought with S-OFF, we can flash radio with CWM? also, do i just rename the radio OTA to PB31IMG(.zip)?
with s-off, i can flash the radio anytime i want with any rom i want? without going back to the unroot stock rom?
Click to expand...
Click to collapse
It already saves it as PB31IMG.zip....so just move it to root and go on with process.
That's for the splash and does not update radio. I've installed that and the update.zip and still have 2.05
Sent from my ADR6300 using Tapatalk
bradatz said:
That's for the splash and does not update radio. I've installed that and the update.zip and still have 2.05
Sent from my ADR6300 using Tapatalk
Click to expand...
Click to collapse
He said the thread, not the wiki.
I honestly don't know what I'm doing wrong, i have the pb31img.zip(radio update) on root of sd did the whole power down and power on with volume(down) and when i get to hboot it has
fastboot
recovery
clear storage
simlock
after 2 seconds or so it does this:
sd checking...
loading...pb31diag.zip
no image
loading...pb31diag.nbh
no image or wrong image
loading...pb31img.zip
no image
loading...pb31img.nbh
no image or wrong image
so does anyone know what the problem is?
Sac's Droid said:
I honestly don't know what I'm doing wrong, i have the pb31img.zip(radio update) on root of sd did the whole power down and power on with volume(down) and when i get to hboot it has
fastboot
recovery
clear storage
simlock
after 2 seconds or so it does this:
sd checking...
loading...pb31diag.zip
no image
loading...pb31diag.nbh
no image or wrong image
loading...pb31img.zip
no image
loading...pb31img.nbh
no image or wrong image
so does anyone know what the problem is?
Click to expand...
Click to collapse
Make sure the sdcard is formatted as fat32 and that the zip name is exactly "PB32IMG.zip", exact casing and make sure also that its not .zip.zip
OK i just reformatted the sd card to FAT32 and the file i downloaded was PB31IMG, i don't have an extra .zip, that's common mistake for me to do so it was first thing to check. ok so that fixed it. i must not have had it formatted correctly, its whatever it was stock
edit: mrozzeh and the rest of the unrevoked team, i would like to say thank you, and thanks for the personal help too.
Sac's Droid said:
OK i just reformatted the sd card to FAT32 and the file i downloaded was PB31IMG, i don't have an extra .zip, that's common mistake for me to do so it was first thing to check. ok so that fixed it. i must not have had it formatted correctly, its whatever it was stock
edit: mrozzeh and the rest of the unrevoked team, i would like to say thank you, and thanks for the personal help too.
Click to expand...
Click to collapse
Anytime. (10 characters blah)
Hold the optical pad and the power button...not the vol down key and give it a shot
Radio update isn't working for me. Saved PB31IMG.zip to the root of my FAT32formatted SD card, rebooted, it found the PB31IMG.zip file, went though the loading process, got the point where it said "checking" and then went back to the menu without loading the update. I've downloaded the radio update twice with the same results. I currently have the 2.05.00.06.11 radio but have not yet installed s -off. Do I need to do that first?
Any other suggestions?
EDIT: Nevermind, I installed the unrevoked forever s -off patch and the radio update seems to be installing now.
EDIT 2: Radio update updates kernal to .32 correct?
Question for anybody that can answer this can we flash any rom from another phone and it will work with the Incredible after we done this to our phone. Thanks.
Milton1964 said:
Question for anybody that can answer this can we flash any rom from another phone and it will work with the Incredible after we done this to our phone. Thanks.
Click to expand...
Click to collapse
Very bad idea...you may end up with a brick using a ROM from a different phone.
Milton1964 said:
Question for anybody that can answer this can we flash any rom from another phone and it will work with the Incredible after we done this to our phone. Thanks.
Click to expand...
Click to collapse
NO
this is not a good idea, junior
jdkoreclipse said:
Is that a definate? I know about bricks annd stuff but in curious.
Ps im not noob
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
how bout the f-in hardware drivers? would that work....
like a napalm full of facepalm
Thanks for the reply. don't want to brink my phone. loving it with all the new updates that are. Thanks again.
Milton1964 said:
Thanks for the reply. don't want to brink my phone. loving it with all the new updates that are. Thanks again.
Click to expand...
Click to collapse
no problem.
(wishful thinking: I wish we could cause Bugless Beast on a Dinc would be pretty awesome)
obededom said:
no problem.
(wishful thinking: I wish we could cause Bugless Beast on a Dinc would be pretty awesome)
Click to expand...
Click to collapse
What just happened to Shadowmite's Unrevoked Forever post in Development. It disappeared?

I want to go from Gingerbread to CyanogenMod

Hello,
Since i heard and readed alot about the cyanogenMod, i wanted to flash my phone to this Rom.After folowing a vid on youtube and some research. I found out that i can't flash to cyanogenMod from android 2.3.3. So my question:
How can i do this?
Grtz
Daan
I just think you can flash it with CWM, as with other ROMs.
But then there is the risk that my phone bricks? witch dont happen if u use nv flash
and if u use nvflash i get an error, and thats because im on 2.3.4
failed executing command 14 nv error 0x120000
lildaan said:
But then there is the risk that my phone bricks? witch dont happen if u use nv flash
Click to expand...
Click to collapse
no your phone will not brick when you really need to be unlucky, all people in here is using cwm to flash with, i think nvflash is only if you want to flash stock rom,
In CWM perform a factory reset, and to be sure, format /system /data /cache, wipe Dalvik cache, and finally flash CM7.
That had nothing to do with your installed version of android, be sure to have CWM 5.0.2.0 to have ext4 compatibility.
oke ill try that thank you for ur reactions
after trying to install cyanogenmod i have problims with prompting to test.
i did everything it sayed but he still sayed no batch found. so im not sure everything works fine, so stuck at the kdb devices.
any tips ore other ways? ore good simpler guides ore movies?
cause the nvflash way is so mutch easyer!
Tnx allready
lildaan said:
after trying to install cyanogenmod i have problims with prompting to test.
i did everything it sayed but he still sayed no batch found. so im not sure everything works fine, so stuck at the kdb devices.
any tips ore other ways? ore good simpler guides ore movies?
cause the nvflash way is so mutch easyer!
Tnx allready
Click to expand...
Click to collapse
What batch are your talking about? In CWM you choose install a zip, select your zip file of CM7, you confirm and that's it... You do it from the phone don't you? CWM is not an external app on the computer... It's a special partition called recovery that you must flash either through ROM manager if you are rooted or through nvflash if not rooted yet (see trymhansen thread in dev section and forget movies and YouTube stuff...)..
http://forum.xda-developers.com/showthread.php?t=1327599
why would you need nvflash? is it the special way to root the device?
Sent from my Optimus 2X using XDA App
grognaz said:
why would you need nvflash? is it the special way to root the device?
Sent from my Optimus 2X using XDA App
Click to expand...
Click to collapse
Yes, GB is hard to root by classic exploits nvflash Burns directly recovery, and then you flash super user app...
http://forum.xda-developers.com/showthread.php?t=1037751
I think your should read a little here too...
well ive do things to mod andoid to make a good usb connection, i saw it in a guide . it sayed if u didnt root yet follow this guide with cwm. so i did something wrong...
i just dont get what root means and how i make a nandroid backup.
thanx for the fast reactions
the problem is the ADB its hard to set up that didnt work out for me and i need it for superoneclick cause when i try this it gets stuck at step 7 it says waiting for device
I finally hot my adb set.. when i try super one click it stops at step 7, and sayed waiting for device.. I really tried every way !
Can close this 1 problem solved, returned to froyo and then to cyanogen.

cant connect to camera error! please help!

zupp guys, so i was out skating yesterday and my phone fell out of my pocket and when i was going to use the camera today i just get the cant connect to camera error! please help a brother out here atleast how i can get my warranty back to fix it? im unlocked with htcdev and still s-on Thanks:fingers-crossed:
alex11x said:
zupp guys, so i was out skating yesterday and my phone fell out of my pocket and when i was going to use the camera today i just get the cant connect to camera error! please help a brother out here atleast how i can get my warranty back to fix it? im unlocked with htcdev and still s-on Thanks:fingers-crossed:
Click to expand...
Click to collapse
run the downgrade script and flash the ruu from this page: http://forum.xda-developers.com/showthread.php?t=1705913
it will downgade your hboot and put gingerbread back on. then you can ota to the newest update and sent it back for warranty.
all you need to do is follow section 1 from that guide. dont do the s off bit ;p
make sure your running a custom rooted rom like cm7 or icecold sandwich and usb debugging is enabled.
naathaanb96 said:
run the downgrade script and flash the ruu from this page: http://forum.xda-developers.com/showthread.php?t=1705913
it will downgade your hboot and put gingerbread back on. then you can ota to the newest update and sent it back for warranty.
all you need to do is follow section 1 from that guide. dont do the s off bit ;p
make sure your running a custom rooted rom like cm7 or icecold sandwich and usb debugging is enabled.
Click to expand...
Click to collapse
Thanks bro, im not there yet but that part about goldcard? do i whant to create one?
alex11x said:
Thanks bro, im not there yet but that part about goldcard? do i whant to create one?
Click to expand...
Click to collapse
shouldnt have to because your already s on. wouldn't hurt but. i answered yes during mine just make sure you back up the sd card because gold card will wipe it
naathaanb96 said:
shouldnt have to because your already s on. wouldn't hurt but. i answered yes during mine just make sure you back up the sd card because gold card will wipe it
Click to expand...
Click to collapse
so should i remove the sd card before doing this?
alex11x said:
so should i remove the sd card before doing this?
Click to expand...
Click to collapse
you need sd card for gold card. just make a new folder on your computer.copy sd contents to that. wipe it. then make gold card

[Q] how to use blackrose hboot?

hi guys.my phone is : Unlock - Downgrade - Recovery - Root - S-Off.
So, now the HBOOT version of my Incredible S is 6.13.1002 (Revolutionary) from Revolutionary.io .
ive heard that the Black Rose HBOOT is better than Revolutionary.
So, ive decided to use BlckRose for my phone.
i read in a forum that it says that :
when you want to use BlackRose HBOOT, you should do these :
1.you should have Revolutionary HBOOT in your phone.
2.you should install HTC Sync.
3.you should turn on USB debugging.
4.you should connect to your PC by USB cable.
5.Run the BlackRose software.
so, i did it ! but just while blackrose was running , it was saying : Permission denied
i even have done it by terminal app in my phone.
you know i have just copied a file named (hboot_blackrose) from the boat folder in blackrose folder and pasted it to my phone's memory card and then installed the Terminal app and opened it and then wrote these words :
PHP:
su
busybox md5sum /sdcard/hboot_blackrose.img
dd if=/sdcard/hboot_blackrose.img of=/dev/block/mmcblk0p18
reboot Bootloader
but in this way that i tried , ive got the same answer : Permission denied !
guys, tell me what to do now? my problem is only blackrose hboot.
i wanna use blackrose hboot, but i dont know how.
thanks a lot.
RCSLIFE said:
hi guys.my phone is : Unlock - Downgrade - Recovery - Root - S-Off.
So, now the HBOOT version of my Incredible S is 6.13.1002 (Revolutionary) from Revolutionary.io .
ive heard that the Black Rose HBOOT is better than Revolutionary.
So, ive decided to use BlckRose for my phone.
i read in a forum that it says that :
when you want to use BlackRose HBOOT, you should do these :
1.you should have Revolutionary HBOOT in your phone.
2.you should install HTC Sync.
3.you should turn on USB debugging.
4.you should connect to your PC by USB cable.
5.Run the BlackRose software.
so, i did it ! but just while blackrose was running , it was saying : Permission denied
i even have done it by terminal app in my phone.
you know i have just copied a file named (hboot_blackrose) from the boat folder in blackrose folder and pasted it to my phone's memory card and then installed the Terminal app and opened it and then wrote these words :
PHP:
su
busybox md5sum /sdcard/hboot_blackrose.img
dd if=/sdcard/hboot_blackrose.img of=/dev/block/mmcblk0p18
reboot Bootloader
but in this way that i tried , ive got the same answer : Permission denied !
guys, tell me what to do now? my problem is only blackrose hboot.
i wanna use blackrose hboot, but i dont know how.
thanks a lot.
Click to expand...
Click to collapse
Although you have Revolutionary S-OFF installed, you apparently do not have a custom rooted ROM installed such as ARHD or CM7/9, etc. That is the reason why the blackrose script is unable to gain SU permission.
blackrose
tpbklake said:
Although you have Revolutionary S-OFF installed, you apparently do not have a custom rooted ROM installed such as ARHD or CM7/9, etc. That is the reason why the blackrose script is unable to gain SU permission.
Click to expand...
Click to collapse
so, which custom ROM do you think i should install , to be able to install blackrose?
please tell me which custom ROMs , can Revolutionary install?
RCSLIFE said:
so, which custom ROM do you think i should install , to be able to install blackrose?
please tell me which custom ROMs , can Revolutionary install?
Click to expand...
Click to collapse
Doesn't matter. You can basically install every rom, except some stock based ROMs and miui. I would suggest Viper or CM, I know they install on revolutionary
Newer versions of tpbklake's stock ROMs work too
CM10
markj338 said:
Doesn't matter. You can basically install every rom, except some stock based ROMs and miui. I would suggest Viper or CM, I know they install on revolutionary
Newer versions of tpbklake's stock ROMs work too
Click to expand...
Click to collapse
hey buddy i found CM10 in this forum. so do you really think it would work?!!!
ok, ill try it.
here is its link : http://forum.xda-developers.com/showthread.php?t=1996570
RCSLIFE said:
hey buddy i found CM10 in this forum. so do you really think it would work?!!!
ok, ill try it.
here is its link : http://forum.xda-developers.com/showthread.php?t=1996570
Click to expand...
Click to collapse
Should be fine
I tried with cm7 and it worked. You need an unsecured boot.img
Sent from one of the few remaining Incredible S'
CM10 & Black Rose
Piccilino said:
I tried with cm7 and it worked. You need an unsecured boot.img
Sent from one of the few remaining Incredible S'
Click to expand...
Click to collapse
yesss !
i have installed the CM7 on my phone and then i puted the BlackRose HBOOT on my phone and it worked as really nice ****ing well !:laugh:
now, ive installed the CM10 on my phone. but before i installed the CM10 i mean when i had the CM7 on my phone , i have tried the MIUI 3.1.11 ROM. but my phone couldnt Run it and the HTC Logo stayed on display and nothing happened.
finally, ive decided to install the CM10. and now i have CM10 JB 4.1 on my phone.:good:
if i got new problem about anything , i would get here , you are the best guys ive ever seen. im saying this because, before i got here , i was in the ****ing forum which is running by stupid guys !
Thanks a lot:good:
RCSLIFE said:
yesss !
i have installed the CM7 on my phone and then i puted the BlackRose HBOOT on my phone and it worked as really nice ****ing well !:laugh:
now, ive installed the CM10 on my phone. but before i installed the CM10 i mean when i had the CM7 on my phone , i have tried the MIUI 3.1.11 ROM. but my phone couldnt Run it and the HTC Logo stayed on display and nothing happened.
finally, ive decided to install the CM10. and now i have CM10 JB 4.1 on my phone.:good:
if i got new problem about anything , i would get here , you are the best guys ive ever seen. im saying this because, before i got here , i was in the ****ing forum which is running by stupid guys !
Thanks a lot:good:
Click to expand...
Click to collapse
A thanks maybe?
Sent from one of the few remaining Incredible S'
I tried a zillion things and got a bunch of different errors, but I won in the end.
I followed this guide and still got a permission denied error until it finally dawned on me I needed to right-click BlackRose_IS.exe and run as administrator... duh.
...But the whole point of it was so I can change my boot logo; now that I go looking for a way to do that, I'm drawing a blank.
Anyone know where to point me?
EDIT: found it.
Here's my version of those directions:
1. Prepare 480*800 bmp file to change
2. nbimg.exe -F [BMP FILE] -n
3. Rename *.nb file to splash1.img
4. With phone in fastboot usb mode, in adb/fastboot directory type 'fastboot flash splash1 splash1.img'

[Q] trouble in installing any file from sd card in recovery menu

Hi..
i want to upgrade my phone from android 2.2 to ice cream sandwich or whatever might b possible..
and i am not much of a tech friendly person.. but have got the basic idea to upgrade from net
My phone doesnt allows me to install anything from sd card or access its contents when it is in android system recovery mode.
First it says "APPLY SDCARD: UPDATE.ZIP".. even when i have'nt copied any .zip file into sd card. .
and when selected.. it says
FINDING UPDATE PACKAGE
OPENING UPDATE PACKAGE
E: CAN'T OPEN SDCARD:UPDATE.ZIP
(no such file or directory)
INSTALLATION ABORTED.
.. be the file copied in sd card or not..
please help..!!
Sounds like you are selecting the install sdcard/update.zip option.
You need to use select zip from sdcard option.
Sent from my GT-S5830 using xda app-developers app
Gur88 said:
Hi..
i want to upgrade my phone from android 2.2 to ice cream sandwich or whatever might b possible..
and i am not much of a tech friendly person.. but have got the basic idea to upgrade from net
My phone doesnt allows me to install anything from sd card or access its contents when it is in android system recovery mode.
First it says "APPLY SDCARD: UPDATE.ZIP".. even when i have'nt copied any .zip file into sd card. .
and when selected.. it says
FINDING UPDATE PACKAGE
OPENING UPDATE PACKAGE
E: CAN'T OPEN SDCARD:UPDATE.ZIP
(no such file or directory)
INSTALLATION ABORTED.
.. be the file copied in sd card or not..
please help..!!
Click to expand...
Click to collapse
LOL!!
FIRST OF ALL, UPDATE YOUR ANDORID VERSION FROM FOYO TO GINGERBREAD!!!
2.2 >>>> 2.3.x then come back here
YOU COULD BRICK YOUR DEVICE!!!
Viper The Ripper said:
LOL!!
FIRST OF ALL, UPDATE YOUR ANDORID VERSION FROM FOYO TO GINGERBREAD!!!
2.2 >>>> 2.3.x then come back here
YOU COULD BRICK YOUR DEVICE!!!
Click to expand...
Click to collapse
Missed that. Well spotted.
Sent from my Galaxy NexAce!
mitchst2 said:
Missed that. Well spotted.
Sent from my Galaxy NexAce!
Click to expand...
Click to collapse
Hellyeah!
"...you can build a house, starting with the roof!!" Troll Maximus
LOL!!
Mitchst2 and me will advice you Gur88!
Viper The Ripper said:
Hellyeah!
"...you can build a house, starting with the roof!!" Troll Maximus
LOL!!
Mitchst2 and me will advice you Gur88!
Click to expand...
Click to collapse
Maybe I should leave the advice to you. After all I missed the obvious
Sent from my Galaxy NexAce!
mitchst2 said:
Maybe I should leave the advice to you. After all I missed the obvious
Sent from my Galaxy NexAce!
Click to expand...
Click to collapse
Don't worry dude!
All of us are here to learn, even about our errors (I think so... if not delete your xda acount xD) , but you never listen to the Troll Maximus! He's very dangerous xD
Very quiet! Has he bricked it
Sent from my Galaxy NexAce!
mitchst2 said:
Very quiet! Has he bricked it
Sent from my Galaxy NexAce!
Click to expand...
Click to collapse
Yes, It doesn't seems good :s
Let's wait for Gur88
mitchst2 said:
Sounds like you are selecting the install sdcard/update.zip option.
You need to use select zip from sdcard option.
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
zip from sd card option is not there.. that is d whole trouble..!
Viper The Ripper said:
Yes, It doesn't seems good :s
Let's wait for Gur88
Click to expand...
Click to collapse
whats getting bricked..!!
and to update to gingerbread.. it needs installation frm sd card.. which is d only problem...!!!!!!
Gur88 said:
whats getting bricked..!!
and to update to gingerbread.. it needs installation frm sd card.. which is d only problem...!!!!!!
Click to expand...
Click to collapse
no no no.... FIRST OF ALL YOU NEED TO UPDATE TO GINGERBREAD, IT'S COMPULSORY, IF YOU DO NOT WANT TO BRICK YOUR DEVICE...
To update to GB you need to flash a official firmware via Odin, or update it using Kies
Once you've done it, you could flash a custom JB rom using CWM 5.0.2.6. FIX
Viper The Ripper said:
LOL!!
FIRST OF ALL, UPDATE YOUR ANDORID VERSION FROM FOYO TO GINGERBREAD!!!
2.2 >>>> 2.3.x then come back here
YOU COULD BRICK YOUR DEVICE!!!
Click to expand...
Click to collapse
i cant.. it wont install anything frm sd card.. read my problem again if u want..!
Gur88 said:
i cant.. it wont install anything frm sd card.. read my problem again if u want..!
Click to expand...
Click to collapse
well my fault, first of all, you don't need a sdcard to update your device from Froyo to Gingerbread via Odin or via Kies
If your device can't read your sdcard, format it, use a usb adapter to farmat your sdcard, maybe it's corrupted
Viper The Ripper said:
well my fault, first of all, you don't need a sdcard to update your device from Froyo to Gingerbread via Odin or via Kies
If your device can't read your sdcard, format it, use a usb adapter to farmat your sdcard, maybe it's corrupted
Click to expand...
Click to collapse
ok.. i ll try..
Viper The Ripper said:
no no no.... FIRST OF ALL YOU NEED TO UPDATE TO GINGERBREAD, IT'S COMPULSORY, IF YOU DO NOT WANT TO BRICK YOUR DEVICE...
To update to GB you need to flash a official firmware via Odin, or update it using Kies
Once you've done it, you could flash a custom JB rom using CWM 5.0.2.6. FIX
Click to expand...
Click to collapse
thnku.. i ll try..
Gur88 said:
thnku.. i ll try..
Click to expand...
Click to collapse
You're welcome
upgraded to gingerbread by usin odin..
thnku fr ur help..
and that installation problem .. i finally got rid of it..!!
now m i ready to upgrade to ics or jellybean??
kindly help again.. O
Gur88 said:
upgraded to gingerbread by usin odin..
thnku fr ur help..
and that installation problem .. i finally got rid of it..!!
now m i ready to upgrade to ics or jellybean??
kindly help again.. O
Click to expand...
Click to collapse
Root your device and install CWM 5.2.0.6. FIX
When you've done it select whatever supported S5830 JB/ICS rom and follow the dev's instruction to install it properly
mmmmm.. how to root??
srry i really dnt knw about any of this..!! :s
need ur help again..!

Categories

Resources