Hi guys!
I have a problem with my Trust bluetooth mouse.
It connects to the phone (shows "connected" on bluetooth device list on the phone) but it doesn't work. No pointer no working buttons.
On Galaxy Note 2 it works fine.
Any idea?
Thanks!
New firmware arrived but bluetooth mouse still not working
We are on firmware 4.2.2 but things are going worse.
Now the mouse cannot pair at all. (Before it paired, connected but nothing happened)
Fu**ing bug!!
IT'S WORKING!!!!
Waited so much but with this last update (4.3) everything works.
Now we can use it like a small laptop!
Enjoy!
Related
Hi guys, i am currently using Rocket Rom v23 and abyss kernel. At first my bluetooth device (wp 250 creative headset) is working just fine. But after several days the bluetooth is not working anymore even though it can recognize the device but when i connect it there is no music playing.
i tested my bluetooth device and it works on my sgs and itouch
i tested my galaxy note bluetooth to pair with sgs and it works
-what i did to resolve it before was to go back stock rom then v22 to v23 but it is hell of a work.
can u pls help me to work around this issue? thank u
kwelito_88 said:
Hi guys, i am currently using Rocket Rom v23 and abyss kernel. At first my bluetooth device (wp 250 creative headset) is working just fine. But after several days the bluetooth is not working anymore even though it can recognize the device but when i connect it there is no music playing.
i tested my bluetooth device and it works on my sgs and itouch
i tested my galaxy note bluetooth to pair with sgs and it works
-what i did to resolve it before was to go back stock rom then v22 to v23 but it is hell of a work.
can u pls help me to work around this issue? thank u
Click to expand...
Click to collapse
I remember I had this problem with Sennheisser MM100 headphones a while back. From memory I unpaired and removed the device, then re-paired the phones. I may have done a reboot of the note after I unpaired the device, can't remember as it was a long time ago. I have not had a problem since.
I have the same problem as kwelito_88. I managed to use my Creative WP-250 headset for just 3 weeks before it decided to stay mumb on me.
I "unpair" the headset with my phone but now my phone just couldn't see this headset when it scans for devices.
Any one out there know how to get both gadgets working again? Thanks.
Do you have a BT laptop you can try pairing your Note with? If it works that will rule out the Note as the problem.
You've probably already fully charged the headset and checked that they are definitely in pairing mode so that the Note can see them? My Sennheisers are bit touchy and didn't go into pairing mode properly until I pressed harder on the switch button.
TempusFudgeIt said:
Do you have a BT laptop you can try pairing your Note with? If it works that will rule out the Note as the problem.
You've probably already fully charged the headset and checked that they are definitely in pairing mode so that the Note can see them? My Sennheisers are bit touchy and didn't go into pairing mode properly until I pressed harder on the switch button.
Click to expand...
Click to collapse
Thanks! I can now confirm the Note is not the problem.. it pair & connect to my BT laptop easily.. So the Creative wp-250 headset is where the fault is. Guess I won't be looking at Creative products for a while.
Thanks for the tip
Hmm. I have a duff/non-compliant Jabra headset too. That tip with pairing with "known good" worked a treat.
Anyone else experience bluetooth connectivity issues on the new 4.2.2 firmware?
My car and BT headphones now take a lot longer to connect and disconnect to the phone compared to previous firmware.
In fact, the first time (after the update) i needed to manually connect to each deivce, almost like I had to remind the phone it was paired with them.
In comparison, my Nexus devices connect almost immediately on 4.2.2
Can anyone who is on 4.2.2 help test this?
Help confirm whether it is just me experiencing this or not. Thanks.
I have the same problem with my Mercedes BT System.
I connect my phone and lost my connection in 3-4min. After 10sec its connected again.
So my temporary work around was this:
1) Disconnect the Phone with my car
2) Clear Connetcion
3) Start new search and conntect the phone to BT
4) Didn´t allow the Mercedes BT to use my sms, contacts and so on.
With this it´s working if the BT System didn´t check my sms and contacts. But erverytime when I switch of the connection or car, I have to disallowed the BT System to check sms and contacts --- so this is only temporare and I hope for a better solution!
(Sry for my writen english - its bad )
My Bluetooth devices connected very quickly.
And no problems with sms and contact request?
Do you made a fullwipe?
My BMW simply won't pair with my XZ since updating to 4.2.2 - was working fine before on 4.1.2, but when I try to pair now, they recognise eachother, and I enter a code on the car to be verified on the phone, but after I enter the code on the phone, it all just freezes. The car sits there saying "Pairing...", but the phone thinks it's all been successful.
I have a bose audio system in my car, my XPERIA Z running PAC Rom - will pair, no audio or phone book exchange, My Dads Xperia z Works fine with stock rom. there is some issue I think with 4.2.2 maybe? I tried the Audio v19 and bluwtooth fix. NO LUCK!
Yes.. Having the same problem as well with Volvo's sensus multimedia system. It used to work fine.. Now it takes multiple tries to get it to connect since 4.2.2
I have the same problem.
I am having the same problem with the sbh25.
When i turn on the headphones my phone registers the pairing but no sound will be on. I have to manually turn the phone to speaker output then back to headphones for the music to stream through the bluetooth headset. This works first time 9/10 times. The other time i have to repeat the output step a couple of times for the music to be heard.
I had a couple of issues too with the latest 4.2.2. on my Kenwood system in the car.
This is terrible, clearly Sony did not thoroughly test the BT stack in this latest firmware.
I can honestly say, BT was pretty much working perfectly on 4.1.2 firmware. I may have to consider downgrading.
Thanks for everyones confirmation.
I'm sure the following is a software issue but I don't know where to report this bug.
When I am listening to music or watching videos on my Note 4 through my Bluetooth stereo headset, I get pops and clicks noises every 2-3 secs and has been driving me up the wall. Talking with someone over the phone through Bluetooth yield no noises. Only way to fix this was to use a wired headphone/headset. My Note 4 is 910C with the latest firmware, not rooted nor modified in any way, everything is at stock.
After a lot of troubleshooting I finally figured it out that it wasn't my BT headset being faulty, nor my Note 4's BT, I will explain below.
I have my Note 4 paired with the following Bluetooth devices:
- LG HBS-900 Headset
- LG HBS-800 (Black) Headset
- LG HBS-800 (White) Headset
- LG HBS-700 Headset
- Sennheiser MM 550-X Headset
- Creative T6 Series II (Desktop PC Speakers that has Bluetooth)
- Samsung Gear Fit Watch
The issue is affecting the HBS-900 and both of the HBS-800. I have done the following which didn't fix the issue:
- Unpair then Re-pair
- Unpaired other headsets
- Restart Phone + Pulled Battery
- Went to "Application manager > Bluetooth" and cleared Cache and cleared Data
- Went to Recovery and cleared the cache
I was left with the last resort to re-flash the latest firmware. But I had a brainwave and decided to unpair the Samsung Gear Fit because out of all the paired devices, only the watch uses Bluetooth 4.0 while the headsets and speaker use Bluetooth 3.0.
Lo and behold, the popping and clicking noises disappeared completely right away. I paired all the other headsets to the phone, and audio was still clear. I replicated the issue again by pairing my Gear Fit back to the Note 4, and immediately the noises were back. And this issue occurs even without having the watch connected to the phone! So now I'm forced to pick either my headset or my watch....
Model N910C
Firmware Origin: XSG (United Arab Emirates)
Firmwares issue experienced: ANK5 and AOA2
Hi budy, have the same problems. But I think problem is between wifi and bluetooth. Whenever there is a information change via wifi to internet there is some strange noice or once in a while bluetooth is bracking up. There might be some frquency problems. So far no solution to these. Just reconnect.......
910f + gear live + connected audio to my home theater by BT , streaming all access music via WiFi = no problem .
Lollipop 5.01 Fixed It...... I think!
quincho54 said:
Hi budy, have the same problems. But I think problem is between wifi and bluetooth. Whenever there is a information change via wifi to internet there is some strange noice or once in a while bluetooth is bracking up. There might be some frquency problems. So far no solution to these. Just reconnect.......
Click to expand...
Click to collapse
Not to do with WiFi in my case. I could have them switch on or off, connected or not connected, the noise will still be there.
But Good News! I saw the official Lollipop for N910C on the other thread, thought what the heck gonna flash it. So I flashed it via Odin but did not wipe my data, seems Bluetooth is behaving now. Maybe the previous mini updates did not do anything to the BT drivers and on Lollipop I saw the version and it's a newer version.
Didn't really want to do this at first cause it's only been released and bound to be buggy, but I did it!
Guys I have a problem with our beloved xperia and I'm posting only now because I am sure now it's actually the phone, not the device (I tried it on an old KitKat Samsung and a nougat moto g... Everything is fine there).
So I have an iPega 9025 bluetooth gamepad which was working all right in my previous Nexus 5.
Here's the problem: FIRST TIME I try to pair the pad everything is fine, gamepad is working as it should be in games, emulators and within the android system. After first use though, if I turn off the gamepad and turn it on again it just doesn't work. I can see the Bluetooth icon in bar system and I see it in Bluetooth settings as Connected, it just does doesn't work.
Before u ask, I already tried going in Scanning settings and play with WiFi Scanning and Bluetooth scanning (on or off) : it doesn't change anything
I also tried in Developer Options in change Bluetooth AVRCP version from 1.6 to 1,4: doesn't change anything.
Bummer, I was planning on heavyly using emulators and games...
Does somebody has my same problem? Or maybe it's just this particular ipega gamepad having some sort of conflict with our xperia? In that case, does somebody is using some other Bluetooth Gamepad and NOT having any problems?
P. S. I'm on last build 47.1.A. 2.374
Nobody...?
Dear all,
The phone work flawlessly, except for a big issue I found on bluetooth.
Once I paired it with my car bluetooth headset, when I leave the car and I get in back later, the phone didn't connect automatically; I've to connect it manually from bluetooth settings section.
Does anyone have had the same issue ?
Is there a fix for it ?
The phone is freshly installed with MIUI8.2.5 Global stable release.
Thanks anybody for supporting..
[EDIT]
After updating to stable 9.2.4 the problem is fixed.