So when you get to the part to enter a pin... a mobile hotspot popup shows telling to contact att... and closes the process.
Has any one been able to connect to it?
...and remember, dont just say yes. explain how you did it.
Seggzy said:
So when you get to the part to enter a pin... a mobile hotspot popup shows telling to contact att... and closes the process.
Has any one been able to connect to it?
...and remember, dont just say yes. explain how you did it.
Click to expand...
Click to collapse
I am having this same issue. I have spammed the connect button and gotten it to work, but that's all. I don't know if disabling the tethering guard would work or not, but that would require root. I just got the phone yesterday, so I haven't had a chance to root it yet.
ok just got off the phone, 70 min later, and she told me that they submited a case order that will "put their top scientists on it". (my words not theirs lol)
i will be contacted within 48 hours with an update, she said.
LimFin said:
I am having this same issue. I have spammed the connect button and gotten it to work, but that's all. I don't know if disabling the tethering guard would work or not, but that would require root. I just got the phone yesterday, so I haven't had a chance to root it yet.
Click to expand...
Click to collapse
what do you mean by "spammed the connect button"?... and it is working now or no?
Seggzy said:
what do you mean by "spammed the connect button"?... and it is working now or no?
Click to expand...
Click to collapse
When you do the three finger swipe or click on the notification, it will take you to the media output menu, I have gotten it to connect by clicking clicking on the panel that says media link device. Normally, when it tries to connect, I get the message that says I need to contact AT&T to allow mobile hotspots, but sometimes after I click cancel and immediately try to reconnect, I am able to bypass the message and it connects. This is rare, so no, I would not say that it is working. I tried configuring the media link with my mobile data turned off, but for some reason, it appears like it is required.
LimFin said:
When you do the three finger swipe or click on the notification, it will take you to the media output menu, I have gotten it to connect by clicking clicking on the panel that says media link device. Normally, when it tries to connect, I get the message that says I need to contact AT&T to allow mobile hotspots, but sometimes after I click cancel and immediately try to reconnect, I am able to bypass the message and it connects. This is rare, so no, I would not say that it is working. I tried configuring the media link with my mobile data turned off, but for some reason, it appears like it is required.
Click to expand...
Click to collapse
ya I've gotten it to connect and stay connected by turning off wifi and mobile then toggling wifi back on then quickly trying to connect... but cant connect to internet without the hotspot popping up and killing it.
Seggzy said:
So when you get to the part to enter a pin... a mobile hotspot popup shows telling to contact att... and closes the process.
Has any one been able to connect to it?
...and remember, dont just say yes. explain how you did it.
Click to expand...
Click to collapse
What is you Rom code? Are u using ATT sim?
cobbcobbdavid said:
What is you Rom code? Are u using ATT sim?
Click to expand...
Click to collapse
umm ya stock rom on att... if i had a custom rom, there wouldnt be a problem, but definitely not unlocking or rooting the first 2 weeks
Seggzy said:
umm ya stock rom on att... if i had a custom rom, there wouldnt be a problem, but definitely not unlocking or rooting the first 2 weeks
Click to expand...
Click to collapse
Stock rom? Did you got ur one already. That is fast, can u let me know which version is ur rom cause i am getting a att One tomorrow.
It seems like they are trying to sucker you into spending more on your plan.
Sent from my SGH-T769 using xda app-developers app
cobbcobbdavid said:
Stock rom? Did you got ur one already. That is fast, can u let me know which version is ur rom cause i am getting a att One tomorrow.
Click to expand...
Click to collapse
yes stock... 1.26.502.10... media link > 5.19.103.1
Phil over at AC says his works fine but his firmware on the media link is 5.19.102.1
Seggzy said:
umm ya stock rom on att... if i had a custom rom, there wouldnt be a problem, but definitely not unlocking or rooting the first 2 weeks
Click to expand...
Click to collapse
Off topic but i hope you at least grabbed your unlock token just in case they block the ONE...
Any new news on this? I had the Media link since Day 1 and it's used primarily as paper weight... Folks should start receiving their back ordered media link and will be suprised that it does not work.. I hope a work around is around the corner
Related
For some reason i can only connect to the app market and the internet if i am on wifi . Has anyone else had this problem and if so is there something i can do to fix this ???
Shake911 said:
For some reason i can only connect to the app market and the internet if i am on wifi . Has anyone else had this problem and if so is there something i can do to fix this ???
Click to expand...
Click to collapse
What exactly are you trying to do? Maybe try to restart you G1 or reboot it. I have never had this problem at all.Maybe check with some other users.
You should change the thread title to something more informative pertaining to your proble. Most of the time, the pros on here will pass by a thread just says help because they don't feel like entering a thread just to see if they *can* help at all. Also, it might allow others who have had the same problem and fixed to easily see your problem and come to the rescue.
Back to the problem at hand. Can you use the mobile data for anything? updating weather etc? If you can't then its probably something to do with your APN settings. Who is your carrier? T-Mobile? AT&T? To check what APNs you have now, go to: Settings>Wireless Controls> Mobile Network>APNs
If it is blank, that's why you can't connect, the phone doesn't know where to connect to. Simply type your carrier into google along with G1 APN settings (ie AT&T G1 APN settings) and they should tell you the correct settings to input in order for you to access your mobile network. Good luck.
P.S. Also add more information about what's going on with your phone so that we can figure it out quicker without having to ask you for everything one-by-one. You can tell us the ROM you're using, whether this is a new problem, or something that's never worked, your wireless carrier, your SSN (just kidding), but come on, some background info could make this process infinitely faster...
h.nocturna said:
You should change the thread title to something more informative pertaining to your proble. Most of the time, the pros on here will pass by a thread just says help because they don't feel like entering a thread just to see if they *can* help at all. Also, it might allow others who have had the same problem and fixed to easily see your problem and come to the rescue.
Back to the problem at hand. Can you use the mobile data for anything? updating weather etc? If you can't then its probably something to do with your APN settings. Who is your carrier? T-Mobile? AT&T? To check what APNs you have now, go to: Settings>Wireless Controls> Mobile Network>APNs
If it is blank, that's why you can't connect, the phone doesn't know where to connect to. Simply type your carrier into google along with G1 APN settings (ie AT&T G1 APN settings) and they should tell you the correct settings to input in order for you to access your mobile network. Good luck.
P.S. Also add more information about what's going on with your phone so that we can figure it out quicker without having to ask you for everything one-by-one. You can tell us the ROM you're using, whether this is a new problem, or something that's never worked, your wireless carrier, your SSN (just kidding), but come on, some background info could make this process infinitely faster...
Click to expand...
Click to collapse
So true! Funny Joke man! Yeah,send over your SSN! Ha Ha Ha!
I can no longer activate my phone and sync to the google servers over 3g. My APN is for sidekick prepaid. Any ideas?
Imperial.mack said:
I can no longer activate my phone and sync to the google servers over 3g. My APN is for sidekick prepaid. Any ideas?
Click to expand...
Click to collapse
T-Mobile blocked it.. I was using the same thing. Im pissed now!
law_ren_ce said:
T-Mobile blocked it.. I was using the same thing. Im pissed now!
Click to expand...
Click to collapse
so you were trying to pay less than everyone else for the same service and got caught with your hand in the cookie jar. and you're pissed? quit whining and just pony up the extra 5 bucks.
opera browser still works tho. Has to have socket connection settings. Anybody find a work around or maybe we can ask the developers to help?
kusotare said:
so you were trying to pay less than everyone else for the same service and got caught with your hand in the cookie jar. and you're pissed? quit whining and just pony up the extra 5 bucks.
Click to expand...
Click to collapse
i agree.i could understand being mad for getting caught with cracked cs4 master collection software but seriously 5 bucks a month? its not the end of the world
You people kill me. Its more than 5 bucks a month because it requires a voice plan...
Imperial.mack said:
You people kill me. Its more than 5 bucks a month because it requires a voice plan...
Click to expand...
Click to collapse
and even with the voice plan its +15 bucks a month, 180 a year.. sorry I must not be bawling like all you guys to want to throw my money away for something that wasn't necessary at the time
So I have a T Mobile G1, and I put my sim card in which is on contract with T Mobile and it won't phone or text and says 'calls are not currently being connected to this number' when someone tries to phone me. When I put it in my old phone it works perfectly. Any reasons for this?
opc100 said:
So I have a T Mobile G1, and I put my sim card in which is on contract with T Mobile and it won't phone or text and says 'calls are not currently being connected to this number' when someone tries to phone me. When I put it in my old phone it works perfectly. Any reasons for this?
Click to expand...
Click to collapse
Did you try calling T-Mobile 1-800-866-2453
The helpline in the UK takes way too long to get through to. I thought I post here as well as trying to get through.
and what was the fix ???
matisamd said:
and what was the fix ???
Click to expand...
Click to collapse
You'd be better off to pm the op because he hasn't updated his post in a couple of months. Just a heads up.
Ok, i have my LG revolution on verizon prepaid which we all know that i can not use 4G with so i do not have a sim card for the 4G to activate, which whats happening once i flashed gingervolt2.0 onto my phone and i can only make emergency calls, but my texts come through fine, but only as a notification and then i can respond. can any one pls help? will i have to put my stock rooted 2.3.4 back on the phone or will i be able to recover a piece from within CWM to make it work again?
Have you tried to switch the service in your,settings to 3g haven't ran into that or had anyone who. Has but maybe it will help worth a try
rocknrolla818 said:
Have you tried to switch the service in your,settings to 3g haven't ran into that or had anyone who. Has but maybe it will help worth a try
Click to expand...
Click to collapse
how would i do that? when i first go into gingervolt it asks me to set the phone up and i try selecting english and it says activating and then says that there is no sim card found. is there a way around that portion. or some how keep those old setting to where i wont have to go through that part?
DROID-it1 said:
how would i do that? when i first go into gingervolt it asks me to set the phone up and i try selecting english and it says activating and then says that there is no sim card found. is there a way around that portion. or some how keep those old setting to where i wont have to go through that part?
Click to expand...
Click to collapse
Have you tried this? http://m.androidcentral.com/bypass-activation-screen-your-android-device
This will bypass the activation screen allowing you to get to your settings.
Sent from my VS910 4G using Tapatalk
KaneOfMars said:
Have you tried this? http://m.androidcentral.com/bypass-activation-screen-your-android-device
This will bypass the activation screen allowing you to get to your settings.
Sent from my VS910 4G using Tapatalk
Click to expand...
Click to collapse
that almost seemed useful til i read further. i dont get that screen. the screen that i get is a screen that has select a language and when i click on english then a banner pops up and says activating and after that it says activation failed which then takes me to a screen that says emergency calls only with a picture of a sim card and doots leading to the VZ symbol.
DROID-it1 said:
that almost seemed useful til i read further. i dont get that screen. the screen that i get is a screen that has select a language and when i click on english then a banner pops up and says activating and after that it says activation failed which then takes me to a screen that says emergency calls only with a picture of a sim card and doots leading to the VZ symbol.
Click to expand...
Click to collapse
see if someone can upload a backup from after activation and upgrade to 2.0?
Sent from my VS910 4G using XDA App
kcarden said:
see if someone can upload a backup from after activation and upgrade to 2.0?
Sent from my VS910 4G using XDA App
Click to expand...
Click to collapse
i found what i was looking for on this forum. it was actually volume up down back button then search key, but thank you so much.
DROID-it1 said:
i found what i was looking for on this forum. it was actually volume up down back button then search key, but thank you so much.
Click to expand...
Click to collapse
Good deal.glad you got it working
Sent from my VS910 4G using XDA
It appears to be a new feature (based on a search the Galaxy S 4 from Sprint is having the same problem) that you can not disable the data and voice roam guards. They are checked and greyed out.
Can anyone on 4.3 uncheck these and if so what ROM are you on?
I can check/uncheck all, running ElipticOne 4.3 v2
bigdaddy619 said:
I can check/uncheck all, running ElipticOne 4.3 v2
Click to expand...
Click to collapse
Strange I am on BadBoy and it is greyed out... Galaxy S 4 users are having the same problem.
I was able to disable them before my phone provisioned... looks like that may be where it is locking it.
I can't use any previous backups (which kinda sucks) but atleast I got them turned off.
numus said:
I was able to disable them before my phone provisioned... looks like that may be where it is locking it.
I can't use any previous backups (which kinda sucks) but atleast I got them turned off.
Click to expand...
Click to collapse
I am sitting 100% stock (un-rooted for now), and I can remove the roaming guards, you may want to check with others using the same ROM as you.
I am also able to toggle them off and on, completely stock and unrooted. I read somewhere if you toggle data mode to CDMA only you can change them, then change it back to CDMA/LTE and they stick. Might wanna give that a try.
I'm on SwG 2.02 and can also check/uncheck all roaming guards.
Perhaps there is an incorrect build.prop edit.
I'm on BadBoy and I can check/uncheck it.
Sent from my HTCONE using Tapatalk now Free
As of 4.3 I can't uncheck them. No one in my house can, all 3 of us are on HTC Ones that have been updated to 4.3 completely stock.
Switching to CDMA Only did not change it, still grayed out.
kwolf said:
As of 4.3 I can't uncheck them. No one in my house can, all 3 of us are on HTC Ones that have been updated to 4.3 completely stock.
Switching to CDMA Only did not change it, still grayed out.
Click to expand...
Click to collapse
I think it is a problem with having old settings on the phone... If I use the HTC restore then I lose the ability to uncheck them, when I do a clean flash without the restore I have no problem unchecking them.
Try a clean wipe (and don't use any restore programs like HTC) and see if you can uncheck them
numus said:
I think it is a problem with having old settings on the phone... If I use the HTC restore then I lose the ability to uncheck them, when I do a clean flash without the restore I have no problem unchecking them.
Try a clean wipe (and don't use any restore programs like HTC) and see if you can uncheck them
Click to expand...
Click to collapse
If I have to choose between installing and re-configuring all my apps again, or having the irritating data roaming message... I'll probably just deal with the message. I don't have time to re-do my phone all over again :/
kwolf said:
If I have to choose between installing and re-configuring all my apps again, or having the irritating data roaming message... I'll probably just deal with the message. I don't have time to re-do my phone all over again :/
Click to expand...
Click to collapse
If you have bluetooth integration in your vehicle, it is more than just an "irritating" message. It actually prevents you from using your car's bluetooth to dial your phone in roaming (the call will always fail unless you manually select the dismiss on the roam notification from the phone). This is more than just irritating. Also will prevent you from streaming music during trips (atleast when you pop in and out of roaming locations) because each time you enter a roaming location you will have to dismiss the guard before it will let you get data on the roaming network.
numus said:
If you have bluetooth integration in your vehicle, it is more than just an "irritating" message. It actually prevents you from using your car's bluetooth to dial your phone in roaming (the call will always fail unless you manually select the dismiss on the roam notification from the phone). This is more than just irritating.
Click to expand...
Click to collapse
I guess I'll just chalk this experience up to HTC's notoriously amazing QA. Maybe I'll re-do my phone this weekend then. We are also having problems where all of our phones are having received SMS timestamps that are 1 hour behind (but only on sprint towers, and only in the tri cities - works fine roaming, in knoxville, or on airave...). Wonder if it's also related to restoring the backup or just Sprint being Sprint.
kwolf said:
I guess I'll just chalk this experience up to HTC's notoriously amazing QA. Maybe I'll re-do my phone this weekend then. We are also having problems where all of our phones are having received SMS timestamps that are 1 hour behind (but only on sprint towers, and only in the tri cities - works fine roaming, in knoxville, or on airave...). Wonder if it's also related to restoring the backup or just Sprint being Sprint.
Click to expand...
Click to collapse
... How close are you to the next timezone?
numus said:
... How close are you to the next timezone?
Click to expand...
Click to collapse
About 3 hours freeway driving. Knoxville is closer and I don't have the problem there. All 3 of our Ones are affected (and we aren't even on the same Sprint plan) but my buddy's iPhone is not. Also, the clock on my phone is always correct and it is set to get the time from the tower. It is only received SMS timestamps that are wrong. A conversation will look like this: Sent message 10:40AM Received message 9:41AM Sent message 10:42AM Received message 9:44AM etc.
I will just reset the phone this weekend, maybe it will be happy again.
kwolf said:
About 3 hours freeway driving. Knoxville is closer and I don't have the problem there. All 3 of our Ones are affected (and we aren't even on the same Sprint plan) but my buddy's iPhone is not. Also, the clock on my phone is always correct and it is set to get the time from the tower. It is only received SMS timestamps that are wrong. A conversation will look like this: Sent message 10:40AM Received message 9:41AM Sent message 10:42AM Received message 9:44AM etc.
I will just reset the phone this weekend, maybe it will be happy again.
Click to expand...
Click to collapse
Did you try toggling the data mode to cdma only and then changing them?
TriBeard said:
Did you try toggling the data mode to cdma only and then changing them?
Click to expand...
Click to collapse
kwolf said:
Switching to CDMA Only did not change it, still grayed out.
Click to expand...
Click to collapse
Posted earlier, no it did not work.
kwolf said:
Posted earlier, no it did not work.
Click to expand...
Click to collapse
Oops. Got that one by me.
Anyone know how to get rid of the hand free activation that pops up everytime i restart my phone?
cudos01 said:
Anyone know how to get rid of the hand free activation that pops up everytime i restart my phone?
Click to expand...
Click to collapse
I haven't gotten around with it yet. The last time I tried, I got the Security Exception. For now I just bear with it, I boot my phone and do something else so that I won't notice. haha.
Will follow this post just to be updated.
ijball said:
I haven't gotten around with it yet. The last time I tried, I got the Security Exception. For now I just bear with it, I boot my phone and do something else so that I won't notice. haha.
Will follow this post just to be updated.
Click to expand...
Click to collapse
Mine never does that. Does it succeed? It must succeed to not pop that up.
One thing I've learned the hard way several times, is if you have AdBlocker running it screws up Activation, Update PRL etc. But you should be able to turn it back on later.
If it is failing activation even with adblocker off try activating with WIFI connection up.
You can also try ##72768# but be warned if it does not succeed you will have no voice or data. I recommend doing this only with a solid Sprint Signal 3G or 4G, but WIFI will work too.
If you call sprint, 99% sure that's the first thing they will try.
If you are using GSM in another country there is an app you can freeze. Look in Sprint M9 forums, this is asked all the time on how to kill it.
mswlogo said:
Mine never does that. Does it succeed? It must succeed to not pop that up.
One thing I've learned the hard way several times, is if you have AdBlocker running it screws up Activation, Update PRL etc. But you should be able to turn it back on later.
If it is failing activation even with adblocker off try activating with WIFI connection up.
You can also try ##72768# but be warned if it does not succeed you will have no voice or data. I recommend doing this only with a solid Sprint Signal 3G or 4G, but WIFI will work too.
If you call sprint, 99% sure that's the first thing they will try.
If you are using GSM in another country there is an app you can freeze. Look in Sprint M9 forums, this is asked all the time on how to kill it.
Click to expand...
Click to collapse
I'm on GSM in another country. I tried methods described before to turn it off before, but I ended up bricking my phone. If I started to be bothered by it again, I might try freezing it. Something I noticed though, I didn't notice the Activation prompt on my recent reboots recently.
For the information of all...
Dont try remove or Rename "LGStartupwizard.apk" remove this APK cause Bootloop and stuck at the "LG Security Error" and the only way to go back to life the G4 is flashing TOT file
cheers!
It might be wonky activating because your on a gsm network with a CDMA based phone.
Sent from my LG-H810 using XDA Free mobile app
soulysephiroth said:
It might be wonky activating because your on a gsm network with a CDMA based phone.
Sent from my LG-H810 using XDA Free mobile app
Click to expand...
Click to collapse
Nope I use this phone in GSM Network and run fast
Sent from my SPH-L720T using XDA Free mobile app
Solution to this on a rooted phone
U will need Shortcut master Elite Installed on you PC
Open Shortcut master press "menu" and press "search" , in search field enter
Code:
iot.ltesetting
and press "search", after search press on the first result "Service Programu" and
press "launch", in new window press "Operation Mode" and change on "Lab Network" after that
your smartphone do reboot.
I have done this on g3 check if that works on G4 as well
parin11 said:
Solution to this on a rooted phone
U will need Shortcut master Elite Installed on you PC
Open Shortcut master press "menu" and press "search" , in search field enter
Code:
iot.ltesetting
and press "search", after search press on the first result "Service Programu" and
press "launch", in new window press "Operation Mode" and change on "Lab Network" after that
your smartphone do reboot.
I have done this on g3 check if that works on G4 as well
Click to expand...
Click to collapse
Thanks Parin,
It worked perfectly on my G4 Sprint..
AVishvas said:
Thanks Parin,
It worked perfectly on my G4 Sprint..
Click to expand...
Click to collapse
Welcome