I cant seem to turn USB debugging on, that prevents me from rooting and installing a Recovery, very annoying, any way of fixing that ?
NightyNight said:
I cant seem to turn USB debugging on, that prevents me from rooting and installing a Recovery, very annoying, any way of fixing that ?
Click to expand...
Click to collapse
Is your trouble on the phone or on PC? you don't need to have USB debugging to be on for Rooting.
Was your USB cable plugged in while trying to turn it on?? USB debugging can't be toggled with USB plugged.
L2Deliver said:
Is your trouble on the phone or on PC? you don't need to have USB debugging to be on for Rooting.
Was your USB cable plugged in while trying to turn it on?? USB debugging can't be toggled with USB plugged.
Click to expand...
Click to collapse
I tried both unplugged and plugged. When I was trying to assign a custom app for debugging it wont list anything. Kinda fixed it by running a separate USB Debugging app with busybox.
Was trying to unlock the bootloader.
One more thing, I've been waiting for like 5 minutes now for the bootloader to unlock, it gives me a "Running factory reset for the first Bootloader Unlock :lease Wait::" is that normal ?
NightyNight said:
One more thing, I've been waiting for like 5 minutes now for the bootloader to unlock, it gives me a "Running factory reset for the first Bootloader Unlock :lease Wait::" is that normal ?
Click to expand...
Click to collapse
i had that problem too. no its not.
L2Deliver said:
i had that problem too. no its not.
Click to expand...
Click to collapse
I have the same problem. How I can fix it?
Related
So I am trying to unlock this Captivate and I Enabled the USB Debugging option when it's plugged into the computer. Problem is, when I actually connect it to the computer, the device doesn't go into USB debugging mode. Any help on this would be appreciated!
onlymojo said:
So I am trying to unlock this Captivate and I Enabled the USB Debugging option when it's plugged into the computer. Problem is, when I actually connect it to the computer, the device doesn't go into USB debugging mode. Any help on this would be appreciated!
Click to expand...
Click to collapse
JB CM10 can't use USB debugging with Sideload Wonder Machine
onlymojo said:
So I am trying to unlock this Captivate and I Enabled the USB Debugging option when it's plugged into the computer. Problem is, when I actually connect it to the computer, the device doesn't go into USB debugging mode. Any help on this would be appreciated!
Click to expand...
Click to collapse
I had this problem few times. I had to pull the battery out and restart the phone. Doesn't hurt in trying this.
has anyone came up with a solution?
After I rooted my 4.4, my Windows XP won't recognize the phone and the phone will only charge when connected to the pc....
Is anyone also having this issue?
Which method of root did you use? Do you have developer options debugging enabled?
Sent on my Gummy running Lenoto X
flashallthetime said:
Which method of root did you use? Do you have developer options debugging enabled?
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
I used this guide: http://forum.xda-developers.com/showthread.php?t=2603358
Yes I do have the usb debugging enabled....
I have already disabled, enabled and nothing....
The only way the phone and the pc detects the usb connection is when I restart the phone in bootloader and then do a normal boot.
alemonte said:
I used this guide: http://forum.xda-developers.com/showthread.php?t=2603358
Yes I do have the usb debugging enabled....
I have already disabled, enabled and nothing....
The only way the phone and the pc detects the usb connection is when I restart the phone in bootloader and then do a normal boot.
Click to expand...
Click to collapse
I've had similar issues a few times and from my end, it seemed to be some kind of quirky driver bug. This might seem so simple it's ridiculous, but the few times it's happened to me, unplugging the device and rebooting both the PC and phone before plugging back in worked. Worth a shot?
Yeah, that works but I don´t want to reboot the phone every time I need to plug it in.
Since I use the Mobizen app to use my phone from the PC at work, I plug in and out about 4 times a day....
sasokutenshin said:
I've had similar issues a few times and from my end, it seemed to be some kind of quirky driver bug. This might seem so simple it's ridiculous, but the few times it's happened to me, unplugging the device and rebooting both the PC and phone before plugging back in worked. Worth a shot?
Click to expand...
Click to collapse
alemonte said:
Yeah, that works but I don´t want to reboot the phone every time I need to plug it in.
Since I use the Mobizen app to use my phone from the PC at work, I plug in and out about 4 times a day....
Click to expand...
Click to collapse
mobizen can be ran wirelessly. why do you need to plug it in exactly?
jayboyyyy said:
mobizen can be ran wirelessly. why do you need to plug it in exactly?
Click to expand...
Click to collapse
Cause you have to be in the same network to connect it wirelessly and the wifi at work is not in the same network as my PC
alemonte said:
Cause you have to be in the same network to connect it wirelessly and the wifi at work is not in the same network as my PC
Click to expand...
Click to collapse
did you try a usb port on the back of the pc? perhaps its a usb 2.0 or 3.0 issue.
jayboyyyy said:
did you try a usb port on the back of the pc? perhaps its a usb 2.0 or 3.0 issue.
Click to expand...
Click to collapse
Tried every port.. Though of that when it started..
alemonte said:
Tried every port.. Though of that when it started..
Click to expand...
Click to collapse
well i wish i could help but i have an unlocked phone so im not sure what your problem is. if rebooting the phone works then it is clearly the phone. you can try to kill the adb server connection in cmd and see if that works.
Code:
adb kill-server
jayboyyyy said:
well i wish i could help but i have an unlocked phone so im not sure what your problem is. if rebooting the phone works then it is clearly the phone. you can try to kill the adb server connection in cmd and see if that works.
Code:
adb kill-server
Click to expand...
Click to collapse
I appreciate your help!
Problem is that the phone only charges when connected by the usb port, so the debugging isn't enabled by the phone and there is no adb connection to kill.
alemonte said:
I appreciate your help!
Problem is that the phone only charges when connected by the usb port, so the debugging isn't enabled by the phone and there is no adb connection to kill.
Click to expand...
Click to collapse
oh, i just assumed since you can start the server on your computer without the phone plugged in and the server stays running even after unplugging the phone that you might could try killing it before plugging the phone back in (assuming you have ran adb commands on that computer and it hasn't rebooted since). But that was just a guess.
Yesterday i got new z1 after replacement.
previously i had rooted, unlocked bootloader and much more in my phone.
but now with the new phone i m always getting msg to connect with USB debugging even when the usb debugging is ON.
i m unable to root my phone.
plz help me with this
vshainky08 said:
Yesterday i got new z1 after replacement.
previously i had rooted, unlocked bootloader and much more in my phone.
but now with the new phone i m always getting msg to connect with USB debugging even when the usb debugging is ON.
i m unable to root my phone.
plz help me with this
Click to expand...
Click to collapse
Hey..
Could you please elaborate your issue a bit? Have you enabled USB debugging? What happens when you run adb devices on your computer?
Untouchab1e said:
Hey..
Could you please elaborate your issue a bit? Have you enabled USB debugging? What happens when you run adb devices on your computer?
Click to expand...
Click to collapse
yup i have enabled the usb debugging. when when i use any thing related to it i get this message - please connect Device with enabled USB-Debugging to your computer
Revoke usb debugging authorisation in developer options
gregbradley said:
Revoke usb debugging authorisation in developer options
Click to expand...
Click to collapse
nothing happens..
actually in previous phone, when turned on debugging for first time it asks something which is not appearing in this phone. i tried flashing 4.2.2 stock and tried again. I got the same result. i reverted back to stock 4.4.4 and still facing the problem
no one to help me :'(
Check any antivirus is not blocking anything
Please run a command window from adb and run this
Code:
adb devices
Make sure you do not have any other adb devices running (Bluestacks etc)
Try a differetnt PC to check if its the phone or PC
Hello everyone,
Yesterday I installed CM13 and it is very good. I haven't found any problem as of now in my phone but I am getting BSOD everytime when I connect the mobile to my PC through USB. I tried everything from changing the cord to changing the usb port, even uninstalled LG drivers but still getting BSOD.
Can anyone help me to understand and solve this. Right now my only option is to take SD card out and connect it using Card Reader. Phone is working smoothly. No issues so far. Its just this problem is bugging me. Appreciate if you guys can help me out. Thank You.
Okay so I am getting BSOD only when I am enabling the USB Debugging. By disabling USB Debugging I am able to connect the phone to PC but it is only in the charging mode. I am not able to access any files. It is showing blank. So what should I do now?
kernel.debugger said:
Okay so I am getting BSOD only when I am enabling the USB Debugging. By disabling USB Debugging I am able to connect the phone to PC but it is only in the charging mode. I am not able to access any files. It is showing blank. So what should I do now?
Click to expand...
Click to collapse
1st: The USB Debugging problem only occurs on Windows, Linux distros are fine
2nd:Just pull out the status bar and click on the charging one. You'll be given 3 options: charging, MTP and PTP. (Sorry if I misspelled the names, it's been a long time since I've done this)
Hyoretsu said:
1st: The USB Debugging problem only occurs on Windows, Linux distros are fine
2nd:Just pull out the status bar and click on the charging one. You'll be given 3 options: charging, MTP and PTP. (Sorry if I misspelled the names, it's been a long time since I've done this)
Click to expand...
Click to collapse
Thank You. I can now access the files.
Yes I am on Windows 10. USB Debugging BSOD is still an issue. So is it okay to keep USB debugging off? I always keep that option enabled cause I thought its an important option if you happen to brick the device. So what is the solution? is this happening for everyone who are on custom rom?
Thanks once again.
kernel.debugger said:
Thank You. I can now access the files.
Yes I am on Windows 10. USB Debugging BSOD is still an issue. So is it okay to keep USB debugging off? I always keep that option enabled cause I thought its an important option if you happen to brick the device. So what is the solution? is this happening for everyone who are on custom rom?
Thanks once again.
Click to expand...
Click to collapse
It's okay to leave it off. If you happen to brick your device, it won't boot, meaning no USB debugging.
Hyoretsu said:
It's okay to leave it off. If you happen to brick your device, it won't boot, meaning no USB debugging.
Click to expand...
Click to collapse
Yes, Never bricked the device Thanks to XDA members who are always there to help novice like me from every situation. Thank You.
Someone post answer in cm13 thread - some issues with drivers from LG with cm roms compilations or something like that. Just UNINSTAL driver from PC and u good to go connect l90 via MTP
You mast UNINSTALL driver from PC and reboot PC.
Then install this drivers and reboot PC:
https://yadi.sk/d/8iKJQLio33FusS
L90 with 5.0.2 stok ROM or CM13 works correctly.
uns8816 said:
You mast UNINSTALL driver from PC and reboot PC.
Then install this drivers and reboot PC:
https://yadi.sk/d/8iKJQLio33FusS
L90 with 5.0.2 stok ROM or CM13 works correctly.
Click to expand...
Click to collapse
so with these drivers no BSOD when u put phone via mtp connection ?
EDIT: i test this so with drivers 4.0.4 there IS NO BSOD in Windows 7
Hello guys
When i try to connect my P9 to my pc with usb nothings happening. It only charges the phone. I have tried to reset the phone but nothing different is happening, it also does not want to boot into fastboot mode...
by the way bootloader is unlocked
Would really appreciate some help here
hadidwahedi1 said:
Hello guys
When i try to connect my P9 to my pc with usb nothings happening. It only charges the phone. I have tried to reset the phone but nothing different is happening, it also does not want to boot into fastboot mode...
by the way bootloader is unlocked
Would really appreciate some help here
Click to expand...
Click to collapse
Go to the the developer options and turn on "Always prompt when connecting to USB" . Should work.
Jan Philipp said:
Go to the the developer options and turn on "Always prompt when connecting to USB" . Should work.
Click to expand...
Click to collapse
Tried that, but that doesn't work either