Hello !!
I have a LG Thrill P925G Rooted + CWM Im getting tired of CWM and want to remove it ? is there any possible way i can remove it without bricking my phone ? I Want It To Go Back To Stock Everything
Please If Someone Can Help Me With This Situation
- ROM MANAGER IS NOT GOOD
Either flash back to stock using whatever tool you used to upgrade to ICS or you can try twrp recovery.
Twrp is my favorite. You can use the aio tool listed in the android development section to get to twrp. Doesn't list a stock recovery to flash in the aio tool.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Related
Hi, people i've kinda messed up, i'm new to android and i wanted to try a new rom after i've rooted my phone. now i want to restore it back to default rom, because CM7 didn't function as whished.
i've backed the orginial rom up with rom manager, but when i enter recovery mode using clockwork it all seems fine untill after restore were my phone won't boot
any suggestions?
Think you have to use the ext4toext3 Paul have made.
Search for it in the developer forum
Sent from my LG-P990 using Tapatalk
dosen't help me much can you explain further? seems like i'm stuck in clockword recovery mode. i might need to install a new rom?
Just go into recovery mode and flash stock rom and baseband using smartflash
Sent from my LG-P990 using XDA App
CM7 is EXT3, so I can't see that fix helping. NVflash back to stock, install ClockworkMod the restore /data
Smartflashtool can't find my phone, now it've got in to S/W upgrade and now i'm stuck with please wait while upgrading
ronnow1000 said:
Smartflashtool can't find my phone, now it've got in to S/W upgrade and now i'm stuck with please wait while upgrading
Click to expand...
Click to collapse
If you had cm7. Youve deleted the LG usb drivers. Re install them.
Sent from my LG-P990 using XDA App
no i don't think so hmm, i've just attemped to reinstall them but it's says that they're there
Try NVflash instead then
can't find the compnent in device mananger for NvFlash, and i've tryed two computers for smart flash, can't detect the phone
Hi I don't know how to put my phone to recovery mode? Is there a way and guide to to it?
Root your device, and then flash clockworkmod recovery with rom manager (from the market) and press reboot into recovery. Make sure you know what you're doing in there!
But my device is only rootable via recovery mode.
Sent from my LG-SU660 using XDA App
help us a have the same problem, i can't root my lg su660 android 2.3.4
bahamut10 said:
help us a have the same problem, i can't root my lg su660 android 2.3.4
Click to expand...
Click to collapse
Try it via ADB. Here's a good read http://wiki.cyanogenmod.com/wiki/LG_Optimus_2X:_Full_Update_Guide
It should (theoretically) work
My Galaxy Note wont boot after using cwm.zip & says entended comand notpresent, have still got access to both download & recoverymode.. Been given fewideas but never seem to work ???? i need laymens terms lol
which recovery do you have now ? stock or custom (cwm) ?
CWM.zip is unsafe, im suprised you found a download link for it, i thought they'd all been removed.
anyway, download philz kernel and flash it in stock recovery, or cwm recovery, this should fix you up, if not you may need to reflash stock firmware.
tell me your current rom / android version and ill find you the correct recovery to flash.
You need to post your current rom and kernel and details of what you're trying to flash.
Sent from my GT-N7000 using xda premium
Hi guys,
I have a big problem and hope that someone can help. Today i rooted my note and i proceed in updating my kernel(used GL_HYDRACORE_v7_STD with mobile odin pro). After i flashed it my phone won't boot i can only see samsung galaxy note and that's it.
What can i do?
Thanks in advance.
You have to be more specific and give details.
What was the rom and kernel when your phone was okay.
How you did the rooting.
Did you confirm rooting.
Did you try to flash any other rom or just kernel.
Are you able to go to recovery and/or download mode.
Sent from my GT-N7000 using xda premium
dsmas said:
You have to be more specific and give details.
What was the rom and kernel when your phone was okay.
How you did the rooting.
Did you confirm rooting.
Did you try to flash any other rom or just kernel.
Are you able to go to recovery and/or download mode.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Phone was on stock 4.0.4 i think, haven't flashed any other rom.
Root was oke rooted from recovery with Root_SuperSu 0.95
root was confirmed with root checker
i can go to recovery vol up + home + power
Until now brick isn't confirmed here. Think positive.
Alternatives:
In recovery: restore a backup - if you made one.
In recovery: install philz kernel, reboot into recovery, install a Custom Rom
In download mode: install a Stock Rom oder a prerooted Rom with PC Odin
Then we continue with analyzing - if not already solved then.
ThaiDai said:
Until now brick isn't confirmed here. Think positive.
Alternatives:
In recovery: restore a backup - if you made one.
In recovery: install philz kernel, reboot into recovery, install a Custom Rom
In download mode: install a Stock Rom oder a prerooted Rom with PC Odin
Then we continue with analyzing - if not already solved then.
Click to expand...
Click to collapse
i am new to android so i need a detailed tutorial on how to do these things.
Didn't make backup.
Well there are very detailed guides here http://forum.xda-developers.com/forumdisplay.php?f=1346&nocache=1 Just take your time.
1:- search for speedmod kernel (as Philz needs information to match your ROM), connect your Phone to PC and see if you can put that zip on SD card. then boot your phone in recovery Vol up etc and flash that zip.
reboot recovery and wipe data Factory reste and dalvik. reboot phone and hope it works.
If not then from same forum find a suitable ICS/GB rom and flash it using PC Odine. detailed giud and downloads are in same thread.
BTW. This galaxy note I have is my first Android phone and I have not only soft bricked it once and recovered, but also have flashed 7 different roms my current rom is 4.1.2 JB. And I did all this just by reading these forums. you check my post count. So my suggestion is take your time, search for correct threads and trust me there are more than enough people here to help.
You are right. I have flashed several ics and leaked jb custom roms and note is my first smart phone. Believe me, not even a soft brick. All because reading in details of this forum, before doing anything.
Sent from my GT-N7000 using xda premium
as already suggested by ThaiDai
In download mode: install a Stock Rom oder a prerooted Rom with PC Odin
Click to expand...
Click to collapse
follow the above step to get back to where you were initially and then start again..
Thank you guys for all your help.
Solved. Used 4.1.1 JB official rom and updated. Now working just fine.
:good::good::good::good::good:
TeCHnO4EveR said:
Thank you guys for all your help.
Solved. Used 4.1.1 JB official rom and updated. Now working just fine.
Click to expand...
Click to collapse
There is another way to say thanks, hit the thanks button for the guys who helped you.
Sent from my GT-N7000 using xda premium
Hi Guys,
I have my x8 phone running on nAa's latest v6 kernel with ZenceFil ROM(GB 2.3.7) with ofcourse an un-locked bootloader. But now i want to move back to stock settings.
I had made a backup using xRecovery before installing these mods, so my question is, how to I restore that xRecovery backup along with the stock kernel which i already got from the unlock bootloader thread??
I tried flashing the stock kernel but then the phone just get's stuck in the boot logo page with Sony Ericsson logo, can't even open the recovery, which i guess is not included in the stock kernel file.
I tried installing xRecovery by copying its files to /system/bin but still i have CWM as recovery!
Please advise...
p.s. I saw this thread, but the solution provided there is not working for me as PCC is not helping, it juts say's no s/w found for your device. Also I don't want to lock the boot loader.
Flash stock 2.1 trough flash tool>root it>instal xrecovery and then restore backup.
iks8 said:
Flash stock 2.1 trough flash tool>root it>instal xrecovery and then restore backup.
Click to expand...
Click to collapse
I have downloaded the stock 2.1 rom but how do i flash a ROM using flash tool? I don't see that option..
Flash it like kernel.
Sent from my GT-P3110 using Tapatalk 4
NAA6 is using difrent system-data partition size. If you want to move to other kernel you need first boot into cwm and format data and system partitions, then flash other kernels.
You can also flash your phone with SEUS and you will have stock rom-kernel like you had when you bouth the phone (if your bootloader was unlocked SEUS will leave it unlocked).
Stock rom and kernel you can flash using Flash Tool, just move the ftf file (for exemple 2.1.1.C.0.0.ftf) move this to the FIRMWARE flashtool' folder. Open flash tool and click on the "lightning" icon, (on old version click on flash) and select flash mode. Turn off the phone and flash it like a normal kernel.
But the stock rom that i downloaded has no ftf file! It's a normal backup have 4 .img files.. how do i flash that?
Sent from my Canvas 2 using XDA Developers App
You could use SEUS. It will install the newest firmware for x8 and it won't relock bootloader (for me it don't relock it), but you have to root your phone and install xrecovery one more time.
AndroidNotMaster said:
You could use SEUS. It will install the newest firmware for x8 and it won't relock bootloader (for me it don't relock it), but you have to root your phone and install xrecovery one more time.
Click to expand...
Click to collapse
Thats way i do it. Nice and easy way
Sent from my X8 using xda premium
Thanks will try that.. Can you please provide a link from where i can get SEUS
Sent from my Canvas 2 using XDA Developers App
ibshar said:
Thanks will try that.. Can you please provide a link from where i can get SEUS
Sent from my Canvas 2 using XDA Developers App
Click to expand...
Click to collapse
Search here
http://www.google.co.in
Sent from my iPhone :silly: don't flame me
wanna hang out with us? click here
stock kernal for canvas 2
I have been using canvas 2 from the past 3 months and I have flashed a custom kernel in it and now I get a error-
"Can't connect to camera" whenever I try to run it
Please help me by giving sugetions to fix it or
Please please please give me a link to the stock kernal
I am using thunder zap for now and its horrible
Please help me its urgent.:crying:
This is not the correct thread to post ur query, please move to the Micromax A110 thread and post there.. You also need to specify which rom you are using!
Sent from my Canvas 2 using XDA Premium 4 app