Hi folks,
here's an easy-to-install busybox for your Galaxy Tab 2. NOW with Cyanogen Mod support.
ChangeLog:
BusyBox 1.21.0-git Nano1 (2012-07-28): initial release
BusyBox 1.21.0-git Nano2 (2012-07-29): applied various patches:
BUGFIX: flush all open files after listing them (ls)
BUGFIX: when setting hostname from file p**** whole name
COMPAT: ps now accepts (= ignores) all options a POSIX ps should
allow passing -mthumb to make
ash applet now exports HOME
silently ignore processes from inittab with terminal names without matching device file
default behaviour of 'showkey' applet changed from displaying interpreted keycode to decimals
do not show a message when testing an uninitialized variable
changed some terms in top applet output (rss vs. vsz)
BusyBox 1.21.0-git Nano3 (2012-08-05): major fix
NEW: rfkill applet¹
several minor modifications to applet
BUGFIX fixed a bug in busyinstall that left system without 'sh' upon uninstall²
provide busybox-patches to the world
BusyBox 1.21.0-git Nano4 (2012-08-15): minor fix / cm 10 edition
updated to latest git (some bugfixes)
BUGFIX: reading profile now works
BUGFIX: adjusted shell paths
BUGFIX: history now works
BUGFIX: no longer replace reboot on stock rom³
NEW: Cyanogen Mod edition (tested on cm10)
¹ Either redo 'busyinstall install', or do 'ln -sf /system/bin/busybox /system/bin/rfkill'
² You can find the original sh in you CWM backup, or here: http://www.nanolx.org/downloads/P3110/original-sh
If you didn't get /system/bin/sh.orig after 'busyinstall install', use this file as /system/bin/sh.orig
³ push new busyinstall into tablet to ensure future install/uninstall is fine. then do 'mv /system/bin/reboot.orig /system/bin/reboot'
from within 'adb shell' as root to get original reboot back.
Prerequisites:
* root access on your Tablet
Download:
busybox (normal): http://www.nanolx.org/downloads/P3110/busybox-nano4
busybox (debug): http://www.nanolx.org/downloads/P3110/busybox_unstripped-nano4
busyinstall (installer/stock): http://www.nanolx.org/downloads/P3110/busyinstall
busyinstall (installer/cm10): http://www.nanolx.org/downloads/P3110/busyinstall-cm
profile (optional): http://www.nanolx.org/downloads/P3110/profile¹
busybox (patches): http://www.nanolx.org/downloads/index.php?dir=P3110/busybox-patches/
¹ profile is a generic file, read on each startup of busybox. Mine sets HOME to /,
and puts /system/xbin/ in front of /system/bin/ in PATH. You can also adjust the
prompt (PS1) or whatever here, it's valid for all users. You could check for
'$(id -u) == 0' to adjust prompt for root, if not 0, for ordinary user.
Ordinary user should get 'busybox (normal)', rather than 'busybox (debug)'.
NEW INSTALLATION (STOCK ROM):
Putting busybox on internal sd-storage:
Code:
adb push busybox /mnt/extSdCard/
adb push busyinstall /mnt/extSdCard/
replace "extSdCard" if you saved busybox somewhere else
Code:
adb shell
su
chmod 0777 /mnt/extSdCard/busybox
chmod 0777 /mnt/extSdCard/busyinstall
/mnt/extSdCard/busybox remount -o rw,remount /system
/mnt/extSdCard/busybox mv -f /mnt/extSdCard/busybox /system/bin/
/system/bin/busybox mv -f /mnt/extSdCard/busyinstall /system/bin
busyinstall install
NEW INSTALLATION (CYANOGEN ROM):
Putting busybox on device:
in Settings > Development > set 'root access' to 'apps + adb'
Code:
adb root
adb shell
busybox mount -o rw,remount /system
exit
adb push busybox /system/xbin/busybox.nano
adb push busyinstall /system/bin/busyinstall
adb push profile /system/etc/profile # optional, if downloaded profile
adb shell
chmod 0777 /system/bin/busyinstall
busyinstall install
UPDATE:
Just download busybox, busyinstall and replace the ones in /system/bin/ - it will instantly work:
Code:
adb push busybox /system/bin/
adb push busyinstall /system/bin/
adb shell
su
toolbox chmod 0777 /system/bin/busybox # if you use windows, the executable bit might be missing in the uploaded file
chmod 0777 /system/bin/busyinstall
UNINSTALLATION:
Code:
ab shell
su
busyinstall --
That's it!
I tested everything and it does work perfect, either way a backup (CWM) is always recommened, when working around with stuff down the stack.
Suggestions welcome.
Out of curiosity, what is the difference between what this does and what BusyBox (by Stericson) from the Play Store does?
Sent from my MB855 using Tapatalk 2
Jleeblanch said:
Out of curiosity, what is the difference between what this does and what BusyBox (by Stericson) from the Play Store does?
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
mine is a newer version
has all features of busybox (stericsons free version does not have all applets in busybox enabled, eg. 'sh' applet is missing)
installation 100% GT-P3XXX optimized
As of now, mostly personal preference I'd say.
Edit: But I'm currently applying stuff from busybox-power (maemo) which adds serveral bugfixes and stuff to busybox.
OK, improved version of busybox available in post 1 (+ changelog)
OK, thanks for letting me know!
I actually haven't done much with my Tablet lately as I've been busy with my phone as that now has CM10 too
But once I get my phone all set I'll use your BusyBox and give it a go!
Also, you said your busybox version is newer...but busybox via my phone is version 1.20.2. Just letting you know!
Thanks for this btw, I'd rather have a modified version optimized for my tablet versus a more universal version so to speak. Plus, with your updated applets! Thanks!
Sent from my MB855 using Tapatalk 2
Jleeblanch said:
Also, you said your busybox version is newer...but busybox via my phone is version 1.20.2. Just letting you know!
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
Oh, ... mine is 1.21.0-git - fixed the typo
First,thank you for your work,second I've a question: I've an p3100 (wifi+gsm) ,it rooted on stock 4.0.4 ,and no busybox installed.It has 16gb onboard ,and I don't have at the moment any external microsd in slot,I've ordered an 32gb,but it hasn't come yet.Can you please tell me if it's safe puting your files in /sdcad (not ExtSdCard like you wrote) and give the commands using ''sdcard'' word ?
For e.g:
db shell
su
/mnt/sdcard/busybox remount -o rw,remount /system
I need busybox to backup my /efs folder ,but I don't want to screw something,so please tell me if it is safe to use internal memory (sdcard) for busybox install?Also ,when I'll receive the microsd ,I will need to install again busybox with your original commands from this topic ?
Thanks a lot!!
Best Regards!
viasat said:
First,thank you for your work,second I've a question: I've an p3100 (wifi+gsm) ,it rooted on stock 4.0.4 ,and no busybox installed.It has 16gb onboard ,and I don't have at the moment any external microsd in slot,I've ordered an 32gb,but it hasn't come yet.Can you please tell me if it's safe puting your files in /sdcad (not ExtSdCard like you wrote) and give the commands using ''sdcard'' word ?
For e.g:
db shell
su
/mnt/sdcard/busybox remount -o rw,remount /system
I need busybox to backup my /efs folder ,but I don't want to screw something,so please tell me if it is safe to use internal memory (sdcard) for busybox install?Also ,when I'll receive the microsd ,I will need to install again busybox with your original commands from this topic ?
Thanks a lot!!
Best Regards!
Click to expand...
Click to collapse
Of course you can. It does not matter where you put busybox. All that matters is, that you adjust the commands to your path.
In your you would push the files using ADB, like
Code:
adb push busybox /mnt/sdcard
adb push busyinstall /mnt/sdcard
also you don't need to re-do this when you got your sd-card, because during the steps you move busybox/busyinstall into /system/bin/.
Edit: updated instructions to clarify this.
Ok,thank you for your time,everything it's clear now.I'll try later,when I'm going home.
Cheers!
---------- Post added at 07:04 PM ---------- Previous post was at 06:11 PM ----------
OK,first problem:when I try to execute the first comand,it gives me ''permission denied'',so after a little reading,because my kernel it's stock,I've installed Chainfire's ''adbd Insecure v1.0 '' http://forum.xda-developers.com/showthread.php?t=1687590 to give me rights.After that I've no more errors,but,when I execute first command in adb,it says nothing,just hanging,and adb doesn't come back to # symbol ,and because of that I can't execute the next command.Any ideea what I'm doing wrong?Thanks!
What command failed?
Gesendet von meinem GT-P3110 mit Tapatalk 2
I don't know how to explain,it not really failed, but when I type
/mnt/sdcard/busybox remount -o rw,remount /system the adb doesn't return anything back,and doesn't come back to # symbol ,it just staying,nothing more,no response.I was waiting 2 minutes,and nothing ,doesn't return to # .I can type the next command
/mnt/sdcard/busybox mv /mnt/sdcard/busybox /mnt/sdcard/busyinstall /system/bin/
it's the same,no output,nothing.
Can you please tell me what I'm doing wrong?
Thanks again!
Now I'm stuck,even with adbd insecure activate I cannot execute commands:
C:\Documents and Settings\X\Desktop\ADB>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[email protected]:/ # /mnt/sdcard/busybox remount -o rw,remount /system
/mnt/sdcard/busybox remount -o rw,remount /system
/system/bin/sh: /mnt/sdcard/busybox: cannot execute - Permission denied
126|[email protected]:/ # /mnt/sdcard/busybox mv /mnt/sdcard/busybox /mnt/sdcard/busy
install /system/bin/
dcard/busybox /mnt/sdcard/busyinstall /system/bin/ <
/system/bin/sh: /mnt/sdcard/busybox: cannot execute - Permission denied
126|[email protected]:/ #
Maybe I need first to install Stericsson's busybox from Market?At the moment,as I said before I don't have busybox installed at all,only su.
One more thing,every time when I save from your link busyinstall,no matter what browser,the file is saved as busyinstall.txt
It is normal ,or I need to rename it?
Thanks a lot!
Hmm... seems I forgot a little thing.
do this after you put busybox on tablet, before anything else:
Code:
adb shell
su
chmod 0777 /mnt/sdcard/busybox
then follow the rest of the instructions.
/goingtofixfirstpost
Same story,take a look:
[email protected]:/ # chmod 0777 /mnt/sdcard/busybox
chmod 0777 /mnt/sdcard/busybox
[email protected]:/ # chmod 0777 /mnt/sdcard/busyinstall
chmod 0777 /mnt/sdcard/busyinstall
[email protected]:/ # /mnt/sdcard/busybox remount -o rw,remount /system
/mnt/sdcard/busybox remount -o rw,remount /system
/system/bin/sh: /mnt/sdcard/busybox: cannot execute - Permission denied
126|[email protected]:/ #
Hmmm... > could you provide me the details of 'adb logcat'? Ensure to run those commands while logging.
Gesendet von meinem GT-P3110 mit Tapatalk 2
I don't know if this is what you want,but here we go:
I'm going to check your logs soon and report back.
Meanwhile I updated to Nano3 - see first post.
I got no clue why it does not work for you, but me.
What boot image and ROM are you using? Default boot/ROM, rooted boot/ROM, cyanogen?
I only tested default ROM with my boot. Currently testing cyanogenmod 10, but except some adjustments to busyinstall it will work there, too.
Sorry for the late reply,I'm on vacation until Sunday,and my acces to internet it's very limited here.Now,regarding my problem,first when I got the tablet it was on stock 4.0.3 ,wich I rooted manually to keep the counter to 0 (for warranity) ,and after that I updated to stock 4.0.4 using Mobile Odin Pro,with Everoot option ( it's rooting the rom on the fly) .So now I'm rooted on stock 4.0.4 ,stock recovery, and no busybox installed.I fell more secure and want to install your busybox version,because it's specialy designed for tab2,and it's has features from Maemo (I'm a big fan,I owned an N800,and I've also an N900 ).Maybe,if you have the time and the skills,you can pack it on an .apk version,if it's possible,of course.I will try more Sunday,when I'll be back home.Thanks again for your patience and help.Best Regards!
It will be great if we have a kernel (even stock) with CWM and this busybox...
I am also rooted with flash counter 0 and stock recovery.
Sent from my GT-P3110 using Tapatalk 2
Maybe some contributor creates a flashable zip (for CWM).
So... uploaded 1.20.1-Nano4. See first post for changes.
This time an addtional install-script for cyanogen mod was added, along some fixes.
ah... and: 100th post
The general API level for odexed apps and framework in ICS and Jellybean is higher (15) than the Gingerbread so the apps in ICS and Jelly bean need to be deodexed differently. Here's is a much general and 100% successful way of deodexing those apps and pushing them into system. I know some of you might suggest dsixda kitchen but thats just limited to Linux or cygwin users. So i am gonna talk fully about how to deodex them samsung apps.
First of all what is deodexing:
Here's a good guide:
http://www.wugfresh.com/guides/deodex/ (do not use the guide to deodex you might brick your device)
Now let us actually proceed with deodexing system files:
1. Gain the actual .odex files be it by copying from actual system files or by extracting the firmware fresh
2. Download the following tool (auto deodex tool 1.0.3): (thanks to xavierjohn22)
http://forum.xda-developers.com/showpost.php?p=13254199&postcount=3
3. Extract it inside a folder.
4. Place the respective system/app files to be deodexed in _app
and system/framework files to be deodexed in _framework
5. Run Autodeotoolmain.bat
6. First deodex jar files (ie _framework files) ress 5
7. It will take some time.
8. Your deodexed files will be in deodexed_jar folder
9. Deodexing apps requires some extra steps
10. Download the attached file java.awt.jar
11. Place the java.awt.jar file in deodexed_jar folder
12. Now to deodex .apk files press 4.
13. Use the following as your boot class path:
Code:
am.jar:android.policy.jar:android.test.runner.jar:apache-xml.jar:bmgr.jar:bouncycastle.jar:bu.jar:com.android.future.usb.accessory.jar:com.android.location.provider.jar:com.google.android.maps.jar:com.google.android.media.effects.jar:com.google.widevine.software.drm.jar:com.samsung.device.jar:core.jar:core-junit.jar:ext.jar:filterfw.jar:framework.jar:framework2.jar:GlobalConfig.jar:ime.jar:input.jar:javax.obex.jar:libvtmanagerjar.jar:minimode.jar:monkey.jar:pm.jar:sec_feature.jar:seccamera.jar:secframework.jar:sechardware.jar:secmediarecorder.jar:services.jar:svc.jar:twframework.jar:java.awt.jar
14. Press enter and drink some coffee or do something else it takes very long time.
15. After completion those apps will be stored in deodexed_apk
16. Now some jars and apks remain in _framework those do not need to be deodexed. Copy those files in deodexed_jar
17. Now copy deodex_jar folder and deodexed_apk folder to your phone (make sure unknown sources and usb debugging are on)
18. Unplug your phone once and let media scanning run
19. Plug you phone again and in windows command prompt fire in adb and type in following code:
adb shell
su
stop
mount -o remount,rw /dev/block/mmcblk0p9
/system rm
/system/app/*.odex
rm /system/framework/*.odex
busybox cp /sdcard/deodexed_APK/* /system/app/
busybox cp /sdcard/deodexed_JAR/* /system/framework/
chmod 644 /system/app/*
chmod 644 /system/framework/*
mount -o remount,ro /dev/block/mmcblk0p9 /system
sync
reboot recovery
Click to expand...
Click to collapse
20. In recovery wipe cache, dalvik and do a factory reset. Reboot (initially may take some time be patient)
21. Congratulations you are deodexed
thats nice
nice....
Thankyou ( +1 :good: )im looking this one!
Thnx ^^
thanks...
I found an options to optimize app, is it helpfull?
samyam2002000 said:
The general API level for odexed apps and framework in ICS and Jellybean is higher (15) than the Gingerbread so the apps in ICS and Jelly bean need to be deodexed differently. Here's is a much general and 100% successful way of deodexing those apps and pushing them into system. I know some of you might suggest dsixda kitchen but thats just limited to Linux or cygwin users. So i am gonna talk fully about how to deodex them samsung apps.
First of all what is deodexing:
Here's a good guide:
http://www.wugfresh.com/guides/deodex/ (do not use the guide to deodex you might brick your device)
Now let us actually proceed with deodexing system files:
1. Gain the actual .odex files be it by copying from actual system files or by extracting the firmware fresh
2. Download the following tool (auto deodex tool 1.0.3): (thanks to xavierjohn22)
http://forum.xda-developers.com/showpost.php?p=13254199&postcount=3
3. Extract it inside a folder.
4. Place the respective system/app files to be deodexed in _app
and system/framework files to be deodexed in _framework
5. Run Autodeotoolmain.bat
6. First deodex jar files (ie _framework files) ress 5
7. It will take some time.
8. Your deodexed files will be in deodexed_jar folder
9. Deodexing apps requires some extra steps
10. Download the attached file java.awt.jar
11. Place the java.awt.jar file in deodexed_jar folder
12. Now to deodex .apk files press 4.
13. Use the following as your boot class path:
Code:
am.jar:android.policy.jar:android.test.runner.jar:apache-xml.jar:bmgr.jar:bouncycastle.jar:bu.jar:com.android.future.usb.accessory.jar:com.android.location.provider.jar:com.google.android.maps.jar:com.google.android.media.effects.jar:com.google.widevine.software.drm.jar:com.samsung.device.jar:core.jar:core-junit.jar:ext.jar:filterfw.jar:framework.jar:framework2.jar:GlobalConfig.jar:ime.jar:input.jar:javax.obex.jar:libvtmanagerjar.jar:minimode.jar:monkey.jar:pm.jar:sec_feature.jar:seccamera.jar:secframework.jar:sechardware.jar:secmediarecorder.jar:services.jar:svc.jar:twframework.jar:java.awt.jar
14. Press enter and drink some coffee or do something else it takes very long time.
15. After completion those apps will be stored in deodexed_apk
16. Now some jars and apks remain in _framework those do not need to be deodexed. Copy those files in deodexed_jar
17. Now copy deodex_jar folder and deodexed_apk folder to your phone (make sure unknown sources and usb debugging are on)
18. Unplug your phone once and let media scanning run
19. Plug you phone again and in windows command prompt fire in adb and type in following code:
20. In recovery wipe cache, dalvik and do a factory reset. Reboot (initially may take some time be patient)
21. Congratulations you are deodexed
Click to expand...
Click to collapse
thanks mate now i used it XD
ICS_XD said:
thanks mate now i used it XD
Click to expand...
Click to collapse
so that means the GAME HAS BEGUN
incarnation95 said:
so that means the GAME HAS BEGUN
Click to expand...
Click to collapse
Yeah XD
Sent from my GT-I9100G using xda premium
delete java.awt.jar from deodexed_JAR after DEODEXED?
Can someone help me? i dont know why i get permission denied
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\user>adb shell
[email protected]:/ # su
su
[email protected]:/ # stop
stop
[email protected]:/ # mount -o remount,rw /dev/block/mmcblk0p9
mount -o remount,rw /dev/block/mmcblk0p9
[email protected]:/ # /system rm
/system rm
sh: /system: cannot execute - Is a directory
126|[email protected]:/ # /system/app/*.odex
/system/app/*.odex
sh: /system/app/AccuWeatherDaemonService.odex: cannot execute - Permission denie
d
126|[email protected]:/ #
Click to expand...
Click to collapse
I solved it already.
need help
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\user>adb shell
[email protected]:/ # su
su
[email protected]:/ # stop
stop
[email protected]:/ # mount -o remount,rw /dev/block/mmcblk0p9
mount -o remount,rw /dev/block/mmcblk0p9
[email protected]:/ # /system rm
/system rm
sh: /system: cannot execute - Is a directory
126|[email protected]:/ # /system/app/*.odex
/system/app/*.odex
sh: /system/app/AccuWeatherDaemonService.odex: cannot execute - Permission denie
d
126|[email protected]:/ #
i'm stock in this one..can someone tell me how to resolve it?
Refer to the guide by superatmos...this guide has typos...but can't remember exactly...
Use dsixda kitchen
Sent from my GT-I9100G using Tapatalk 2
this metod can be used to deodex leaked JB XXLSJ rom !?
Can I also deodex leaked Jellybean XXLSJ stock ROMS?
Not sure but why take the trouble? Legendk95 already released a deodexed version of that ROM...
I keep getting
I keep getting this error message when running the .bat: Java was not found, you will not be able to sign apks or use apktool
Press any key to continue . . .
I have the newest JAVA and even Java dev tools on my laptop. What should I do?
Java is not set in your home path...
it is not tested on galaxy mini so I will say it beta, please its a request to post a reply whether it is working or not
bash:- an advanced command line than sh, it is colorful so you can differentiate the commands easily
steps for installing bash if you have cwm and want automated process
1:- download the bash command line flashable zip from here
2. download bash enabler script from here
3. flash the bash command line dhlalit11.zip in cwm recovery
4. boot the device normally
5. with the help of script manager execute the bash install.sh script with su privilege
and you are done
Click to expand...
Click to collapse
steps for installing bash if you don't have cwm or want to do it manually
1:- download the bash command line flashable zip from here
2. extract the files to a folder
3. go to /extracted folder/system
4. copy all the files to your system as they are placed
5. open terminal and type chmod 0755 /system/xbin/bash
and its done
Click to expand...
Click to collapse
note:- running bash will not give you root privilege automatically, you will need to type "su -c bash" to go directly into bash with root
reserved
if you don't mind...you can add this line into your updater script
Code:
set_perm(0, 0, 0755, "/system/blabla-the file position");
this one will automatically change the file permission for you so that we don't have to run the script anymore. you can also add symlink("/system/bin/bash", "/system/bin/sh"); to replace our old sh with bash so that everytime we use sh command, we will run bash instead. I was using these trick on my old ROM. however, this step will erase our sh binary file. so we must use it carefully. I usually did these step on a fresh rom installation. you might want to test it by yourself to make sure everything is alright.
I like to make scripts and one more reason is the script first looks for bash in /system/xbin to ensure a proper flash, if bash is not found it will tell the owner
didn't wanted to replace sh
if the purpose is to check whether it was installed correctly or not you can use run_program command instead and make the installation a lot simpler. you can put the script temporary in cache and delete it after the installation complete. or else...you can play with aroma installer. you can design the UI with several option like
1. install bash
2. symlink bash to sh
3. check the bash installation status
4. etc etc (as you like)
aroma could make our usual installation stuff into sumething more fun and interactive ^,^v
anyway, this is only a suggestion. if you want to use aroma you can modify my multi tweak installer. you said that you like to make scripts. it will be easy for you to get the basic stuff on aroma and starting to made one for your self. the link is in my sig. check the akuro or one pack tweak thread and got the aroma from the latest version there.
script run in cwm do not print anything on the UI and the user will not see whether the it was done or not
and I had previously used aroma in my rom patch for galaxy s series but this is just a simple task to do
I will think about it, but sure it will take time and I don't have time as I wanted to update the sticky of this forum then I am working on two mods for my karbonn smart tab 1
but I will for sure figure it out
installing bash
hi i have a Galaxy Centura tracphone and i get this error after executing su-c bash into the cmd via adb......I have installed the flashable zip and ran the installer script....
255|[email protected]:/system/bin # su -c bash
su -c bash
link_image[1936]: 7974 could not load needed library 'libncurses.so' for 'bash
(load_library[1091]: Library 'libncurses.so' not found)CANNOT LINK EXECUTABLE
255|[email protected]:/system/bin #
any ideas?
Bash
Hi, I managed to install the ZIP file (Moto G XT1032) and the script worked as well but after it was done, bash didn't have 755.
I tried adding it manually (as root) but it fails with this error:
Unable to chmod /system/xbin/bash: read-only filesystem
I tried remount using this:
su mount -o remount,rw /
But still no luck, any suggestions?
---------------------------------------------------- UPDATE -------------------------------------------------------
managed to get it via ADB Shell with this commands:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
chmod 755 /system/xbin/bash
still not working because of not having "libncurses.so" which will try to install manually.
ThePlayer10 said:
Hi, I managed to install the ZIP file (Moto G XT1032) and the script worked as well but after it was done, bash didn't have 755.
I tried adding it manually (as root) but it fails with this error:
Unable to chmod /system/xbin/bash: read-only filesystem
I tried remount using this:
su mount -o remount,rw /
But still no luck, any suggestions?
---------------------------------------------------- UPDATE -------------------------------------------------------
managed to get it via ADB Shell with this commands:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
chmod 755 /system/xbin/bash
still not working because of not having "libncurses.so" which will try to install manually.
Click to expand...
Click to collapse
You didn't needed to type whole dev block address, what you were missing was
(su
mount -o remount,re /system)
You were actually mountung the root of your device instead of system partition, which was the reason of non-working
Hi folks,
On my way trying to get 10 usefull posts to access the developers forums, I have writen this easy tutorial. xD
THIS IS FOR S5830i DEVICES. init.rc used belongs to S5830i ramdisk
Whats all about? Well, in this tutorial I will so you how to get root access directly from Kernel only modifing init.rc and adding su to tmp folder.
THIS IS NOT UNSECURING THE BOOT.IMG TUTORIAL
Question: Axyllum why are you posting this, if there are so many tutorials on how to do this for other devices?
Answer: Simple, as you all ready imagine, partition for boot.img is just 5MB Oh my god.
Then, if my boot image is all ready 4.28MB, how can I use a busybox thats 836KB (I compiled a busybox with mount, cp, mkdir, chmod and chown that is the minimum to get root: image = 836MB). Cant use this beacuse I exceed total mounting point size.
Kernel + ramdisk = 4.28MB if you pull stock boot.img from your device.
Minimum busybox explained before = 836KB
SU image 25KB to 86KB depending on the su image you use.
This makes a total of: 5.2MB. Try to flash it. It fails? Yes, you exceeded the mounting point size.
And the solution? Follow my tutorial.
Abilites you will need to follow the turotrial:
Know how to: Un pack & repack boot.img
Know how to: Decompress Ramdisk and compress it back. (to get the famous newramdisk in many many tutorials) newramdisk is just a name, you can compress back to any name, for example axyllumramdisk or yourramdisk or how ever you want to call it.
Asuming you know how to do the explained above and after my wierd chat, lets gooooo:
1. Open init.rc in your favourite text editor.
2. Go to this line in init.rc:
mount rfs /dev/stl9 /system check=no
You should see this:
mount rfs /dev/stl9 /system check=no
mount rfs /dev/stl9 /system ro remount
Got it? lets go to step 3.
3. Overwrite both lines with this:
mount rfs /dev/stl9 /system check=no
mkdir /system/xbin
copy /tmp/su /system/xbin/su
chown root root /system/xbin/su
chmod 06755 /system/xbin/su
mount rfs /dev/stl9 /system ro remount
Make sure you are not overwriting other lines or your ramdisk could not work.
4. Paste SU image file to tmp folder. Make sure SU image has execute permissions.
5. Compress back ramdisk (the famous newramdisk).
6. Repack boot.img
7. Flash it.
8. Restart device.
9. Download superuser.apk and busybox form market and.... there you go you made your kernel with root access and no need of a busybox.
Ok, this was simple, but i imagine more than one will like to know what we did.
I'll explain:
As we cant add a busybox, how the hell am i going to mount system rw, mkdir xbin, cp su from tmp to xbin, chmod / chown permissions?
I started reading the init.rc file (i was bored and my wife wanted to go shopping --> no way i have an init.rc file to mess up with), and I saw many mkdir, copy, chmod etc... commands. (Opened a beer)
So i thought, great, there is all ready a busybox with the least i need to make this. Then why dont i use this preinstalled commands?
And i did this:
mount rfs /dev/stl9 /system check=no --> first I checked this, this instruction is where init.rc mounts system. At this point system is mounted RW.
mkdir /system/xbin --> Then as system is rw, I will create xbin folder. how? with mkdir comand.
copy /tmp/su /system/xbin/su --> Great I did not find a cp command, but found a "copy" command someware in init.rc. Search for it, you will see its used. Then why dont I use it to copy SU in tmp folder to the just created xbin folder? It worked.
chown root root /system/xbin/su --> Owner of su in xbin is: yes, root.
chmod 06755 /system/xbin/su --> Set the right permission to su. You need to chmod with 06755. --> 09364, 66666, 83823 will not work looooolll just a joke i imagine you all ready know what setting permissions is all about.
mount rfs /dev/stl9 /system ro remount --> Remount system with ro (this is the read only remount command).
I dont know if there are any other tutorials doing this, this way, i just did it my self. I Found tutorials on doing the same, but busybox, and .sh script and su were needed. To much for our small boot.img partition.
Enjoy.
Tip, dont mess your init.rc if you do not understand it.