Related
Hello all! Yesterday I tried to get new rom on my HTC Incredible S. So I unlocked it on the htcdev.com and get a recovery... all works fine since I get new rom, when I installed it and reboot phone it stucks on HTC logo and nothing happens. I tried 3 different roms and the same thing happens... In original recovery it says S-On and maybe thats will be the cause of problem? So what I should do now? Please help me! Thans for answers and sorry for bad english
katobo45 said:
Hello all! Yesterday I tried to get new rom on my HTC Incredible S. So I unlocked it on the htcdev.com and get a recovery... all works fine since I get new rom, when I installed it and reboot phone it stucks on HTC logo and nothing happens. I tried 3 different roms and the same thing happens... In original recovery it says S-On and maybe thats will be the cause of problem? So what I should do now? Please help me! Thans for answers and sorry for bad english
Click to expand...
Click to collapse
dude you have to flash the roms boot.img seperatly. because you unlocked htc dev id assume you have adb drivers setup with fastboot.exe and all them files in a folder. for this im gunna pretend your files are in the c drive in a folder called android. before you start make sure you extract the boot.img from the roms zip file and put it in this android folder. open up command prompt and type the following.
cd c:\Android (Hit enter)
fastboot flash boot boot.img (hit enter)
wait for it to finish then reboot phone. rom should boot up fine
you must do this for every new rom until you s off
katobo45 said:
Hello all! Yesterday I tried to get new rom on my HTC Incredible S. So I unlocked it on the htcdev.com and get a recovery... all works fine since I get new rom, when I installed it and reboot phone it stucks on HTC logo and nothing happens. I tried 3 different roms and the same thing happens... In original recovery it says S-On and maybe thats will be the cause of problem? So what I should do now? Please help me! Thans for answers and sorry for bad english
Click to expand...
Click to collapse
I'm no expert so can't help you much, but the first thing I would ask is, 'did you flash the boot.img from within the ROM .zip after you installed the ROM'?
I'm HTCDev Unlocked, with S-ON still, and two ROMs I've used recently are ARHD 3.0.0/3.0.1 & Project X. I don't know which ROMs you are trying...
Not all will be compatible, I tried THIS ROM first but it didn't work (and I got what you are describing). See the help I received down this page HERE and on the previous page of that thread, but it proved to be a no-go.
EDIT: Said the same thing as above, got beaten to it while editing my post!
same problem was there for me
katobo45 said:
Hello all! Yesterday I tried to get new rom on my HTC Incredible S. So I unlocked it on the htcdev.com and get a recovery... all works fine since I get new rom, when I installed it and reboot phone it stucks on HTC logo and nothing happens. I tried 3 different roms and the same thing happens... In original recovery it says S-On and maybe thats will be the cause of problem? So what I should do now? Please help me! Thans for answers and sorry for bad english
Click to expand...
Click to collapse
u can see a file named boot.img inside the rom zip u downloaded.
open command prompt & navigate into the folder u saved fastboot files & type " fastboot flash boot boot.img "
then reboot phone custom rom will load.
I tried to do what you say, but it don`t works... I plug the phone in normal recovery and tried to use the : fastboot flash boot.img. When I hit enter i see message in cmd: unkown partition 'boot.img' error: cannot determine image filename for boot.img... what now?
katobo45 said:
I tried to do what you say, but it don`t works... I plug the phone in normal recovery and tried to use the : fastboot flash boot.img. When I hit enter i see message in cmd: unkown partition 'boot.img' error: cannot determine image filename for boot.img... what now?
Click to expand...
Click to collapse
You do not do this command from Recovery mode. You need to put the phone in FASTBOOT USB mode. So when you get to the HBOOT menu, choose FASTBOOT from the menu instead of RECOVERY. Then connect the phone to the USB port and type the following command:
fastboot devices
and your phone should respond with the device serial number. If it does, then you are good to go.
YEAH I DID IT!!! Sorry for it... Thanks for help and sorry for problems
i Tried to flash clean rom .. i wiped everything but when i rebooted i still had slimbean . . so i formated sd card from recovery which soft bricked my phone.
After numerous attempts with myth tool i finally got the stock firmware back and i noticed i couldnt turn on wifi nor did i have signal ..
I flash clean rom again but on reboot i still had stock rom.. finally i was able to flash silm bean again and i cant turn on wifi nor bluetooth and i dont have signal.. how can i fix this?
antmiu2 said:
i Tried to flash clean rom .. i wiped everything but when i rebooted i still had slimbean . . so i formated sd card from recovery which soft bricked my phone.
After numerous attempts with myth tool i finally got the stock firmware back and i noticed i couldnt turn on wifi nor did i have signal ..
I flash clean rom again but on reboot i still had stock rom.. finally i was able to flash silm bean again and i cant turn on wifi nor bluetooth and i dont have signal.. how can i fix this?
Click to expand...
Click to collapse
quit using MythTools and learn to fastboot manually....seems like every other problem today was from either PAC or MythTools. Once you learn how to do it manually, use Myth again. I'm not saying learn how to fix a motor to drive a car, but ya oughta know how to put some gas in the tank before ya pull out (that's what she said)
can sombody upload a back up image so i can restore from recovery?
or i would like to know if anybody has the radios so i can flash it ?
antmiu2 said:
i Tried to flash clean rom .. i wiped everything but when i rebooted i still had slimbean . . so i formated sd card from recovery which soft bricked my phone.
After numerous attempts with myth tool i finally got the stock firmware back and i noticed i couldnt turn on wifi nor did i have signal ..
I flash clean rom again but on reboot i still had stock rom.. finally i was able to flash silm bean again and i cant turn on wifi nor bluetooth and i dont have signal.. how can i fix this?
Click to expand...
Click to collapse
you formatted modem right? that is the problem, download this(radio) reboot your phone into fastboot (bootloader) and type the following command in command prompt. i strongly recommend you to use this fastboot binary
fastboot flash modem NON-HLOS.bin
fastboot reboot
Click to expand...
Click to collapse
now you can flash whatever rom you want, you will get those things working :good:
THIS MODEM FILE IS FROM MEXICAN STOCK ROM AND SHOULD WORK FOR ANY VARIENT OF ATRIX HD, IF YOU HAVE ANY ISSUES, PLEASE LET ME KNOW
Click to expand...
Click to collapse
Aingaran said:
you formatted modem right? that is the problem, download this(radio) reboot your phone into fastboot (bootloader) and type the following command in command prompt. i strongly recommend you to use this fastboot binary
now you can flash whatever rom you want, you will get those things working :good:
Click to expand...
Click to collapse
Yes I formatted SD card, system , modem .. Practically everything so i do think its the radio .. the fastboot cmd you gave me closes instantly as well as the older ones i had.. why is it doing that? please help me fix this and i will donate to you
antmiu2 said:
Yes I formatted SD card, system , modem .. Practically everything so i do think its the radio .. the fastboot cmd you gave me closes instantly as well as the older ones i had.. why is it doing that? please help me fix this and i will donate to you
Click to expand...
Click to collapse
can you be precise what happens ? what fastboot files you used? and what os you use. also is your driver working right?
Aingaran said:
can you be precise what happens ? what fastboot files you used? and what os you use. also is your driver working right?
Click to expand...
Click to collapse
i doble click.. cmd comes up but closes in 1 second i used the file you linked ..im on win7 64 bit .. how can i know if my driver is working right?
antmiu2 said:
i doble click.. cmd comes up but closes in 1 second i used the file you linked ..im on win7 64 bit .. how can i know if my driver is working right?
Click to expand...
Click to collapse
Problem is with your computer... Do you have a chance to use some other computer with working cmd?
He's double clicking the fastboot file. You navigate a command prompt to it then use the commands.
Sent from my MB886 using xda premium
darknessrise1234 said:
He's double clicking the fastboot file. You navigate a command prompt to it then use the commands.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
Thanks mate I oversighted it wrong... I'll guide him
Sent from my MB886 using xda app-developers app
---------- Post added at 10:17 PM ---------- Previous post was at 10:14 PM ----------
antmiu2 said:
i doble click.. cmd comes up but closes in 1 second i used the file you linked ..im on win7 64 bit .. how can i know if my driver is working right?
Click to expand...
Click to collapse
You should not double click the fast boot file. Open that snapdragon fast boot folder , hold shift key and right click the mouse, in that list you will find open commmand window here. Click that.... A command window will open up.. In that command window type the commands I gave you
Sent from my MB886 using xda app-developers app
OMG it worked!! it worked!! thanks Aingaran email for donation!
I've had clean ROM stick on the moto symbol for at least 5 min , also make ensure to wipe cache and devlik after you flash.
Sent from my MB886 using xda app-developers app
Aingaran said:
you formatted modem right? that is the problem, download this(radio) reboot your phone into fastboot (bootloader) and type the following command in command prompt. i strongly recommend you to use this fastboot binary
now you can flash whatever rom you want, you will get those things working :good:
Click to expand...
Click to collapse
Unfortunately I made the same mistake but the file you gave works only for signals and bluetooth I still can't turn on wifi I'm on carbon nightly 7oct rom & arrrgh kernel and I have a AT&T brand phone. please provide the working file ... I will be thankful to you....
Use this post as reference and thank the guy if it help you since he battle with tje wifi issue and never give up until find a solution or fix
http://forum.xda-developers.com/showthread.php?p=46271659
Sent from my Atrix HD using Pacman rom and XDA 4 Premium
This Thread Is Meant For Unbricking Gionee M2 Device.
Gionee M2 is an awesome device with mediatek 6582 super fast quad core processor loaded with Mali-400 Gpu.Unfortunately I had hardbricked this device thanks to avi3230 for helping me out.Gionee m2 is also rebranded as walton primo hm.
Note:-This is my first thread please tell me if there any mistakes or u won't understand any part of it.All the links have been uploaded by me so if u get any download error let me know.
Important: Download and install gionee phone drivers from here or the process will fail and please read all the points.
Methods:-Using Sp Flash Tools Use tool provided in link don't use old version
NOTE:-For sd ram fail error 4032 u need windows xp to unbrick since installing drivers in windows 7 is big mess which u have to do manually so install xp then do this
Update: camera fix download fromDownload video tutorial from [URL="https://www.sendspace.com/file/n2vvi0"]here
Update:- Since many of u people know gionee had launched kitkat update which is done through flash tools and I knew many of u would have bricked your phone so don't worry just follow the steps and use the kitkat firmware downloaded from gionee site if u want jelly bean then download the flash files provided in post and follow the steps use windows xp.
For SoftBricked Gionee M2 device(Devices that are powering up but only in boot loop or other problems follow this).
Instructions:-
1.Download and extract sp flash tools from here
2.Download the Custom recovery image file that will be flashed on your device from here
3.Extract sp flash tools and open flash tools.
4.Click on scatter loading select MT6582_Android_scatter.txt from new recovery working folder.
5.Check if PRELOADER is highlighted as red or not then continue if its normal then u are good to go.
6.If you have good battery life then keep following these steps or see meta-mode below.
7.Click on download button then attach your usb to phone with your battery inserted the port will be detected and downloading will start.
8.First it will be red then final color will be yellow which means its downloading then it will show download complete.
9.Reboot into recovery it will be CTR recovery do a factory reset then reboot the phone.Voila!!Phone is unbricked:good:
10.If any problems install stock rom through ctr select install zip from sd card
Note:-For going back swipe left.
10.Download and install stock rom from here
12.You can copy this rom to your device using mount usb from mount and storage option.
13.After rom is installed do a factory reset from ctr.
META-MODE Guide:-
Instructions:-
1) Switch OFF Phone..
2) Remove Battery..
3) Click on Download or Format all + download according to what you're following.
4) Connect mobile to PC while holding Volume + button [WITHOUT BATTERY]..
5) Hold the button till flashing completes...
6) After 100% Flash,Release Button..
7)Follow from step 9 Above or for hard brick phone follow step 10 from below.
For HardBricked Gionee M2 device(Devices that don't even powerup).
Instructions:-
1.Download and extract sp flash tools from here
2.Download the flash files from here links:
Part-1:-https://ad f.ly/1C8fM0 (ignoreadded in between)
Part-2:-https://ad f.ly/1C8gmb
3.Extract the files then open flash tools.
4.Click Scatter loading and select scatter file MT6582_Android_scatter.txt from M2 stock files folder.
5.If you had previously flashed wrong rom and hardbricked your device then select format all+download otherwise select download only.
6.Check if PRELOADER is highlighted as red or not then continue if its normal then u are good to go.
7.If you have good battery life then keep following these steps or see meta-mode above.
8.Click on download button then attach your usb to phone with your battery inserted the port will be detected and downloading will start.
9.First it will be red then final color will be yellow which means its downloading then it will show download complete.
10.Now check if your phone is rebooting it will reboot :good: if not rebooting it means it has no battery life just put it on charging while charging it will go in boot loop don't worry its charging ignore it leave it for 30 minutes atleast.
11.Now switch off again then flash custom recovery by following softbricked gionee m2 device instructions.
After flashing files on HardBricked devices.
Your problems are not still finished now after your phone has started u will see invalid imei error .Don't worry u can solve it easily.But if you are not getting this error then don't follow this
Instructions:-
1.First remove battery and copy both M_IMEI And S_IMEI numbers and write it on notepad or anywhere.
2.Download and install mobile uncle tools apk from here
3.Open it and go to engineer mode then for Engineer mode[mtk]
4.Go to connectivity then CDS information.
5.Go to Radio information then phone 1.
6.You will see AT+ and at bottom send command click on AT+ and retype AT+ automatically u will see AT+EGMR=1,7"" and other options.
7.select AT+EGMR=1,7"" and type M_IMEI number in inverted comma's.like this AT+EGMR=1,7"Your Imei number"
8.Click on send command if it shows command is msent then good for u.
9.go back select phone follow step 6 and select 1,10"".
10.Type S_IMEI like u did before in comma's then send command.
11.If command is msent reboot your phone.
12.Then
And sorry now l don't reply on whatsapp so leave a comment I'll be sure to replyIF I HELPED YOU DON'T SAY JUST PRESS THE THANKS BUTTON:good::good::good::good:
No matter what i do, i keep getting S_FT DRAM FAIL ERORR 4032
I previously flashed my phone with the gionee me unofficial 4.2.2, it completed but wont power on and it not flashing any other rom i try
Gionee m2
rhyme4u12 said:
No matter what i do, i keep getting S_FT DRAM FAIL ERORR 4032
I previously flashed my phone with the gionee me unofficial 4.2.2, it completed but wont power on and it not flashing any other rom i try
Click to expand...
Click to collapse
Send me the screenshot use the latest version of flash tools i have uploaded in my post and also download the flash files u don't have to panic u have flashed gionee m2 rom i had flashed gionee g150 some ****ty rom with same specs just follow the steps it will be ok.Contact me if any probs if u stay in mumbai,maharashtra then u could come at my place i will flash for u.
Regards,
Saif Shaikh
My GIONEE M2 is with 1GB ram and 8GBrom, it a version for nigerians, Please can you help me get the stock files. I think it different from yours that's why its not flashing...
My DEVICE:
GIONEE M2
QUAD CORE
1GB RAM
8GB ROM
Please help me beacuse i learnt your own version is 4GB rom
It finally worked for me yesterday using Windows XP,
rhyme4u12 said:
It finally worked for me yesterday using Windows XP,
Click to expand...
Click to collapse
Pls guy I. Hv tried all I cn to hardbrick my own but no result... Pls hw do use window xp to flash urs bcz mine now is not on at all.if I press d power button only the flash light at the back will just blick... Pls I need help.... Here is my number pls call me and I'll call u back 08060389002
gionee m2
onajite said:
Pls guy I. Hv tried all I cn to hardbrick my own but no result... Pls hw do use window xp to flash urs bcz mine now is not on at all.if I press d power button only the flash light at the back will just blick... Pls I need help.... Here is my number pls call me and I'll call u back 08060389002
Click to expand...
Click to collapse
No WhatsApp now
Thanxx rebirth for my m2
Thanxx Saif for helping.It worked.Finally I unbricked my M2
mr
Thanks very much finally I unbreak my daed gionee M2,may God bless U sir @bachir[email protected]
+2348036706644.add mi on whatsapp for live testimony.u r great my Master
Cannot download the the last flash file !
I cannot download the last file from those four file links ..... Can someone please suggest me an alternate link to that 1.83 MB file
Thank You
Il
Volzio said:
I cannot download the last file from those four file links ..... Can someone please suggest me an alternate link to that 1.83 MB file
Thank You
Click to expand...
Click to collapse
Hey bro thanks for commenting the prob I will reupload the file
Gg_hacker said:
Hey bro thanks for commenting the prob I will reupload the file
Click to expand...
Click to collapse
Worked like a charm ..
Thanx
Gg_hacker said:
Call me on my number or whatsapp me +919619006588
Click to expand...
Click to collapse
Dear gurus; URGENT
I update to kitkat 4.4.2 on gionee m2 in Nigeria but my rear (back) camera disappear and stops working afterwards. I had invalid IMEI issue too but I have resolve this. Please how can I resolve the CAMERA issue?
Thanks in anticipation
Unbrick fail
I tried updating my Gionee M2 to the official KitKat ROM from their site, after following every step (I used a window XP SP3), after the initial red coloured bar, I got this message " S_FT DRAM FAIL ERORR 4032 ", now my phone can't boot up, I followed your ubricking step to go back to JB Stock ROM but still getting same message " S_FT DRAM FAIL ERORR 4032 ". I have tried all I could but same message keeps popping up, please is there something I am missing or doing wrong, please help.
cygnis said:
I tried updating my Gionee M2 to the official KitKat ROM from their site, after following every step (I used a window XP SP3), after the initial red coloured bar, I got this message " S_FT DRAM FAIL ERORR 4032 ", now my phone can't boot up, I followed your ubricking step to go back to JB Stock ROM but still getting same message " S_FT DRAM FAIL ERORR 4032 ". I have tried all I could but same message keeps popping up, please is there something I am missing or doing wrong, please help.
Click to expand...
Click to collapse
Am having this same issue hrere. someone help us out pleeeeeeeeeeeaaaaasssee
Dear cygnis and obiomon reinstall the drivers and use another USB port follow this also first just use format all +download all then after format 100% it will show error then again senesce "download only" and flash it should flash properly and use meta mode steps mentioned in this post.
help
Great work.. kudos.
But am getting PMT CHANGED FOR ROM IT MUST BE DOWNLOADED error ... what do i do please?
rhyme4u12 said:
It finally worked for me yesterday using Windows XP,
Click to expand...
Click to collapse
Hello.
Please did u follow the same process or u did something else cause i keep getting "PMT ROM changed EERROR it must ne downloaded"
Please help my number is +2348029615972 whatsapp me or send ur number.
For those who are still having problems using SP flash tool, see the video below
gionee update.zip file not installed
i downloaded the update for gionee m2 8 gb from settings and it did'nt intall correctly and my phone is in bootloop showing system recovery menu sometimes i have tried factory data rest and everything from there but still no help ............please help
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Don't worry have you backup you data?
if you have, just install the driver for qhusb
then your phone should be able to recognises by MIflash then flash any fastboot rom, You phone should be good to go.
I had a similar issue but i tried to hold the power button for like 30 seconds and the phone booted. If it didn't work, you should follow this thread: en.miui.com/forum.php?mod=viewthread&tid=73348&highlight=Mi3%2Bunbrick&mobile=no
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
murattiy said:
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
Click to expand...
Click to collapse
Did you personally tried that? Because flash all bat do uses fastboot to flash, which can't be accessed.
I wonder whether the other one u poster doesn't use fastboot, cant check the file content atm
I have tried many times
last times tried 3 hours ago, for alpha 5.12.24
my video under explain
http://m.youtube.com/watch?v=fSl9xrR_J4g
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
you need to do İnstall spacial flash_all.batt change to in flash_all.batt "cancro_global_images_V7.0.5.0.KXDMICI_20151016.0000.3_4.4_global"
dont use miFlash .. enough u clik speical flash_all.batt
If your device not boot into fastboot/recovery mode press power button for around 30-40 seconds .
and still not boot into fastboot/recovery mode
battery cable exist than try.. i tried many times))
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Prince Chandela said:
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
coolkillermax said:
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
Click to expand...
Click to collapse
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
回复: Bricked Mi3 - Showing QHUSUB Bulk in PC
Prince Chandela said:
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
Click to expand...
Click to collapse
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
coolkillermax said:
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
Click to expand...
Click to collapse
flash miui fastboot rom then
Prince Chandela said:
flash miui fastboot rom then
Click to expand...
Click to collapse
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
coolkillermax said:
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
Click to expand...
Click to collapse
can you boot in recovery now?
Prince Chandela said:
can you boot in recovery now?
Click to expand...
Click to collapse
No...
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583
Me_Ashish_ said:
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
Click to expand...
Click to collapse
Really need your help..
Can you explain it further?
please..
Hi friends today I am going to tell you how to root k4 note which have Android 6.0 (M.M).
Many members have already given this process but in some place the needed files are missing and some other place the process is not explained clearly. So to slove this I have made all in one file and given the process as simple as possible by me.
This process have worked very fine for me. Rooted 8 k4 notes without any problem.
Read all and follow. And do it on your own risk. I am not responsible if anything go wrong.
First of all I would like to introduce myself ( I know it's not necessary but to some of them to believe my work )
Myself is Kaushik. I have been using XDA since 2 years but never opened an account and replied in posts. Now after learning a lot I thought I should also start replying. May be I am a junior member here but not truly a junior member.
I have flashed more then 250 mobile of all brands. And thanks to XDA my success rate is 99.7 %
Thanks to XDA to making me local gadget guru. Now here every one believe that if even service center also fail to slove some software problems but at last kaushik will surly pass.
OK now let's see how to root.
(This will void your warranty)
(Phone will factory reset, which means all of the apps and data will be gone, not the internal sd)
(To root Lenovo K4 note you need to first unlock the bootloader. See below to know how to do it )
1. First download the two files from the links I have given.
All files needed to install twrp and root are in one zip file. Link is below.
https://mega.nz/#!D8MAwSzK!BYSzl4FGE_dbLy5wwzS0lbwSSNbelB7eMmfwdQjDoos
Usb ADB drivers for k4 note. Link below.
https://mega.nz/#!281yHDoI!iuIynHRqf8ui7IffStBhwrJvHJ4NBn1eExy_MYpr13o
Now to unlock bootloader.
2. Now in your mobile go to 'Settings' / 'About Device' / press 7 times on built number to unlock Developer options.
3. Now go to Developer options and click on 'OEM Unlocking' and press enable.
4. Next enable the USB debugging.
Your bootloader is now unlocked.
Now in PC extract the downloaded files
5. Install lenovo adb drivers ( it is in the link I have provided ) on your pc
6. Go to adb folder and press and hold shiftkey and right click with mouse. Select open command from here.
7. type adb reboot bootloader You need to authorize the pc if not done already. (The phone will boot onto fastboot, you can see small fastboot written on the left corner of the screen once the phone boots)
8. Now open adb folder and open 'unlock_bootloder'. A message will be displayed in mobile to press volume up key to continue. Press volume up key. A message in pc cmd will display as press any key to continue. Now press any key.
9. Now in cmd type fastboot flash recovery recovery.img
A message will be displayed as done.
Next part is very important
10. After its done press volume up and down button together with power button. Once you see the lenovo white screen, release the power button, release the volume keys once the screen goes black, wait for few minutes till you boot into the new custom recovery.
To avoid black screen set brightness below 30 in twrp settings. ( Not so important if don't understand how to do it )
11. Now the recovery allow modifications by just swiping and the goto mount and tick system and go back
12. Now go to advance, then file manager, then system, and delete the file named, recovery from boot.p ( if you are facing problem plz see point 14. )
13. After done do back and flash supersu.zip. (it is in the link which I have provided)
Now you phone is rooted and the supersu app will appear in the app drawer.
14. If you are facing problem with file manager flash aroma file manager ( it is in the link ). It will open in twrp. Now go to system and delete recovery from boot.p.
If you do not delete the said file again stock recovery will be replaced. If it happens so again you must repeat the steps from step 1.
Next to install xposed after boot up install xposed.apk (app is in the link)
Next flash xposed zip file. (Zip in the link )
Please don't forget to hit thanks if it helped you.
It will make me post more and help others.
Thanks
Regards
Kaushik.
Is this process safe??
HELP ! Fastboot doesn't recognize my device
s230 update brought a lot of issues thus I downgraded to s218 & now on s219. I am able to get adb to recognize my device but not fastboot. Therefore I am unable to unlock bootloader!
When I type in " adb reboot bootloader" or click on the "unlock_recovery.bat" file provided, I get booted into a dark screen where "fastboot" is written at the bottom left & the command prompt window says < waiting for device> & I am stuck there until I reboot my phone.
Paras1259 said:
Is this process safe??
Click to expand...
Click to collapse
Yes it's 100℅ safe bro. But how ever if you do any mistake I will not be responsible.
sujitmohanty2012 said:
s230 update brought a lot of issues thus I downgraded to s218 & now on s219. I am able to get adb to recognize my device but not fastboot. Therefore I am unable to unlock bootloader!
When I type in " adb reboot bootloader" or click on the "unlock_recovery.bat" file provided, I get booted into a dark screen where "fastboot" is written at the bottom left & the command prompt window says < waiting for device> & I am stuck there until I reboot my phone.
Click to expand...
Click to collapse
I Too have faced same problem. But I have installed all the drivers and it started working back to normal. So install the drivers which I have given in the link. Plz hit thanks if helpful. And plz make sure you have unlocked bootloader in developer options
Ongoli Koushik said:
I Too have faced same problem. But I have installed all the drivers and it started working back to normal. So install the drivers which I have given in the link. Plz hit thanks if helpful. And plz make sure you have unlocked bootloader in developer options
Click to expand...
Click to collapse
Thank you for the followup! I am surely gonna give this another go
What is the version of TWRP...
Sent from my Vibe K4 Note using XDA Labs
the internal memory is almost full after flashing twrp by this method.. any solution
the internal memory is almost full after flashing twrp by this method.. any solution plzz..
I am going to flash a new rom (6.0.1 ROM) ... So do I just flash Xposed??
anaynymous said:
I am going to flash a new rom (6.0.1 ROM) ... So do I just flash Xposed??
Click to expand...
Click to collapse
i have a7010a48 and after flash to S219_160810_row missing imei and Version of the radio module.How to fix it.
sujitmohanty2012 said:
s230 update brought a lot of issues thus I downgraded to s218 & now on s219. I am able to get adb to recognize my device but not fastboot. Therefore I am unable to unlock bootloader!
When I type in " adb reboot bootloader" or click on the "unlock_recovery.bat" file provided, I get booted into a dark screen where "fastboot" is written at the bottom left & the command prompt window says < waiting for device> & I am stuck there until I reboot my phone.
Click to expand...
Click to collapse
Bro you have to reset your lenovo vibe k4 note using spflash tool
bro, how to enter recovery mode for second time? i try press volume up+down+power, after white screen i release power button, after black screen i release all button, but nothing happend.. your tutorial fully working, i can install supersu.. plz help me..
salaminder said:
bro, how to enter recovery mode for second time? i try press volume up+down+power, after white screen i release power button, after black screen i release all button, but nothing happend.. your tutorial fully working, i can install supersu.. plz help me..
Click to expand...
Click to collapse
Check this . you will be able to know
https://www.youtube.com/watch?v=uF_F0G2eEhg
---------- Post added at 01:09 PM ---------- Previous post was at 01:09 PM ----------
udeshdhiman said:
Bro you have to reset your lenovo vibe k4 note using spflash tool
Click to expand...
Click to collapse
Why do I reset?
Is this ROM works for all ROW numbers?
Hi Koushik,
I have some questions,
Is this ROM works for all ROW numbers? present my device having s232 ROW.
Is this process will erase internal memory, coz i want to root my device to recover some files from internal memory.
Can you give me replay on this
Thanks.
My Phone Volume Down broken
Hi Bro.
My volume down button was broken, any alternate method
ask
does it work in android 5.0 s152?
stock recovery
please i need stock recovery lenovo a7010a48 s232
can i delete TWRP
alsa7er said:
please i need stock recovery lenovo a7010a48 s232[/QUOTE
Flash whole rom via sp flash tool
Click to expand...
Click to collapse
naandha114 said:
alsa7er said:
please i need stock recovery lenovo a7010a48 s232[/QUOTE
Flash whole rom via sp flash tool
Click to expand...
Click to collapse
ok thank you:good:
Click to expand...
Click to collapse