Related
hi everyone ,
problem getting into recovery mode . i'm tryng to install cm 10.1 from ics
first i have lg p970 running ics , rooted , clockworkmod recovery installed .
after pressing volume down + power button together or pressing g key nothing gets me into recovery mode .
ps. i tried rebooting from rom manger " reboot into recovery " i got my phone frozen with " security error "
i used smart flash tool to get it repaired again .
any help plz !!!!
[email protected] said:
hi everyone ,
problem getting into recovery mode . i'm tryng to install cm 10.1 from ics
first i have lg p970 running ics , rooted , clockworkmod recovery installed .
after pressing volume down + power button together or pressing g key nothing gets me into recovery mode .
ps. i tried rebooting from rom manger " reboot into recovery " i got my phone frozen with " security error "
i used smart flash tool to get it repaired again .
any help plz !!!!
Click to expand...
Click to collapse
you can't have CWM on official v30.There is some workaround , but there is an easy way.Flash v20 patched with CWM and then install CM10.1 or other custom rom
Yes this might fix my troubles too, i kept going back to stock v10 then i used the lg updater for both updates till i was at v30 and then installed cwm. All the times i kept getting that stupid security error..
how stupid :') i also didnt read anywhere about it?? thanks for the reply tho.
I got the job done using a flashed v20 to get into CWM and flashed other rom from there.. Thanks
thank you guys for the help . appreciated
i will go the v20 a try . i hope it works for me
can't boot into sw update mode
Hi.
I installed CWM on my LG with official v30C rom.
When i tried to do a backup I got a black screen with LG logo that says security error.
Now I my phone does't boot.
When I press power button i get the same black screen and the phone turns off after a few seconds.
Any advices how to unbrick my phone?
Thanks.
pedromarques said:
Hi.
I installed CWM on my LG with official v30C rom.
When i tried to do a backup I got a black screen with LG logo that says security error.
Now I my phone does't boot.
When I press power button i get the same black screen and the phone turns off after a few seconds.
Any advices how to unbrick my phone?
Thanks.
Click to expand...
Click to collapse
use smart flash tool and flash v20 with Cwm then do any thing u want the black screen happend becouz our Ics still bootloader locked but not 100% there is a way to unlock it but dangerous if ur ob bricked willnot back to live again...!!
Sent from my LG-P970 using xda app-developers app
mohammed tohfa said:
use smart flash tool and flash v20 with Cwm then do any thing u want the black screen happend becouz our Ics still bootloader locked but not 100% there is a way to unlock it but dangerous if ur ob bricked willnot back to live again...!!
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
I cannot boot into sw update mode - i removed the batery and connected the usb cable, pressed power+ vol down and nothing happens.
With the battery on, even if I press power + vol down it doesn't enter sw update mode - i get the error message and it then turns off.
SmartFlash doesn't detect the device so I cannot flash another ROM.
Im NOOB at this, so maybe I'm missing something.
pedromarques said:
I cannot boot into sw update mode - i removed the batery and connected the usb cable, pressed power+ vol down and nothing happens.
With the battery on, even if I press power + vol down it doesn't enter sw update mode - i get the error message and it then turns off.
SmartFlash doesn't detect the device so I cannot flash another ROM.
Im NOOB at this, so maybe I'm missing something.
Click to expand...
Click to collapse
Just hold VOLUME UP! then plug in the usb cable, DO NOT hold the power button!
Sent from my battery eating android monster!
N00BY0815 said:
Just hold VOLUME UP! then plug in the usb cable, DO NOT hold the power button!
Sent from my battery eating android monster!
Click to expand...
Click to collapse
SOLVED!!!!
(why the hell was I holding the power button???)
Many thanks!!!
After searching around I couldn't find anything related so here's my problem.
After succesfully unlocking the bootloader of my Xperia Z it continues to work fine.
It prompted the initial startup screen (enter language, account info ect.)
I turned my device off and on... this is where the problem starts..
This is what i get
Sony brand logo>
Xperia brand logo>
5 repeated cloud animation of xperia logo and at the last one it stalls, Phone reboot and back to 0.
This goes on repeatedly until a hard poweroff or complete discharge ( I suppose)
So I know im kinda screwed, is relocking the bootloader any option? Contacting Sony atm for some sort of software replacement/flash anything..
Cheers, Geert
Try the safe mode,keep pressing vol down with power until the phone boot completely.
If the phone boot to safe mode than do a factory reset.
Sent from my C6602 using xda premium
GeertNool said:
After searching around I couldn't find anything related so here's my problem.
After succesfully unlocking the bootloader of my Xperia Z it continues to work fine.
It prompted the initial startup screen (enter language, account info ect.)
I turned my device off and on... this is where the problem starts..
This is what i get
Sony brand logo>
Xperia brand logo>
5 repeated cloud animation of xperia logo and at the last one it stalls, Phone reboot and back to 0.
This goes on repeatedly until a hard poweroff or complete discharge ( I suppose)
So I know im kinda screwed, is relocking the bootloader any option? Contacting Sony atm for some sort of software replacement/flash anything..
Cheers, Geert
Click to expand...
Click to collapse
Welcome to XDA
you should go to the recovery thread in my signature. Read the first 2 posts.
Hope you recover your phone.
Hi everyone !
I have the same problem as GeertNool. My Xperia is stuck in the same loop. I have tried everything.
- Flashboot : stuck at 0% when i try to flash
- Pc Companion and SEUS = dead ends
- Safe mode : cant make it work
I read the recovery thread. It seems that the Kernel is malfunctioning but i dont understand what should be my next move. Am i supposed to let the phone reboot endlessly untill eventually the battery dies ?
Thanks a lot for your precious answers.
Alex
al3xwhite said:
Hi everyone !
I have the same problem as GeertNool. My Xperia is stuck in the same loop. I have tried everything.
- Flashboot : stuck at 0% when i try to flash
- Pc Companion and SEUS = dead ends
- Safe mode : cant make it work
I read the recovery thread. It seems that the Kernel is malfunctioning but i dont understand what should be my next move. Am i supposed to let the phone reboot endlessly untill eventually the battery dies ?
Thanks a lot for your precious answers.
Alex
Click to expand...
Click to collapse
Yes.
When the battery dies the phone should reset itself.
After the loops end plug into a charger, not pc for now.
You should get a red led indicating low battery level charging is working.
After the red led you may get Sony boot screen or bootloops.
If you get Sony and then the charging battery icon, then charge to over 50%. Then use pc companion or flashtool to restore.
If you get bootloops then read my 2nd post from the recovery thread in my signature for bootloop tricks.
Please let me know if it works. I am looking to add the Xperia Z to my recovery guide.
If there are any questions about my guide please ask in that thread.
Thanks
From Jaramie's LT28at
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
after flashing rom my xperia is booting until the lock screen appears then it resets. what should i do? thanks
vaud27 said:
after flashing rom my xperia is booting until the lock screen appears then it resets. what should i do? thanks
Click to expand...
Click to collapse
Did you flash it with flashtool?
Did you enabled "Wipe: Data, Cache, Appslog.?
Sent from my C6602 using xda premium
gm007 said:
Did you flash it with flashtool?
Did you enabled "Wipe: Data, Cache, Appslog.?
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
i use cwm to flash it. i wipe everything. after flashing the recovery disappear and my xperia keeps on rebooting after reaching the lock screen.
can i reflash it using flashtool even my usb debugging is off?
vaud27 said:
i use cwm to flash it. i wipe everything. after flashing the recovery disappear and my xperia keeps on rebooting after reaching the lock screen.
can i reflash it using flashtool even my usb debugging is off?
Click to expand...
Click to collapse
Something wrong with the rom you are trying to install.
Yes you can use flashtool even if usb debugging is off.
Check schaggo post up^^^^
Sent from my C6602 using xda premium
gm007 said:
Something wrong with the rom you are trying to install.
Yes you can use flashtool even if usb debugging is off.
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
i will try to flash it using flashtool. thanks for your help mate
had the same problem and i managed to fix it just showing sony sign by installing the sony update programme on the sony update website
all you do is put phone into flashboot mode.
on mine i had to hold up and power button untill it vibrates 3 times then press down volume button to get it into flashboot mode
takes a few atempts but it worked.
takes around 20 mins to download then install another 10.
i couldnt get flashtool to flash firmware as my phone is locked on 3 mobile firmware locked bootloader
i hope this helps you
update:
schaggo method works. i can breath now. thanks to @gm007
This worked great for unbricking mine !!
P.S. don't waste time for Sony's Emma flash, they do not send login credentials in real time, site says they do manual user validation ...
schaggo said:
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
Click to expand...
Click to collapse
AW: [Q] Xperia Z possible brick
racht said:
...don't waste time for Sony's Emma flash, they do not send login credentials in real time...
Click to expand...
Click to collapse
They never will. Read the instructions which come with EMMA. I have it working fine, officially, without any credentials.
flashtool not flash the phone
schaggo said:
Try this: hold power and VolUp for about 15 seconds. The device should vibrate 3 times in a row. It should now be off. Don't plug it in anywhere.
Download the correct flashtool beta for xperia z http://forum.xda-developers.com/showthread.php?t=2162907
Download a known-to-work firmware ftf
Put it into C:\Flashtool\Firmwares
Open flashtool (flashtool64 if you run 64bit Windows)
Chose Flash (flash arrow button)
Chose the ftf you downloaded
Enable "Wipe: Data, Cache, Appslog"
Click flash
A new window opens with a "press back button" animation
Now plug in the device while ONLY holding VolDown. Only VolDown, no Power. The LED should turn green.
Don't interrupt the flashing process. It will take a while.
Report back if it worked.
Click to expand...
Click to collapse
I have the same issue here, the phone suddenly dead. Charge it using AC adaptor and wall socket and the red led flashs for about 2 hours, the orange LED never turns on. Try your advice and got this:
1) Vol up + Power not work (no vibration, nothing)
2) Flash with flashtool 0.9.10.2 beta6 with no lucky, indicated "device disconnected" after animation gone.
3) regress to flashtool 0.9.10.1, device connected and then stuck at "flashing data.....", the progress bar stay at 0% and then nothing.
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
[email protected] said:
I have the same issue here, the phone suddenly dead. Charge it using AC adaptor and wall socket and the red led flashs for about 2 hours, the orange LED never turns on. Try your advice and got this:
1) Vol up + Power not work (no vibration, nothing)
2) Flash with flashtool 0.9.10.2 beta6 with no lucky, indicated "device disconnected" after animation gone.
3) regress to flashtool 0.9.10.1, device connected and then stuck at "flashing data.....", the progress bar stay at 0% and then nothing.
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
Click to expand...
Click to collapse
Try sony update service or remove flashtool and install again and use another firmware(maybe the first one is corrupted).
Sent from my C6603 using xda premium
[email protected] said:
P.S. bootloader is still locked but phone is ROOTED so I'm affraid it's out of warranty. Just got the phone as a birthday gift from my wife yesterday! She'd kill me if she knows that.
Update:
1) Power + Vol Up works now. The sequence does matter, I found I have to press the Power button first and then Vol Up, it dosen't work vise versa.
2) flashing still doesn't work for me. And I noticed that the LED turn green and then turn off immediately. I'm not sure if that is the cause. I'm sure when in fastboot mode (connect to USB port when pressing Vol Up), the LED turn blue and stay blue. Is my flash mode corrupted?? That's really bad!
Click to expand...
Click to collapse
It probably means your battery was low.
From my Xperia LT28at ION
gm007 said:
Try sony update service or remove flashtool and install again and use another firmware(maybe the first one is corrupted).
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Thanks for response. Finally flashtool 0.9.10.1b works for me!
Returning to stock
Hey guys,
I've flashed [ROM][JB 4.2.2][CM10.1][AOKP-MR1][PananoidAndroid 3.15] PAC v22.1.1 - Update: 0508 from http://forum.xda-developers.com/showthread.php?t=2208249&page=65. It's working, but I'd like to try another ROM, specifically Xperia Z Revolution™ from http://forum.xda-developers.com/showthread.php?t=2175903. This requires to install stock 10.1.A.1.434 firstly So I downloaded C6603_10.1.A.1.434_Generic DE, NL, world. Flashing with Flashtools 0.9.10.1 always stucks at 0%.
BL unlocked. Does anyone have any idea how to get stock 434 in the phone? Originally there were older one 10.1.A.1.340, if it's somehow important to know...
nice to meet you guys,
i am new here.
it starts with,
when i want to flash new rom it works perfectly fine.
but after finishing installation of rom it asks for reboot...
after rebooting there is no coming back to nothing in screen
i have serious problem with my Xperia SP
hard brick problem
no vibrate
no light
no chargin sign
flashtool
pc companion
volum up-down with usb cable...an
with power button
nothing working...
please , help
Before My SP has-
DoomKernel V3
CWM - 6.0.3.7
TWRP- 2.0.x.x
ROM-
Existenz v 1.3.7
(camera problem that's why i was tryin to install another rom called Mahdi-v2.0)
Now charging till 3hours.....
but there is absolutly no response from my Phone........
please, somebody help me about my phone......
also i am tryin and serching in xda for something usefull and responsed with my phone.....
thank you very much,
and.
sorry for taking your valuable time
SEUS
Have you tried SEUS for repairing your software? Always works for me
won't help with SUS
Nanostray said:
Have you tried SEUS for repairing your software? Always works for me
Click to expand...
Click to collapse
tried everything include Sony Update Service (SUS)
but.... my problem is
phone get nothin (Vibrate, Light)
if i pressed Volume down with power
or volume down with USB through Flashtool
is there anything could i try??
thanks for helpin, mate!!
Do you unlock your bootloader first?
Sent from My XSP
Solution..
Happened with me when i shifted from normal rom to cm based rom
i just changed kernal by hitting fastboot mode and saved my day...
i have tried the kernal (boot.img) which was inside the 4.4 cm 11
hope u get it!!
Pulsa said:
Do you unlock your bootloader first?
Sent from My XSP
Click to expand...
Click to collapse
thank you for replying...
before bricked my phone i was using a Custom ROM (eXistenZ) with DoomKernel V.03 (cwm/twrp)
but
after bricked
with FlashTools i cant connect my device.
i pressed volume down button and plug in it to my pc USB port.....
but in BLU window's doing nothing.... also in mobile there still no vibration or LED notification at all..
can i remove the battery Cable which is connect to Motherboard?
and then try to reconnect with Flashtools for Relocking my device....
shojeep said:
thank you for replying...
before bricked my phone i was using a Custom ROM (eXistenZ) with DoomKernel V.03 (cwm/twrp)
but
after bricked
with FlashTools i cant connect my device.
i pressed volume down button and plug in it to my pc USB port.....
but in BLU window's doing nothing.... also in mobile there still no vibration or LED notification at all..
can i remove the battery Cable which is connect to Motherboard?
and then try to reconnect with Flashtools for Relocking my device....
Click to expand...
Click to collapse
Isn't Fastboot mode volume +?
sid8840 said:
Happened with me when i shifted from normal rom to cm based rom
i just changed kernal by hitting fastboot mode and saved my day...
i have tried the kernal (boot.img) which was inside the 4.4 cm 11
hope u get it!!
Click to expand...
Click to collapse
Really appriciate for your helping comments....
but.
how do i suppose to do that, where no power no led and no response from FlashTools....?
please give some instruction Step by Step
I already have CM11 (4.4) kitkat with Gapps.
but how to give the kernel for cm11 4.4?
thnks...mate
Hey, first to answer your question, the CM 11 kernel is inside the ROM .zip called "boot.img". So just to understand you, you have had eXistenZ Ultra 1.3.7 (which is in case no ROM but a kind of update) and then you Installed mahdi ROM over it, right? And now your phone is like dropped into a pool. If so the chance to reanimate your phone is unfortunately very low. I heard about a USB-JIG and J-TAG which can help but don't know if that works.
Nevertheless, I hope I could help a little bit and good luck
Sent from my C5303 using xda app-developers app
try while pressing volume up and usb connected press the powrr button for a while
Sent from my C5303 using xda app-developers app
Nanostray said:
Isn't Fastboot mode volume +?
Click to expand...
Click to collapse
yap.... i tried with all the combination..... such as
volume up + power
volume down + power
power + volume down + volume up
back cover opend....and tried
Hard Off (hole) + Power
but no response to my phone...
reallly getting very sad....s ince i bought this phone just few months ago... although in my country zone... i don't have any warrenty issue for any sony device's....
thanks mates, for giving me your valuable times...out there.
keep faith
shojeep said:
yap.... i tried with all the combination..... such as
volume up + power
volume down + power
power + volume down + volume up
back cover opend....and tried
Hard Off (hole) + Power
but no response to my phone...
reallly getting very sad....s ince i bought this phone just few months ago... although in my country zone... i don't have any warrenty issue for any sony device's....
thanks mates, for giving me your valuable times...out there.
Click to expand...
Click to collapse
I'm sorry to hear none of it works, but don't give up yet mate, I'm sure someone here on the forum can help you!
Just to last check...
Press volume up (hold)
Now put ur usb in port of sp
See is there is any blue light
sent from my galaxy grand duos
no dude it should work
dont do anything else
just relax and
open the CMD in your computer
type fast boot flashboot boot.img (kernal file inside cm 11 zip file)
cmd windows will say waiting for the phone.
now connect the usb while pressing volume down and hold the power button for two to three seconds.
ther is nothing to hard brick the device.wht ur problem is u have wrong kernal for the rom to boot.(cm11 rom and it has doom kernal, becouse boot.img file from cm11 has not push to the phone correctly when flashing the cm rom.
make sure ur battery is not empty.
Sent from my C5303 using xda app-developers app
sid8840 said:
Just to last check...
Press volume up (hold)
Now put ur usb in port of sp
See is there is any blue light
sent from my galaxy grand duos
Click to expand...
Click to collapse
after charging with wall charger now device showing the red light.......
now what to do?
Press the offbutton behind the backflip until it vibrate 3 times. Then press vol+ and put the usb cabel into phone. Now there is a blue light! You are in fastboot mode and the phone is ready to flash the bootimage. that's all you have to do! Good luck!
Janith Olagama said:
no dude it should work
dont do anything else
just relax and
open the CMD in your computer
type fast boot flashboot boot.img (kernal file inside cm 11 zip file)
cmd windows will say waiting for the phone.
now connect the usb while pressing volume down and hold the power button for two to three seconds.
ther is nothing to hard brick the device.wht ur problem is u have wrong kernal for the rom to boot.(cm11 rom and it has doom kernal, becouse boot.img file from cm11 has not push to the phone correctly when flashing the cm rom.
make sure ur battery is not empty.
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
thnks for replying
but when i open cmd and type
fastboot flash boot boot.img and press enter
<waiting for device>
then while i press volume down either up it's blinkd the red light.....repetadly...
with flashtools i got nothing also...
please, replay
If red light comes after changing... That means your phone is not bricked
sent from my galaxy grand duos
@shojeep, first, calm down! Most of Sony's devices only brick when you try to do something with TA partition...
If you tried to flash a wrong kernel it will only softbrick.
first, breathe a little, keep calm and in hope is gonna work.
Now, with all the calm of the world,try the following: hold the glory hole poweroff button for 10 seconds (located on the back cover of the phone)
next, you will connect usb cable on phone (DONT CONNECT THE OTHER SIDE ON PC, JUST USB ON PHONE)
then, you have to hold just the vol+ button by 10 seconds, and NOW you connect the usb on PC. Phone should be detected by Windows 7.
now you open flashtool, and see if the phone is being detected by FlashTool.
if yes, hold power button until phone vibrates. Now you connect the phone on the pc holding vol- button to enter on flashmode
flash this: 2.254 kernel , and later flash the full ftf 2.254 to the phone.
hope it works.
Salo-S said:
@shojeep, first, calm down! Most of Sony's devices only brick when you try to do something with TA partition...
If you tried to flash a wrong kernel it will only softbrick.
first, breathe a little, keep calm and in hope is gonna work.
Now, with all the calm of the world,try the following: hold the glory hole poweroff button for 10 seconds (located on the back cover of the phone)
next, you will connect usb cable on phone (DONT CONNECT THE OTHER SIDE ON PC, JUST USB ON PHONE)
then, you have to hold just the vol+ button by 10 seconds, and NOW you connect the usb on PC. Phone should be detected by Windows 7.
now you open flashtool, and see if the phone is being detected by FlashTool.
if yes, hold power button until phone vibrates. Now you connect the phone on the pc holding vol- button to enter on flashmode
flash this: 2.254 kernel , and later flash the full ftf 2.254 to the phone.
hope it works.
Click to expand...
Click to collapse
thank you very much for replying
but...still got the problem.....
"hold the glory hole poweroff button for 10 seconds (located on the back cover of the phone)
next, you will connect usb cable on phone (DONT CONNECT THE OTHER SIDE ON PC, JUST USB ON PHONE)
then, you have to hold just the vol+ button by 10 seconds, and NOW you connect the usb on PC. Phone should be detected by Windows 7."
there is nothing appear on my windows screen, device manager, safe remove connectivity (also i have all the drivers installed adb/google-universal/sony pcc/sony update.
everything was closed....
after that....
there is red light appera on my mobile and stand by 2mins
in this 2 mins....i opend as you say-
"and see if the phone is being detected by FlashTool."
but in my flash tool screen i got-
"25/007/2013 00:07:24 - INFO - <- This level is successfully initialized
25/007/2013 00:07:24 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
25/007/2013 00:07:28 - INFO - Device disconnected
"
(2 mins finished)
and everything off again......(still connected with USB to PC)
no light .. no vibrate.
what to do now?
please, reply.
thanks for your helping advices and comments.....
Hello guys, I flashed kernel with existenz ultimate rom. Now the phone won't boot up nor charge.
Someone help me please. :crying:
AswinAuditore said:
Hello guys, I flashed kernel with existenz ultimate rom. Now the phone won't boot up nor charge.
Someone help me please. :crying:
Click to expand...
Click to collapse
Can you enter fastboot by holding VOL+ plugging phone into PC with USB (I think Vol+,)?
LaurynasVP said:
Can you enter fastboot by holding VOL+ plugging phone into PC with USB (I think Vol+,)?
Click to expand...
Click to collapse
No, its not even recognized in flashtool.
AswinAuditore said:
No, its not even recognized in flashtool.
Click to expand...
Click to collapse
You can try to leave your phone to charge whilst holding button's combination for the night (VOL+/VOL-/BOTH (i don't remember, somebody if know - please correct me)).
After that maybe your phone will be able even to enter the fastboot mode
LaurynasVP said:
You can try to leave your phone to charge whilst holding button's combination for the night (VOL+/VOL-/BOTH (i don't remember, somebody if know - please correct me)).
After that maybe your phone will be able even to enter the fastboot mode
Click to expand...
Click to collapse
I tried all key combinations but nothing works. Computer is not detecting phone when connected and phone is not charging or booting.
AswinAuditore said:
I tried all key combinations but nothing works. Computer is not detecting phone when connected and phone is not charging or booting.
Click to expand...
Click to collapse
Have you tried to leave your phone charging for several hours? You can give a try, maybe it will work
LaurynasVP said:
Have you tried to leave your phone charging for several hours? You can give a try, maybe it will work
Click to expand...
Click to collapse
Its on charge for more than 3 hours.
Your phone might be powered on but be unresponsive. Hold power and volume up for 15 seconds. The phone should vibrate once at about 10 seconds. Keep holding the keys for another 5 seconds and it should vibrate 3 times and power off.
You should then be able to connect in flashmode/fastboot and get your device booting.
Sent from my C6603
AswinAuditore said:
Hello guys, I flashed kernel with existenz ultimate rom. Now the phone won't boot up nor charge.
Someone help me please. :crying:
Click to expand...
Click to collapse
This happened to me when I accidentally flashed a Xperia z1 ftf to my Xperia z all I had to do was get a full stock Xperia z ftf get Flash tools ready and when it says to plug phone in flash mode you press and hold all 3 buttons (power,vol+and vol-) all at the same time till it vibrates once then let go of the power button and vol+ but keep holding vol - while plugging in the usb cable this will boot your phone into flash mode
And remember to have all wipe options ticked in flashtools
steparker1991 said:
This happened to me when I accidentally flashed a Xperia z1 ftf to my Xperia z all I had to do was get a full stock Xperia z ftf get Flash tools ready and when it says to plug phone in flash mode you press and hold all 3 buttons (power,vol+and vol-) all at the same time till it vibrates once then let go of the power button and vol+ but keep holding vol - while plugging in the usb cable this will boot your phone into flash mode
And remember to have all wipe options ticked in flashtools
Click to expand...
Click to collapse
It is not recognized by the flashtool. Maybe this is a hardware issue ?
AswinAuditore said:
It is not recognized by the flashtool. Maybe this is a hardware issue ?
Click to expand...
Click to collapse
Did you try the hard power off key combination that I suggested above? If the phone is powered on but unresponsive, then you cannot connect in flashmode. It needs to be powered off.
Out of interest, which kernel did you flash?
Sent from my C6603
kingvortex said:
Did you try the hard power off key combination that I suggested above? If the phone is powered on but unresponsive, then you cannot connect in flashmode. It needs to be powered off.
Out of interest, which kernel did you flash?
Sent from my C6603
Click to expand...
Click to collapse
Yeah tried those power buttons but no use.
I flashed hodor kernel and then eXistenZ Ultimate 3.0.0 .
kingvortex said:
Your phone might be powered on but be unresponsive. Hold power and volume up for 15 seconds. The phone should vibrate once at about 10 seconds. Keep holding the keys for another 5 seconds and it should vibrate 3 times and power off.
You should then be able to connect in flashmode/fastboot and get your device booting.
Sent from my C6603
Click to expand...
Click to collapse
Much Thanks ! your method work for my dead Xperia Tablet Z .. May god bless you
unfortunatly i tried THIS http://forum.xda-developers.com/xperia-z1/development/rom-dstrikerz1-kai-rom-1-0-t2928666 on my xperia z1 6902 and it stuck on sony logo .... not able to connect it in flashmode / sus / even not able to go in recovery ... what should i do ... my dad will surely kill me please me please i beg u
frendzarena said:
unfortunatly i tried THIS http://forum.xda-developers.com/xperia-z1/development/rom-dstrikerz1-kai-rom-1-0-t2928666 on my xperia z1 6902 and it stuck on sony logo .... not able to connect it in flashmode / sus / even not able to go in recovery ... what should i do ... my dad will surely kill me please me please i beg u
Click to expand...
Click to collapse
So u bricked the phone.... Its impossible u cant connect it in flash mode, hold the power button and the vol up button and hold them for a few secs, and u will feel 3 vibrations now we are sure that the phone is powered off. Then connect it to ur pc holding phone's power and vol up buttons to go in fastboot (green led as i remember). If u need more instructions to do more let me know, i'll try to help u. I bricked and hard bricked my phone many times and i always managed to recover it, flashing a new kernel with fastboot and installing a new rom/kernel.
fantamadnesss said:
So u bricked the phone.... Its impossible u cant connect it in flash mode, hold the power button and the vol up button and hold them for a few secs, and u will feel 3 vibrations now we are sure that the phone is powered off. Then connect it to ur pc holding phone's power and vol up buttons to go in fastboot (green led as i remember). If u need more instructions to do more let me know, i'll try to help u. I bricked and hard bricked my phone many times and i always managed to recover it, flashing a new kernel with fastboot and installing a new rom/kernel.
Click to expand...
Click to collapse
brother thanks for reply i am able to go in fastboot mode .. tell me what to do now please help me
frendzarena said:
brother thanks for reply i am able to go in fastboot mode .. tell me what to do now please help me
Click to expand...
Click to collapse
Well download fastboot and its drivers, download a kernel like doomkernel and extract the boot.IMG or The kernel.elf u find in the zip. Then u flash the kernel using : fastboot flash boot boot.img (or kernel.elf).
brother thanks for ur reply and help i used a ftf in flash mode and it worked thanks a ton ...