UI lag in JB i9070p - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

Hi. I installed JB on my phone, but the interface lags (after factory reset too). EXCEPT when I'm charging it. It runs buttery smooth then. Is it possible to fix something like that?

mantuzasoff said:
Hi. I installed JB on my phone, but the interface lags (after factory reset too). EXCEPT when I'm charging it. It runs buttery smooth then. Is it possible to fix something like that?
Click to expand...
Click to collapse
Try to install Cocore-E

But if you want to instal cocore, can I use the stock JB? I don't want to flash dodexe or smth like that

Yes, you can install any kernel you want without deodex the system
Sent from my GT-I9070 using xda premium

Yes. Installed it. It's good, well the lag is there, but it is smaller and the phone lags less. Thanks guys. Also, are there any custom roms on it?

http://forum.xda-developers.com/showthread.php?p=39167329
with that guide, you can install many (not sure if all) i9070 roms on our version
Gesendet von meinem GT-I9070P

Treshy said:
http://forum.xda-developers.com/showthread.php?p=39167329
with that guide, you can install many (not sure if all) i9070 roms on our version
Gesendet von meinem GT-I9070P
Click to expand...
Click to collapse
mostly all roms r compatible with GT-I9070 but check for roms current status that is it stable or not and then only flash it ....pure vanilla is stable , glaxeperia is stable , jetmod is ok but not so smooth ...atlast its ur choice . But try waiting for CM

yugant003 said:
mostly all roms r compatible with GT-I9070 but check for roms current status that is it stable or not and then only flash it ....pure vanilla is stable , glaxeperia is stable , jetmod is ok but not so smooth ...atlast its ur choice . But try waiting for CM
Click to expand...
Click to collapse
I installed Cocore with Vanilla. The phone's fast

Related

help me in updating

my brother mobile - optimus black - running gingerbird and it has a problem which is when open the browser - while connected to home wifi - always gives web page not available !! ... i have a galaxy tab and samsung wave and they running well with home wifi so the problem with the optimus black
so i decied to update it with ics to see if the problem will be fixed or not also cause gb is boring and he want to update
but the problem is that his mobile still in warrenty actually he bought it a month ago so i read that if i updated it with cm9 or these stuff it will brick the warrenty !! is there any way to restock again if he wil go to maintaince for any stuff ?
also what is the best rom and the most stable one with zero bugs ? cause we will not try alot of roms he will use the rom till the official ics is on
so i will need ur help with that and i will be very pleased
Simple... Flash an unrooted version of stock GB rom... They'll have no way to figure out that it was rooted...
Sent from my iPotato
if it is as simple as u said so i will update it 2morow
so what rom should i flash now ? the best one suitable for new lg user wanting stable ics and bug free as possible !! and how to do the flash process and root issues
Wait for stable ics
Sent from my LG-P970 using xda premium
There's no stable ics yet... Wait until this month's end.. You'll have one by then I hope... Meanwhile, flash cm7...go for boype's modded cm.. Stable enough for daily use
Sent from my Potato
as i told u about the internet problem so i want to try ics to see wether the proble fixed or not so i downloaded cm9 unofficia but where is kernal files
and i want to know how flash it ?
Mohaakotb said:
as i told u about the internet problem so i want to try ics to see wether the proble fixed or not so i downloaded cm9 unofficia but where is kernal files
and i want to know how flash it ?
Click to expand...
Click to collapse
ClockworkMod. ROM Manager - Play Store. I advice you AOKP. Its much more smooth
Sent from my LG-P970 using Tapatalk 2
Mohaakotb said:
as i told u about the internet problem so i want to try ics to see wether the proble fixed or not so i downloaded cm9 unofficia but where is kernal files
and i want to know how flash it ?
Click to expand...
Click to collapse
The kernel files are included in the zip... Just boot into recovery, and flash the rom, make dalvik, cache and data wipes, and you're done
Sent from my Potato
SoulExertz said:
ClockworkMod. ROM Manager - Play Store. I advice you AOKP. Its much more smooth
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
how to run these stuff ?

[Q] Best JB update for I9070

What is the best jelly bean update for Samsung Galaxy S Advance? in terms of smoothness and performance
iso188 said:
What is the best jelly bean update for Samsung Galaxy S Advance? in terms of smoothness and performance
Click to expand...
Click to collapse
If you want Samsung's original JB you can try I9070ITVLQ3 (with I9070XXLQG baseband), but you have to root it, debloat (ie eliminate unnecessary apps, you can find a guide to do it and root on xda) and change kernel (for stock rom I prefer CoCore). For now the best is CM10.1 by Team Canjica, you can also try CM10.2 by the same team.
o no, no -LightJBv1-2 is very stable, battery ok, games ok,
Can anybody give me link for i9070tvlq3.. and can we flash it in cwm?? Or we have to use odin..
Sent from my GT-I9070 using xda premium
krunal borse said:
Can anybody give me link for i9070tvlq3.. and can we flash it in cwm?? Or we have to use odin..
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Firmwares are only flashing with Odin, so you can't use CWM. On other thread I answered you to look here http://samsung-updates.com/
Thanks for that n i also wanted to ask that i have i9070ddlup8 stock rom how shud i deodex it i want the crt off effect to work and i saw it in some thread that it needs a de odexed rom so can anybody tell me how to de odex it..
If it needs any zip then plz specify that zip too..
Please.....
Sent from my GT-I9070 using xda premium
krunal borse said:
Thanks for that n i also wanted to ask that i have i9070ddlup8 stock rom how shud i deodex it i want the crt off effect to work and i saw it in some thread that it needs a de odexed rom so can anybody tell me how to de odex it..
If it needs any zip then plz specify that zip too..
Please.....
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Is it ddulp8, not ddlup8?
Download this: http://d-h.st/GxG
You need custom recovery. Do you have CoCore kernel installed? If you do, go to recovery (power on phone with VolumUP+Home+Power buttons hold at the same time untill you fill some vibration). There go to Install from SD card, if you put that zip in internal, and install it. Do the same with that crt mod.
More explanation - what you need before using mod:
1. ROOT.
2. CoCore.
For first install of CoCore do this: Install Universal kernel flash, and some explorer with root permissions like Root explorer or ES file explorer. Download CoCore zip, unpack it and use kernel.bin.md5 file with Universal kernel flash. After that you will get CWM or TWRP (depends what CoCore version you choose). From that part you can install CRT off MOD by installing its zip from recovery.
light jb is best stock based rom.
Sent from my GT-I9070 using XDA Premium 4 mobile app
New update
What about I9070XXLQL?
Did anyone try it?
iso188 said:
What about I9070XXLQL?
Did anyone try it?
Click to expand...
Click to collapse
I tried, its the smoothest jellybean firmware in my opinion
iso188 said:
What is the best jelly bean update for Samsung Galaxy S Advance? in terms of smoothness and performance
Click to expand...
Click to collapse
I use the ROM LP8 and I think quite soft
JB Versus GB
[email protected] said:
I tried, its the smoothest jellybean firmware in my opinion
Click to expand...
Click to collapse
Is it smoother and faster than Gingerbread? If not, Is it slower or just the same?
iso188 said:
Is it smoother and faster than Gingerbread? If not, Is it slower or just the same?
Click to expand...
Click to collapse
It would be more lag than on gb i guess, but gingerbread is kinda old right now isnt it, i think it's time for u to upgrade too.Well it is ur choice
Best jb for our device is Philippine jellybean.?
[ sent from my mind ]
my jb baseband is dxamd1 from phil coz im from phil too... and to me it looks stable enough with cm 10.2 11-18
Thanks
Thank you guys. I appreciate your help.
I think I will give I9070XXLQL a try
Another question
[email protected] said:
It would be more lag than on gb i guess, but gingerbread is kinda old right now isnt it, i think it's time for u to upgrade too.Well it is ur choice
Click to expand...
Click to collapse
I have another question, Did you notice a degradation in the performance after the update?
iso188 said:
I have another question, Did you notice a degradation in the performance after the update?
Click to expand...
Click to collapse
Yes i did. Before i upgraded my phone to jellybean, everything was so smooth on gb, multitasking, gaming performance are really better on gb when compared to jellybean. My phone still can run smoothly even though i have installed 50 ++ apps when im on gb ,but not anymore when im on jellybean. So the stability, gaming performance and multitasking performance are better in gb. If upgrade to jellybean u can get to experience a newer firmware but at the cost of some performance degradation. But actually jellybean also not that bad just will become laggier when ur system becomes heavy and bad multitasking performance only. Also as soon as u upgraded to jellybean, u can get to flash any custom rom available which will help u to solve the lag problem.
[email protected] said:
Yes i did. Before i upgraded my phone to jellybean, everything was so smooth on gb, multitasking, gaming performance are really better on gb when compared to jellybean. My phone still can run smoothly even though i have installed 50 ++ apps when im on gb ,but not anymore when im on jellybean. So the stability, gaming performance and multitasking performance are better in gb. If upgrade to jellybean u can get to experience a newer firmware but at the cost of some performance degradation. But actually jellybean also not that bad just will become laggier when ur system becomes heavy and bad multitasking performance only. Also as soon as u upgraded to jellybean, u can get to flash any custom rom available which will help u to solve the lag problem.
Click to expand...
Click to collapse
That's bad. I think I will stay on gb and wait for kitkat if it will be released for my phone. I heard that it consumes less ram than jb which is good for midrange devices like mine.
iso188 said:
That's bad. I think I will stay on gb and wait for kitkat if it will be released for my phone. I heard that it consumes less ram than jb which is good for midrange devices like mine.
Click to expand...
Click to collapse
In terms of performance, you can just try to upgrade to JB, root it and then you can try any kernel customization which tweaks the performance too.
And to think that i9070s will get any further update than JB, it would be impossible...it just is
Sent from my GT-I9070 using xda app-developers app
---------- Post added at 01:46 AM ---------- Previous post was at 01:41 AM ----------
Oh! I personally recommend Macedonian JB rom. The performance and battery life are much better
Sent from my GT-I9070 using xda app-developers app

[Q] My Ace is slowly dying

Hello
I have a problem with my Ace, and I do not know what's going on.
Every few days, my storage clears itself, and I have to re-flash the original ROM via odin.
I have tried ROMs other than stock, but the problem is still there.
It is really annoying, as my messages and contacts are also cleared.
What could be causing this? I am on the brink of throwing it out the window!
Please help
rabbitvcactus
What roms did you tried out ?
Gesendet von meinem GT-S5830 mit Tapatalk 2
Blackbox421 said:
What roms did you tried out ?
Gesendet von meinem GT-S5830 mit Tapatalk 2
Click to expand...
Click to collapse
I have tried Cupcake's CM10.1 and mardon's CM10.2, as well as CM7.2 Jellybread.
Hope that helps
rabbitvcactus
rabbitvcactus said:
I have tried Cupcake's CM10.1 and mardon's CM10.2, as well as CM7.2 Jellybread.
Hope that helps
rabbitvcactus
Click to expand...
Click to collapse
don't use too much apps and use performance scripts like fly on mod or pure performance if you see slow performance
also as you use roms like cm 10.1 by mardon and cup cake don't expect them to have god speed {though it is cm}
install apps as much as you can on sd card and leave phone memory and see the change in phone
also do a wipe cache in recovery
aditya rathee said:
don't use too much apps and use performance scripts like fly on mod or pure performance if you see slow performance
also as you use roms like cm 10.1 by mardon and cup cake don't expect them to have god speed {though it is cm}
install apps as much as you can on sd card and leave phone memory and see the change in phone
also do a wipe cache in recovery
Click to expand...
Click to collapse
Even the stock rom clears itself every day (roughly).
it is fast, performance wise, when it works.
When i say wipes itself, i mean nothing but download mode usable.
rabbitvcactus
rabbitvcactus said:
Even the stock rom clears itself every day (roughly).
it is fast, performance wise, when it works.
When i say wipes itself, i mean nothing but download mode usable.
rabbitvcactus
Click to expand...
Click to collapse
may be your sd card or phone memory are infected
...
Android hasn't virus...
How old is your Ace?
Sent from my C5303 using Tapatalk
Its about a year old
Sorry about the wait
rabbitvcactus

[Q] How to fix laggy JB

I'm using official JB firmware on my GT-I9070 device and its laggy and hangs frequently. It requires frequent restarting and reseting after a short period of usage. Is there any fix for this without rooting??
navinm_d0 said:
I'm using official JB firmware on my GT-I9070 device and its laggy and hangs frequently. It requires frequent restarting and reseting after a short period of usage. Is there any fix for this without rooting??
Click to expand...
Click to collapse
JB(4.1.2) is laggy and not effective solution.
better try custom roms and enjoy.
My device once had stock JB and it worked well indeed. However, it probably needs time to settle in and will be smoother. Every rom is laggy at the very beginning of usage after flashing.
Root your phone, and flash cocore kernel. Better yet, install HarshJelly, it's a stock based rom. Or any custom rom if you prefer. Nothing much you can do if you don't want to root your phone. Or maybe upgrade your jb firmware to the latest one, LQL
Sent from my GT-I9070 using Tapatalk
^ This.
HarshJelly + cocore, problem solved.
Hey can anyone provide link to the latest cocore kernel.... M new to this forum
Thanks in advance
Sent from my Nexus 5 using XDA Premium 4 mobile app
ashish.kmc08 said:
Hey can anyone provide link to the latest cocore kernel.... M new to this forum
Thanks in advance
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here you go : http://forum.xda-developers.com/showthread.php?t=2140597
Stock firmware (any jb) +cocore 6.8 stable = best!
Tarola said:
Stock firmware (any jb) +cocore 6.8 stable = best!
Click to expand...
Click to collapse
should i use 6.8 or the latest version??
Latest version (9.0) allows CPU overclocking. Your phone may or may not be stable at 1.28ghz, instead of stock 1 ghz.
If it turns out to be a problem, then go back to 8.6, 6.8 is hopelessly old... or just use no frills CPU control to set your cpu back to 1 ghz and enjoy 9.0
Stock 4.1.2 + cocore 9.0 flies...
Just set your cpu to 1.0
Sent from my GT-I9070 using xda app-developers app
ashish.kmc08 said:
should i use 6.8 or the latest version??
Click to expand...
Click to collapse
6.8 works on 3 advance without problems. all others versions lags/reboots etc (for me)
9.0 testing
If you want to stick with stock firmware mean root it and uninstall the bloatware comes with stock os. Use the greenify app to stop the unwanted apps running in background.
Or else try custom jelly or kit Kat Rom. Lot of roms available for our model.
Your wish
Sent from my GT-I9070 using xda app-developers app
Try using JB Stock without SDCARD.
If the problems go away this is the problem.
I suspect that the JB version for SGA has trouble dealing with SDCARD. It is no coincidence that the internal storage has been a priority for several most current devices.
Unfortunately we have very little internal storage.
Advise a SDCARD good quality and good speed.
Also avoid occupy it completely. This goes also for internal storage.
Another good practice is to optimize from time to time the SDCARD.
Tarola said:
6.8 works on 3 advance without problems. all others versions lags/reboots etc (for me)
9.0 testing
Click to expand...
Click to collapse
9.0 tested => going back to 6.8 no lag just fly
Tarola said:
9.0 tested => going back to 6.8 no lag just fly
Click to expand...
Click to collapse
reverted to 6.8 (previous version that I use) and go back to 9.0 no lag
Try install google home and feel the difference..its more smooth than touchwiz...
Sent from my GT-I9070 using XDA Premium 4 mobile app
Tarola said:
6.8 works on 3 advance without problems. all others versions lags/reboots etc (for me)
9.0 testing
Click to expand...
Click to collapse
I use Cocore 8.2. long time without lags, freezes, hangs, etc..
Happened a reboot , but only one in months using normally.
Totally Acceptable.Probably no connection with JB Stock or kernel. But Android itself
Dialer, message, etc..Only replaced and solved.
Stock camera has also worked well. Just always use internal storage and no more problems.
Launcher: "NOVA" . Smooth and without lags.
Anyway, using for months, I have no more complaints about stock JB.
SGA is not the fastest smart and has only 768 RAM, but everything works fine with JB Stock.
Of course I'll try AOSP or CM in final version.

Fastest ROM?

I just got this device recently and I immediately flashed CM9 which turned out to be very slow on this device.
I don't need any of the special features of ICS/JB/KK, I just want a fast ROM. Is CM7 the fastest?
Thanks!
If you have non-cdma version, flash KitKat.
Android 4.x has better feature, better app support, and stability.
Also, if you feel slow, greenify, seeder etc. will speed up a lot.
knickfan5745 said:
I just got this device recently and I immediately flashed CM9 which turned out to be very slow on this device.
I don't need any of the special features of ICS/JB/KK, I just want a fast ROM. Is CM7 the fastest?
Thanks!
Click to expand...
Click to collapse
Yup cm7 is the fastest. Cm11 kinda lags for me.
Gesendet von meinem GT-I9505 mit Tapatalk

Categories

Resources