Database Develop

samsung galaxy s 2.2.1 to 2.3.3 whit kies?

hello,
i saw on tweakers.net that the update for the samsung galaxy s is avaleble.
i got now version 2.2.1 i want to update it to 2.3.3 when i start kies and i connect my phone. it dosnt say there is a update. i saw on the internet that it isnt avaleble in the netherlands. how long i need to wait till i can update my galaxy? i can i do it now. i only want the original updates and no custom roms.
xorium

You will just have to be patient. It was released but then taken down, so just got to wait.

Samsung temporarily pulled the update due to unspecified "issues" so who knows how long you will have to wait.
I'd just download and flash the official update with Odin but that's up to you.

What if I install Galaxy S Gingerbread ROM (XXXJVK) and later I want to update it through Kies with the last version that will be further published by Samsung? Would that be possible or I would need to perform any kind of 'rollback' before update it?
Also, is there an official Galaxy S ROM for 2.3.3 ?
Thank you. New here.

willian7 said:
What if I install Galaxy S Gingerbread ROM (XXXJVK) and later I want to update it through Kies with the last version that will be further published by Samsung? Would that be possible or I would need to perform any kind of 'rollback' before update it?
Also, is there an official Galaxy S ROM for 2.3.3 ?
Thank you. New here.
Click to expand...
Click to collapse
\Kies will only update original firmware .
You will need to roll back to a later firmware and spoof Kies to believe its your original rom to get update .
Also, is there an official Galaxy S ROM for 2.3.3 use JVK or later from samfirmware .
jje

Thanks, JJE.
Hum, not sure now. It seems too much work
;/

Hi, i have a SGS and these are my data:
*#1234#
PDA: I9000XWJPH
PHONE: I9000XXJPP
CSC: I9000OXXJP9
BUILD: 2010.12
*2767*4387264636#
PCODE: GT-I9000HKYEUR
but kies don't want to upgrade my phone... I would only use the official way
Can you help me??

psaico said:
Hi, i have a SGS and these are my data:
*#1234#
PDA: I9000XWJPH
PHONE: I9000XXJPP
CSC: I9000OXXJP9
BUILD: 2010.12
*2767*4387264636#
PCODE: GT-I9000HKYEUR
but kies don't want to upgrade my phone... I would only use the official way
Can you help me??
Click to expand...
Click to collapse
IS THERE AN UPGRADE FOR YOUR PRODUCT CODE
if not Kies can not upgrade something that does not exist yet .
jje

Gingerbread 2.3.3 official??

Hello is my Samsung Firmware which i installed trough Kies official or not?
It says: Firmware-Version: 2.3.3
I9000XXJVO
2.6.35.7-i9000XXJVO-CL182937
[email protected] #2
Gingerbread.XXJVO
Is that the newest official Version of Gingerbread or just an flashed modded Firmware?? I used spooffw to upgrade the Firmware. What meand XXJVO or 2.6.35-7??
Thank your very much for your answers and sry for my bad german influenced english

If you installed it through kies, then it is official.
BTW, there is a Q&A section...

cabessius said:
If you installed it through kies, then it is official.
BTW, there is a Q&A section...
Click to expand...
Click to collapse
Wooaaa...not necessarily....not if he used spooffw...he is using a later fw based on the settings chosen in spooffw...but not necessarily the latest official fw available for his device, carrier and region....he has fooled kies into downloading JVO remember.
@ftj3kf3
Firstly - JVO IS official - but its a XEU region (UK) variant
It HAS been supplied via Kies (so its "official" Samsung fw)
However as you are in Germany you presumably had to enter XEU as the product code to fool Kies and get the download.
so yes you are running an official Samsung GB release, but not necessarily the current one for your region and supplier...but don't worry everything is cool, 2.6.35.7-i9000XXJVO-CL182937 [email protected] # is the kernel version....you are just probably ahead of the game for your region, that's all

[Q] Gingerbread 2.3.3 galaxy s

Hi i have the following firmware this is an official firmware
PDA:JPE/PHONE:JPB/CSC:JPA (KOR).
but this is froyo 2.2 and i understand that there is an official update of 2.3.3 and i would like to update to it but the problem is Kies says
This version of the device cannot be updated
can someone please direct me to a proper official firmware so that i can enjoy the gingerbread benefits and i tried to look around for any good sources but none are helpful and also i read that there are force close issues with the 2.3.3 on some apps is this serious? tks

jackandjill20101 said:
Hi i have the following firmware this is an official firmware
PDA:JPE/PHONE:JPB/CSC:JPA (KOR).
but this is froyo 2.2 and i understand that there is an official update of 2.3.3 and i would like to update to it but the problem is Kies says
This version of the device cannot be updated
can someone please direct me to a proper official firmware so that i can enjoy the gingerbread benefits and i tried to look around for any good sources but none are helpful and also i read that there are force close issues with the 2.3.3 on some apps is this serious? tks
Click to expand...
Click to collapse
I think kies is the only official way to upgrade your SGS.
So, wait for Kies fixing this problem or go to http://www.samfirmware.com/WEBPROTECT-i9000.htm and flash one with odin

so the samfirmware is an official as in not my region but i am still ok with it as i am from singapore and malasiya has already got it... tks for the quick reply though

[Q] Do I have stock firmware installed?

Hi guys,
After messing around with kernels and getting a non responding P1000, I managed to install from Samfirmware, what i believe is stock Gingerbread (Europe).
Everything looks and works fine, but I just want some reassurance that I've downloaded/installed it correctly.
My system details are:
PDA: P1000XXJQ1
PHONE: P1000XXJPZ
CSC: P1000OXAJQ1
Firmware version: 2.3.3
Baseband version: P1000XXJPZ
Kernel version: 2.6.35.7 [email protected] #2
Build number: GINGERBREAD.XXJQ1
The only reason I want reassurance is when I connect the tab to Kies, the message "this version cannot be updated" displays.
Is it the fact that this is the latest firmware, and therefore no more updates is available?
Thank you in advance and would be much appreciated and reassuring to get an answer for all you kind people.

If you have a tab that was bought throughg a specific carrier then Kies might not be able to update the firmware.
I have a GTab from Telstra in Australia and using the stock firmware I also get this message. All flashing must be done by either ODIN or HEIMDALL. CWM works so long as I don't need to restock anything....
If you do decide to change roms, make sure you check to see if the bootloaders aren't locked as some of the firmware from samfirmware were found to be resulting in problems...
Cheers...

I had exactly the same message from Kies when I tried to revert back to a stock Gingerbread rom. It seems that there isn't an official Samsung release of GB for Tab P1000 in the UK (if that's where you are) so it doesn't recognise it.
Only way I could get it to detect an official release was with a Froyo ROM.

The JQ1 was released not to Europe, but to Italy.

JibbaJoy said:
I had exactly the same message from Kies when I tried to revert back to a stock Gingerbread rom. It seems that there isn't an official Samsung release of GB for Tab P1000 in the UK (if that's where you are) so it doesn't recognise it.
Only way I could get it to detect an official release was with a Froyo ROM.
Click to expand...
Click to collapse
Yes that's right. Im in the UK. So from what i understand, only way to fully revert back and install Official gingerbread is by reverting than earlier froyo firmware and then connecting Kies thks way, then have it detect and install the newly released gingerbread?

rangercaptain said:
The JQ1 was released not to Europe, but to Italy.
Click to expand...
Click to collapse
Hi there, yeah i kinda thought the firmware i installed was the Italian release, as the date in Firmware was May, not July when the.official gingerbread was released.

Yep, that's how I understand it. However I probably will not even bother with Samsungs UK GB release as there are much better 3rd party GB options out there already. I'm running BOCA 1.5 and it is so fast - it dosn't have any Samsung apps or TouchWiz, but I haven't missed them.

JibbaJoy said:
Yep, that's how I understand it. However I probably will not even bother with Samsungs UK GB release as there are much better 3rd party GB options out there already. I'm running BOCA 1.5 and it is so fast - it dosn't have any Samsung apps or TouchWiz, but I haven't missed them.
Click to expand...
Click to collapse
Ha! Just found the XDA app, makes posting and browsing on here so much easier.
Yeah i would have thought 3rd party options would be better running as they'll omit all the bloatware that comes with the official release. I was just thinking more about the option for the future should i have any reason at all to revert back to legit stock.
There's so many recommendation on which custom Rom to install, i think I'll have to spend some time going through the forums to understand which one will be best for me.
For now, Im gonna stick with this working GB (albeit Italy release) as for now it works and I've not had any problems with doing what i want out of it.
Sent from my GT-P1000 using XDA App

The lastest gb released isn't UK, its for Orange Spain.

[Q] i want to change my Note N7000 firmware

i bought my galaxy note N7000 and update to jelly bean did not come to my country yet, so i updated it manually through firmware from Smmobile.com that came for devices in Hong-Kong , but it turned to be that the firmware does not have Arabic language , so when the update comes to my country LEBANON , what should i do to change the version to the one dedicated to my country? noting that i also have rooted my phone to increase clockwork in it , so help me guys, what should i do ?

moefatha said:
i bought my galaxy note N7000 and update to jelly bean did not come to my country yet, so i updated it manually through firmware from Smmobile.com that came for devices in Hong-Kong , but it turned to be that the firmware does not have Arabic language , so when the update comes to my country LEBANON , what should i do to change the version to the one dedicated to my country? noting that i also have rooted my phone to increase clockwork in it , so help me guys, what should i do ?
Click to expand...
Click to collapse
The Stock Rom for Algeria or UAE has Arabic support (JPLSB). Install with PC Odin for unrooted stock Rom.
Or use my Pristine All Languages with working Arabic Support in v2.3.

ThaiDai said:
The Stock Rom for Algeria or UAE has Arabic support (JPLSB). Install with PC Odin for unrooted stock Rom.
Or use my Pristine All Languages with working Arabic Support in v2.3.
Click to expand...
Click to collapse
i downloaded the UAE Rom, should i install it normally like the first time? my device is rooted, i havbe odin on my computer, will this affect my data or settings? i dont want to wipe my data.
And please what advantages comes with your pristine Rom.
thx