Related
A friend of mines son was installing roms on his HTC Hero and bootlooped it. I've followed all the methods I could find to put this thing in a flash mode, or a recovery mode but all it does is flash the HTC logo. Home/End seems to be the way to get into the recovery mode but it does nothing.
Can you put this thing into a flash only mode and at least get it to its original state? It is unknown as to what exactly he did to it. I was told that he had been installing lots of roms and eventually one made it do this.
I found this link http://forum.xda-developers.com/showthread.php?t=682551&page=2 but pushing the volume up/end keys only makes it vibrate 3 times then sit idle not doing anything.
thanks.
talktojer said:
A friend of mines son was installing roms on his HTC Hero and bootlooped it. I've followed all the methods I could find to put this thing in a flash mode, or a recovery mode but all it does is flash the HTC logo. Home/End seems to be the way to get into the recovery mode but it does nothing.
Can you put this thing into a flash only mode and at least get it to its original state? It is unknown as to what exactly he did to it. I was told that he had been installing lots of roms and eventually one made it do this.
I found this link http://forum.xda-developers.com/showthread.php?t=682551&page=2 but pushing the volume up/end keys only makes it vibrate 3 times then sit idle not doing anything.
thanks.
Click to expand...
Click to collapse
The only way to effectively help you/him is to know how he got there, and what recovery/rom/kernel/theme/etc he is running. It would also help to know if this phone has an eng-spl fastboot or an s-off hboot.
il Duce said:
The only way to effectively help you/him is to know how he got there, and what recovery/rom/kernel/theme/etc he is running. It would also help to know if this phone has an eng-spl fastboot or an s-off hboot.
Click to expand...
Click to collapse
theres no standard way to get to a flash mode with a sprint htc hero? what are some other key combinations i might try?
talktojer said:
theres no standard way to get to a flash mode with a sprint htc hero? what are some other key combinations i might try?
Click to expand...
Click to collapse
you mean like this: hold home and then power?
il Duce said:
you mean like this: hold home and then power?
Click to expand...
Click to collapse
yeah, so if that didnt work..screwed?
talktojer said:
yeah, so if that didnt work..screwed?
Click to expand...
Click to collapse
Not really... in very rare cases has the hero been bricked.
If nothing else, you could always run the Sprint/HTC RUU through your computer, that will restore the Hero to "Out-of-Box" state. From there you could root back again and flash any ROM you would like.
With the phone turned off, press and hold the volume up button. Whole holding it press the power button. When you see the logo let go of the volume up button. If that doesn't work you'll have to run an ruu from fastboot or get a hercimg and flash it from fastboot.
Sent from my HERO200 using XDA App
unCoRrUpTeD said:
With the phone turned off, press and hold the volume up button. Whole holding it press the power button. When you see the logo let go of the volume up button. If that doesn't work you'll have to run an ruu from fastboot or get a hercimg and flash it from fastboot.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
how do I get into this fastboot mode? I'd love to restore it to factory software, but I'm unable to figure out how to get the phone into a mode that the PC will recognize. Volume up/end vibrates 3 times but never actually turns on or shows a logo. just stays black. If I could get this thing back to its original state that would be great.
unCoRrUpTeD said:
If that doesn't work you'll have to run an ruu from fastboot or get a hercimg and flash it from fastboot.
Click to expand...
Click to collapse
Anyone know how to do this? I can't figure out how to get into the fastboot mode. I run the ruu executable, and it says it can't find the phone. I'm sure I need to put it in some kind of flash mode, but seem to be unable.
Not to hijack your thread, but I'm having this same problem. I've run several ROMs including cyanogen 6.0 and 6.1 and today was installing the cyanogen 7 with 2.3 android. I wiped everything and flashed the rom and the gapps and the phone went into constant reboot cycles. I could at that point, hold the power/home and get it back to the recovery menu. I had the Amon RA recovery and thought I would try the 3.0 clockwork, so I flashed that recovery image...rebooted without a problem. I tried wiping and reflashing, but still the constant reboot. So I took the advice on the wiki and flashed the DecaFuct-12222010-691.zip kernel. My phone rebooted and did not start the cycling, so I thought it was an improvement. However, 1/2 an hour later, it's still sitting at the HTC logo and the power/home does not reboot into recovery. Nor does trying to adb find any devices.
Apparently I haven't posted enough on these forums to be able to post to the dev thread. But I've done some base development work on the phone and have been using adb for over a year now. Any help on getting back to a working phone would be greatly appreciated!
Lynne
Ah, a coworker manager to get the buttons to respond. Yay! At least I'm back to recovery and can push a different ROM. Tho not CM7 since it keeps rebooting constantly!
lrandolph said:
Ah, a coworker manager to get the buttons to respond. Yay! At least I'm back to recovery and can push a different ROM. Tho not CM7 since it keeps rebooting constantly!
Click to expand...
Click to collapse
any idea what he/she did to get the buttons to respond? I still am unable to get into the recovery mode.
talktojer said:
any idea what he/she did to get the buttons to respond? I still am unable to get into the recovery mode.
Click to expand...
Click to collapse
First, power off and remove the battery. Make sure the USB is not plugged in
This is why you get 3 vibrations and no power on. If it does this again, remove the battery and start over
With the power off and the USB unplugged, hold Vol Up and press power on (End key)
It should then boot into fastboot. (a white page with green letters) At this time, plug the USB in (should change from Fastboot to Fastboot USB) and run the RUU .5 or .6 from your computer.
AT some point the RUU install will say waiting for bootloader. When this happens, you will already be in bootloader (Fastboot USB)
This should work to get you back to fully unrooted stock ROM. From there, reroot, install a custom recovery and rom.
Let me know if this works
ccrosno said:
First, power off and remove the battery. Make sure the USB is not plugged in
This is why you get 3 vibrations and no power on. If it does this again, remove the battery and start over
With the power off and the USB unplugged, hold Vol Up and press power on (End key)
It should then boot into fastboot. (a white page with green letters) At this time, plug the USB in (should change from Fastboot to Fastboot USB) and run the RUU .5 or .6 from your computer.
AT some point the RUU install will say waiting for bootloader. When this happens, you will already be in bootloader (Fastboot USB)
This should work to get you back to fully unrooted stock ROM. From there, reroot, install a custom recovery and rom.
Let me know if this works
Click to expand...
Click to collapse
here's what happens.
1. Remove battery
2. Replace battery
3. Press and hold volume up
4. While holding volume up, press and hold end key to turn unit on.
5. Unit vibrates 3 times and never powers on
This is without USB plugged in.
I asked the guy who owns the phone what he was doing, he said he had flashed ASOP Gingerbread or something and it never worked again.
talktojer said:
here's what happens.
1. Remove battery
2. Replace battery
3. Press and hold volume up
4. While holding volume up, press and hold end key to turn unit on.
5. Unit vibrates 3 times and never powers on
This is without USB plugged in.
I asked the guy who owns the phone what he was doing, he said he had flashed ASOP Gingerbread or something and it never worked again.
Click to expand...
Click to collapse
Interesting. Mine only does the 3 vibrate thing when I have the USB plugged in and I am trying to enter Fastboot. I unplug the USB, remove the battery, replace the battery, hold vol up and press end. Bing, right into Fastboot.
Do you know if he has the ENG SPL/S-Off installed? If not, the issue may lay in that. Not for sure though.
Also, it may have to do with the way the phone was originally rooted, that has an affect on things as well. Some of the overclocked kernels have an affect on boot. Some Heros wont boot with the kernel set to over 691.
I have installed every build pf ASOP 2.3.2 GB that has been posted, now grated they each had there issues but none of them put me in a loop or froze the phone.
I would also suggest downloading android commander to your computer. Just Google android commander and you will find it. With this program you can boot to bootloader. If you are getting to the HTC screen then Android Commander should recognize the phone. It is a great program.
talktojer said:
Anyone know how to do this? I can't figure out how to get into the fastboot mode. I run the ruu executable, and it says it can't find the phone. I'm sure I need to put it in some kind of flash mode, but seem to be unable.
Click to expand...
Click to collapse
Not sure, but you may try removing the sdcard and/or putting a different one in. Or when the phone first gets to the HTC screen press and hold the menu button and keep holding it.
Sent from my dual-booted liquidsense 2.1
unCoRrUpTeD said:
Not sure, but you may try removing the sdcard and/or putting a different one in. Or when the phone first gets to the HTC screen press and hold the menu button and keep holding it.
Sent from my dual-booted liquidsense 2.1
Click to expand...
Click to collapse
ive removed the sdcard, results are no different.
ccrosno said:
Interesting. Mine only does the 3 vibrate thing when I have the USB plugged in and I am trying to enter Fastboot. I unplug the USB, remove the battery, replace the battery, hold vol up and press end. Bing, right into Fastboot.
Do you know if he has the ENG SPL/S-Off installed? If not, the issue may lay in that. Not for sure though.
Also, it may have to do with the way the phone was originally rooted, that has an affect on things as well. Some of the overclocked kernels have an affect on boot. Some Heros wont boot with the kernel set to over 691.
I have installed every build pf ASOP 2.3.2 GB that has been posted, now grated they each had there issues but none of them put me in a loop or froze the phone.
I would also suggest downloading android commander to your computer. Just Google android commander and you will find it. With this program you can boot to bootloader. If you are getting to the HTC screen then Android Commander should recognize the phone. It is a great program.
Click to expand...
Click to collapse
android commander relies on adb..i've already tried adb and it can't see the device. already tried that the first night. I think I'm about out of options.
talktojer said:
android commander relies on adb..i've already tried adb and it can't see the device. already tried that the first night. I think I'm about out of options.
Click to expand...
Click to collapse
Interesting you say that. Here are 2 snips taken at the same time. One of my ADB shell showing no devics found and the other of my android command shell clearly showing connection to the device.
Try the android commander. It is a great program and it is GUI based.
Let me know
Edit: Even stranger, although ADB shows no devices, if I type LS, a list of the phone directories shows up.
ccrosno said:
Interesting you say that. Here are 2 snips taken at the same time. One of my ADB shell showing no devics found and the other of my android command shell clearly showing connection to the device.
Try the android commander. It is a great program and it is GUI based.
Let me know
Edit: Even stranger, although ADB shows no devices, if I type LS, a list of the phone directories shows up.
Click to expand...
Click to collapse
You would actually do
adb devices
You don't do it from inside adb.
Sent from my dual-booted liquidsense 2.1
Hello people,
I recently installed GalaxySense Rom (Search "oozeroo" on Google) for my Samsung Captivate AT&T, and it was working fine, until I changed a few settings, then it said it was going to Hot Boot, so the hot boot worked fine. Then, I turned off my phone and turned it back on, and it does not boot. I tried some stuff (check the Situations). My phone is stuck at "Galaxy S Cyanogen(Mod)" (Picture Included!!!)
Situation:
-No Download Mode
-No recovery mode
-Flashed this rom with rom manager (wiped dalvik cache only)
-TRIED installing Clockworkmod recovery, but wont work (not booting into recovery)
-Only an internal SD inside phone, 14 Gigs.
(Ask me for more info if needed please)
Thank you so much, and please help.
--DV
dvasavda said:
Hello people,
I recently installed GalaxySense Rom (Search "oozeroo" on Google) for my Samsung Captivate AT&T, and it was working fine, until I changed a few settings, then it said it was going to Hot Boot, so the hot boot worked fine. Then, I turned off my phone and turned it back on, and it does not boot. I tried some stuff (check the Situations). My phone is stuck at "Galaxy S Cyanogen(Mod)" (Picture Included!!!)
Situation:
-No Download Mode
-No recovery mode
-Flashed this rom with rom manager (wiped dalvik cache only)
-TRIED installing Clockworkmod recovery, but wont work (not booting into recovery)
-Only an internal SD inside phone, 14 Gigs.
(Ask me for more info if needed please)
Thank you so much, and please help.
--DV
Click to expand...
Click to collapse
What key combo are you trying for recovery? You have a JIG laying around? If not, I'd go get one regardless of how invincible you think your phone may be. Maybe you could try Adam's one-click unbrick. http://forum.xda-developers.com/showthread.php?t=1153310 I don't know what conditions need to be met for it (your phone) to be recognized, but I'd give it a shot anyway.
I am using:
take out battery, hold both volume buttons, plug in USB, then put in battery, all with both volume buttons held the whole time.
No, I do not have a jig, I want to get one though
-I do not care to erase everything I have, I tried using Odin3 one click downloader, it worked for me once, when my phone actually went download mode
dvasavda said:
I am using:
take out battery, hold both volume buttons, plug in USB, then put in battery, all with both volume buttons held the whole time.
No, I do not have a jig, I want to get one though
-I do not care to erase everything I have, I tried using Odin3 one click downloader, it worked for me once, when my phone actually went download mode
Click to expand...
Click to collapse
remove sim and microsd. You have to have your batt back in before you hold volume+- and insert USB
what recovery key combo you using?
still nothing buddy, tried your technique
thanks dude
i did try returning it, but they didnt accept it (costco), NOT because I had another romm installed... but because it wasnt booting!
-although, I do not have the battery sign show up, it just has the circle, then it goes to galaxy s screen
Twicebak3d said:
What key combo are you trying for recovery? You have a JIG laying around? If not, I'd go get one regardless of how invincible you think your phone may be. Maybe you could try Adam's one-click unbrick. http://forum.xda-developers.com/showthread.php?t=1153310 I don't know what conditions need to be met for it (your phone) to be recognized, but I'd give it a shot anyway.
Click to expand...
Click to collapse
Dont have linux
post as much as you want on this thread, i dont really care
any other ideas?
Well..... has galaxysense been actually ported to the captivate yet? I doubt this'll work but.... try vol down + home + power. You could vary vol down with vol up for recovery mode as well. Like I said.... doubt they'll work.
It has ported to captivate, there is a captivate section on website
Home button? you mean the touchscreen/virtual home button? When do you press it:when it lights up?
-btw, i tried the brick fix thing, but it didnt recognize my phone, because it was only booting
dvasavda said:
It has ported to captivate, there is a captivate section on website
Home button? you mean the touchscreen/virtual home button? When do you press it:when it lights up?
-btw, i tried the brick fix thing, but it didnt recognize my phone, because it was only booting
Click to expand...
Click to collapse
There's a reason I didn't think it'd work lol. Those are i9000 key combos lol. Get a jig imo.
what are the sgh-i897 combos?
can you go into safe mode with this?
and my home button question please?
dvasavda said:
what are the sgh-i897 combos?
can you go into safe mode with this?
and my home button question please?
Click to expand...
Click to collapse
Yeah I meant that virtual key. cappy combos are vol up/down + power for recovery mode for me.
no recovery for me
actually, at first, I had no recovery on my new rom, so... (I dont want to tell you this!) but I looked for a stock recovery, and I put it over the old recovery file in the system.
dvasavda said:
no recovery for me
actually, at first, I had no recovery on my new rom, so... (I dont want to tell you this!) but I looked for a stock recovery, and I put it over the old recovery file in the system.
Click to expand...
Click to collapse
Do you know if you flashed 3 button? try vol up vol down power. hold those while inserting usb
nothing dude yet, i did not flash the 3 button fix, (oops!)
i did notice that, when the phone is booting up, and I connect, the phone is half recognized with computer, and yes I did install drivers.
If i go to device manager, it says Captivate, but with a yellow exclamation mark
have to go to, talk to you tommorow morning!
thanks buddy, i appreciate it!
dvasavda said:
nothing dude yet, i did not flash the 3 button fix, (oops!)
i did notice that, when the phone is booting up, and I connect, the phone is half recognized with computer, and yes I did install drivers.
If i go to device manager, it says Captivate, but with a yellow exclamation mark
Click to expand...
Click to collapse
I wonder if it'd be recognized by ADB if you install Nexus S drivers. try using that as the drivers for the marked captivate in dev manager. http://developer.android.com/sdk/win-usb.html#
If it changes name to Android Composite ADB interface, then you can ADB into recovery and reflash. I don't see how but if you don't have a jig.... might as well try.
(just raised your thanks meter!)
can I cut off an old charger that fits the captivate, and use that?
dvasavda said:
(just raised your thanks meter!)
can I cut off an old charger that fits the captivate, and use that?
Click to expand...
Click to collapse
For a JIG? Possibly. You have to jump pins 4 and 5 with 300k worth of resistors. if you look in my sig, there's also a guide to just making one without a USB. Regardless of how you apply the resistance to your phone, you still need 301k. There is a window. I've seen 294k jigs work, so just as long as resistance is in a certain range across those two pins, it will work.
ok, thanks
I tried adb rebooting, but says error device not found
(same thing happened when my device was working and on)
Hi um I'm pretty new to Android phones, and my Captivate's stuck in a bootloop...
I had CyanogenMod 9 on it, based on ICS 4.0.4, which i still have the .zip for if necessary. But I think I did something stupid... in the recovery (which said something about CWMrecovery) mode, I absent-mindedly formatted the /system directory... derp....
Now basically the phone shows the AT&T logo, then shows some kind of recovery screen, it only flashes up for a short time but I can see in the background both an android, like stock recovery mode, and the logo from ROM manager (or something very similar). There is some text at the bottom but it's very small and only flashes up for a split second so I can't read it... and what's worse, it won't boot into recovery...
I'm not exactly sure how to even do it, but random combinations of the volume & power buttons and home.. screen-area-thing work eventually.. but it's just not working now, as i hold the buttons it either just keeps rebooting before it gets past the AT&T logo or ignoring it completely, showing the recovery screen then rebooting again anyway
Sorry it's kinda long.. I tried to be detailed XD
tl;dr CM9 rom Captivate, formatted /system, stuck in bootloop, recovery mode won't work
Any help would be much appreciated
Edit: Forgot to say, I've searched around already but I haven't found anyone else who's bootloop is caused by formatting /system -.-
re flash the rom. you erased the rom.
dont wipe dont format just flash the rom again. you should be back as if it never happened.
If your in a boot loop you might want to invest in a jig, only $6 on eBay
You also said recovery doesn't work? Have you tried putting it into download mode?
Sent from my SGH-I897 using Tapatalk 2
This might help you:
http://forum.cyanogenmod.com/topic/39685-stuck-on-boot-loop/
If not google Samsung captivate boot loop. Lots of info on how to fix out there. Sorry I don't work on many Samsung phones. Primarily HTC.
Sent from my Inspire 4G using XDA
jig will not help bootloop.
you are freaking out because of the bootloop and not holding the button combo for recovery long enough.
take out the battery. and replace
hold both volume buttons
then hold power
keep buttons held for 5 seconds AFTER screen comes on.
if your phone turns on and starts to boot, you have recovery and download.
TRusselo said:
jig will not help boot loop
Click to expand...
Click to collapse
You sure? Fixed my phone from boot loop!
Sent from my SGH-I897 using Tapatalk 2
TRusselo said:
jig will not help bootloop.
you are freaking out because of the bootloop and not holding the button combo for recovery long enough.
take out the battery. and replace
hold both volume buttons
then hold power
keep buttons held for 5 seconds AFTER screen comes on.
if your phone turns on and starts to boot, you have recovery and download.
Click to expand...
Click to collapse
Tried that, isn't working :\ it just ignores it, shows the recovery screen realy quick then reboots again...
I've had this happen on my captivate...only option is to flash back to a stock ROM and work your way back up to CM9 or whatever you were trying to flash originally. To do this your gonna have to get into download mode. A jiff is your best friend in this situation as suggested by several others. however if the button combo for download mode works for you, that is best. Try unplugging the battery, wait for like 10 seconds and plug back in. Have a PC running, and make sure you have the drivers installed. have the USB cable plugged into your computer, and while holding both the volume buttons down, plug the cable into your phone as well. This should put you into download mode and your good to go.
Sent from my SGH-I897 using XDA
thanks cmilldrummin (and everyone else)
I got my phone into download mode fine... but i don't think I have the drivers :s (googling still, but can't find them so far)
Also I got it into recovery mode earlier, re-flashed the same custom ROM but when I tried to load it it just kept loading with the blue android on a skateboard until the battery ran out (It was the same one, CM9)
Is the like actual android system openable in download mode? so I could re-write the /system folder? if not I guess I'll just try to re-flash a stock rom then upgrade.. *crosses fingers*
Best way is to flash back to stock and start fresh.
Sent from my Serendipity VII flashed Captivate using xda premium
Np Dolei, but yea back to stock is best, gives you a nice clean slate, with no glitches or errors
Sent from my SGH-I897 using XDA
TRusselo is right. The other posts here are taking the sledgehammer approach for a simple fix. If you cannot get into recovery mode - you're doing it wrong, try again. reflash your rom from recovery and all done.
Dolei said:
Hi um I'm pretty new to Android phones, and my Captivate's stuck in a bootloop...
I had CyanogenMod 9 on it, based on ICS 4.0.4, which i still have the .zip for if necessary. But I think I did something stupid... in the recovery (which said something about CWMrecovery) mode, I absent-mindedly formatted the /system directory... derp....
Now basically the phone shows the AT&T logo, then shows some kind of recovery screen, it only flashes up for a short time but I can see in the background both an android, like stock recovery mode, and the logo from ROM manager (or something very similar). There is some text at the bottom but it's very small and only flashes up for a split second so I can't read it... and what's worse, it won't boot into recovery...
I'm not exactly sure how to even do it, but random combinations of the volume & power buttons and home.. screen-area-thing work eventually.. but it's just not working now, as i hold the buttons it either just keeps rebooting before it gets past the AT&T logo or ignoring it completely, showing the recovery screen then rebooting again anyway
Sorry it's kinda long.. I tried to be detailed XD
tl;dr CM9 rom Captivate, formatted /system, stuck in bootloop, recovery mode won't work
Any help would be much appreciated
Edit: Forgot to say, I've searched around already but I haven't found anyone else who's bootloop is caused by formatting /system -.-
Click to expand...
Click to collapse
TRusselo said:
re flash the rom. you erased the rom.
dont wipe dont format just flash the rom again. you should be back as if it never happened.
Click to expand...
Click to collapse
TRusselo said:
jig will not help bootloop.
you are freaking out because of the bootloop and not holding the button combo for recovery long enough.
take out the battery. and replace
hold both volume buttons
then hold power
keep buttons held for 5 seconds AFTER screen comes on.
if your phone turns on and starts to boot, you have recovery and download.
Click to expand...
Click to collapse
Try doing this, this has worked for me since I can't get into recovery with the traditional button combo method of holding all three buttons at the same time.
Turn the phone off. Hold the power button, vol up, vol down. Once the ATT boot screen comes on, let go of the power button. Keep holding the volume buttons and voila, you're in recovery.
Agree. Definitely go back to stock if possible first.
Sent from my Inspire 4G using XDA
Hi Everyone;
I unlocked my phone for flashing custom rom. After unlocking i reebooted it and was normal. Then i flashed cwm via htc one toolkit. It was successfull as well. Then i go to cwm and made factory reset + wipe cache + dalvik cache. Then i go to install zip from sd card but i could not find my rom file. Thought, it was deleted while unlocking device. Then decided to reboot phone again to copy rom file into the phone and reboot.
But, when i rebooted phone from cwm, it stuck on HTC Logo( Quietly Brilliant screen). Waited sometime, but nothing happened. Then i tried to power off it and boot into bootloader or recovery. I press and hold power button but it does not respond anyhow. When i am holding power button ,back and home buttons are blinking but nothing happens. Almost five minutes i waited as holding down power button but phone does not power off anyhow. i tried all methods like vol down + power, vol up + power and both volume keys + power. But really nothing happens, just blinking back and home buttons. That's all.
I can not simply power off device. :crying:
I also tried boot device via fastboot commands but it says "waiting for device" means computer does not recognize device.
Guys, i need an urgent help. Please...
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
skinsfanbdh said:
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
Click to expand...
Click to collapse
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
Click to expand...
Click to collapse
First thank you for your quick reply. Unfortunatelly, power+vol down does not work at all. Maybe i tried 50 times.
Anyhow, after battery die. How can i boot into bootloader. I mean, can phone be charged again in this situation? Also, even if i manage to boot into bootloader or recovery how can i put custom rom file into phone. Actually, i did not use sideload or whatever you mentioned before.
I am serouisly confused now and don't know what to do.
Anyhow, as you said, firlst i need wait to battery die i think. Then i will report back whats happen.
Thank you again btw.
Blue_Shine said:
First thank you for your quick reply. Unfortunatelly, power+vol down does not work at all. Maybe i tried 50 times.
Anyhow, after battery die. How can i boot into bootloader. I mean, can phone be charged again in this situation? Also, even if i manage to boot into bootloader or recovery how can i put custom rom file into phone. Actually, i did not use sideload or whatever you mentioned before.
I am serouisly confused now and don't know what to do.
Anyhow, as you said, firlst i need wait to battery die i think. Then i will report back whats happen.
Thank you again btw.
Click to expand...
Click to collapse
yes your not the first person with this problem. hold power+vol down to get into bootloader. press power button in bootloader to get in fast boot mode. use all in one toolkit to erase cache and side load rom. i recommend all in one toolkit because it automates the process. just select the option then follow on screen steps
Good to hear that i am not the first person That means somehow there is a solution i beleive. Still waiting for battery die. even i had 50 percent battery at the begining but still it holds on I never say again htc battery is bad
I exeprienced that stucking on boot logo several times before with my other htc phones but holding power + vol down/up worked always. This is the first time for me that i faced with power button can not power off device.. Well, ,i hope i wish i can handle out this problem. Definetley with your help.
Regards,
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Deeva said:
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Click to expand...
Click to collapse
Did you read the other posts in this thread? The way you do a "battery pull" on this phone is to HOLD the PWR + VOL DOWN button for ~15seconds. Your capactivie buttons will blink, too. On my device, it took exactly 15seconds to reboot. There have been some reports of some phones that get so stuck that you just have to wait until the battery dies and charge it back up.
Alternatively, if the computer is recongizing it, try to adb reboot recovery to try and get into the recovery.
Deeva said:
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Click to expand...
Click to collapse
no. if it turns on you should be ok. try holdind power+vol down to get into bootloader then try toolkit if it just stays on waiting for device press power button to get into fastboot mode from bootloader
skinsfanbdh said:
yes your not the first person with this problem. hold power+vol down to get into bootloader. press power button in bootloader to get in fast boot mode. use all in one toolkit to erase cache and side load rom. i recommend all in one toolkit because it automates the process. just select the option then follow on screen steps
Click to expand...
Click to collapse
hi again. this morning my battery finally out. Then i put my phone to the charger and started it in fastboot mode( that is a good new) Then i left it for 20-30 minutes to charge a little bit for flashing custom rom.Then i went to recovery and started adb sideload. Sideload was succesful and finally came to aroma installer of trickdroid. I chose my installation options and started to flash rom but process was frozen on 10 percent. It was saying unmount system, unmount cahce and both of them has notification as "already unmounted". But installation was not going on. Then again i tried to go back fasboot mode again by press and holding power+vol down but unfortunatelly lights are blinking but nothing happens again. I think i need to wait to battery die again.
Isn't it quite weird? Why power+vol down combination does not work for me anytime? So, do i need to wait for battery die in every frozen? Do you have any ideas or comments ?
Do i need to go back to stock first ?
EDIT : Battery was out again and i tried once more. This time installation (trick droid) was successful but it frozen at the end this time. And unfortunatelly i can not restart (power+vol down) it again again Holy crap, i am really pissed off with this problem.
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Guide me with steps please
Blue_Shine said:
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Click to expand...
Click to collapse
Hi, I have the same problem now and I let my phone die but when I put it to charge and try to go in bootloader, it's doesn't go and gets stuck at the logo again.
Would you please guide me with the steps how u fixed your phone?
Blue_Shine said:
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Click to expand...
Click to collapse
Do u fix it,i have same problem.on Zenfone max.after successfully rom installation i reboot my phone thn it stuck on resurrection remix logo,then i go into recovery,and mount the stock image without wiping.then twrp showed that image installation successful.thn i reboot it in recovery but it stuck on asus logo.what can i do right now?
Fix it
skinsfanbdh said:
no. if it turns on you should be ok. try holdind power+vol down to get into bootloader then try toolkit if it just stays on waiting for device press power button to get into fastboot mode from bootloader
Click to expand...
Click to collapse
Today i fixed it via asus flash tool.with the right steps it can be flash to stock with no problem
What should I do if I can't even get to the boot screen? I tried holding down the power and volume up buttons, but it just restarts and goes back to the same HTC load screen, what do I do????
so the other day i decided to root my phone it went all well i also installed CWM it also worked. so i also decided to install a custom rom i cant remember the rom since it was download to my phones memory. either way i delete everything cache dalvek etc.. after it installed through recovery menu it said it needed a reboot so i did, but when i rebooted it came to the sony logo. since then its been stuck in the sony logo until it runs out of battery i can't access anything it wont go pass that not even the recovery menu. i don't know what to do. ALSO MY COMPUTER WILL NOT DETECT WHEN I PLUG MY PHONE IN SO I CAN'T USE PCC, Flash tool or seus... any help?
killmehere said:
so the other day i decided to root my phone it went all well i also installed CWM it also worked. so i also decided to install a custom rom i cant remember the rom since it was download to my phones memory. either way i delete everything cache dalvek etc.. after it installed through recovery menu it said it needed a reboot so i did, but when i rebooted it came to the sony logo. since then its been stuck in the sony logo until it runs out of battery i can't access anything it wont go pass that not even the recovery menu. i don't know what to do. ALSO MY COMPUTER WILL NOT DETECT WHEN I PLUG MY PHONE IN SO I CAN'T USE PCC, Flash tool or seus... any help?
Click to expand...
Click to collapse
im sorry to hear this bro .have u tried holding the volume up key plus the power key together wait for it to vibrate once keep holding it an it would vibrate 3 more times and power off ( this should be done while phone is on that stucked sony logo) . after it turn off then try connecting it with fastboot mode and see if that works " hold volume down then plug in usb "
Have you tried flash mode
Sent from my One X using XDA Premium 4 mobile app
it doesnt connect to the pc i cant do anything.
FaiselW said:
Have you tried flash mode
Sent from my One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i let it charge for a little and tried the volume up plus power buttom it vibrated but boot it back to sony screen.
Alex5699 said:
im sorry to hear this bro .have u tried holding the volume up key plus the power key together wait for it to vibrate once keep holding it an it would vibrate 3 more times and power off ( this should be done while phone is on that stucked sony logo) . after it turn off then try connecting it with fastboot mode and see if that works " hold volume down then plug in usb "
Click to expand...
Click to collapse
killmehere said:
it doesnt vibrate when it turns on. also tried what you said but didnt work. THIS CASE IS RARE AND MAYBE CAN HAVE A SOLUTION. JUST NEED TO DIG IN.
Click to expand...
Click to collapse
I think what should be focused on first is getting juice back in that battery. Plug it in to the charger and let it sit for a few hours (like, at least 8 hours). It may boot loop but maybe it will still get some juice? (not sure about this..). Then you can try again to get into Flashmode. (Are you experienced in flashing stock FTF's with flashtool?)
no... i let it charge for a little and tried the volume up plus power buttom it vibrated but boot it back to sony screen.
LaZiODROID said:
I think what should be focused on first is getting juice back in that battery. Plug it in to the charger and let it sit for a few hours (like, at least 8 hours). It may boot loop but maybe it will still get some juice? (not sure about this..). Then you can try again to get into Flashmode. (Are you experienced in flashing stock FTF's with flashtool?)
Click to expand...
Click to collapse
By turning it on with VolUp+Power, what were you expecting to happen?
i am not sure. when i tried connecting it. it connects for 5 secs then disconnects.
LaZiODROID said:
By turning it on with VolUp+Power, what were you expecting to happen?
Click to expand...
Click to collapse
Alex5699 said:
im sorry to hear this bro .have u tried holding the volume up key plus the power key together wait for it to vibrate once keep holding it an it would vibrate 3 more times and power off ( this should be done while phone is on that stucked sony logo) . after it turn off then try connecting it with fastboot mode and see if that works " hold volume down then plug in usb "
Click to expand...
Click to collapse
AT FIRST IT didn't work now it did thanks. how do i put it as solved?
killmehere said:
AT FIRST IT didn't work now it did thanks. how do i put it as solved?
Click to expand...
Click to collapse
Go to the original post in this thread and click the Edit Post button. Then near the Save button should be a "Go Advanced" button. You can edit the thread title in there. Glad to hear it worked out for you.
killmehere said:
AT FIRST IT didn't work now it did thanks. how do i put it as solved?
Click to expand...
Click to collapse
sure, the very first post u made with your initial question, When you press edit, press on "go advanced and then u can change it up from there :good: