Hello.I am having a problem.I have v20a oficiall rooted (v20a 262.100).I want to unlock my bootloader and i want to go to a euro open version to do so.I am using kdz to upgrade but no luck....it reboots to my version...I have stuck.....:silly:
emplokeas said:
Hello.I am having a problem.I have v20a oficiall rooted (v20a 262.100).I want to unlock my bootloader and i want to go to a euro open version to do so.I am using kdz to upgrade but no luck....it reboots to my version...I have stuck.....:silly:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
RuedasLocas said:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
Click to expand...
Click to collapse
yes i know i can downgrade,but i was looking on anu other way,to avoid that....
emplokeas said:
yes i know i can downgrade,but i was looking on anu other way,to avoid that....
Click to expand...
Click to collapse
Thats not to downgrade. its to try it with a clean install.
LGFlash Tool will wipe everything, create needed partitions and will format others, in the end will command a factory reset soo... when
your phone reboot after flash, you'll see the Android preparing for "first" boot.
If you can't get an euro_open with that method, forget about it.
Be euro_open or not, depends on your device region.
Related
hello guys. my rom build numbers 10.3.1.a.244 rooted and i want to flash 10.3.A.0.423. is there any problem for flash it?
human.n74 said:
hello guys. my rom build numbers 10.3.1.a.244 rooted and i want to flash 10.3.A.0.423. is there any problem for flash it?
Click to expand...
Click to collapse
Why you wanna downgrade?
Anyway, before any downgrade process, be sure to wipe all data.
If you don't wipe data you will have problems with nfc firmware causing in a bootloop
Sent from my Xperia Z using XDA Premium 4 mobile app.
DrKrFfXx said:
Why you wanna downgrade?
Anyway, before any downgrade process, be sure to wipe all data.
Click to expand...
Click to collapse
If i want to di it i must wipe with flashtools or cmw?
human.n74 said:
If i want to di it i must wipe with flashtools or cmw?
Click to expand...
Click to collapse
Either way is fine.
DrKrFfXx said:
Either way is fine.
Click to expand...
Click to collapse
if i unlock boot loader can i re lock it easily?
human.n74 said:
if i unlock boot loader can i re lock it easily?
Click to expand...
Click to collapse
Yes, there is a flashable zip to unlock the bootloader somewhere in the development section.
DrKrFfXx said:
Yes, there is a flashable zip to unlock the bootloader somewhere in the development section.
Click to expand...
Click to collapse
relock is easy too? after flash official rom my devise in no root right?
human.n74 said:
relock is easy too? after flash official rom my devise in no root right?
Click to expand...
Click to collapse
Yes. Easy.
Nope, no root.
Hello folks,
Recently I rooted my phone succefully (Moto e4 plus X1770 Nicklaus),then after a reset my phone started booting into twrp only.
When I try to flash stock ROM via SP flash it boots up on USB connect. Now I want to use fastboot flash method to go back to stock but I don't know how to do it
Can anyone please tell me how to flash stock ROM via fastboot method thank you in advance
TechnoTemplar said:
Hello folks,
Recently I rooted my phone succefully (Moto e4 plus X1770 Nicklaus),then after a reset my phone started booting into twrp only.
When I try to flash stock ROM via SP flash it boots up on USB connect. Now I want to use fastboot flash method to go back to stock but I don't know how to do it
Can anyone please tell me how to flash stock ROM via fastboot method thank you in advance
Click to expand...
Click to collapse
Have u installed vcom drivers??
smart123123 said:
Have u installed vcom drivers??
Click to expand...
Click to collapse
Thanks for the help. I managed to flash the stock ROM in fastboot using the flash-all script
TechnoTemplar said:
Thanks for the help. I managed to flash the stock ROM in fastboot using the flash-all script
Click to expand...
Click to collapse
Ok... So are u able to udate it now... Or it is showing uptodate?? Ajd are u having device unlocked status??
smart123123 said:
Ok... So are u able to udate it now... Or it is showing uptodate?? Ajd are u having device unlocked status??
Click to expand...
Click to collapse
The bootloader is unlocked and I'm not receiving any updates
TechnoTemplar said:
The bootloader is unlocked and I'm not receiving any updates
Click to expand...
Click to collapse
Just after the flash... Did u received any update??
smart123123 said:
Just after the flash... Did u received any update??
Click to expand...
Click to collapse
No I don't received any update after the flash.
TechnoTemplar said:
No I don't received any update after the flash.
Click to expand...
Click to collapse
Yea... Thats the thing... For volte we need update but that we can't receive after unlocking... Is there any way to do this??
smart123123 said:
Yea... Thats the thing... For volte we need update but that we can't receive after unlocking... Is there any way to do this??
Click to expand...
Click to collapse
Yup There are two methods..
One Search for the latest stock rom and flash it secoundly if you don't find the latest stock rom lock the bootloader. I prefer to use bootloader lock method.:highfive:
TechnoTemplar said:
Yup There are two methods..
One Search for the latest stock rom and flash it secoundly if you don't find the latest stock rom lock the bootloader. I prefer to use bootloader lock method.:highfive:
Click to expand...
Click to collapse
Like using... Fastboot oem lock or something else... Nd are we able to receive update after that??
TechnoTemplar said:
Thanks for the help. I managed to flash the stock ROM in fastboot using the flash-all script
Click to expand...
Click to collapse
Hi... i dont speak english so...anyway i need help i have a moto e4 plus XT1773 nicklaus and the stock firmware i downloaded doesnt have the flash all command so i cant flash it, its there another way to flash the rom via fastboot? SP doesnt detect my phone
u can roll back on stock with this tool, my phone was rooted and it was unlocked. link for tool: Here
Help: Same problem
TechnoTemplar said:
Yup There are two methods..
One Search for the latest stock rom and flash it secoundly if you don't find the latest stock rom lock the bootloader. I prefer to use bootloader lock method.:highfive:
Click to expand...
Click to collapse
Hi Techno,
How exactly did you do it? it's been so long since i used to play with rooting phones. and i found one phone that made me wanna root. Moto E4 plus. after all the steps, now am stucked to TWRP. i tried to flash magisk but still goes back to twrp.
TWRP: twrp-3.2.3-0-nicklaus
instead of: twrp-3.2.3-1-nicklaus, issue file too large
i'm not trying to revert back to original, im still pushing to root the phone. but, im stucked.
what could i possibly have done wrong?
Thanks in advance!
I flashed the wrong firmware so that my phone can not use LTE now.
I mistakenly brushed into the ROM of the ROG phone I.
The result is WIFI works except LTE network.
I tryied flash any new ROMs.
Someone tell me that he can see the Baseband ID in 9008 mode.
So, any big boss can help me how can I find back my baseband?
princezcq said:
I flashed the wrong firmware so that my phone can not use LTE now.
I mistakenly brushed into the ROM of the ROG phone I.
The result is WIFI works except LTE network.
I tryied flash any new ROMs.
Someone tell me that he can see the Baseband ID in 9008 mode.
So, any big boss can help me how can I find back my baseband?
Click to expand...
Click to collapse
I think you need to flash raw rom again. Use the raw from this guide...
https://forum.xda-developers.com/rog-phone-2/how-to/guide-to-check-change-fingerprint-cn-to-t4002279
reg66 said:
I think you need to flash raw rom again. Use the raw from this guide...
https://forum.xda-developers.com/rog-phone-2/how-to/guide-to-check-change-fingerprint-cn-to-t4002279
Click to expand...
Click to collapse
Hi what does raw rom mean?
reg66 said:
I think you need to flash raw rom again. Use the raw from this guide...
https://forum.xda-developers.com/rog-phone-2/how-to/guide-to-check-change-fingerprint-cn-to-t4002279
Click to expand...
Click to collapse
I viewed the page, but unfortunately I can't relock my bootloader. (When relock the bootloader I can't unlock it because the baseband lost)
So that's the problem which I need find back my baseband.
princezcq said:
I viewed the page, but unfortunately I can't relock my bootloader. (When relock the bootloader I can't unlock it because the baseband lost)
So that's the problem which I need find back my baseband.
Click to expand...
Click to collapse
You could always just stay with unlocked bootloader like I do, I keep root as well, so you can ignore the last part, they are only optional extras if you don't want to keep root etc..
reg66 said:
You could always just stay with unlocked bootloader like I do, I keep root as well, so you can ignore the last part, they are only optional extras if you don't want to keep root etc..
Click to expand...
Click to collapse
Ok, I will follow the step try it.
Thanks man.
reg66 said:
I think you need to flash raw rom again. Use the raw from this guide...
https://forum.xda-developers.com/rog-phone-2/how-to/guide-to-check-change-fingerprint-cn-to-t4002279
Click to expand...
Click to collapse
Hi reg66,I tried this raw but nothing change. Still can not read the base band and the model ID.
Any other suggestion?
Hi, I've tryed to install realme UI 2.0, but during the installation i have an error and the update arrested ,i never unlock the bootloader and my versione Is C.38, can anyone help me?
Did you succeed?
If not,
How did you try to install RUI 2.0?
Have you ever tried to format your phone through the recovery mode?
Kydaix said:
Did you succeed?
If not,
How did you try to install RUI 2.0?
Have you ever tried to format your phone through the recovery mode?
Click to expand...
Click to collapse
Nope, I'm still in c38
I tryed in recovery and on file explorer
Yes, wipe all data
But, you didn't get the update in the settings?
If no, wait for it.
If yes,
Ok so, even after that, it still doesn't want to do the update?
Then, you should try that: Realme flash Guide (If you haven't already), then update! (need to unlock bootloader first)
Kydaix said:
But, you didn't get the update in the settings?
If no, wait for it.
If yes,
Ok so, even after that, it still doesn't want to do the update?
Then, you should try that: Realme flash Guide (If you haven't already), then update! (need to unlock bootloader first)
Click to expand...
Click to collapse
Nope , however many people have updated so and then it worked, I do not know what my problem is ...
I know that before upgrading it is better to keep the bootloader locked
antonio96ct said:
Nope , however many people have updated so and then it worked, I do not know what my problem is ...
I know that before upgrading it is better to keep the bootloader locked
Click to expand...
Click to collapse
Personally, I haven't had any problems even though I have an unlocked bootloader since I got my smartphone.
I think you should just wait in this case to avoid problems. ^^
Is it possible to switch from ne2211 to ne2213
Using Oxygen updater with advanced mode
Yes!
Just download the NE2213 image from oxygen updater and using the OPLocalUpgrade.apk flash it.
zopostyle said:
Yes!
Just download the NE2213 image from oxygen updater and using the OPLocalUpgrade.apk flash it.
Click to expand...
Click to collapse
I install magisk app in my phone and install safety net module
I want to remove it and relock bootloader
After installing the new ROM or before
Can you help me in it
Abdelrahman_morshed said:
I install magisk app in my phone and install safety net module
I want to remove it and relock bootloader
After installing the new ROM or before
Can you help me in it
Click to expand...
Click to collapse
I would not relock the bootloader, there is no reason to.
Then just flash a full image.
zopostyle said:
I would not relock the bootloader, there is no reason to.
Then just flash a full image.
Click to expand...
Click to collapse
The reason to relock bootloader is many bank application doesn't work as see my phone is rooted due to bootloader unlocked
Abdelrahman_morshed said:
The reason to relock bootloader is many bank application doesn't work as see my phone is rooted due to bootloader unlocked
Click to expand...
Click to collapse
The problem is not the bootloader unlocked. Its the root.
Mine is unlocked and I can do anything..
Anyways, if you really wat to relock, You need to do it after flash the new image, otherwise if something goes wrong you'll brick your device.
zopostyle said:
The problem is not the bootloader unlocked. Its the root.
Mine is unlocked and I can do anything..
Click to expand...
Click to collapse
It's say application doesn't work on rooted phone
And this was before installing magisk app or root
Just after flashing the ROM
May be the rom is not stock rom
So where I can find a stock ROM to flash it ?
Abdelrahman_morshed said:
It's say application doesn't work on rooted phone
And this was before installing magisk app or root
Just after flashing the ROM
May be the rom is not stock rom
So where I can find a stock ROM to flash it ?
Click to expand...
Click to collapse
In oxygen updater, there you can find links to flash the full image.
Maybe you need to flash it using: https://oxygenos.oneplus.net/OPLocalUpdate_For_Android13.apk
zopostyle said:
In oxygen updater, there you can find links to flash the full image.
Maybe you need to flash it using: https://oxygenos.oneplus.net/OPLocalUpdate_For_Android13.apk
Click to expand...
Click to collapse
Thanks for your help
But Oxygen updater give me the same Indian ROM and I want to change to global ROM
Download this package: https://oxygenos.oneplus.net/2354_sign_NE2213_11_A_OTA_0120_all_9f570f_01000100.zip
And apply it using this apk https://oxygenos.oneplus.net/OPLocalUpdate_For_Android13.apk
Source: https://oxygenupdater.com/article/346/
zopostyle said:
Download this package: https://oxygenos.oneplus.net/2354_sign_NE2213_11_A_OTA_0120_all_9f570f_01000100.zip
And apply it using this apk https://oxygenos.oneplus.net/OPLocalUpdate_For_Android13.apk
Source: https://oxygenupdater.com/article/346/
Click to expand...
Click to collapse
Thank you very much for your help
IAM grateful
If I install this ROM I will receive updates normally or I must download it manually
Yes, it will work as it it's original.
oficial updates and so on.
zopostyle said:
Yes, it will work as it it's original.
oficial updates and so on.
Click to expand...
Click to collapse
Thank you very much
Do you need to Reset phone when crossing from NE2215 to NE2213? Or will transit/update without the need to factory reset?
wmfreakrom said:
Do you need to Reset phone when crossing from NE2215 to NE2213? Or will transit/update without the need to factory reset?
Click to expand...
Click to collapse
It should be needed to factory reset during the process.
Has anyone done it and can give some certain feedback? Thanks
I’m using the updater on an NE2211 and downloading the NE2215 full package, but when I go to local install, it says verification failed. I tried to download the local updater Apk, but it saves as a .ZIP and asks me to extract 1,200 files. Don’t think that’s right, but I don’t know.
SwissNix said:
I’m using the updater on an NE2211 and downloading the NE2215 full package, but when I go to local install, it says verification failed. I tried to download the local updater Apk, but it saves as a .ZIP and asks me to extract 1,200 files. Don’t think that’s right, but I don’t know.
Click to expand...
Click to collapse
Disregard.
Abdelrahman_morshed said:
The reason to relock bootloader is many bank application doesn't work as see my phone is rooted due to bootloader unlocked
Click to expand...
Click to collapse
You should never relock bootloader if any non-stock is installed. This will surely brick the device.
If you restore EVERYTHING back to stock (recovery, ROM, etc.), then you can relock the bootloader.