Hey guys, I've had my HTC one for a week now and loving it, and decided to install the TrickDroid ROM, which I equally think is amazing (and may even deter me from the need to flash any AOSP based future ROMS), however after flashing the AOSP lockscreen whenever I receive a phone call, I have to unlock first!
Is there anything that can be done about this as it's my only gripe with the ROM.
Cheers!
Bump.
I also do not like the lockscreen. I tried installing using the HTClockscreen.apk from the ROM but it won't let me do it. I want the stock lock screen back. Yes, I agreed about doing two steps just to answer a phone. Unlock, then press answer. Please help.
---------- Post added at 10:00 AM ---------- Previous post was at 09:45 AM ----------
I also try to change the lock in "setting, personalize" and still doesn't change anything. Still have the ring unlock style lock screen.
Same here!!
chillingrsx said:
Bump.
I also do not like the lockscreen. I tried installing using the HTClockscreen.apk from the ROM but it won't let me do it. I want the stock lock screen back. Yes, I agreed about doing two steps just to answer a phone. Unlock, then press answer. Please help.
Click to expand...
Click to collapse
I'm also having the same issue with Trickdroid v5.5.1. Incoming calls don't display unless you unlock the screen. When additional security is enabled (e.g. PIN unlock), you need to then unlock and enter the PIN before a call can be taken! Love AOSP lockscreen, but this is V.annoying!
chillingrsx said:
Bump.
I also do not like the lockscreen. I tried installing using the HTClockscreen.apk from the ROM but it won't let me do it. I want the stock lock screen back. Yes, I agreed about doing two steps just to answer a phone. Unlock, then press answer. Please help.
---------- Post added at 10:00 AM ---------- Previous post was at 09:45 AM ----------
I also try to change the lock in "setting, personalize" and still doesn't change anything. Still have the ring unlock style lock screen.
Click to expand...
Click to collapse
You have to re flash the rom and change the setting back to stock via aroma.
laraiza said:
You have to re flash the rom and change the setting back to stock via aroma.
Click to expand...
Click to collapse
Can you explain where in Aroma do I change this setting? Is it via the tweak flash?
chillingrsx said:
Can you explain where in Aroma do I change this setting? Is it via the tweak flash?
Click to expand...
Click to collapse
It's one of the first couple options available I believe. It asks if you want the aosp lockscreen or htc lockscreen. Choose htc.
Do I have to set up everything again when I re-flash it or does it stay the same? Apps etc.?
Related
I am using the Android Revolution HD rom
and in my lockscreen i can unlock with pulling up the time, pulling the lock icon
and just swiping the finger anywhere in the screen which is really annoying because the phone unlock it self in my pocket and doing many sort of things by itself .
some one know about this bug? or how to fix it?.
tx
This is a feature
exocetdj said:
This is a feature
Click to expand...
Click to collapse
so i guess there isn't any way to cancel it.
I will need to install a stock rom i tired of all the roms our there
ori.amuday said:
so i guess there isn't any way to cancel it.
I will need to install a stock rom i tired of all the roms our there
Click to expand...
Click to collapse
Or put a password on your phone
Sent from my iPad using Tapatalk
ori.amuday said:
so i guess there isn't any way to cancel it.
I will need to install a stock rom i tired of all the roms our there
Click to expand...
Click to collapse
Feature in any sense Rom buddy I'm on skydragon (great Rom btw ) and it does it. U could use a passcode as suggested above
I have read another post hosting a similar question to mine, but i have not found an answer.
When I go into the Personalize setting of my phone and try to set a new lock screen. It does not show up. The phone will say that the image has been successfully applied but then when I lock my screen to check. It does not show up.
There is a custom ROM by bananacakes called "HOLICS" that has fixed this issue. But i am using a ROM that has fixed the instagram issue I also have. Is there a way to figure out how the issue was fixed in that ROM and use it in stock ROMs?
mirai325 said:
I have read another post hosting a similar question to mine, but i have not found an answer.
When I go into the Personalize setting of my phone and try to set a new lock screen. It does not show up. The phone will say that the image has been successfully applied but then when I lock my screen to check. It does not show up.
There is a custom ROM by bananacakes called "HOLICS" that has fixed this issue. But i am using a ROM that has fixed the instagram issue I also have. Is there a way to figure out how the issue was fixed in that ROM and use it in stock ROMs?
Click to expand...
Click to collapse
I'm not sure... However... Bananacakes is a smali editor...
So... Good luck
Sent from my Vivid 4G using Tapatalk
Found it in the S6 unified development thread here: (hope the link goes through)
http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
From stock, rooted (pingpong) rom applied rom and add-on files with flashfire. They use an aroma installer which causes a lot of screen flicker (for me at least), but it's not impossible to get through it. You will see some black screens and extended reboot first time so be patient.
YMMV, but it's running great for me.
UPDATE: flashed at least 6 times over the weekend (rom and add-ons, so does that count as 12?). Had one hiccup where it appeared to hang on exiting the aroma installer for reboot. Gave the phone the 3 finger salute (vup, vdown, power) and it rebooted to continue the install. No knox trip and is as safe as flashing anything else under flashfire.
Thank you for the share and taking the risk...
God Mode works with ATT also.
Sent from my SAMSUNG-SM-G920AZ
Does it trip Knox?
bryantx24 said:
Does it trip Knox?
Click to expand...
Click to collapse
Not God as far as I know because with ATT you have to flash with flashfire.
Sent from my SM-N910W8
Oops. GPS is broken on v1.5. Wait for next update from author.
papashex said:
Oops. GPS is broken on v1.5. Wait for next update from author.
Click to expand...
Click to collapse
Is that something you could fix yourself, If seen videos about changing stuff if GPS isnt working? Or is it something broken in the ROM
Basically makes your ATT S6 International!
Here's what it adds
Original Settings
Download Booster
More fluid
More available RAM (In my experience)
Here's what it takes away
Wallpapers
Fingerprint Support
Themes
Many Stock Apps
Fellow ATT Users, ask away if you want to know anything about this ROM!
I believe it's in the rom. The rom creator has it slated for fix in next release.
One ATT user in the original post claims to have no problem, where most others do (myself included). This user also accidently flashed some other rom(s). He's not clear about clean / dirty flashing or wipes. I'll just wait for v1.6 to see how it goes.
There is a flashable add-on pack to restore the removed items noted by NizzleFish98.
NizzleFish98 said:
Here's what it adds
Original Settings
Download Booster
More fluid
More available RAM (In my experience)
Here's what it takes away
Wallpapers
Fingerprint Support
Themes
Many Stock Apps
Fellow ATT Users, ask away if you want to know anything about this ROM!
Click to expand...
Click to collapse
Does it still have "my files" app? I like the way it is for non root stuff
It looks like you can add some of the stuff back with aroma, if im reading right.
Does it have the extra camera downloads or can you at least add them.
Fingerprint I could live with out
I like with alliance you seem to be able to modify lots of stuff.'
Does tether work and "OK Google" (I had problems with" OK Google" after installing tethering zip"
Currently downloading files and backing up now.
do I just wipe and flash using flash fire like I did with clean ROM
Running clean ROM right now
Thank for the Input
---------- Post added at 08:39 PM ---------- Previous post was at 08:22 PM ----------
Do I just flash the aroma add on package with flashfire?
I had the same hiccup flashing the aroma add on
JHarley17 said:
Does it still have "my files" app? I like the way it is for non root stuff
It looks like you can add some of the stuff back with aroma, if im reading right.
Does it have the extra camera downloads or can you at least add them.
Fingerprint I could live with out
I like with alliance you seem to be able to modify lots of stuff.'
Does tether work and "OK Google" (I had problems with" OK Google" after installing tethering zip"
Currently downloading files and backing up now.
do I just wipe and flash using flash fire like I did with clean ROM
Running clean ROM right now
Thank for the Input
---------- Post added at 08:39 PM ---------- Previous post was at 08:22 PM ----------
Do I just flash the aroma add on package with flashfire?
Click to expand...
Click to collapse
Not too sure about the addons as I have no need for them but yes everything is used with FlashFire. Just wipe and select zip and boom, you'll be sent to a setup mode that can be a little tricky but not too hard. If you figure out the addons, let me know how they go. Cheers!
JHarley17 said:
Does it still have "my files" app? I like the way it is for non root stuff
It looks like you can add some of the stuff back with aroma, if im reading right.
Does it have the extra camera downloads or can you at least add them.
Fingerprint I could live with out
I like with alliance you seem to be able to modify lots of stuff.'
Does tether work and "OK Google" (I had problems with" OK Google" after installing tethering zip"
Currently downloading files and backing up now.
do I just wipe and flash using flash fire like I did with clean ROM
Running clean ROM right now
Thank for the Input
---------- Post added at 08:39 PM ---------- Previous post was at 08:22 PM ----------
Do I just flash the aroma add on package with flashfire?
Click to expand...
Click to collapse
You flash the stripped down rom (500mb or so) let it boot up then use flashfire again with the 800mbish add-on zip and just pick whatever you want back ,like peel rmote control app or w/e you want. It's super easy.
---------- Post added at 12:47 AM ---------- Previous post was at 12:46 AM ----------
papashex said:
Oops. GPS is broken on v1.5. Wait for next update from author.
Click to expand...
Click to collapse
That's weird, it works fine for me and I'm running 1.5. Bizaro world for sure.
Went from Dennis' Rom did full wipe (except internal storage) and flashed the ROM only. All worked perfectly. I then went and flashed the aroma zip after all my apps from google were restored.
maps/gps, incall audio, and fingerprint scanner all 100%
Thanks!
MrGimpGrumble said:
Went from Dennis' Rom did full wipe (except internal storage) and flashed the ROM only. All worked perfectly. I then went and flashed the aroma zip after all my apps from google were restored.
maps/gps, incall audio, and fingerprint scanner all 100%
Thanks!
Click to expand...
Click to collapse
Are you sure GPS works as it should? Could you install GPS TEST from playstore and confirm that multiple satellites are locking on. I have installed three times today and I get some partial GPS function, if you consider one or two streets over acceptable.
Also can you forward calls in your phone settings?
yeah gps is not working for me! clean odin install and everything.
Having a bunch of FC's after the Addon package. Any ideas what's going on?
Work great con my att galaxy s6
GPS broken here as well .. But wow ... This is by far the best ROM ive used in a while. I did use the add-on package as well.
acardinale said:
GPS broken here as well .. But wow ... This is by far the best ROM ive used in a while. I did use the add-on package as well.
Click to expand...
Click to collapse
Beat rom you've used but a main feature like GPS is broken? Hmmm.
Sent from my SAMSUNG-SM-G920A using Tapatalk
About MIUI 7
http://en.miui.com/
Features
OTA incremental updates every week
Original Samsung feature:multiwindow,camera,Power Saving Mode,S Pen,Fast charging,etc
Support Variants
N910F/N910P/N9108V/N910V
If you need more note4 snapdragon variants,please tell me!
Changelog
Temporarily empty
Instructions for Using
1. Download the ROM.
2. Copy the file to your internal or external SD Card
3. Reboot into recovery and wipe data,cache and dalvik cache
4. Install the ROM
5. Reboot your phone & enjoy it!
Download Link
http://miuirom.xiaomi.com/rom/u2699462/5.11.3/miui_n9108v_rainbow_5.11.3_32125b01ef_4.4.zip
GAPPS :http://opengapps.org/?api=4.4&variant=nano
If you like my work,please press Thanks button and rate ROM with 5 stars.
THX!
XDA:DevDB Information
MIUI7 for Samsung Galaxy Note4, ROM for the Verizon Samsung Galaxy Note 4
Contributors
bxfxf, bxfxf
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.0/4.4 Baseband & Bootloader
Based On: Samsung Stock Firmware
Version Information
Status: Stable
Current Stable Version: 5.11.3
Stable Release Date: 2015-11-03
Created 2015-11-04
Last Updated 2015-11-04
Awesome! It's good to see a new ROM over here. Thank you!
Is this basically the same build that gtbluesky posted or are there changes that he hasn't posted?
Which gapps are we supposed to use?
jbombs16 said:
Which gapps are we supposed to use?
Click to expand...
Click to collapse
He already has the right gapps selected when you click the link in the description. So you just click that link and click download. I wouldn't flash just yet though. I can't figure out how to get the rom in English.
@bxfxf The Rom flashed okay and everything but I don't see an option for English. Everything is in Chinese. Can you tell us how to change it?
jal3223 said:
He already has the right gapps selected when you click the link in the description. So you just click that link and click download. I wouldn't flash just yet though. I can't figure out how to get the rom in English.
@bxfxf The Rom flashed okay and everything but I don't see an option for English. Everything is in Chinese. Can you tell us how to change it?
Click to expand...
Click to collapse
Odd. when i first flashed it i saw the MI logo with Chinese characters at the bottom and a progress bar. however when the bar progressed fully the next screen was a language selection screen that allowed me to select English right away. im not using it as my main at the moment, dual booting it, so i can get through work today fine but when i get home later in the day ill wipe it and see if i get the same option or if its all in chinese.
Blackiisky said:
Odd. when i first flashed it i saw the MI logo with Chinese characters at the bottom and a progress bar. however when the bar progressed fully the next screen was a language selection screen that allowed me to select English right away. im not using it as my main at the moment, dual booting it, so i can get through work today fine but when i get home later in the day ill wipe it and see if i get the same option or if its all in chinese.
Click to expand...
Click to collapse
I'll give it a try again to make sure. Maybe I clicked past it by mistake.
---------- Post added at 05:15 PM ---------- Previous post was at 04:38 PM ----------
Blackiisky said:
Odd. when i first flashed it i saw the MI logo with Chinese characters at the bottom and a progress bar. however when the bar progressed fully the next screen was a language selection screen that allowed me to select English right away. im not using it as my main at the moment, dual booting it, so i can get through work today fine but when i get home later in the day ill wipe it and see if i get the same option or if its all in chinese.
Click to expand...
Click to collapse
I figured out the problem. For some reason when I use the gapps in the op it skips past the setup screen. I tried it two separate times with a clean wipe. I then tried it without flashing gapps and I was able to go through setup allowing me to choose English. It's strange, I didn't know gapps could cause this behavior.
jal3223 said:
I'll give it a try again to make sure. Maybe I clicked past it by mistake.
---------- Post added at 05:15 PM ---------- Previous post was at 04:38 PM ----------
I figured out the problem. For some reason when I use the gapps in the op it skips past the setup screen. I tried it two separate times with a clean wipe. I then tried it without flashing gapps and I was able to go through setup allowing me to choose English. It's strange, I didn't know gapps could cause this behavior.
Click to expand...
Click to collapse
Ahh okay, that makes a lot of sense now.. I skipped gapps because I had the wrong package. Perhaps when I get home later I can look how to change the language when in the os and give you some instructions
jal3223 said:
I'll give it a try again to make sure. Maybe I clicked past it by mistake.
---------- Post added at 05:15 PM ---------- Previous post was at 04:38 PM ----------
I figured out the problem. For some reason when I use the gapps in the op it skips past the setup screen. I tried it two separate times with a clean wipe. I then tried it without flashing gapps and I was able to go through setup allowing me to choose English. It's strange, I didn't know gapps could cause this behavior.
Click to expand...
Click to collapse
i was going to post an elaborate array of screen shots of where to click to get to the language settings when i had an idea. Flash the rom.. set it up.. then flash gapps.. (sorry if you already figured this out and im just stating the obvious but after taking all the screenshots i was happy when the easier way struck me.)
Anyone know why this ROM is based on KK and not LP?
Blackiisky said:
i was going to post an elaborate array of screen shots of where to click to get to the language settings when i had an idea. Flash the rom.. set it up.. then flash gapps.. (sorry if you already figured this out and im just stating the obvious but after taking all the screenshots i was happy when the easier way struck me.)
Click to expand...
Click to collapse
I appreciate you putting all the effort into helping us get this figured out. Yeah, I believe the last way you mentioned will be the way to go. Thank you.
Blackiisky said:
i was going to post an elaborate array of screen shots of where to click to get to the language settings when i had an idea. Flash the rom.. set it up.. then flash gapps.. (sorry if you already figured this out and im just stating the obvious but after taking all the screenshots i was happy when the easier way struck me.)
Click to expand...
Click to collapse
Have you had any data troubles? Is there anything you have to do other than selecting LTE?
jal3223 said:
Have you had any data troubles? Is there anything you have to do other than selecting LTE?
Click to expand...
Click to collapse
Yeah, I've had no luck getting data to work.
On a side note being that I never used a miui ROM before I was really excited to see a custom ROM that retains all the spen features (and other touchwiz features) as well as the stock camera from touchwiz. I don't necessarily love the iOS look of miui but I don't hate it either; I just enjoy trying new things when I feel my phone is getting stale.
Blackiisky said:
Yeah, I've had no luck getting data to work.
On a side note being that I never used a miui ROM before I was really excited to see a custom ROM that retains all the spen features (and other touchwiz features) as well as the stock camera from touchwiz. I don't necessarily love the iOS look of miui but I don't hate it either; I just enjoy trying new things when I feel my phone is getting stale.
Click to expand...
Click to collapse
Same here. I'm with you though, it's always awesome to have something new to flash. I'm really excited about a Note 5 port or an updated AOSP but MIUI has a cool vibe to it. There's even a 1080p mode that's pretty interesting in the settings that seems to iron out all graphical issues that most have when altering resolution. Just something to tinker with.
There is another MIUI created by another guy that apparently has data and everything in the snapdragon Note 4 section. I accidentally downloaded the wrong version the other day so I haven't been able to try it (the download took forever for some reason). I'll let you know if it turns out usable.
This is a beautifull rom. I love it.
But why am i not able to get Data. It says i have 4G LTE connection. it has enabled the mobile data. I just can't seem to get it to work. and as posted by others, they can't get Data either.
The only thing i am able to think of is that the APN settings need to be fixed.
My APN list is empty. If i add the correct listing, it disapears. if i add one that is incorrect it stays. When Restore Default APN, it blanks out the settings. when going into the actual file that holds these settings, it looks full. It appears that the list is there., it just won't get recognized by the system. I am pretty new at this, so could someone please help. it looks as though this thread is not being maintained, but hopefully we can get some help here.
Working Data
I finally got Data to work on MIUI7
MIUI Version: 7 5.11.3 | Beta
I had to add the correct APN information. and the APN information that Verizon gives, or that i could find anywhere online was not what i needed. I got the information from an app i downloaded.
everything was normal for APN settings except i had to add:
APN Type: default,hipri,internet,mms
The hipri threw me for a loop, but after that, it started working.
Can anyone else try this and see if they get data back or if there was something else I did in conjunction with this to get data?
I'm happy to give this a spin later today and see if I can get data working with your method. Does everything else work in this build?
Yes this data fix works!
Please forgive my desperate lunge towards any sliver of hope of diversity on the Note 4.
I don't see any disclaimers that say you need dev edition. Are you able to flash MIUI with basic US Verizon Galaxy Note 4? Can you flash MIUI without root? Again, please forgive me, these feels impossible as I type, but I'm desperate for anything on this failed phone.
Thank you.
snapz54 said:
Please forgive my desperate lunge towards any sliver of hope of diversity on the Note 4.
I don't see any disclaimers that say you need dev edition. Are you able to flash MIUI with basic US Verizon Galaxy Note 4? Can you flash MIUI without root? Again, please forgive me, these feels impossible as I type, but I'm desperate for anything on this failed phone.
Thank you.
Click to expand...
Click to collapse
This is for Dev edition only, you will need root for custom recovery and an unlocked bootloader. This is not for retails edition.
Sent from my SM-P600 using Tapatalk
fingerprint scanner work?
Face Unlock for Mate 9 Oreo
(Honor 8 Pro EMUI8 is confirmed too)
Download and flash in TWRP: https://mega.nz/#!FfxihZqD!vjF2rz0elfiay_ZYeQWwLfVG9lNI7FYAyi2vaohaiEs
Magisk module: https://mega.nz/#!1Xp0DbaC!fJvieuQWjbAauylqCvngHoM3wLPChTTCgPdO0yy0UC8
If anyone good at making modules looks at it, please find a proper way of doing it. Right now I only symlink files to /product and /odm. The symlinks in /odm stays after uninstall. Best would be to actually auto mount (like /system and /vendor is) it but I think magisk needs to be edited for that (?)
Also, check if you have /odm available in your TWRP version, else install this one:
TWRP 3.2.1: https://mega.nz/#!AP5DRA4Q!i02i8cCi_UWoF2XZl5gjLb5ESpeilpR_OD0MHSh6Ezg
To "enrol" (lol) face after installing, go to Settings -> Security & Privacy -> Face unlock
Face unlock is actually available already in Mate 9 from the start, it just needs to be enabled.
And a few files are missing which I took from Honor V10 firmware.
If you want to revert, just check the zip for what files to remove and remove
ro.config.face_detect=1
ro.config.face_recognition=true
from /product/etc/prop/local.prop
Thanks to @LastStandingDroid for testing and pointing out where prop was located.
Update 2: as a "side-effect", face recognition enables the Smart Rotate option in Settings -> Display (at the bottom). Thanks to @LastStandingDroid for pointing this out
Update: I've tested it on C432B363 now, and it doesn't work.
It's supposed to say "Settings -> Security & Privacy -> Face unlock" . But in this firmware it says "Face recognition".
I'm not sure what changed, maybe Settings.apk.
It definetly works on B365 but safetynet is not passing on this one yet.
Nice...! Tried.... Seems to work....!
Addymore said:
Nice...! Tried.... Seems to work....!
Click to expand...
Click to collapse
Heh it does and it's fast too we tried before release.
Sent from my DUK-L09 using Tapatalk
able to flash but hangs when trying to enroll face...
Very nice, thx
ystokar said:
able to flash but hangs when trying to enroll face...
Click to expand...
Click to collapse
Then didn't flash properly?
Also you might need to turn your head a bit and don't be too close.
Sent from my DUK-L09 using Tapatalk
how could i have flashed it wrong?
could it be related to "/odm"? what is this?
---------- Post added at 09:29 AM ---------- Previous post was at 09:26 AM ----------
i'm using twrp 3.2.1.0 (fromthefuture)
ystokar said:
how could i have flashed it wrong?
could it be related to "/odm"? what is this?
---------- Post added at 09:29 AM ---------- Previous post was at 09:26 AM ----------
i'm using twrp 3.2.1.0 (fromthefuture)
Click to expand...
Click to collapse
If you can't backup files in odm in in twrp that means you didn't succeed. It looks like you don't as the setting is enabled.
Please use the one in op instead
Odm partition handles some camera and audio files. Much more isn't in there
Sent from my DUK-L09 using Tapatalk
@ante0 @LastStandingDroid....I don't know how this face unlock is supposed to work!!! I flashed ok, I can even add my face....but it is not unlocking my phone....always asking me to use FP....but the showing notification on locked screen is likely working.....!!!
Addymore said:
@ante0 @LastStandingDroid....I don't know how this face unlock is supposed to work!!! I flashed ok, I can even add my face....but it is not unlocking my phone....always asking me to use FP....but the showing notification on locked screen is likely working.....!!!
Click to expand...
Click to collapse
When you're in Face unlock in settings, do you see "Direct unlock" option?
And if you don't, do you use Firedance data mod?
Updated OP with magisk module.
I will test B363 with Firedance mod today, another user reported it as not working and it may have to do with mod...
He could only see one option in Face unlock, "Direct unlock" and "swipe to unlock" was missing. But those strings are in Settings.apk in B363 s they're not missing.
Addymore said:
@ante0 @LastStandingDroid....I don't know how this face unlock is supposed to work!!! I flashed ok, I can even add my face....but it is not unlocking my phone....always asking me to use FP....but the showing notification on locked screen is likely working.....!!!
Click to expand...
Click to collapse
Remove fingerprint unlock I don't think you can use both.
Also if you have locked screen press power and just look at your screen it shall unlock fast
Sent from my DUK-L09 using Tapatalk
LastStandingDroid said:
Remove fingerprint unlock I don't think you can use both.
Also if you have locked screen press power and just look at your screen it shall unlock fast
Sent from my DUK-L09 using Tapatalk
Click to expand...
Click to collapse
I tested yesterday, you can have both FP and face.
Atleast I could. I added FP after face though.
ante0 said:
When you're in Face unlock in settings, do you see "Direct unlock" option?
And if you don't, do you use Firedance data mod?
Click to expand...
Click to collapse
Direct unlock in not there....!!! I am on L29C185B371......!!!! I dont use Firedance mod neither.....
---------- Post added at 03:30 PM ---------- Previous post was at 03:28 PM ----------
LastStandingDroid said:
Remove fingerprint unlock I don't think you can use both.
Also if you have locked screen press power and just look at your screen it shall unlock fast
Sent from my DUK-L09 using Tapatalk
Click to expand...
Click to collapse
I tried removing FP too....!!! same issue....!!! I cannot use Face unlock.....if there is a way I can make some logs.....u can tell me so I do it.....
Addymore said:
Direct unlock in not there....!!! I am on L29C185B371......!!!! I dont use Firedance mod neither.....
---------- Post added at 03:30 PM ---------- Previous post was at 03:28 PM ----------
I tried removing FP too....!!! same issue....!!! I cannot use Face unlock.....if there is a way I can make some logs.....u can tell me so I do it.....
Click to expand...
Click to collapse
Try setup it again. For me it works. Sometimes (rare cases) it might not show up
Sent from my DUK-L09 using Tapatalk
LastStandingDroid said:
Try setup it again. For me it works. Sometimes (rare cases) it might not show up
Click to expand...
Click to collapse
U mean flashing it again....? In twrp?
---------- Post added at 03:05 PM ---------- Previous post was at 03:00 PM ----------
LastStandingDroid said:
Try setup it again. For me it works. Sometimes (rare cases) it might not show up
Click to expand...
Click to collapse
U mean flashing it again...! I tried removing the face data.... It didn't work...
Addymore said:
U mean flashing it again....? In twrp?
---------- Post added at 03:05 PM ---------- Previous post was at 03:00 PM ----------
U mean flashing it again...! I tried removing the face data.... It didn't work...
Click to expand...
Click to collapse
I was reefering to face data. Let's try
Remove all current password/fingerprint
Remove faceunlock
Enroll face again and setup a pattern or pin/password.
If it doesn't work there might be a data bug.
Side note: for thus who has issues installing this mod use magisk and the magisk module. It's easy as 123 also won't need u to have a twrp with odm support
LastStandingDroid said:
I was reefering to face data. Let's try
Remove all current password/fingerprint
Remove faceunlock
Enroll face again and setup a pattern or pin/password.
If it doesn't work there might be a data bug.
Side note: for thus who has issues installing this mod use magisk and the magisk module. It's easy as 123 also won't need u to have a twrp with odm support
Click to expand...
Click to collapse
I didn't work....! Tried magisk to.... It didn't work neither! :crying:
Addymore said:
I didn't work....! Tried magisk to.... It didn't work neither! :crying:
Click to expand...
Click to collapse
Hmm sounds strange. How doesn't it work?
Sent from my DUK-L09 using Tapatalk
LastStandingDroid said:
Hmm sounds strange. How doesn't it work?
Click to expand...
Click to collapse
I see settings are there.... Face unlock option.... Adding face data also works...! Trying to unlock with face.... Phone not unlocked....!