Hi all, I've recently broke my MM so i went to go and get it fixed... I did but now the software update is back to 2.1 before, it was at 2.3.7 and i would like to update it to anything better then this version maybe like 2.2 froyo or something else!!!
Thanks in advance.
Motorola Milestone
2.1
In my signature there is a link to a guide. That's describes everything step by step.
The only extra things you have to do is to install the 2.2 devtree and baseband update (they are needed to custom roms).
You can download the devtree update from HERE.
And the baseband update from HERE.
Erovia said:
In my signature there is a link to a guide. That's describes everything step by step.
The only extra things you have to do is to install the 2.2 devtree and baseband update (they are needed to custom roms).
You can download the devtree update from HERE.
And the baseband update from HERE.
Click to expand...
Click to collapse
So am I just supposed to download them and then put them on the root of my sd card and do the boot in recovery thing and update it from there?
Not in the root directory.
Put them in /OpenRecovery/updates
That way they will be easily accessible from within recovery.
Related
I cant update because i'm rooted and and cant flash the official google update to my device (I get errors). Is there a rooted version of 2.2 FRF85B? I'm on AT&T and if there is can someone provide a link? I been looking and cant seem to find one. TIA
JD914 said:
I cant update because i'm rooted and and cant flash the official google update to my device (I get errors). Is there a rooted version of 2.2 FRF85B? I'm on AT&T and if there is can someone provide a link? I been looking and cant seem to find one. TIA
Click to expand...
Click to collapse
Yes, check out Lox 's thread in Android development. Or try eViLs or Leo's prepackaged ROMs.
take a look here. It's a pre-rooted, deodexed version with stock or black status bar.
You guys are the best! Thanks soooooo much!!!
This is the LOX instructions I followed :
http://htcpedia.com/forum/showthread.php?p=67177#post67177
Worked perfectly for me I was running FRF50 upgraded from Cyanogen 5.0.6.
I'm Not sure if it said to do this but I flashed the no-radio version then let it completely boot so everything is 'written' or whatever causes the first boot to take longer.
I saw I lost root, no big surprise because there was were root files posted as well.
Rebooted into RA Recovery and flashed the root file.
No Wipe when going from FRF50 to this ROM, all my programs still work just like they did before.
Thanks a lot guys
I have been searching for awhile now, and just can't seem to find out what I need. I have a rooted N1 that I was running Kang-O-Roma's Latest Froyo build and Radio on it, but now need to get it back to stock with OTA updates. I flashed a the stock image that I got from the developers section, but still no updates. when the phone downloads an update it just restarts in recovery. I thought I may need to downgrade the radio, but no luck. I baught an Evo and am selling my beloved N1, but the person who baught it wants it completely stock, and able to get updates. he doesn't mind it being rooted if this is possible. Please help.
hurrycaine3000 said:
I have been searching for awhile now, and just can't seem to find out what I need. I have a rooted N1 that I was running Kang-O-Roma's Latest Froyo build and Radio on it, but now need to get it back to stock with OTA updates. I flashed a the stock image that I got from the developers section, but still no updates. when the phone downloads an update it just restarts in recovery. I thought I may need to downgrade the radio, but no luck. I baught an Evo and am selling my beloved N1, but the person who baught it wants it completely stock, and able to get updates. he doesn't mind it being rooted if this is possible. Please help.
Click to expand...
Click to collapse
reboot the phone into bootloader then use the passimg file to return back to stock once this is done it should reboot into 2.1 then leave it alone till u see the update available or use the code to force the update then reboot and it should pop up within a few hours...
The update pops up, It downloads it, it even says what the update includes, but then when it tries to install, it restarts back into recovery mode, and doesnt' install the update. Is the update on the phone somewhere? I still have the froyo radio on the phone, because I cannot find and original Radio update Zip. Adb won't work on my new computer.
Did you get the stock recovery back in there or still using a custom one?
I loaded the stock image found in the developers section under original shipping, but it didn't downgrade the radio. I followed all of the instructions, but still, the update won't install. I have been searching and searching, but still can't come up with a solution.
hurrycaine3000 said:
I loaded the stock image found in the developers section under original shipping, but it didn't downgrade the radio. I followed all of the instructions, but still, the update won't install. I have been searching and searching, but still can't come up with a solution.
Click to expand...
Click to collapse
yes you need the stock pass img file so it can bring everything to stock including the recovery....do you still have the custom recovery??it wont work with it i beleive...
The passimg file will take everything back to stock: ROM, Recovery, and Radio
J.L.C. said:
The passimg file will take everything back to stock: ROM, Recovery, and Radio
Click to expand...
Click to collapse
yes it would if you are using the right file then it should work...fine....
thanks for all the help, I had flashed the stock ROM, but not the passimg.zip. so even though the rom was right everything else was not. Thanks again. I'll wait to see if I get an update.
hurrycaine3000 said:
thanks for all the help, I had flashed the stock ROM, but not the passimg.zip. so even though the rom was right everything else was not. Thanks again. I'll wait to see if I get an update.
Click to expand...
Click to collapse
no problem hope this works!
Ok, this should be my last question on this subject. under about phone it now says:
Model Number-
Nexus One
Firmware version-
2.1 update 1
Baseband version-
32.26.00.24U_4.04.00.03_2
Kernel version-
2.6.29-01117-g4bc62c2
[email protected] #1
Build number-
EPE76
As I recall EPE76 was a leaked ROM
I tried using 22607-ERD79-update-nexusone-stock-signed.zip and renaming it passimg.zip , but that didn't work. am I OK with the EPE76 build or do I need to get the ERD79 build on there to be?
A: get updates, and
B: truly be stock.
thanks again. I had no problem when I was trying cooked roms and updating radios and stuff. go figure this would be the thing to get me stuck.
hurrycaine3000 said:
Ok, this should be my last question on this subject. under about phone it now says:
Model Number-
Nexus One
Firmware version-
2.1 update 1
Baseband version-
32.26.00.24U_4.04.00.03_2
Kernel version-
2.6.29-01117-g4bc62c2
[email protected] #1
Build number-
EPE76
As I recall EPE76 was a leaked ROM
I tried using 22607-ERD79-update-nexusone-stock-signed.zip and renaming it passimg.zip , but that didn't work. am I OK with the EPE76 build or do I need to get the ERD79 build on there to be?
A: get updates, and
B: truly be stock.
thanks again. I had no problem when I was trying cooked roms and updating radios and stuff. go figure this would be the thing to get me stuck.
Click to expand...
Click to collapse
hmm i can try to post the link to u so u can download the img i have that is definite a work for me?? email if you want it faster...
@OP
If you're still have problems, this thread has all the files you need in the first post: http://forum.xda-developers.com/showthread.php?t=614850
I bought my Nexus One off another member here, and he was kind enough to flash back to the original ERD79 before he sent me the phone but he didn't flash the stock recovery.img. I got the update to Froyo almost immediately after I turned the phone on, but it would not install. After flashing the stock recovery.img the OTA installed just fine
xghostyxjokerx said:
hmm i can try to post the link to u so u can download the img i have that is definite a work for me?? email if you want it faster...
Click to expand...
Click to collapse
here it is http://www.4shared.com/file/GqphBx3X/PASSIMG.html
xghostyxjokerx said:
here it is http://www.4shared.com/file/GqphBx3X/PASSIMG.html
Click to expand...
Click to collapse
I tried installing this one, and it said "The main version is older" and then asked if I want to restart.
hurrycaine3000 said:
I tried installing this one, and it said "The main version is older" and then asked if I want to restart.
Click to expand...
Click to collapse
go root to 2.2 or 2.1.update 1 first then use it okay..
Now that you mention it I do remember seeing something about that, while I was searching for an answer to this dilemma. Thanks again, I'll let you know.
hurrycaine3000 said:
Now that you mention it I do remember seeing something about that, while I was searching for an answer to this dilemma. Thanks again, I'll let you know.
Click to expand...
Click to collapse
okay... will b around if needed..
Okay, I'm relatively new to Android phones in general, but recently purchased a captivate and absolutely love it. I upgraded to the unofficial leaked version of froyo and am now wanting to try out a custom rom. The issue I'm having is as follows:
I've read that before flashing a custom rom, it is recommended to flash back to the stock rom first. When I tried that, I flashed back to the stock rom (pre OTA update that fixed the 3 buttom recovery mode issue) and was not able to get into recovery mode. I then tried to do the ota update and it kept failing. I then flashed back to the leaked froyo rom via download mode and am basically stuck here. My question is two fold. Does anyone have a link to the stock rom file that has the latest update (I forget the version number) or can I just flash to a new custom rom from the leaked froyo build? Would that build be considered stock?
jcr81 said:
Okay, I'm relatively new to Android phones in general, but recently purchased a captivate and absolutely love it. I upgraded to the unofficial leaked version of froyo and am now wanting to try out a custom rom. The issue I'm having is as follows:
I've read that before flashing a custom rom, it is recommended to flash back to the stock rom first. When I tried that, I flashed back to the stock rom (pre OTA update that fixed the 3 buttom recovery mode issue) and was not able to get into recovery mode. I then tried to do the ota update and it kept failing. I then flashed back to the leaked froyo rom via download mode and am basically stuck here. My question is two fold. Does anyone have a link to the stock rom file that has the latest update (I forget the version number) or can I just flash to a new custom rom from the leaked froyo build? Would that build be considered stock?
Click to expand...
Click to collapse
Don't flash back to stock unless absolutely necessary. Otherwise, it's pointless and just creates additional opportunities for things to mess up and brick your phone. Wiping your data and cache partitions with CWM recovery should be sufficient for a clean ROM install.
As for the stock ROM you're looking for, it depends on your Captivate. If your phone came with JF6 and working button combos, and is an older build (1009 or older), this should work fine: http://forum.xda-developers.com/showthread.php?t=731989
If your button combos were disabled, either use this: http://forum.xda-developers.com/showthread.php?t=818439 -OR- the first link followed by installing the OTA update (be careful, as an incomplete OTA update can perma-brick your phone).
If your phone is a build 1010 or came with JH7, the stock ROM you need is JH2. Follow this guide: http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Hey,
I want to revert back to stock 2.3.4 but I want to keep root and clockwork etc, so anyone know where I can get a stock 2.3.4 flashable zip?
Right now I am on CM7 latest
Thanks
i found this thread
http://forum.xda-developers.com/showthread.php?t=1061648
if i download this rom from the thread:
GRJ22 OTA (stock vanilla - odexed, unrooted):
http://www.mediafire.com/?shsmauak48b8hc4
MD5: 3B2B7B0BAAAA803365A573FC3864A150
is that the original stock 2.3.4?
anyone?........
The mediafire one is linked to a stock 2.3.4 that is deodexed that is still unrooted. If you want to read up on what deodexed means, check out this article.
http://www.addictivetips.com/mobile/what-is-odex-and-deodex-in-android-complete-guide/
You will still need to root this ROM.
In the thread, the top link is "stock" 2.3.4 but rooted and deodexed (along with the other things he mentions in the thread).
Basically, you have two options. Use PASSIMG to get your phone back to stock and update to 2.3.4. Then, if your bootloader is unlocked, you can flash a custom recovery and flash one of the many su.zip files out there that give you root access. This will truely be a rooted stock 2.3.4 install. If you want the easier route, use the link in the thread you referenced above.
I built one about a month ago for someone who wanted the same thing, but I'm struggling to find it...
EDIT: I've just thrown something together, if you still need it? Basically, I removed the stock recovery from the GRI40 and GRJ22 updates, so that you can flash them without losing recovery. You can then flash the su zip, and you will be updated, with root...
Tested, and it works...
The OTAs were just updates (about 5mb) from previous versions so there is not stock full system zip. You would probably need to flash stock 2.3.3 then you can flash the 2.3.4 update. Now there is also a 2.3.6 update that is flashed from 2.3.4.
danger-rat said:
I built one about a month ago for someone who wanted the same thing, but I'm struggling to find it...
EDIT: I've just thrown something together, if you still need it? Basically, I removed the stock recovery from the GRI40 and GRJ22 updates, so that you can flash them without losing recovery. You can then flash the su zip, and you will be updated, with root...
Tested, and it works...
Click to expand...
Click to collapse
Danger-rat,
please can you upload it.
I currently have 2.3.3 rooted somehow :S and it keeps FC sometimes and the default music app cant read my songs... but rootexplorer can. So i want to get a clean rom see if it all works. and ofc keep recovery.
As noted in the thread, this is something I've just thrown together. It's basically the full GRI40 update, and the GRJ22 update patch with the stock recovery and recovery restore scripts removed from both- this means your custom recovery will not be over written.
Backup your apps (Titanium, or whatever)
Boot into recovery.
Make a backup of your current ROM
Do a full wipe
Flash GRI40
Flash GRJ22
Flash the su zip
Reboot
Restore your apps...
Here are the files:
http://db.tt/mmzlv77
http://db.tt/VG9IVBgJ
http://db.tt/BJudP0L
xD
danger-rat said:
snip
Click to expand...
Click to collapse
sorry i just pm'd you and you've already replied ages ago. That tea break took longer than expected... thanks again !
/edit just figured it out i think. gonna give it a shot.
/edit2 i think i screwed it up, i was trying another stock rom i found and it seems to have done something, so i cant run my apps and do an app back up, which is no biggie from what i remember it just takes AGES to re-download. and set up settings etc. also no rom back up atm
but as long as i get back i hope its ok
YES thanks Danger-Rat
Brilliant help, absolutely no errors. just gotta restore apps and settings now.
Thanks again
Hi guys,
First of all, I apologize in advance if this isn't the correct place and/or thread title for my question. I've rarely posted in this forum as I'm usually able to find what I'm looking for.
I'll try to describe the issue fully so bear with me. If you're not patient, skip the next two paragraphs and go to the problem.
I bought my Galaxy S more than two years ago; back then it had Android 2.1 and I believe I also flashed to 2.1.1 via Samsung Kies.
I later flashed Froyo via Odin, rooted with 1ClickLagFix and installed a ton of apps. I haven't updated anything for more than a year, perhaps year and a half. I recently uninstalled many applications I wasn't using, including the lag fix, unrooted and began preparing to flash something newer. I didn't have the time though, so I dropped the project, and besides, the phone is working much smoother without all the unnecessary crap I had before.
Yesterday I decided to finish the job and flash DarkyROM 11 Black Edition. I rooted the phone again using Z4root, installed CWM ROM Manager and flashed CW recovery. I need the recovery in order to flash CM9 and then the ROM per the installation instructions for DarkyROM.
At this point I might as well wait for v.12, but I'll still need the CW recovery I guess. Or I may flash v.11 as planned; I still haven't decided.
The problem: CW recovery is flashed, but when I reboot I go to 3e recovery instead (tried with the 3 buttons or boot to recovery from ROM Manager, same result). I then copied the CW recovery file directly on the SD card and renamed it update.zip (it was recovery-update.zip) and tried to apply it. Didn't work. As far as I remember it said it couldn't verify file integrity or something. I can check for sure if you'd like.
Here's what I'm running (I'll put what I see, let me know if you need more):
GT-I9000
Firmware: 2.2
Baseband version: I9000XXJPP
Kernel version: 2.6.32.9
[email protected] #1
Build number: FROYO.XFJP7
ROM Manager (installed v. 5.5.1.4 yesterday) says current recovery is ClockworkMod 2.5.1.2.
I'd appreciate any insight. I don't have much experience flashing my phone, so if you have a solution, it would be best to include not only links to relevant threads but also an explanation as to what steps I should follow in my specific case.
Thanks in advance!
Filkolev said:
Hi guys,
First of all, I apologize in advance if this isn't the correct place and/or thread title for my question. I've rarely posted in this forum as I'm usually able to find what I'm looking for.
I'll try to describe the issue fully so bear with me. If you're not patient, skip the next two paragraphs and go to the problem.
I bought my Galaxy S more than two years ago; back then it had Android 2.1 and I believe I also flashed to 2.1.1 via Samsung Kies.
I later flashed Froyo via Odin, rooted with 1ClickLagFix and installed a ton of apps. I haven't updated anything for more than a year, perhaps year and a half. I recently uninstalled many applications I wasn't using, including the lag fix, unrooted and began preparing to flash something newer. I didn't have the time though, so I dropped the project, and besides, the phone is working much smoother without all the unnecessary crap I had before.
Yesterday I decided to finish the job and flash DarkyROM 11 Black Edition. I rooted the phone again using Z4root, installed CWM ROM Manager and flashed CW recovery. I need the recovery in order to flash CM9 and then the ROM per the installation instructions for DarkyROM.
At this point I might as well wait for v.12, but I'll still need the CW recovery I guess. Or I may flash v.11 as planned; I still haven't decided.
The problem: CW recovery is flashed, but when I reboot I go to 3e recovery instead (tried with the 3 buttons or boot to recovery from ROM Manager, same result). I then copied the CW recovery file directly on the SD card and renamed it update.zip (it was recovery-update.zip) and tried to apply it. Didn't work. As far as I remember it said it couldn't verify file integrity or something. I can check for sure if you'd like.
Here's what I'm running (I'll put what I see, let me know if you need more):
GT-I9000
Firmware: 2.2
Baseband version: I9000XXJPP
Kernel version: 2.6.32.9
[email protected] #1
Build number: FROYO.XFJP7
ROM Manager (installed v. 5.5.1.4 yesterday) says current recovery is ClockworkMod 2.5.1.2.
I'd appreciate any insight. I don't have much experience flashing my phone, so if you have a solution, it would be best to include not only links to relevant threads but also an explanation as to what steps I should follow in my specific case.
Thanks in advance!
Click to expand...
Click to collapse
clockworkmod 2.... really ? because cwm 5 or 6 is the actual version .. maybe rom manager cannot flash the recovery in froyo, try to connect phone .with kies and update to gingerbread
Sent from my GT-I9001 using xda premium
Jonboy2011 said:
clockworkmod 2.... really ? because cwm 5 or 6 is the actual version .. maybe rom manager cannot flash the recovery in froyo, try to connect phone .with kies and update to gingerbread
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Can't do... Kies cannot upgrade the firmware since I'm on a custom ROM (or because it didn't match my country, I don't quite remember the reason).
I was following the installation instructions for DarkyROM for Froyo; it says I should have it rooted with CWM and use the recovery to flash CM9 and the ROM itself afterwards, so I believe Froyo isn't the issue. The kernel perhaps? Have no idea, I'm a novice more or less. I do know how to follow instructions though, so I'm not a complete idiot
Besides geting a newer ROM with newer Adnroid version I'd also like to clean up the mess I've been creating for the past year and a half. Maybe flashing a stock ROM and then DarkyROM would be easier. I'm looking for the most time-efficient method.