I have a 2013 Chevy Spark with bluetooth. It has the voice control activation button on the steering wheel. When I had my Galaxy Note, this would activate S-Talk and I could use voice controls through the car. When I try with the One, an app pops up and quickly closes on the phone, then the radio says voice control isn't supported, but half the time if I start talking, the voice control works anyways. Does anyone know if there is a way to fix this? I am on ARHD, but I had the same issue when I was still completely stock with a locked bootloader. This could be a deal breaker because I do a ton of driving and use voice control a ton.
Related
Hi all,
I have an O2X and a JVC KD-X50BT digital receiver installed on my car. With this setup I'm supposed to be able to play my phone's music through car's speakers using the bluetooth from both devices and also answer or make phone calls, everything without the need of getting my phone out of my pocket. Since I installed CM7.2 a few days ago every time I pair both devices I get a message in the receiver "WAIT VOICE Optimus 2X" and I can't do anything, it seems like the receiver is waiting for me to say something. If I click "Back" button (it's the only button I can click =S) in the receiver the message disappears but the music won't play even if the player in the phone shows the music is playing. The only thing I've found that I can do is go to the properties of the BT pairing connection in the phone and disable the "phone" profile leaving only "Media" profile enabled. By doing this I'm able to listen to my music but I lose the phone capabilities in the receiver. If I enabled again the phone profile the music mutes and the "WAIT VOICE" message appears again.
With CM7 comes installed the Voice Dialer app. which if I open it while paired with the receiver the message "WAIT VOICE Optimus 2X" appears and if I close it the message disappears. I have tried uninstalling this app. and also TTS Service and Pico TTS but nothing works. I really don't need and don't want to have voice commands, for that I have the receiver which comes with a microphone and a lot of options for calling.
This never happened before with the stock ROM and yesterday I tested with a second Android phone with stock ROM and it paired with no problems and with both "phone" and "media" profiles, no "WAIT VOICE" messages or anything like that, everything just perfect, music, phone calls, messages, everything.
So, before CM7 everything was perfect, any ideas? maybe a service running in the background that launches some kind of app or something when it pairs? an app that makes the receiver think that I entered in "talk" mode so it is waiting for me to say something?
Right now I have a piece of useless technology installed in my car that I can't use and I'm not going to sacrifice phone or music capabilities =/!
Hello everyone,
I'm a recent convert from an iPhone 5. Work took over everyone's cell contracts so I thought why not try it. So far it's been a mixed bag. The hardware is great: nice big screen, loud speakers, decent camera. But, there are somethings that have me scratching my head, like the lack of unified email, on-screen notifications, etc. I've managed to work out most of them but one that is really bugging me is voice control in my car.
I have a JVC X50-BT stereo. With my iPhone, I could hold the call button and it would invoke Siri. With Siri I could send messages, ask for addresses, or pick music to play. With the One, the voice button says "Not Supported". I'm able to stream music and use the next/prev buttons, go through the phonebook, recent and missed calls, but the call/voice control button doesn't work.
Does anyone know of a work around or way of achieving this? I know it may sound like a small thing but leaving the phone in my pocket and being able to do these tasks without taking it out or looking at it while I'm driving is important. I didn't think that it could support all the other features over bluetooth except for this one.
I'm running HTC Sense 4.2.2 (flashed) on a Telus phone.
Thanks.
I am unable to use any of my wired headsets with the Nexus 6. The middle button launches Google Now during a call. On the Nexus 5, the same headsets toggled Mute with that button. I have tried apps to reprogram the button (like Headset Button Controller) but they can not override the Google Now function.
Is anyone else seeing this? Any ideas?
Same problem here! Can't find a way to reassign the button to media control or something else. It always starts Google Voice Search.
If pressed when phone is locked I get a message telling me I have to unlock the phone to use Google Voice Search!
Headset Button ControllerTrial did not work!
play.google.com/store/apps/details?id=com.kober.headset
Does turning of Bluetooth headset in Settings, Search & Now, Voice do anything to correct this problem?
stevemw said:
Does turning of Bluetooth headset in Settings, Search & Now, Voice do anything to correct this problem?
Click to expand...
Click to collapse
It's off as default. Benn off the whole time.
Bought SUPRA NiTRO earbuds, problem solved.
Hi,
I've bought a "Jabra Stealth" headset and I'm unable to launch Google Now on my Nexus 6 (Android stock 5.0.1, FrancoKernel r8) with the dedicated button although it's a built-in feature of the headset. I assume that this is an issue of compatibility with Android 5.0. Jabra has answered me that I didn't configure vocal commands well but that's false. Has someone encountered the same problem and has a solution for it?
Thanks
xof9999 said:
Hi,
I've bought a "Jabra Stealth" headset and I'm unable to launch Google Now on my Nexus 6 (Android stock 5.0.1, FrancoKernel r8) with the dedicated button although it's a built-in feature of the headset. I assume that this is an issue of compatibility with Android 5.0. Jabra has answered me that I didn't configure vocal commands well but that's false. Has someone encountered the same problem and has a solution for it?
Thanks
Click to expand...
Click to collapse
I have a similar issue. I use a Plantronics Voyager Legend. A couple of issues:
1) press and hold of the action button will bring up "voice dialer" instead of "google now". I dont know if you've ever tried to use voice dialer, but i think its more or less deprecated since the nexus 1 was the new kid on the block.
There is an app for bluetooth on the app store that lets you choose what to launch with that button. however, it didnt work that well for me. lots of lag and it blended together with other bluetooth related issues.
2) Bluetooth never seems to "turn off". I have a smart sensor enabled headset. IE the phone should know if i have the headset on or not, and pipe phone calls and notifications and ringtones to the speaker if i dont have it on and to the headset if i do. instead, the phone constantly pipes EVERYTHING to the bluetooth headset. no fix yet.
3) phone connection to my car's bluetooth makes my audiobook start playing. I have no idea why. it is not a setting in the audiobook app. Seems that the fix is to disable streaming media over bluetooth (contacts/messages only)
From what ive witnessed with issues regarding audio, screen brightness, bluetooth, this is yet another half-baked google product with little to no attempt at a proper follow through. just a crap device rushed to market with tons of potential and a complete crap OS and barely any thought or usability effort put into anything except the home screen.
I also have the N6 with the P Legend. I am having issues where the caller can barely hear me. Do you know if you have this issue at all?
shrimants said:
I have a similar issue. I use a Plantronics Voyager Legend. A couple of issues:
1) press and hold of the action button will bring up "voice dialer" instead of "google now". I dont know if you've ever tried to use voice dialer, but i think its more or less deprecated since the nexus 1 was the new kid on the block.
There is an app for bluetooth on the app store that lets you choose what to launch with that button. however, it didnt work that well for me. lots of lag and it blended together with other bluetooth related issues.
2) Bluetooth never seems to "turn off". I have a smart sensor enabled headset. IE the phone should know if i have the headset on or not, and pipe phone calls and notifications and ringtones to the speaker if i dont have it on and to the headset if i do. instead, the phone constantly pipes EVERYTHING to the bluetooth headset. no fix yet.
3) phone connection to my car's bluetooth makes my audiobook start playing. I have no idea why. it is not a setting in the audiobook app. Seems that the fix is to disable streaming media over bluetooth (contacts/messages only)
From what ive witnessed with issues regarding audio, screen brightness, bluetooth, this is yet another half-baked google product with little to no attempt at a proper follow through. just a crap device rushed to market with tons of potential and a complete crap OS and barely any thought or usability effort put into anything except the home screen.
Click to expand...
Click to collapse
When the caller can barely hear you, check your phone. Sometimes, even though my headset is on, the phone doesn't care and attempts to use the phones speaker or mic.
shrimants said:
When the caller can barely hear you, check your phone. Sometimes, even though my headset is on, the phone doesn't care and attempts to use the phones speaker or mic.
Click to expand...
Click to collapse
That's my current issue...
I can answer the calls with either my truck or ear piece, but both will randomly not have audio. The phone says it's connected BT, but I have to switch the source to speaker or handset and then click back over to BT. The whole time while I'm begging the person on the other end not to hang up and to hold on a second. Not bad when I'm at my desk with earpiece....let's just say it's a bit more nerve-racking on the highway.
scap99 said:
That's my current issue...
I can answer the calls with either my truck or ear piece, but both will randomly not have audio. The phone says it's connected BT, but I have to switch the source to speaker or handset and then click back over to BT. The whole time while I'm begging the person on the other end not to hang up and to hold on a second. Not bad when I'm at my desk with earpiece....let's just say it's a bit more nerve-racking on the highway.
Click to expand...
Click to collapse
Same here. Also have a problem where, when on a call, an incoming call will kill bluetooth. This makes it unusable in my car as it becomes a real safety issue. I have to turn off BT and use the speakerphone which luckily is good enough for the job. Even switching the source and switching back doesn't always work for me.
I regret not sending the phone back for this problem. I'm waiting on v5.1 this month as rumored, hoping that will solve the problem. May just go back to my Lumina 925.
Has anyone tried going into Google settings app -> Search & Now -> Voice and turn on Bluetooth Headset (records audion through bluetooth headset if available).
I have Nexus 5 and Jabra Stealth and I had the same problem. I could solve it thanks to these indications: hackerspace.kinja.com/reassign-your-bluetooth-phone-button-to-open-google-n-1507391132
Same issue with calls not having audio through the car Bluetooth unless I switch to speaker/handset then back. I guess Marshmellow really messed up Bluetooth on a lot of people's phones not just us. Tried different rooms(AOSP, CM, stock) no help even tried updating the radio which helped Bluetooth crashing completely and requiring a restart but the phone issues remain.
Hello, I'm using Android Auto 3.1.581054 on my Honor 8 smartphone, and the Sync3 v3.0 multimedia system on a Ford Fiesta mk8.
If I don't use AA, i can push the voice activation button on the steering wheel, and dictate commands to access some of the car's functions (for example, change FM radio station).
When i connect my smartphone via USB and enable AA (e.g., to use google maps on the car's screen), the google assistant overtakes the steering wheel voice activation button; I can therefore only use it to dictate Android functions on the phone (maps directions, send whatsapp message, etc). I can't control via voice the car's functions anymore, at least until I disconnect the USB cable, because obviously Android knows and can nothing about the car's FM radio or whatever.
This is a very unfortunate behaviour, because to change the FM radio channel I now have to fiddle with the car's touch screen controls, that is very distracting while driving.
Is there a way to manage this problem? I heard that, on some previous versions (of what? AA? Sync3?), pushing the steering wheel voice activation button once triggered the car's Sync3 recognition, while pushing it for 3 seconds would trigger the google assistant recognition. Is it true? What happened to this function? E.g., see https://productforums.google.com/forum/#!topic/android-auto/SNCguGKYiZE
Doesn't answer your direct question, but I'm also using a Mk8 Fiesta, and wanted to point out that if you're already on one of Radio audio sources you can use the steering wheel next and previous track buttons to switch between stations within the preset group you're in. I've only tried this on DAB but it probably works on FM as well.
I've also found that sometimes it's possible to select whichever source and station you would like from a list using the steering wheel menu button (provided you're looking at the audio screen on the instrument cluster - not sure if all the trims have this functionality?). This works all the time without Android Auto connected, and sometimes when you're within Android Auto, but not always. I think this might be to do with starting up a radio source before connecting the phone, and making sure not to start any audio playing within Android Auto. Haven't had chance to properly test this yet.
Let me know if you discover any tricks!