Database Develop

[ROM][DISCONTINUED]!!PureBlur v1.2-based on the latest HKTW 2.3.4 official update!!

This is my first ROM!
WORKING NOW!!
DO NOT download the ROM UNLESS you know what you are doing!
I am not responsible for any bricked!!
Screenshot gone! (just stock blur UI)
Features:
Brightness hacking down to 5
64M vm heap size
Webtop via HDMI (Thanks zomgno1)
Zipaligned
Deodexed
Rooted
4 points multi-touch with 15 seconds crack
EXT4
faux123's kernel [email protected]
Click to expand...
Click to collapse
Installation guide:
1. press Vol-down while booting and navigate to "Android recovery" Press Vol-up for going into Clockworkmod Recovery (Custom CWM-based Recovery 5.0.2.3-atrix4.1 recommended)
2. BACKUP FIRST!!!
3. Wipe data/factory reset
4. Wipe cache
5. Wipe dalvik cache
6. install the ROM
7. Reboot to enjoy the overclocked Blur!
Click to expand...
Click to collapse
Changelog:
Next update:
---
v1.2
Brightness hacking down to 5
64M vm heap size
Webtop via HDMI
Download update v1.2
v1.1.1
Removed Carrier name from status bar
1% battery mod
Download update v1.1.1
v1.1
Delete DSP manager
Add EXT4 support
multi-touch hack with 15 seconds crack
v1.0
Initial release
Click to expand...
Click to collapse
Known issue(s):
Click to expand...
Click to collapse
Thanks to faux123, Diviance, zomgno1(HDMI hack) and also Motorola
Click to expand...
Click to collapse
For those who suffer from widget problem, please install the stock kernel. Since I don't know if your device compatible with HK stock kernel.
DOWNLOAD (v1.1)
DOWNLOAD WEBTOP

I was about to download the original sbf and deodex it.
You save my time.
Many thanks
Sent from my MB860 using XDA App

Any other goodies you can list?
Special install instructions?
Sent from my MB860 using xda premium

supermerkin said:
Any other goodies you can list?
Special install instructions?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
HKTW got special settings for crystal talk

does your rom suffers from the missing widgets problem every time you shut down and boot up again? i am asking because i tried already homebase and aura which have faux's kernel and both have the same problem... CM7 beta has a kernel that does not have this problem...

So I dl and flashed using the instructions you posted.
I originally had blue cronic installed and it seems like most of the ui from it was still running after reboot. Also all of the apps had a fc issue going on so I had to restore. Should I have to flash back to stock before flashing your rom?
Sent from my MB860 using xda premium

totti123456 said:
does your rom suffers from the missing widgets problem every time you shut down and boot up again? i am asking because i tried already homebase and aura which have faux's kernel and both have the same problem... CM7 beta has a kernel that does not have this problem...
Click to expand...
Click to collapse
I would assume so. The missing widgets problem appears to be linked to faux's kernel, which this has. In faux's thread even people on CM7 that use his kernel experience the widget problem.

supermerkin said:
So I dl and flashed using the instructions you posted.
I originally had blue cronic installed and it seems like most of the ui from it was still running after reboot. Also all of the apps had a fc issue going on so I had to restore. Should I have to flash back to stock before flashing your rom?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
It is no necessary to back to stock.
I had CM7 before. After Wipe data, cache, then install, no problem at all.

Lol did you remove the download link?

I'll try it again. Maybe I'll do a restore shook the way back to after I unlocked and rooted before flashing and see what happens.
Sent from my MB860 using xda premium

So I restored back to stock and cleared/reset everything but still unlocked and reinstalled.
Out got stuck on the dual core boot loader over and over. Pulled the battery and restored again.
What it looked like was happening when I installed was an update and not a full rom? I downloaded the files you had posted, was it the right one at 7:00am this morning est?
Sent from my MB860 using xda premium

supermerkin said:
So I restored back to stock and cleared/reset everything but still unlocked and reinstalled.
Out got stuck on the dual core boot loader over and over. Pulled the battery and restored again.
What it looked like was happening when I installed was an update and not a full rom? I downloaded the files you had posted, was it the right one at 7:00am this morning est?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
So, this is the reason I removed the ROM and now I'm try to make it OK
SORRY!

This rom is probably for ME860
ME860 is china version of Atrix international,
Atrix international should be safe to use,
but not yet confirmed for Atrix 4G (ATT Atrix)

alistair3149 said:
This rom is probably for ME860
ME860 is china version of Atrix international,
Atrix international should be safe to use,
but not yet confirmed for Atrix 4G (ATT Atrix)
Click to expand...
Click to collapse
This is my mistake. I need to figure out why it will stuck on boot.
Sorry for my mistake!!
I will upload the ROM when everything OK.

No worries, at least I'm not bricked. Just post the update and I'll try it again later.
Sent from my MB860 using xda premium

nok07635 said:
This is my mistake. I need to figure out why it will stuck on boot.
Sorry for my mistake!!
I will upload the ROM when everything OK.
Click to expand...
Click to collapse
It is not your fault,
this rom is for ME860,
but Atrix international should be okay

can you release a version with stock kernel? i dont need to overclock, just want a stable deodexed custom rom... thanks!

Boot up success but I am using AURA ROM developer Diviance's updater-script. I must ask his permission to release!
BTW I try to reboot the phone to see if the widgets missing. Honestly, No problem with BlurHome launcher

The widget problem seems to occur at a random time. It took a few days worth of rebooting to happen to me on homebase. After it happened the only permanent fix was to revert to stock kernel.
Sent from my MB860 using Tapatalk

hi.İ want to ask:
which languages are supported your rom?

Extra Apps doesn't work

I have installed JR003L with devil kernel but my Extra app doesn't work. It is giving me a dropbox link with error message. I flashed my ROM twice to fix the problem but still doesn't work. Everything was fine when I had JR003H. Can anyone please tell me how I can fix it.
I am running Samsung Galaxy S I9000

rajamahbub said:
I have installed JR003L with devil kernel but my Extra app doesn't work. It is giving me a dropbox link with error message. I flashed my ROM twice to fix the problem but still doesn't work. Everything was fine when I had JR003H. Can anyone please tell me how I can fix it.
I am running Samsung Galaxy S I9000
Click to expand...
Click to collapse
read the Rom's thread FAQ section, you have OTA updater app installd and you need to update it via CWM.

yoske84 said:
read the Rom's thread FAQ section, you have OTA updater app installd and you need to update it via CWM.
Click to expand...
Click to collapse
Can't find it OTA updater app....Not even in CWM....

rajamahbub said:
Can't find it OTA updater app....Not even in CWM....
Click to expand...
Click to collapse
well then we have the same problem :laugh:
just posted here a thread that i don't have the OTA-updater installed..

yoske84 said:
well then we have the same problem :laugh:
just posted here a thread that i don't have the OTA-updater installed..
Click to expand...
Click to collapse
Hi...I found the OTA-updater from another forum. I installed it and it's working allright now...

Ya i also downloaded the no datadata version and pulled it out from the system\app folder.
I need to flash it in recovery and wipe cache and dalvik right?
Sent from my GT-I9000 using xda app-developers app

yoske84 said:
Ya i also downloaded the no datadata version and pulled it out from the system\app folder.
I need to flash it in recovery and wipe cache and dalvik right?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I flashed with B9 No datadata with Semaphore kernel. It's perfect now and working everything is so far perfect....

CM 10 stable out.. but symlinks failed :(

CM 10 stable is out.
But symlinks failed error occured and then phone does not boot up, had to flash it.

redownload it and reflash
at cm10 topic, some people installed susccesful.
maybe your zip bad file

agritux said:
redownload it and reflash
at cm10 topic, some people installed susccesful.
maybe your zip bad file
Click to expand...
Click to collapse
Tried twice but ended with same result. Will try again later.

Work very well for me \m/
Sent from my CM10 P970 using xda premium

Once make sure that the zip is fully downloaded, if possible check md5 checksum of the zip
Did you try to update through CM updater ?

Check this:
http://forum.xda-developers.com/showpost.php?p=34070675&postcount=3066
And post a issue in the issue tracker

Keep getting get.prop errors when i try to flash this rom (downloaded from official cm website).
Am I being an idiot?

loggy02 said:
Keep getting get.prop errors when i try to flash this rom (downloaded from official cm website).
Am I being an idiot?
Click to expand...
Click to collapse
Install another Recovery. It should be version 5.x.x.x. and if you use touch currently, try to use non touch version.

N00BY0815 said:
Install another Recovery. It should be version 5.x.x.x. and if you use touch currently, try to use non touch version.
Click to expand...
Click to collapse
Ya guyz try updating to the latest cwm recovery using rom manager and then update through cm updater. You should not face a prob.
Sent from my LG-P970 using xda app-developers app

Anyone tried this ROM?
Sent from my LG-P970 using xda app-developers app

voonkz said:
Anyone tried this ROM?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
CM10 Stable is as good as the nightlies, the bugs were never fixed. God bless all who will flash this stable thinking that it's mostly bug free and get a huge shock

Thank you guys for all your suggestions.
Installed cm 10 stable but nothing great, its same as nightlys with some bugs.

Sorry ....
Sent from my Nexus 7 using xda premium

[Q] Updating Touchpad

Hello all!
I've been out of the Android game for a little while and haven't updated my Touchpad in quite some time. I'm kinda looking for some direction in how I should go about updating my tablet to the newest SGA build once it's out. My current stats are as follows :
CWM Recovery 5.0.2.6
Model Number : cm_tenderloin
Android Version : 4.0.3
Kernel Version : 2.6.35
CyanogenMod Version : 9.0.0-RC0 Alpha 2
Like I said, I've fallen out of the loop of what's been happening and just looking for some quick advice of where I should start out in getting this thing updated. Thanks everyone!

Update recovery with Goo Manager or ROM Manager. Download the build you want. Full wipe (system data cache) and flash in recovery.

[EDIT] NVM.. I found it..
I'm looking in GooManager and don't see an option for updating the recovery. Is this something only found in ROM Manager?
bananagranola said:
Update recovery with Goo Manager or ROM Manager. Download the build you want. Full wipe (system data cache) and flash in recovery.
Click to expand...
Click to collapse

silentbob714 said:
[EDIT] NVM.. I found it..
I'm looking in GooManager and don't see an option for updating the recovery. Is this something only found in ROM Manager?
Click to expand...
Click to collapse
Top right hand corner tap the 3 dots followed by install recovery script which will install the latest TWRP recovery.

Wait what about expanding the system partition? Acmeinstaller3?
Sent from my MB860 using xda premium

atrix4g18 said:
Wait what about expanding the system partition? Acmeinstaller3?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Yup.

Do I need to uninstall anything before putting on ACMEInstaller?

silentbob714 said:
Do I need to uninstall anything before putting on ACMEInstaller?
Click to expand...
Click to collapse
Why don't you just acmeuninstall then acmeinstaller3
Sent from my MB860 using xda premium

Any thoughts?

Dear all;
Today i finally decided to unlock the bootloader and s-off the device..but after these..my wifi was not working ...and still stucked at the turning on wifi phase.
Factory reset wiping cache did not help
I found out that i should flash a newnstock rom...but to be honest i did not find the stock 4.3 for the european device (ruu).. i found some zips but the recovery stopped at verifying package when i said install from phone...so to be honest i have no clue how to proceed
How to flash it what to do? The guides are not always complete or the links were not working... i need help i will post the info on my device..
Would you be so kind and tell me what to do?
In details of course)
Thank you very very much
Sent from my gf's GT-I9300 using xda app-developers app

Which rom are you running?

Its the normal stock 4.2.2 i never flashed its rom its the normal ota i got previously
But see attachments
Sent from my GT-I9300 using xda app-developers app

zimilaci said:
Its the normal stock 4.2.2 i never flashed its rom its the normal ota i got previously
But see attachments
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Umh, download from mike's thread the stock rom and flash this.
Or flash only the boot.img from fastboot.
Seems a kernel "issue"
Sent from One with Tapa4

Well i am afraid i need more than that....i mean where can i find that guide..and how to flash it? Which method applies for my case?
Please be beginner friendly thanks for your help in advance.
Sent from my GT-I9300 using xda app-developers app

zimilaci said:
Well i am afraid i need more than that....i mean where can i find that guide..and how to flash it? Which method applies for my case?
Please be beginner friendly thanks for your help in advance.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Umh, download the stock rom from mike's thread.
Now, do a nandroid backup from recovery and after flash the rom.
I think there isn't any stock rom for your version main, so the easiest solution is this
However, you've tried to erase the cache from fastboot with the command: fastboot erase cache
??
Sent from One with Tapa4

Well i tried the wipe cache/ factory reset etc etc..
In the morning (cause its 2:23 am) i will try the nandbackup(although i have no clue about that) and then a 4.3 stock flash would be reasonable or not?
Thanks
Sent from my GT-I9300 using xda app-developers app

Defo kernel issue.
- Get odexed from here
http://android-revolution-hd.blogspot.no/p/android-revolution-hd-mirror-site-var.html?m=1
Or whatever you desire
- Put the downloaded Rom on to your SD.
- Enter cwm/twrp recovery and do a nand (=backup of current ROM)
- install zip of new stock Rom.
Reboot when done.
Either this or just flash bulletproof kernel from flar. see if it gets sorted.
Sent from my HTC One using XDA Premium 4 mobile app

Sindroid said:
Defo kernel issue.
- Get odexed from here
http://android-revolution-hd.blogspot.no/p/android-revolution-hd-mirror-site-var.html?m=1
Or whatever you desire
- Put the downloaded Rom on to your SD.
- Enter cwm/twrp recovery and do a nand (=backup of current ROM)
- install zip of new stock Rom.
Reboot when done.
Either this or just flash bulletproof kernel from flar. see if it gets sorted.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well I installed TWRP, did a backup, with the default selection, after that I booted, and copied the files.,
Then I copied the odexed file to the device, booted into recovery, and installed it.
Now Wifi Works , and everything is on the "latest" release and still stock.
My question is:
What ROM-s can I try out? Only Odexed? Or Google Editions as well (from the link you provided) and if yes...
I just make a backup from the current setup, and copy it, and then recovery from the backup am I right?
But mainly my problem has been solved... So thank you very much !

Odexed or deodexed, whatever rocks your socks.. if you are gonna do some themeing of icons you need deodexed.
You are S-off and are free to flash loads of stuff.
Google edition? Sure test it out if you want to.
Sure, just back up current Rom and keep it safe on your phone if you can. Any problems occurs you can just restore it.
Sent with pigeons.