Hey guys, Google hasn't been as kind as ya'll are here, so I figured I'd give you a try. My mothers HTC HD7 failed to update via Zune a few months ago, and it has been stuck on the splash screen since (HTC with white background). So I took it from her since she now has an Android, and I'm looking to modify it. Upon booting into the hard reset mode, I do not get the actual recovery, I get a red, green, blue, and white screen. It reads as follows:
PD29110 SS-BC (4K) <------- In Red Rectangle
SPL-1.20.2250.0(111584)
MicroP(LED) 0x07
TOUCH S1(v2.A, #1625
SD SANDISK 15193MB Class0 <------- In Green Rectangle
Parition Info-v211v413
<------- In Blue Rectangle
USB <-------- In White Rectangle (When hooked up to my PC by USB cable. In this mode it installed drivers)
Note: In the middle of writing this, I saw it suggested here that this is a bootloader, so there should be a fix; http://forum.xda-developers.com/showthread.php?t=1161108
I think it's pretty clear what the question is here. How do I at the very least get this thing back to factory? Any help would be greatly appreciated. I'm no stranger to using programs to factory reset my phone, as I've soft bricked my LG Optimus One numerous and today it is running perfect on Cyanogenmod 9.
CodmasterRob said:
Hey guys, Google hasn't been as kind as ya'll are here, so I figured I'd give you a try. My mothers HTC HD7 failed to update via Zune a few months ago, and it has been stuck on the splash screen since (HTC with white background). So I took it from her since she now has an Android, and I'm looking to modify it. Upon booting into the hard reset mode, I do not get the actual recovery, I get a red, green, blue, and white screen. It reads as follows:
PD29110 SS-BC (4K) <------- In Red Rectangle
SPL-1.20.2250.0(111584)
MicroP(LED) 0x07
TOUCH S1(v2.A, #1625
SD SANDISK 15193MB Class0 <------- In Green Rectangle
Parition Info-v211v413
<------- In Blue Rectangle
USB <-------- In White Rectangle (When hooked up to my PC by USB cable. In this mode it installed drivers)
Note: In the middle of writing this, I saw it suggested here that this is a bootloader, so there should be a fix; http://forum.xda-developers.com/showthread.php?t=1161108
I think it's pretty clear what the question is here. How do I at the very least get this thing back to factory? Any help would be greatly appreciated. I'm no stranger to using programs to factory reset my phone, as I've soft bricked my LG Optimus One numerous and today it is running perfect on Cyanogenmod 9.
Click to expand...
Click to collapse
That is the bootloader screen indeed.
The good thing is that your bootloader isn't bricked or damaged.
More than likely during the update process the rom image was wiped or corrupted.
Try this first, download a stock/shipped specific rom for your device. Unzip all the contents (use a program like 7zip) to a new folder on your desktop.
Enter your device into bootloader mode and connect the device to your PC via USB cable. Device will change from "Serial" to "USB" click on the RUUwrapper (Rom Update Utility wrapper) in the folder and follow the prompts on the screen. That's it, should work and boot up.
I would recommend a stock/shipped rom that has a SPL of 3.xxx or under... That way if you want to install a custom rom your SPL doesn't have to be downgraded. To install a custom rom your SPL has to 3.xxx or lower, then you have to install RSPL/HSPL and the you can flash a custom rom of your choice.
If flashing the stock/shipped rom through bootloadet doesn't work then you'll need to use the goldcard/ Y cable method to flash the stock/shipped rom and then you can still install a custom rom. permitting your SPL is at or under 3.xxx
Here's a link to the stock/shipped roms -
http://forum.xda-developers.com/wiki/HTC_HD7/Shipped_Roms
Here's Shadow's tutorial on downgrading SPL, flashing XSPL and installing roms. It has all the links you'll need for the roms, goldcard/ Y cable method and everything you'll need -
http://forum.xda-developers.com/showthread.php?t=1295068
If you have any questions or need any help... Just let me know!
Thank you sir, you are indeed awesome. I'm going to try this tomorrow. I'm guessing SPL is the equivalent of a base band for an Android? I'm not familiar with Windows, but if I've got the similarities down I could figure it out relatively easy.
Sent from my LG-P509
Okay... I'm looking at the ROMs, and I have no clue which one I need. The phone is phone T-Mobile, so I'm sure TMOUS is the first part, but I have no clue what exact ROM I need. Any one will do?
CodmasterRob said:
Okay... I'm looking at the ROMs, and I have no clue which one I need. The phone is phone T-Mobile, so I'm sure TMOUS is the first part, but I have no clue what exact ROM I need. Any one will do?
Click to expand...
Click to collapse
Pretty much any TMOUS rom will work. Use this one though -
http://www.filefactory.com/file/cc8...9.25a_22.45.50.21_Signed_SCHUBERT_RELEASE.exe
The SPL on this one is 3.1 so after you install it and get the device booted, you can go to Shadow's tutorial and download RSPL and install it, download HSPL and install it and then download and install a custom rom. RSPL/HSPL and the custom rom are installed while in bootloader mode.
Hi
I wanted to flash my winphone 7 with a custom ROM. I tried several things as I had no idea overall. This included some DFT executables and some RUU_Schubert_HTC_Europe_xxxxx.exe files.
As none of them were working, I tried to find out why and just figured out, I was using the wrong files to update my phone. As I now have the right file (RUU_Schubert_HTC_Europe_5.10.401.04_SLSPL_Signed_ by_ansar.zip) that could patch my phone, one of the earlier files has broken my SPL somehow.
When I boot into the bootloader (vol down) the part at the bottom with the white background doesn't show the connection method anymore at all.
It doesn't even say serial when not connected via USB cable. Is my phone broken now? Meaning can I not flash it anymore?
My Windows 7 also does not recognize the phone while in bootloader mode. Before, every time I attached the phone via USB cable in bootloader mode it recognized it...
Here are my "bootloader" details:
PD29*** SS-BC (4K)
SPL-5.12.2250.0 (135916) MNG
MicroP (LED) 0x07
TOUCH S1 (v2.A, #1625)
SD SANDISK 15193MB
Partition Info-v211v413
F400
Radio Software version: 5.71.09.02a_22.51.50.21U
Radi Hardware version: A.12.0.D4
Bootloaderversion: 5.12.2250.0 (135916)
I'm sorry for this but...
IDIOT!!!! use the search function upper right!!!
you MUST use the gold card method it's the only way, My phone was like yours, I searched and read about it, gold card, XSPL, and done custom roms.
SEARCH!
in boot loading mode it says.
PD29120 SS-BC(4k)
SPL-2.20.2250.0(118798)
MicroP(LED) 0x07
Touch S1*v1.8 #1624
asadnow2k said:
in boot loading mode it says.
PD29120 SS-BC(4k)
SPL-2.20.2250.0(118798)
MicroP(LED) 0x07
Touch S1*v1.8 #1624
Click to expand...
Click to collapse
1 - HSPL
2 - Install Dynamics 2.0
3 - You... Happy!
Search for them...
hi all
My hd7 model no is PD29100. But when i am going in bootloader SPL mode it is showing wrong model id as
SCHU100 MFG SS-BC (4K)
SPL - 1.57.2250.0(113571)
MicroP(LED) 0X07
TOUCH S1(v1.8,#1624)
now the problem is that my phone start it stuck at hp logo mode and show msg
BLDR 1.57.2250
MODEM N/A
I tried to install RSPL 3rd generation which support SCHU100 device but after installing RSPL it give successful message but my device doest reboot and it when I manually reboot it shows SPL 1.57 only.
When I try to install rom through RUU it gives error invalid model id.
Please help.
Goldcard method
you are using the traditional method which only works if you have the a valid RUU (Carrier ID)
The goldcard method can flash any HD7 rom(AT&T, O2, Unbranded, etc.) into your HD7...
hi all
My hd7 model no is PD29100. But when i am going in bootloader SPL mode it is showing wrong model id as
SCHU100 MFG SS-BC (4K)
SPL - 1.57.2250.0(113571)
MicroP(LED) 0X07
TOUCH S1(v1.8,#1624)
now the problem is that my phone start it stuck at hp logo mode and show msg
BLDR 1.57.2250
MODEM N/A
I tried to install RSPL 3rd generation which support SCHU100 device but after installing RSPL it give successful message but my device doest reboot and it when I manually reboot it shows SPL 1.57 only.
When I try to install rom through RUU it gives error invalid model id.
Please help.