Hello everyone,
I seem to have a problem upgrading my GT-N7000 to JB, the phone downloaded a 494MB update, and restarted to FOTA mode.
The progress bar went from 0-100% in about 15-20mins, but the phone has since then not completed the FOTA.
If I restart the phone by long-pressing power key, the FOTA restarts, but again gets stuck at the 100% mark. Pressing Vol Keys and powering on makes no difference.
Further the phone isn't recognised in Windows - says 'Device Malfunction'. The cable is fine, as it works with another phone.
My bad luck it was, the phone data isn't backed up - I never expected anything to go wrong. Is there a remote possibility of data recovery before I wipe the phone?
Now, how do I get back access to my phone, and how do I complete the upgrade, or reset the phone? I would be grateful if you help me or guide me how to proceed. Taking it to the service point would be the last resort, I want to try out everything I can before I send this in - it's out of warranty.
Regards
Abhishek
AbhishekKr said:
Hello everyone,
I seem to have a problem upgrading my GT-N7000 to JB, the phone downloaded a 494MB update, and restarted to FOTA mode.
The progress bar went from 0-100% in about 15-20mins, but the phone has since then not completed the FOTA.
If I restart the phone by long-pressing power key, the FOTA restarts, but again gets stuck at the 100% mark. Pressing Vol Keys and powering on makes no difference.
Further the phone isn't recognised in Windows - says 'Device Malfunction'. The cable is fine, as it works with another phone.
My bad luck it was, the phone data isn't backed up - I never expected anything to go wrong. Is there a remote possibility of data recovery before I wipe the phone?
Now, how do I get back access to my phone, and how do I complete the upgrade, or reset the phone? I would be grateful if you help me or guide me how to proceed. Taking it to the service point would be the last resort, I want to try out everything I can before I send this in - it's out of warranty.
Regards
Abhishek
Click to expand...
Click to collapse
Dont worry. In general your personnel data are stored in internal SD and external SD, not disturbed by a system install process.
In that situation you'd better to install a new JB4.1.2 ROM using Odin in download mode.
Firstly see what ROM to be flashed. Official stock ROM, custom ROM, download it.
Read how to use Odin in download mode by connection USB PC-phone.
Odin is utility under PC. Download mode on the phone is entered after hold in the same time volume-down, home and power.
Related
Hi,
I want to say that everyone is very helpful in this forum and you all rock. I'm having some problems with my rooted samsung captivate. I installed the I9000 Full rom, and it was running fine for a few days then I notice it was very sluggish, so I did a factory restore, but data and apps didn't delete. So I then when in to recovery (R2) and deleted cache and all user data files, then it did a factory restore, and it went in boot up pass the att and samsung S i9000 screen and when to the lock screen, but once I unlock the phone, its just in the black screen, when I click and hold on to the home button it goes to recent, no recnet application and under Task Manager, I have 0 active applications. It won't load any programs or apps. I tried restoring the phone by holding the down volume key and power on button, it goes to R2 recovery and then reinstall package, but it can't find the package. I have it on the memory card, but I guess I deleted it from the internal memory when I did a factory restore. Am I screw, or can someone guide me through this and fix my fone. Thanks in advance. XDA Rules.
Odin one click back to stock, assuming you can get into download mode. Also do a master clear just to be sure. A fresh start might be just what your Captivate needs.
Sent from my SAMSUNG-SGH-I897 using XDA App
The same thing happened to me yesterday. Phone was on, battery fully charged. I got on my flight and left it on (forgot I guess) and when I got off the flight, the screen was black. I'll also add, that over the past 3 days the phone was starting to get extremely sluggish (for no reason that I can think of). But back to the rest of the story...
I couldn't get it to turn on, so I pulled the battery and tried again. This time I got the AT&T logo and the Samsung animation. Once the animation was completed the screen goes black.
The phone is still on. How do I know? If I touch any of the bottom buttons they light up.... and stay lit up until I do a battery pull.
Deleted/cleared everything, same behaviour.
I tried reflashing JI6, it works but fails to reinstall the packages, otherwise same behaviour.
I tried reflashing JF6, same behaviour.
The flashes always succeed, but always end up in failure.
Now for the interesting part. I went into recovery mode on JI6. I try to format the internal /sdcard, I get a message that it cannot mount /sdcard /dev... not found.
So to recap, phone not working, recovery mode available, download mode available. adb doesn't seem to be working, but if someone can tell me how to access the phone with "adb shell" while in recovery mode, I might be able to diagnose why /dev... is not mounting... Or at least how I could fix it using adb.
Any help would be appreciated. I'm traveling and needless to say, this is a huge inconvenience, I'm lucky I had my backup phone to at least be able to get online and be able to make calls.
HI,
thanks for quick response. I can get to the recovery mode, where the android holding the shovel. But when I load Odin one click, it don't seem to detect and do anything. o success 0 failed. I installed the samsung captivate windows 7 drivers, the funny thing is when I plug my brink phone in the usb port, it say unrecongize usb. Any other suggestions. Thanks
hksmr2 said:
HI,
thanks for quick response. I can get to the recovery mode, where the android holding the shovel. But when I load Odin one click, it don't seem to detect and do anything. o success 0 failed. I installed the samsung captivate windows 7 drivers, the funny thing is when I plug my brink phone in the usb port, it say unrecongize usb. Any other suggestions. Thanks
Click to expand...
Click to collapse
the shovel is NOT recovery mode, it is download mode.
have ODIN running BEFORE you get your phone in download mode
Hello,
I was previously using LG True version 0.6 ROM but wanted to go back to stock.
So I used it via the NVFlash way, half way through it putting it back to Stock, I accidentally unplugged my device thinking it was finished, now my phone won't boot up. Whenever I try to re-flash it with NVFlash the CMD auto shuts off with a message I can't read since it's that quick at shutting off when trying.
I have tried restoring via Smart Flash but that doesn't work (Tried holding vol down & plugging in but doesn't populate anything).
My phone won't boot.
I've tried re-installing the NVidia drivers, same issues.
The NVFlash gets the different stages before failing (Usually it gets to the point where my phone goes into S/W Upgrade mode, then fails)
I cannot get into S/W Upgrade mode to restore via Smart Flash as nothing happens.
Device manager picks up the phone as an NVidia USB Recovery device.
I appreciate any help as I'm lost without my phone.
Step-by-step guides are preferable since I'm new to flashing etc.
The phone is in download mode.
You need to find a way to send the rom to the phone, so the phones downloads the rom again and starts working.
Try pm'ing Paul over Twitter.
This is fixed now.
Unsure why, but trying a different USB port enabled me to use NV Flash and now booted up fine.
Thanks anyway guys and sorry for wasting your time.
Hi,
I've flashed multiple times before without an issue until today.
First, here's my background information:
Samsung Captivate (ATT)
Was running Continuum 5.4.1 but it felt laggy so I attempted to flash MIUI 1.5.13.
Here's what I did:
I wiped my phone using the Odin One click tool, then flashed CM7's kernel and then performed formats of the cache, system, and data, then installed MIUI RC2. After this step the phone should have restarted, then I planned to shut it down and reboot into recovery and flash 1.5.13 onto it.
My problem(s):
-Boot into recovery/download mode using key combinations is not working.
-The ADB console reports device not found when I try to run adb shell.
-The phone is undetected in Droidexplorer.
-When I attempt to download an app to boot to recovery with the phone says there is no space even though nothing has been installed other then MIUI.
What I would like to do:
Get back to stock with download/recovery modes working.
On a side note: MIUI works, but in a very limited way. I can navigate through it, but it won't allow the installation of applications due to there not being room on the phone (as said before).
Thanks!
Update - my phone was being identified as a Nexus S, so without those drivers my phone could not be debugged via USB. I now have the drivers and can perform ADB commands, however rebooting into recovery and into download mode both result in the phone restarting without going to the download or recovery mode.
Try using ODIN and repartitioning. I have good videos on standard ODIN and Heimdall on YouTube just search them. If you can not get out of this contact me, I have been able to partition debrick in the past and it's actually considered by me far more annoying than standard bootloader JTAG in certain situations. Let's hope yours is easier to bail out of!
First of all thanks for the reply and direction.
Secondly:
After working on this all last night I was able to get the phone recognized by Odin and my computer, now I am stuck at one of two screens depending on what I do.
If the phone is powered off then plugged in, the battery charging screen appears but there is no animation and after unplugging it the battery charging image remains.
If I power the phone on it hangs on the Samsung boot screen.
Repartitioning does sound like the proper direction for me to take, but, when I use Odin it freezes while setting up the connection to the phone.
when the phone is powered off try holding both vol keys and plugging in the cable. That could possibly get you to download mode. If not try vol down/pwr at the same time since you are now on GB bootloaders the keys are a bit different. Let me know what happens and good luck
maybe you should try to build a jig and use it to get into the download mode first. or you can buy it on ebay, just search for "micro usb jig".
I've tried every volume and power combination possible to no avail, I can't get into download mode. I've given in and am exchanging my phone. Thanks for the help anyway guys!
Yesterday I suddenly found my phone to be turned off by itself. When I tried to turn it on again, nothing usually happened. Sometimes however, it looked like it would turn on, but the white bootlogo would barely show, or maybe up to a second, and then it would go black again. When connecting a charger the charging icon would show for a second, and then black again, and still the phone wouldn’t boot. Recovery or download mode wouldn’t work either. I was hoping it was only the battery that had just died, since the phone won’t work at all without the battery, even with the charger connected. But when I tested a friends battery today, it would still not boot, and my battery worked fine in his phone. But, at least it turned on each time now, showing the bootlogo for a second, and then all black again. Recovery mode still won’t work, but I’m able to get it in download mode. If I connect the phone to the PC by cable first, it won’t start or go in download mode, I have to get it in dowmload mode first and then connect. I was using stock system v2.3.3 from about a year ago, but with Clockworkmod kernel.
So what could have happened? I figure the system is either corrupt, or even wiped?
Or could the phone itself be badly corrupted?
I also have to mention, that a few months ago the internal and external SD-card was suddenly wiped, and I got a message about error on one of them and had to reformat.
Since download mode is ok, I hope there is a chance to maybe flashing the system again with Odin?
Is ther any way to connect the phone to the pc and get access to the memory to maybe copy whatever data still there, if any? Or can I reflash to just put the new system on top of everything without formatting?
I think your sd connectors are corroded or damaged. For your data try to flash the semaphore kernel by Odin to get a recovery (link ). After flashing, go into the recovery look for "mont and storage" and select "mount usb storage" or something like that. With your pc connect your device and copy your data in your pc like an usb stick.
If it doesnt work, say goodbye to your data and try to reflash a rom by Odin
Link here
http://hotfile.com/dl/140301534/be8872c/I9000XXJVU_I9000OXAJVU_OXA.rar.html
Instruction:
- Unzip the file
- Open Odin (if you don't have it download here )
-Put CODE in the PDA case
-Put MODEM in PHONE
-Put CSC in CSC
-Now Put your phone in Download Mode and connect it
-Press Start and don't touch anything until the great case above the yellow one became green.
Please reply me for more info
Thanks, I'll try that tomorrow morning at work, don't have the time today.
At least I do have a complete backup from about two months ago, so it's no disaster about the data. There's not really anything that important on the phone, it's just all the work setting everything up like I want it again.
Please reflash a stock rom with odin...
I was able to flash semapfore kernel, but still I couldn't get the phone in recovery mode.
Flashed stock firmware 2.3.3 (last nordic version), and the phone booted fine, but lots of old programs kept crashing and messing with the system. Best of all, everything on the internal sd was there, so all the latest titaniumbackup was there. So I copied this to the PC, did a factory reset, flashed CF-root again, copied the titaniumbackup and clockworkmod-backup to the internal sd, and cwm-backup is beeing restored as we speak. Then titaniumbackup will be restored and everything should be fine for now.
I'll be leaving for holiday in a week, so I don't want to use lots of time right now to do a clean setup of the phone. There is way too much other things I have spend my time on before the holiday. But after the holiday I think I'll just have to do so.
Thanks for helping.
For your apps who crash you have to wipe apps data (with TB).
The apps crashing when I just reflashed didn't really matter since I was going to install the backup anyway.
But a few apps kept crashing even after I flashed the backup. So wipe app data was what I eventually found out I had to do.
And so the same thing happened again.
But this time it doesn't seem like reflashing will help at all.
Crappy trashphone, it's been a disaster rom day one.
First backup every thing and wipe
Sent from my GT-I9000 using xda app-developers app
dakudakuji said:
First backup every thing and wipe
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
The phone won't boot, and won't go into recovery mode, only download mode.
When I turn it on the boot logo only shows barely, and then nothing happens, just like last time.
I've tried reflashing several times using Odin, but this time it doesn't help, phone still won't boot. I've tried both without repartition, and wit repartition (and pit).
My friend got me to put his phone on cm9 after using froyo for a long time.
The strange thing was that the method to get into recovery suddenly changed from volume up, power and home. For some reason it is now both volume buttons, home and power ..
Just thought I'd share this since your recovery should work after a kernel flash.
Sent from my GT-I9000 using xda app-developers app
Hey guys
Samsung Galaxy Mini 5570 is a pretty old device now and definitely not worth to talk about, but It's for my aunt and she said i HAVE to fix it otherwise she will kick my butt.
This is the whole story:
Phone was running a very low android version (it was 2.1 or something) that i could barely install apps on it (Just installed WhatsApp), I decided to upgrade it to a higher version so i could install other applications like Line and Telegram for her, so basically i had to flash CWM file first because it was required, I flashed it using this link:
http://www.droidthunder.com/root-install-clockworkmod-cwm-recovery-samsung-galaxy-minipop-gt-s5570/
They said flash the cwm file and factory reset your phone but i flashed the cwm file and rebooted my phone without factory reset, everything was working fine :good: but i decided to follow the instruction so i rebooted into the recovery mode and factory reseted my phone (by my phone i mean her phone, but i'm gonna say my phone instead) and guess what, it never booted up again. stuck on Samsung logo.
But i could go into the download and recovery mode, so basically i followed this instruction:
http://www.droidthunder.com/update-samsung-galaxy-minipop-gt-s5570-android-4-2-1-cyanogenmod-10-1/
which is from the same guy, I flashed it using recovery mode and flashed gapps too, everything went normal without any errors. So i rebooted my phone and ............
a black screen poped up, I was really worried because i couldn't boot my phone, nor could i go into the recovery or download mode. I don't know if i could or not but the only thing I'm getting right now is a black screen or a backlight.
The only thing that seems to be working is when i hold Power+Volume UP button, my laptop can detect my phone (as Samsung CDMA Technologies) but can not flash anything using Odin, it stucks on "setup connection" message. Nothing else is working, I tried:
Home+power+volume down
Home+power+volume down+volume up
Power+volume down
Power+home
etc
I also tried a hundred different ways like completely uninstalling the drivers (with or without kies) pulling battery out, try those key combination while battery is out and reinsert battery while holding them but nothing is working.
I found this article yesterday which is for unbricking the hard bricked phones, but ADB can not detect my phone:
http://www.engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
Please help me guys, And do not suggest me to take it in Customer Service because i would if i could.
Thanks in advance