Related
I have searched the forums, and I can not find the answer to my specific situation. Please forgive me if it is there somewhere. The story…….
- last working ROM was VIVO ICS official, RUU installed. (RUU_VIVO_ICS_35_S_HTC_WWE_4.10.405.1_Radio_20.74.30.0833U_3831.18.00.11_M_release_266013_signed.exe). HBOOT was changed to 2.02 S-ON, bootloader locked. I unlocked via HTCdev. Before this I had IceColdSandwich 8.1.1, ENG Hboot S-OFF. I had originally used the GB downgrade ROM to S-OFF, and restored IceCold backup after this.
- I wanted to be S-OFF again, and so tried installing this zip using CWM Recovery, following the advice of tpbklake:
vivo_signed_WWE_4.10.405.1_ICS_SENSE36_5.zip Version 1.1
(from http://forum.xda-developers.com/showthread.php?t=1756500&page=1)
- now boot loop. I tried reinstalling other ROMs which I have successfully installed in the past (GB downgrade, stock ICS), and also restore various backups, but all result in boot loop (stuck on white HTC screen). Each time I would use CWM Recovery to clear dalvik, cache etc.
- I have now followed 'fix' instructions in that same thread, ie. :
1. Download the file lib.zip from here: http://bit.ly/PwK4BH
2. Unzip the lib.img and place it on your PC where you have fastboot.exe installed.
3. Boot into FASTBOOT USB mode and then enter the following command:
fastboot flash lib lib.img
4. Download the file format_lib_update.zip from here: http://bit.ly/RIpEUL
5. Copy it to your SD card.
6. Boot into recovery and then install format_lib_update.zip
7. While in recovery format the SYSTEM partition.
8. Then reinstall vivo_signed_WWE_4.10.405.1_ICS_SENSE36_5.zip
But at step 3 I get the following:
C:\adb>fastboot flash lib lib.img
sending 'lib' (155648 KB)...
OKAY [ 27.553s]
writing 'lib'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 52.417s
C:\adb>
Please help! I’m close to considering myself properly bricked, and using that as an excuse to go and buy a OneX.
jcr67 said:
I have searched the forums, and I can not find the answer to my specific situation. Please forgive me if it is there somewhere. The story…….
- last working ROM was VIVO ICS official, RUU installed. (RUU_VIVO_ICS_35_S_HTC_WWE_4.10.405.1_Radio_20.74.30.0833U_3831.18.00.11_M_release_266013_signed.exe). HBOOT was changed to 2.02 S-ON, bootloader locked. I unlocked via HTCdev. Before this I had IceColdSandwich 8.1.1, ENG Hboot S-OFF. I had originally used the GB downgrade ROM to S-OFF, and restored IceCold backup after this.
- I wanted to be S-OFF again, and so tried installing this zip using CWM Recovery, following the advice of tpbklake:
vivo_signed_WWE_4.10.405.1_ICS_SENSE36_5.zip Version 1.1
(from http://forum.xda-developers.com/showthread.php?t=1756500&page=1)
- now boot loop. I tried reinstalling other ROMs which I have successfully installed in the past (GB downgrade, stock ICS), and also restore various backups, but all result in boot loop (stuck on white HTC screen). Each time I would use CWM Recovery to clear dalvik, cache etc.
- I have now followed 'fix' instructions in that same thread, ie. :
1. Download the file lib.zip from here: http://bit.ly/PwK4BH
2. Unzip the lib.img and place it on your PC where you have fastboot.exe installed.
3. Boot into FASTBOOT USB mode and then enter the following command:
fastboot flash lib lib.img
4. Download the file format_lib_update.zip from here: http://bit.ly/RIpEUL
5. Copy it to your SD card.
6. Boot into recovery and then install format_lib_update.zip
7. While in recovery format the SYSTEM partition.
8. Then reinstall vivo_signed_WWE_4.10.405.1_ICS_SENSE36_5.zip
But at step 3 I get the following:
C:\adb>fastboot flash lib lib.img
sending 'lib' (155648 KB)...
OKAY [ 27.553s]
writing 'lib'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 52.417s
C:\adb>
Please help! I’m close to considering myself properly bricked, and using that as an excuse to go and buy a OneX.
Click to expand...
Click to collapse
OK, so what is the state of your HBOOT? Are you still HBOOT 2.02.0002 UNLOCKED?
When you are using the an unlocked HTC HBOOT and you flash a custom ROM in CWM, you then manually have to extract the boot.img file from that ROM's zip file and flash it manually in FASTBOOT USB mode. If you don't do that, you will get a boot loop.
What you need to do if you can still get into CWM and the bootloader is still UNLOCKED is reflash that ROM again and then flash the boot.img file in FASTBOOT mode and you should be ok.
tpbklake said:
OK, so what is the state of your HBOOT? Are you still HBOOT 2.02.0002 UNLOCKED? .
Click to expand...
Click to collapse
yep
tpbklake said:
When you are using the an unlocked HTC HBOOT and you flash a custom ROM in CWM, you then manually have to extract the boot.img file from that ROM's zip file and flash it manually in FASTBOOT USB mode. If you don't do that, you will get a boot loop.
What you need to do if you can still get into CWM and the bootloader is still UNLOCKED is reflash that ROM again and then flash the boot.img file in FASTBOOT mode and you should be ok.
Click to expand...
Click to collapse
I should have mentioned, I already tried that. However, I will try it one more time. I tried so many things - if I try it again in isolation, I will be 100% sure I am telling you the truth.
Thanks for the reply.
jcr67 said:
I should have mentioned, I already tried that. However, I will try it one more time. I tried so many things - if I try it again in isolation, I will be 100% sure I am telling you the truth.
Thanks for the reply.
Click to expand...
Click to collapse
OK, I tried it again.
- In CWM Recovery, install from zip, chose 'vivo_signed_WWE_4.10.405.1_ICS_SENSE36_5.zip'
- It completed successfuly (rather quickly)
- extracted boot.img from that zip, places in adb/fastboot folder on PC
- Rebooted phone into bootloader USB
- On PC, executed 'fastboot boot boot.img'
C:\adb>fastboot boot boot.img
downloading 'boot.img'...
OKAY [ 1.328s]
booting...
OKAY [ 0.000s]
finished. total time: 1.328s
- it rebooted automatically, and now stuck on white HTC screen for last 10 minutes
jcr67 said:
OK, I tried it again.
- In CWM Recovery, install from zip, chose 'vivo_signed_WWE_4.10.405.1_ICS_SENSE36_5.zip'
- It completed successfuly (rather quickly)
- extracted boot.img from that zip, places in adb/fastboot folder on PC
- Rebooted phone into bootloader USB
- On PC, executed 'fastboot boot boot.img'
C:\adb>fastboot boot boot.img
downloading 'boot.img'...
OKAY [ 1.328s]
booting...
OKAY [ 0.000s]
finished. total time: 1.328s
- it rebooted automatically, and now stuck on white HTC screen for last 10 minutes
Click to expand...
Click to collapse
Instead of "fastboot boot boot.img"
it should be
"fastboot flash boot boot.img"
Try that and see how it goes
Cheers
Drugzy said:
Instead of "fastboot boot boot.img"
it should be
"fastboot flash boot boot.img"
Try that and see how it goes
Cheers
Click to expand...
Click to collapse
Aaaarghh....silly me
However, same result. Still white screen after 10min
C:\adb>fastboot flash boot boot.img
sending 'boot' (3824 KB)...
OKAY [ 1.187s]
writing 'boot'...
OKAY [ 1.234s]
finished. total time: 2.422s
jcr67 said:
Aaaarghh....silly me
However, same result. Still white screen after 10min
C:\adb>fastboot flash boot boot.img
sending 'boot' (3824 KB)...
OKAY [ 1.187s]
writing 'boot'...
OKAY [ 1.234s]
finished. total time: 2.422s
Click to expand...
Click to collapse
Well then you can always relock the bootloader and then run the 4.10.405.1 RUU like you did originally. Then you can unlock the bootloader since you already have the unlock_code.bin file.
tpbklake said:
Well then you can always relock the bootloader and then run the 4.10.405.1 RUU like you did originally. Then you can unlock the bootloader since you already have the unlock_code.bin file.
Click to expand...
Click to collapse
Then I will end up where I was in the first place? Oh well, at least I could use the phone.
Anyhow......
C:\adb>fastboot oem lock
...
(bootloader) Lock successfully...
FAILED (status read failed (Too many links))
finished. total time: 0.312s
HBOOT now says:
*** RELOCKED ***
*** Security Warning ***
jcr67 said:
Then I will end up where I was in the first place? Oh well, at least I could use the phone.
Anyhow......
C:\adb>fastboot oem lock
...
(bootloader) Lock successfully...
FAILED (status read failed (Too many links))
finished. total time: 0.312s
Click to expand...
Click to collapse
Once you get back to that point, unlock the bootloader, install ClockworkMod and then flash su-3.0.7-efghi.zip to root the official ROM. Then you should be able to rerun the downgrade process to get back to S-OFF.
Reinstall the HTC ruu
Sent from my HTC Raider X710e using xda app-developers app
tpbklake said:
Once you get back to that point, unlock the bootloader, install ClockworkMod and then flash su-3.0.7-efghi.zip to root the official ROM. Then you should be able to rerun the downgrade process to get back to S-OFF.
Click to expand...
Click to collapse
But my relock resulted in a security warning, as shown above. Are you telling me that's fine, and I can go ahead with RUU? Thanks
jcr67 said:
But my relock resulted in a security warning, as shown above. Are you telling me that's fine, and I can go ahead with RUU? Thanks
Click to expand...
Click to collapse
Yes you should be ok.
tpbklake said:
Yes you should be ok.
Click to expand...
Click to collapse
yep he will be , during my downgrade i had to relock with security warning and ruu fixed it all
tpbklake said:
Yes you should be ok.
Click to expand...
Click to collapse
Thanks very much. The stock ICS RUU has now installed successfully. I guess when I originally tried to reinstall it, I had left out the 'RELOCK' step, which is why it failed.
So now I am back to the start (stock ICS + HBOOT 2.02 S-ON), and want to get S-OFF and install your ROM zip. ,What I originally intended to do to get S-OFF was:
1) Unlock the bootloader, flash CWM Recovery, flash SU
2) Run downgrade GB RUU
3) S-off with Revolutionary
4) Install Blackrose HBOOT
5) Install your vivo_signed_WWE_4.10.405.1_ICS_SENSE36_5.zip
But step 2) failed with an unknown error. (I then tried to install your zip, and the rest is the sad history.....).
So what caused step 2 to fail? Did I need to relock the bootloader first?
Many thanks for your help, tpbklake
Did you use this script to downgrade and then flash gb ruu?
http://forum.xda-developers.com/showthread.php?t=1373697
If so run it and post up the results. It may not.be downgrading your mainver correctly.
Sent from my HTC Incredible S using xda app-developers app
Drugzy said:
Did you use this script to downgrade and then flash gb ruu?
http://forum.xda-developers.com/showthread.php?t=1373697
If so run it and post up the results. It may not.be downgrading your mainver correctly. p
Click to expand...
Click to collapse
That's it. HBOOT is remaining at 2.02.0002 after runme.cmd
Is the device rooted?
y OR n:y
Waiting for device to connect
Device found
Pushing misc_version
2455 KB/s (367096 bytes in 0.146s)
Correcting permissions
Downgrading main version
--set_version set. VERSION will be changed to: 2.00.000.0
Patching and backing up misc partition...
Error opening input file.
Cleaning temp files
Any ideas anyone?
What is the status of your bootloader? Is it locked, unlocked or relocked? If it is locked you may have to answer n to is the phone rooted to give temp root. If not on page 76 of this post there is the same issue.
http://forum.xda-developers.com/showthread.php?t=1373697
And fyi it will not change the h boot version, only the main ver which is reported at the end of the script.
Cheers
Sent from my HTC Incredible S using xda app-developers app
Drugzy said:
What is the status of your bootloader? Is it locked, unlocked or relocked? If it is locked you may have to answer n to is the phone rooted to give temp root. If not on page 76 of this post there is the same issue.
http://forum.xda-developers.com/showthread.php?t=1373697
And fyi it will not change the h boot version, only the main ver which is reported at the end of the script.
Cheers
Click to expand...
Click to collapse
No, I'm unlocked and rooted
Does the stock ruu have superuser installed? If it does I'm outta ideas.
Sent from my HTC Incredible S using xda app-developers app
---------- Post added at 07:58 PM ---------- Previous post was at 07:40 PM ----------
One more thing, I would try flashing another ROM, i came from Niks Sense 4a rom, and the script worked with no issues.
Remember you will need to manually flash the boot.img of the rom as you are S-ON.
jcr67 said:
No, I'm unlocked and rooted
Click to expand...
Click to collapse
Open a command window and then type in the command:
adb shell
If you get a # prompt then your ROM is rooted correctly and the script should run. If it doesn't then the ROM isn't properly rooted and the script will fail.
Hi -
Thanks for any help in advance. I'm a bit of a rookie round here, I've rooted and flashed my past 3 HTC phones but taken the easy route every time.
But today, I've used ADB commands to flash the revone binary and unlock and get s-off on my HTC one m7. It took me several tries, but it eventually worked (or at least said successful). So my HBOOT 1.44 says UNLOCKED & S-OFF.
So onto the next step. fastboot flash recovery recoverytwrp.img
...
Another success!
So, I reboot into bootloader and prompt recovery boot like I'm about to get HAM on twrp and flash some superuser files. It shows me a developer screen full of red print saying that it's booting into recovery, and then after a while, it just rebooted back into system.
It does this every time. I reflashed the image, I flashed the stock image, I tried the hansoon tool. each time I can't actually get into the recovery.
So this is where I'm stuck. Why can't I get anywhere with this?
EDIT & ANSWER;
Sprint phone needed Sprint TWRP image
Have you tried
fastboot erase cache
BenPope said:
Have you tried
fastboot erase cache
Click to expand...
Click to collapse
This.
Just do evrything again until you finish installing custom recoveries. Before rebooting, erase the cache with "fastboot erase cache"
ryryzz said:
This.
Just do evrything again until you finish installing custom recoveries. Before rebooting, erase the cache with "fastboot erase cache"
Click to expand...
Click to collapse
Gave that all a shot all over again. Still can't boot into recovery
Is fast boot off?
Use the original cable your One came with, go into bootloader power/vol - then open a cmd window
Now connect the One with your computer, don't use a USB 3.0 connection, and a different one then before.
In bootloader choose fastboot, that should change to fastboot USB
In cmd window point to your fastboot directory where you also copied the recovery to, I would try CWM touch for now.
Type cd c:\fastboot (or what your toolfolder is called)
fastboot erase cache
fastboot flash recovery recovery.img
fastboot erase cache
That installs the recovery, you can select it in bootloader abd boot into it.
Sent from my HTC One using xda premium
---------- Post added at 06:28 PM ---------- Previous post was at 06:23 PM ----------
BenPope said:
Is fast boot off?
Click to expand...
Click to collapse
You mean the fastboot option under Power Settings is unticked when booted up normally?
Sent from my HTC One using xda premium
hardstuffmuc said:
Use the original cable your One came with, go into bootloader power/vol - then open a cmd window
Now connect the One with your computer, don't use a USB 3.0 connection, and a different one then before.
In bootloader choose fastboot, that should change to fastboot USB
In cmd window point to your fastboot directory where you also copied the recovery to, I would try CWM touch for now.
Type cd c:\fastboot (or what your toolfolder is called)
fastboot erase cache
fastboot flash recovery recovery.img
fastboot erase cache
That installs the recovery, you can select it in bootloader abd boot into it.
Sent from my HTC One using xda premium
---------- Post added at 06:28 PM ---------- Previous post was at 06:23 PM ----------
You mean the fastboot option under Power Settings is unticked when booted up normally?
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Same deal. On it's way to booting into recovery it goes blank, resets and reboots into system
C:\adt\sdk\platform-tools>fastboot erase cache
erasing 'cache'...
OKAY [ 0.078s]
finished. total time: 0.078s
C:\adt\sdk\platform-tools>fastboot flash recovery recovery.img
sending 'recovery' (7422 KB)...
OKAY [ 1.139s]
writing 'recovery'...
OKAY [ 0.640s]
finished. total time: 1.778s
C:\adt\sdk\platform-tools>fastboot erase cache
erasing 'cache'...
OKAY [ 0.062s]
finished. total time: 0.062s
C:\adt\sdk\platform-tools>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.047s]
finished. total time: 0.047s
There's the last log - and then on it's way to recovery there's a red disclaimer and a pink text saying "Entering Recovery"...then after 20 seconds it resets
Did you try various recovery (versions) ? May be , you just have corrupted recovery image.
tash2013 said:
Did you try various recovery (versions) ? May be , you just have corrupted recovery image.
Click to expand...
Click to collapse
at this point I've tried stock, twrp and cwm. All with the same results
Jman12000 said:
at this point I've tried stock, twrp and cwm. All with the same results
Click to expand...
Click to collapse
Ok , I see mysterious problem ))
Try, remaining unlocked, go back to s-on (you can always take s-off again) and check your recovery (enter and flashing) under s-on.
tash2013 said:
Ok , I see mysterious problem ))
Try, remaining unlocked, go back to s-on (you can always take s-off again) and check your recovery (enter and flashing) under s-on.
Click to expand...
Click to collapse
Is that something I can do with the revone binary? To be honest, I have no idea how to turn security back on. I can relock it and that may be about it.
I stumbled upon another thread, shares a common theme as my issue, but with a different twist. Using a superboot.img as a rooting method instead of flashing it via recovery. It somewhere says that the boot.img needs to be flashed as well, however I can't find a decent boot.img to flash. The superboot tool seems like unproven territory right now.
Here's the other thread, I've leafed through it and found no determinable answer for my particular issue.
http://forum.xda-developers.com/showthread.php?p=39852757#post39852757
Do not apply revone to return s-on!
Use fastboot by "fastboot oem writesecureflag 3".
Be convinced that bootloader is unlocked before return to s-on.
Regarding your issue: I suspect that a certain code in HBOOT tries to install TAMPERED flag when sees custom recovery, but isn't able to do it correctly because s-off (bypassing security) and a certain mistake or exception conducts to reset phone.
Jman12000 said:
Hi -
Thanks for any help in advance. I'm a bit of a rookie round here, I've rooted and flashed my past 3 HTC phones but taken the easy route every time.
But today, I've used ADB commands to flash the revone binary and unlock and get s-off on my HTC one m7. It took me several tries, but it eventually worked (or at least said successful). So my HBOOT 1.44 says UNLOCKED & S-OFF.
So onto the next step. fastboot flash recovery recoverytwrp.img
...
Another success!
So, I reboot into bootloader and prompt recovery boot like I'm about to get HAM on twrp and flash some superuser files. It shows me a developer screen full of red print saying that it's booting into recovery, and then after a while, it just rebooted back into system.
It does this every time. I reflashed the image, I flashed the stock image, I tried the hansoon tool. each time I can't actually get into the recovery.
So this is where I'm stuck. Why can't I get anywhere with this?
Click to expand...
Click to collapse
try to install recovery again
you can download recovery from here
http://www.clockworkmod.com/rommanager
tash2013 said:
Do not apply revone to return s-on!
Use fastboot by "fastboot oem writesecureflag 3".
Be convinced that bootloader is unlocked before return to s-on.
Regarding your issue: I suspect that a certain code in HBOOT tries to install TAMPERED flag when sees custom recovery, but isn't able to do it correctly because s-off (bypassing security) and a certain mistake or exception conducts to reset phone.
Click to expand...
Click to collapse
Code:
C:\Users\Justin\Desktop\adt-bundle-windows-x86_64-20130522\sdk\platform-tools>ad
b reboot bootloader
C:\Users\Justin\Desktop\adt-bundle-windows-x86_64-20130522\sdk\platform-tools>fa
stboot oem writesecureflag 3
...
(bootloader) writesecureflag: partitions siganture pass
OKAY [ 1.665s]
finished. total time: 1.666s
C:\Users\Justin\Desktop\adt-bundle-windows-x86_64-20130522\sdk\platform-tools>fa
stboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.045s]
finished. total time: 0.046s
C:\Users\Justin\Desktop\adt-bundle-windows-x86_64-20130522\sdk\platform-tools>ad
b reboot bootloader
error: device not found
C:\Users\Justin\Desktop\adt-bundle-windows-x86_64-20130522\sdk\platform-tools>ad
b reboot bootloader
So here's where I'm at
Right now I've done all the above, I've got a *** TAMPERED *** and ***UNLOCKED*** and S-ON
I've been through 4 boots, 2 of them attempts to get to recovery. Now instead of recovery rebooting into system, it just shuts off now.
Where do you think I go from here?
I've just skimmed through the posts and didn't see this mentioned
If you are still able to boot into the system, download either GooManager (for TWRP) or RomManager (for CWM) and use either of those apps to install recovery. Once done, you can use the app to boot into recovery instead of the fancy ADB commands or button presses.
Jman12000 said:
So here's where I'm at
Right now I've done all the above, I've got a *** TAMPERED *** and ***UNLOCKED*** and S-ON
I've been through 4 boots, 2 of them attempts to get to recovery. Now instead of recovery rebooting into system, it just shuts off now.
Where do you think I go from here?
Click to expand...
Click to collapse
This topic seems like your problem :
http://forum.xda-developers.com/showthread.php?t=2328983&page=3
The man resolved this by flashing the same recovery many many times.
And more.. Please print here your recovery flashing process
tash2013 said:
This topic seems like your problem :
http://forum.xda-developers.com/showthread.php?t=2328983&page=3
The man resolved this by flashing the same recovery many many times.
And more.. Please print here your recovery flashing process
Click to expand...
Click to collapse
So both that method through ADB shell and GooManager require root. Every rooting method requires recovery, so I don't have perm root yet.
You quoted me, but answered not to me.
Read a post #26 from my link above
Possible Solution
Hello I have the same problem and the solution was:
1. Settings - Energy- Fastboot uncheked
2. Flash Recovery usin one all-in-one-kit
3. Erase Cache 3 times
4. Unplug to PC, and load into system normal
5. Turn off phone - via stock menu NOT FORCE TO OFF pressing the off button
6. Wait 2 minutes, and boot into HBOOT - Power + Volume(-) pressing
7. Choose recovery
Ready.. May these work for you! Let me know
Hi Everyone,
Don't know what I did wrong but at the moment i stucked with a bootloop. I was trying to flash a 4.4 Rom on a Cyanogenmod 4.2.2
Now I can enter in bootloader but not into the recovery. When I try to boot into recovery it simply tries to boot the phone.
Bootloader i unlocked (it says tampered) but S-ON.
Tried to fastboot the recovery of clockworkmod but still can't enter in it.
How I can restore the phone to its original factory image?
Thnaks
It's seems you are not the only one.
Enter bootloader and choose fastboot.
Then run a command prompt in your PC, cd to the fastboot folder and write fastboot flash recovery filename.img
I suggest you download and flash twrp 2.6.3.0
Then check if the recovery has been installed successfully.If yes, go into recovery and type in the command prompt in your PC the following:
Adb push filename.Rom /data/media/0
Filename.zip stands for the Rom you wanna flash. After its done you can flash that file with twrp
Sent from my HTC One using Tapatalk
I think the cache just needs wiping with the command:
fastboot erase cache
Worked for me once or twice
Sent from my HTC One using XDA Premium 4 mobile app
thanks guys,
as i said i already tried to flash the recovery with the fastboot flash command.
I tried CMW and TWRP... but still can't enter into the recovery.
I have to try the erase cache command....
will let you know!
Did you find a solution? I am in the same boat and it is actually quite annoying.
gerazzo said:
thanks guys,
as i said i already tried to flash the recovery with the fastboot flash command.
I tried CMW and TWRP... but still can't enter into the recovery.
I have to try the erase cache command....
will let you know!
Click to expand...
Click to collapse
The_Doctor_Who said:
Did you find a solution? I am in the same boat and it is actually quite annoying.
Click to expand...
Click to collapse
Yes solved for me with the erase cache command and fastboot recovery the latest TRWP
Than i flashed the AR ROM...
bye
gerazzo said:
Yes solved for me with the erase cache command and fastboot recovery the latest TRWP
Than i flashed the AR ROM...
bye
Click to expand...
Click to collapse
Thanks. Unfortunately I cannot boot in to the custom recovery. It skips the recovery and jumps directly to the google screen.
The_Doctor_Who said:
Thanks. Unfortunately I cannot boot in to the custom recovery. It skips the recovery and jumps directly to the google screen.
Click to expand...
Click to collapse
^^^^ fastboot erase cache will solve that
nkk71 said:
^^^^ fastboot erase cache will solve that
Click to expand...
Click to collapse
Unfortunately I've typed fastboot erase cache until I'm blue in the face and it still will not boot into the custom recovery. Trust me, I wish I could get it to work for me.
The_Doctor_Who said:
Unfortunately I've typed fastboot erase cache until I'm blue in the face and it still will not boot into the custom recovery. Trust me, I wish I could get it to work for me.
Click to expand...
Click to collapse
okay, i trust you, can i have a little info on your state:
hboot version
which recovery are you using (name and version please )
and you are unlocked right?
nkk71 said:
okay, i trust you, can i have a little info on your state:
hboot version
which recovery are you using (name and version please )
and you are unlocked right?
Click to expand...
Click to collapse
Sure! H-boot 1.54, s -On, I have tried both locked and unlocked (via fasboot oem lock and unlock). I originally tried CWM touch, then gave TWRP a try. No luck booting to either. I get success on the cmd with loading, but cannot get it into recovery. I select recovery from the fastboot menu and the phone vibrates, then a second later "Google" appears.
Version of recovery:
CWM 6.0.3.1 and and 6.0.4.3
TWRP: 2.6.6.3 m7
The_Doctor_Who said:
Sure! H-boot 1.54, s -On, I have tried both locked and unlocked (via fasboot oem lock and unlock). I originally tried CWM touch, then gave TWRP a try. No luck booting to either. I get success on the cmd with loading, but cannot get it into recovery. I select recovery from the fastboot menu and the phone vibrates, then a second later "Google" appears.
Click to expand...
Click to collapse
make sure bootloader is unlocked, reboot to booloader/FASTBOOT USB (again make sure the top line or 2nd says UNLOCKED), then get latest CWM (just for this exercise) from here: http://forum.xda-developers.com/showthread.php?t=2173863
fastboot erase cache
fastboot flash recovery recovery-clockwork-touch-6.0.4.5-m7ul.img
fastboot erase cache
fastboot reboot-bootloader
copy/paste command prompt output (all of it pls)
---> and try to enter recovery.
let me know what happens.
nkk71 said:
make sure bootloader is unlocked, reboot to booloader/FASTBOOT USB (again make sure the top line or 2nd says UNLOCKED), then get latest CWM (just for this exercise) from here: http://forum.xda-developers.com/showthread.php?t=2173863
fastboot erase cache
fastboot flash recovery recovery-clockwork-touch-6.0.4.5-m7ul.img
fastboot erase cache
fastboot reboot-bootloader
copy/paste command prompt output (all of it pls)
---> and try to enter recovery.
let me know what happens.
Click to expand...
Click to collapse
Sure. Thank you!
Here is my output:
c:\And>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.055s]
finished. total time: 0.056s
c:\And>fastboot flash recovery recovery-clockwork-touch-6.0.4.5-m7ul.img
target reported max download size of 1526722560 bytes
sending 'recovery' (8746 KB)...
OKAY [ 1.175s]
writing 'recovery'...
OKAY [ 0.675s]
finished. total time: 1.852s
c:\And>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.051s]
finished. total time: 0.051s
c:\And>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.042s]
finished. total time: 0.042s
Tried entering recovery. Black screen for a moment, vibration and then "Google"
The_Doctor_Who said:
Sure. Thank you!
Here is my output:
c:\And>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.055s]
finished. total time: 0.056s
c:\And>fastboot flash recovery recovery-clockwork-touch-6.0.4.5-m7ul.img
target reported max download size of 1526722560 bytes
sending 'recovery' (8746 KB)...
OKAY [ 1.175s]
writing 'recovery'...
OKAY [ 0.675s]
finished. total time: 1.852s
c:\And>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.051s]
finished. total time: 0.051s
c:\And>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.042s]
finished. total time: 0.042s
Tried entering recovery. Black screen for a moment, vibration and then "Google"
Click to expand...
Click to collapse
what is "******** Did you mean to fastboot format this partition?" how come I never get that
is your adb sdk newer or older than mine? I'm still using:
Code:
C:\ADB2>adb
Android Debug Bridge version 1.0.29
Question, are you on GPE hboot (the black one) or normal (the white one)?
nkk71 said:
what is "******** Did you mean to fastboot format this partition?" how come I never get that
is your adb sdk newer or older than mine? I'm still using:
Code:
C:\ADB2>adb
Android Debug Bridge version 1.0.29
Question, are you on GPE hboot (the black one) or normal (the white one)?
Click to expand...
Click to collapse
That's interesting. Here is mine:
c:\adb>adb
Android Debug Bridge version 1.0.26
I'm on the GPE black screen.
The_Doctor_Who said:
That's interesting. Here is mine:
c:\adb>adb
Android Debug Bridge version 1.0.26
I'm on the GPE black screen.
Click to expand...
Click to collapse
1- recommend updating adb sdk, mine isnt even the latest, i think latest is something like 1.0.3xx
2- don't know if this will work in GPE hboot, but try "fastboot boot <recovery>.img", it used to work on 1.44, but stopped on 1.54+, maybe on GPE it still works.
nkk71 said:
1- recommend updating adb sdk, mine isnt even the latest, i think latest is something like 1.0.3xx
2- don't know if this will work in GPE hboot, but try "fastboot boot <recovery>.img", it used to work on 1.44, but stopped on 1.54+, maybe on GPE it still works.[/QUOT
I'm updating now. I tried fastboot boot recovery yesterday and it froze the phone.
Click to expand...
Click to collapse
The_Doctor_Who said:
I'm updating now. I tried fastboot boot recovery yesterday and it froze the phone.
Click to expand...
Click to collapse
yeah, it was crapped in 1.54
i'm gonna have to sign off soon, but will check back tomorrow....
BTW: i wouldn't mind if you hit the thanks button on my posts (the useful ones!)
Cheers.
nkk71 said:
yeah, it was crapped in 1.54
i'm gonna have to sign off soon, but will check back tomorrow....
BTW: i wouldn't mind if you hit the thanks button on my posts (the useful ones!)
Cheers.
Click to expand...
Click to collapse
Of course! I appreciate your time today!
nkk71 said:
1- recommend updating adb sdk, mine isnt even the latest, i think latest is something like 1.0.3xx
2- don't know if this will work in GPE hboot, but try "fastboot boot <recovery>.img", it used to work on 1.44, but stopped on 1.54+, maybe on GPE it still works.
Click to expand...
Click to collapse
I think his recovery partition might be corrupt.. @mike1986. wrote an article about corrupt data partitions(http://android-revolution-hd.blogspot.ch/2013/10/fix-data-htc-one.html) I think it was you who sent me that link.. well.. do you know if it is possible to use some of this commands? But we'd have to get into a state where we can use adb..
I flashed the Android Wear 2.0 OTA update and now the watch won't boot. I get the "Device Software Can't Be Checked For Corruption" error and it's telling me to go to g.com/ABH.
It won't go into recovery mode, but will go into fastboot mode. I grabbed the stock images from here, and flashed the stock boot, system, and recovery imgs, but the error persists.
https://forum.xda-developers.com/ze...stock-zenwatch-3-partition-dump-boot-t3535589
Am I screwed? Or is there something I could do to recover?
Thanks.
Did you unlock the bootloader?
Verstuurd vanaf mijn Nexus 5X met Tapatalk
Wait for about 10 seconds when the warning appears. The watch will continue it's boot after 10 secs.
TonySuperPony said:
Did you unlock the bootloader?
Verstuurd vanaf mijn Nexus 5X met Tapatalk
Click to expand...
Click to collapse
I thought I had initially. I hadn't turned the watch on for a while, but decided to get it set up yesterday when I saw news of the 2.0 update hit. It originally had the first firmware on it and wouldn't update to 2.0 (adb would fail to find the watch).
So, I flashed MWF76 from the link in my earlier post. And that worked properly -- the watch booted normally, set up the apps, the right build number was showing, etc.
When that was done I tried to flash the 2.0 update again. And this time the watch was being recognized properly with adb. The flash procedure seemed to go without a hitch, but I got the g.co/ABH error on first boot.
And if you let the watch sit for 10 seconds, it only boots into Fastboot mode. You can't enter recovery. If you try to enter recovery with the vol-down+power button combo, you see recovery for a split second and then it goes right to fastboot.
At the moment it appears the bootloader is locked again.
Still experimenting. Hoping someone with more knowledge may be able to help.
Fastboot oem unlock reports that the bootloader is already unlocked.
Tried flashing all of the IMGs in MFW76 and these flash successfully:
boot
system
recovery
modem
asusfw
But when trying to flash these, the flash fails because it says the bootloader is locked. Trying fastboot oem unlock again reports the bootloader is unlocked, but still can not flash these...
devinfo
factory
misc
modemst1
modemst2
oem
splash
Tried fastboot flashing unlock_critical, and the watch shows part of a message, but I can't see if there's anything to do on...pressing the top or bottom buttons changes the color of the bg.
Go into bootloader, unlock bl, flash everything and then reboot back into bootloader and lock it.
yilun said:
Go into bootloader, unlock bl, flash everything and then reboot back into bootloader and lock it.
Click to expand...
Click to collapse
Thanks for the help -- tried this and still no luck.
Since I can't get into recovery mode and use adb to try reflashing 2.0, would it be possible to create a flashable .ZIP file from the 2.0 update that can be flashed from Fastboot mode?
re: flashable AW 2.0 zip file
BigWopHH said:
Thanks for the help -- tried this and still no luck.
Since I can't get into recovery mode and use adb to try reflashing 2.0, would it be possible to create a flashable .ZIP file from the 2.0 update that can be flashed from Fastboot mode?
Click to expand...
Click to collapse
Here is the OTA flashable android wear 2.0 zip file
which you can flash in FASTBOOT.
https://android.googleapis.com/pack.../9ff6d27ebfc20bf885f21ce9386c4b16018a7eff.zip
Good luck, have a great day!
Misterjunky said:
Here is the OTA flashable android wear 2.0 zip file
which you can flash in FASTBOOT.
https://android.googleapis.com/pack.../9ff6d27ebfc20bf885f21ce9386c4b16018a7eff.zip
Good luck, have a great day!
Click to expand...
Click to collapse
That's the same file that's been shared repeatedly; it requires flashing in recovery mode using adb. If you try to flash this with fastboot, you get an error that says "update package xxx.zip has no andriod-info.txt"
re: adb sideload
BigWopHH said:
That's the same file that's been shared repeatedly; it requires flashing in recovery mode using adb. If you try to flash this with fastboot, you get an error that says "update package xxx.zip has no andriod-info.txt"
Click to expand...
Click to collapse
Your right, this file is not fastboot compatible. (my error)
This is what I used and flashed when I upgraded to v2.0 Android Wear.
To flash this you need to use ADB SIDELOAD filename.zip.
OR if you can boot into twrp you can install it from there too.
Good luck, have a great day!
Misterjunky said:
Your right, this file is not fastboot compatible. (my error)
This is what I used and flashed when I upgraded to v2.0 Android Wear.
To flash this you need to use ADB SIDELOAD filename.zip.
OR if you can boot into twrp you can install it from there too.
Good luck, have a great day!
Click to expand...
Click to collapse
That's exactly what I had done initially and what ultimately bricked the watched. Can't boot into any recovery, unfortunately. Just boots directly to Fastboot mode.
BigWopHH said:
That's exactly what I had done initially and what ultimately bricked the watched. Can't boot into any recovery, unfortunately. Just boots directly to Fastboot mode.
Click to expand...
Click to collapse
I'd try to get the watch running 1.5 first via fastboot.
See my post in the other thread linked here, specifically my edits.
I did boot, recovery, then system, and did "fastboot format userdata" instead of "fastboot erase userdata"
I have the same issue. Zenwatch 3 just boots to Fastboot Mode after manual update to Android Wear 2.0 . I can`t enter recovery mode and try to reflash it.
Do you have any ideas, what should I do?
re: not booting properly
AndyKir said:
I have the same issue. Zenwatch 3 just boots to Fastboot Mode after manual update to Android Wear 2.0 . I can`t enter recovery mode and try to reflash it.
Do you have any ideas, what should I do?
Click to expand...
Click to collapse
You need to flash stock kernel in fastboot before you can do anything else.
( FASTBOOT FLASH BOOT BOOT.IMG )
Here is the the link to the stock Android Wear 1.5 boot.img
https://www.dropbox.com/s/dudeyq9rjsrag2i/boot.img?dl=0
(The boot.img is the kernel)
If worse comes to worse, you need to flash full android wear stock 1.5 firmware to get your watch working.
Here are the full instructions how to go back to go back to stock android wear v1.5 firmware.
This link also contains the download link for the full android wear original stock v1.5 firmware:
https://forum.xda-developers.com/zenwatch-3/how-to/guide-how-to-revert-to-android-wear-1-5-t3635196
First simply try to flash the boot.img in fastboot and reboot the watch before flashing the stock 1.5 firmware.
::: fastboot flash boot boot.img :::
Good luck, have a great day!
Misterjunky said:
You need to flash stock kernel in fastboot before you can do anything else.
( FASTBOOT FLASH BOOT BOOT.IMG )
Here is the the link to the stock Android Wear 1.5 boot.img
https://www.dropbox.com/s/dudeyq9rjsrag2i/boot.img?dl=0
(The boot.img is the kernel)
If worse comes to worse, you need to flash full android wear stock 1.5 firmware to get your watch working.
Here are the full instructions how to go back to go back to stock android wear v1.5 firmware.
This link also contains the download link for the full android wear original stock v1.5 firmware:
https://forum.xda-developers.com/zenwatch-3/how-to/guide-how-to-revert-to-android-wear-1-5-t3635196
First simply try to flash the boot.img in fastboot and reboot the watch before flashing the stock 1.5 firmware.
::: fastboot flash boot boot.img :::
Good luck, have a great day!
Click to expand...
Click to collapse
Thank you for your reply, but it doesn`t help!
I have got the same issue as the topicstarter had. Flashing to the STOCK firmware doesn`t do anything. It stills shows Getting g.co/ABH Error on Boot and after 10 seconds it goes to Fastboot mode.
AndyKir said:
Thank you for your reply, but it doesn`t help!
I have got the same issue as the topicstarter had. Flashing to the STOCK firmware doesn`t do anything. It stills shows Getting g.co/ABH Error on Boot and after 10 seconds it goes to Fastboot mode.
Click to expand...
Click to collapse
Your bootkoader is unlocked...
After using fastboot before reboot you need to lock the bootloadet by using.the command below.
FASTBOOT OEM LOCK
Then you can boot successfully ..
The error message you saw is normal if you have not locked your bootloader.
Good luck.. Have a great day.
Misterjunky said:
Your bootkoader is unlocked...
After using fastboot before reboot you need to lock the bootloadet by using.the command below.
FASTBOOT OEM LOCK
Then you can boot successfully ..
The error message you saw is normal if you have not locked your bootloader.
Good luck.. Have a great day.
Click to expand...
Click to collapse
Sorry but this doesn`t help.
My watches are booting only in Fastboot mode.
So i do next steps:
fastboot oem unlock
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot format userdata
fastboot oem lock
fastboot reboot
After reboot, watches still boots straight in Fastboot mode.
Maybe I should flash something from AW 2.0 to repair the watch ?
re: fastboot bootup
AndyKir said:
Sorry but this doesn`t help.
My watches are booting only in Fastboot mode.
So i do next steps:
fastboot oem unlock
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot format userdata
fastboot oem lock
fastboot reboot
After reboot, watches still boots straight in Fastboot mode.
Maybe I should flash something from AW 2.0 to repair the watch ?
Click to expand...
Click to collapse
You must have flashed the wrong boot.img (which is the kernel)
Make 100% sure that you are flashing the correct kernel and
don't issue the command "fastboot format userdata".
All you need is:
fastboot oem unlock
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
then oem lock bootloader
What was the exact filename of the ziip file
which had the 3 IMG files in it?
Here is the link for the zip file which contains the correct IMG files in it:
https://www.dropbox.com/s/tz9bg5fggpfn2q6/swift_partition_dump_part1_MWG68.zip?dl=1
unlock bootloader, flash the three img files, lock bootloader
and issue this fastboot command: " fastboot reboot "
Don't flash anything else and don't format anything...
Good luck, have a great day!
Misterjunky, thank you for your replies!
I`ve downloaded your files from Dropbox, put it in c:\adb\correct\ folder, and run next commands in PowerShell
PS C:\adb> fastboot oem unlock
...
(bootloader) The bootloader is already unlocked!
OKAY [ 0.006s]
finished. total time: 0.007s
PS C:\adb> fastboot flash boot C:\adb\correct\boot.img
target reported max download size of 262144000 bytes
sending 'boot' (32768 KB)...
OKAY [ 1.038s]
writing 'boot'...
OKAY [ 3.222s]
finished. total time: 4.263s
PS C:\adb> fastboot flash recovery C:\adb\correct\recovery.img
target reported max download size of 262144000 bytes
sending 'recovery' (32768 KB)...
OKAY [ 1.043s]
writing 'recovery'...
OKAY [ 3.150s]
finished. total time: 4.195s
PS C:\adb> fastboot flash system C:\adb\correct\system.img
target reported max download size of 262144000 bytes
erasing 'system'...
OKAY [ 1.134s]
sending sparse 'system' (254201 KB)...
OKAY [ 8.468s]
writing 'system'...
OKAY [ 26.695s]
sending sparse 'system' (149469 KB)...
OKAY [ 5.016s]
writing 'system'...
OKAY [114.570s]
finished. total time: 155.890s
PS C:\adb> fastboot oem lock
...
(bootloader) Locking bootloader...
(bootloader) Device Locked!
(bootloader) Locking bootloader done!
OKAY [ 0.023s]
finished. total time: 0.024s
PS C:\adb> fastboot reboot
rebooting...
finished. total time: 0.008s
PS C:\adb>
After reboot, I still in Fastboot mode - nothing is changed.
Help.
After Root and Flash Rom on my mobile phone, sim card dont accept pin... Every Said, " incorrecly PIN" .
I try to see IMEI and i lose imei. How do repair ?
https://ibb.co/Lz57RnL
leandroogaby said:
Help.
After Root and Flash Rom on my mobile phone, sim card dont accept pin... Every Said, " incorrecly PIN" .
I try to see IMEI and i lose imei. How do repair ?
https://ibb.co/Lz57RnL
Click to expand...
Click to collapse
Your IMEI's are on the side of your retail box.
Fixing your phone is a different matter.
nabbed said:
Your IMEI's are on the side of your retail box.
Fixing your phone is a different matter.
Click to expand...
Click to collapse
yes, whats solution ?! i restore rom 3 times
leandroogaby said:
yes, whats solution ?! i restore rom 3 times
Click to expand...
Click to collapse
Return phone to vendor.
nabbed said:
Return phone to vendor.
Click to expand...
Click to collapse
It has to be another solution.
AFAIK you would have to back up your EFS partition prior to any kind of alteration..
At least that's how things used to work..
Even the OnePlus 5 I had to do it. Just incase.
I did have the same issue happen to me on my old Sony z1 but after returning to a stock ROM, it put the IMEI back from 00000000000
If you didn't back up the partition then you may be screwed.
Unless there's a way to edit an already backed up EFS partition and then edit it to reflect yours then restore it.
PS: you can find yours on the box.
dladz said:
AFAIK you would have to back up your EFS partition prior to any kind of alteration..
At least that's how things used to work..
Even the OnePlus 5 I had to do it. Just incase.
I did have the same issue happen to me on my old Sony z1 but after returning to a stock ROM, it put the IMEI back from 00000000000
If you didn't back up the partition then you may be screwed.
Unless there's a way to edit an already backed up EFS partition and then edit it to reflect yours then restore it.
PS: you can find yours on the box.
Click to expand...
Click to collapse
i don't have efs folder, i see very tutorials, and all don't fix.
leandroogaby said:
i don't have efs folder, i see very tutorials, and all don't fix.
Click to expand...
Click to collapse
Then perhaps the process has changed.
But backing up isn't like copying a folder.
You wouldn't be able to just see the EFS folder like DCIM or Downloads.
You've very few options left, google is your friend at this point.
My experience with IMEI's going mental i've already posted mate, sorry.
dladz said:
Then perhaps the process has changed.
But backing up isn't like copying a folder.
You wouldn't be able to just see the EFS folder like DCIM or Downloads.
You've very few options left, google is your friend at this point.
My experience with IMEI's going mental i've already posted mate, sorry.
Click to expand...
Click to collapse
more people ?!!! i need help
leandroogaby said:
more people ?!!! i need help
Click to expand...
Click to collapse
Did you flash a stock firmware? Did you try anything I said?
dladz said:
Did you flash a stock firmware? Did you try anything I said?
Click to expand...
Click to collapse
After i i flash custom rom the i cant turn on the wifi so i decided to reset factory of my red magic 3 but after a rest i got stuck in FASTBOOT MODE no matter what i choice from reboot from recovery mode or reboot from system it will just restart and back again to FASTBOOT MODE.
THEN I TRY FLASH STOCK ROM USING :
• fastboot oem nubia_unlock NUBIA_NX629J
• fastboot flash parameter parameter.img
• fastboot reboot bootloader
• fastboot oem nubia_unlock NUBIA_NX629J
• fastboot flash boot boot.img
• fastboot flash recovery recovery.img
• fastboot flash splash splash.img
• fastboot flash modem NON-HLOS.bin
• fastboot flash system system.img
• fastboot flash dsp dspso.bin
• fastboot oem nubia_lock NUBIA_NX629J
• fastboot reboot
but, when i flash system.img, in step 5/5 give me error
C:\Program Files (x86)\Minimal ADB and Fastboot\NX629J_Z69_EN_WPJ0O_V209>fastboot flash system system.img
target reported max download size of 805306368 bytes
Invalid sparse file format at header magic
erasing 'system'...
OKAY [ 0.016s]
sending sparse 'system' 1/5 (768623 KB)...
OKAY [ 26.609s]
writing 'system' 1/5...
OKAY [ 0.010s]
sending sparse 'system' 2/5 (753639 KB)...
OKAY [ 31.166s]
writing 'system' 2/5...
OKAY [ 0.010s]
sending sparse 'system' 3/5 (776366 KB)...
OKAY [ 32.717s]
writing 'system' 3/5...
OKAY [ 0.008s]
sending sparse 'system' 4/5 (786429 KB)...
OKAY [ 32.807s]
writing 'system' 4/5...
OKAY [ 0.004s]
sending sparse 'system' 5/5 (138400 KB)...
FAILED (data write failure (Unknown error))
finished. total time: 136.141s
Click to expand...
Click to collapse
i try using 2.0 usb port and another cable, and don't work.
leandroogaby said:
After i i flash custom rom the i cant turn on the wifi so i decided to reset factory of my red magic 3 but after a rest i got stuck in FASTBOOT MODE no matter what i choice from reboot from recovery mode or reboot from system it will just restart and back again to FASTBOOT MODE.
THEN I TRY FLASH STOCK ROM USING :
• fastboot oem nubia_unlock NUBIA_NX629J
• fastboot flash parameter parameter.img
• fastboot reboot bootloader
• fastboot oem nubia_unlock NUBIA_NX629J
• fastboot flash boot boot.img
• fastboot flash recovery recovery.img
• fastboot flash splash splash.img
• fastboot flash modem NON-HLOS.bin
• fastboot flash system system.img
• fastboot flash dsp dspso.bin
• fastboot oem nubia_lock NUBIA_NX629J
• fastboot reboot
but, when i flash system.img, in step 5/5 give me error
i try using 2.0 usb port and another cable, and don't work.
Click to expand...
Click to collapse
I had this issue earlier today, instead of flashing system.img that way, do this instead:
fastboot flash -S 100M system system.img
This worked for me, may take a while as it splits it into several chunks which have a lot less chance of being corrupt.
johnnio said:
i had this issue earlier today, instead of flashing system.img that way, do this instead:
Fastboot flash -s 100m system system.img
this worked for me, may take a while as it splits it into several chunks which have a lot less chance of being corrupt.
Click to expand...
Click to collapse
omg thanksssssssss work :d
leandroogaby said:
omg thanksssssssss work :d
Click to expand...
Click to collapse
Glad to help
Johnnio said:
Glad to help
Click to expand...
Click to collapse
I was able to install the ROM, but the Sim Card still doesn't work
leandroogaby said:
omg thanksssssssss work :d
Click to expand...
Click to collapse
Superb..
Great stuff.
Ps: lol dude you haven't given one thanks?? That's savage
leandroogaby said:
I was able to install the ROM, but the Sim Card still doesn't work
Click to expand...
Click to collapse
I'm afraid that I don't have much experience with this particular phone, only had it a couple of days.
What I did to flash mine is the following but I'm not sure if this will solve your issue, make sure to do this in the following order.
fastboot oem nubia_unlock NUBIA_NX629J
Fastboot erase boot
Fastboot erase recovery
Fastboot erase system
Fastboot erase userdata
Fastboot erase cache
Fastboot erase data
fastboot erase modem
fastboot erase dsp
fastboot erase vbmeta
fastboot erase dtbo
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash dtbo dtbo.img
fastboot flash dsp dspso.bin
Fastboot flash -S 100m system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
For the files, I used the latest Chinese rom and system.img uploaded by a user to mega, I can link this if needed. Then using an otg cable I booted into recovery then wiped data and cache then flashed the latest eu rom.
Again I do not know if this will solve your issue as I didn't encounter it myself.
Johnnio said:
I'm afraid that I don't have much experience with this particular phone, only had it a couple of days.
What I did to flash mine is the following but I'm not sure if this will solve your issue, make sure to do this in the following order.
fastboot oem nubia_unlock NUBIA_NX629J
Fastboot erase boot
Fastboot erase recovery
Fastboot erase system
Fastboot erase userdata
Fastboot erase cache
Fastboot erase data
fastboot erase modem
fastboot erase dsp
fastboot erase vbmeta
fastboot erase dtbo
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash dtbo dtbo.img
fastboot flash dsp dspso.bin
Fastboot flash -S 100m system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
For the files, I used the latest Chinese rom and system.img uploaded by a user to mega, I can link this if needed. Then using an otg cable I booted into recovery then wiped data and cache then flashed the latest eu rom.
Again I do not know if this will solve your issue as I didn't encounter it myself.
Click to expand...
Click to collapse
Press
*#06#
It'll probably be 0000000000000
Looking to be an RMA mate
dladz said:
Press
*#06#
It'll probably be 0000000000000
Looking to be an RMA mate
Click to expand...
Click to collapse
Most likely unfortunately, any idea how this happened to him, I'd really like to avoid it myself. Anyway to backup what ever has been deleted or corrupted?
Johnnio said:
Most likely unfortunately, any idea how this happened to him, I'd really like to avoid it myself. Anyway to backup what ever has been deleted or corrupted?
Click to expand...
Click to collapse
when i put *#06# i see:
IMEI1
NULL
IMEI2
NULL
MEID
NULL