Help.
After Root and Flash Rom on my mobile phone, sim card dont accept pin... Every Said, " incorrecly PIN" .
I try to see IMEI and i lose imei. How do repair ?
https://ibb.co/Lz57RnL
leandroogaby said:
Help.
After Root and Flash Rom on my mobile phone, sim card dont accept pin... Every Said, " incorrecly PIN" .
I try to see IMEI and i lose imei. How do repair ?
https://ibb.co/Lz57RnL
Click to expand...
Click to collapse
Your IMEI's are on the side of your retail box.
Fixing your phone is a different matter.
nabbed said:
Your IMEI's are on the side of your retail box.
Fixing your phone is a different matter.
Click to expand...
Click to collapse
yes, whats solution ?! i restore rom 3 times
leandroogaby said:
yes, whats solution ?! i restore rom 3 times
Click to expand...
Click to collapse
Return phone to vendor.
nabbed said:
Return phone to vendor.
Click to expand...
Click to collapse
It has to be another solution.
AFAIK you would have to back up your EFS partition prior to any kind of alteration..
At least that's how things used to work..
Even the OnePlus 5 I had to do it. Just incase.
I did have the same issue happen to me on my old Sony z1 but after returning to a stock ROM, it put the IMEI back from 00000000000
If you didn't back up the partition then you may be screwed.
Unless there's a way to edit an already backed up EFS partition and then edit it to reflect yours then restore it.
PS: you can find yours on the box.
dladz said:
AFAIK you would have to back up your EFS partition prior to any kind of alteration..
At least that's how things used to work..
Even the OnePlus 5 I had to do it. Just incase.
I did have the same issue happen to me on my old Sony z1 but after returning to a stock ROM, it put the IMEI back from 00000000000
If you didn't back up the partition then you may be screwed.
Unless there's a way to edit an already backed up EFS partition and then edit it to reflect yours then restore it.
PS: you can find yours on the box.
Click to expand...
Click to collapse
i don't have efs folder, i see very tutorials, and all don't fix.
leandroogaby said:
i don't have efs folder, i see very tutorials, and all don't fix.
Click to expand...
Click to collapse
Then perhaps the process has changed.
But backing up isn't like copying a folder.
You wouldn't be able to just see the EFS folder like DCIM or Downloads.
You've very few options left, google is your friend at this point.
My experience with IMEI's going mental i've already posted mate, sorry.
dladz said:
Then perhaps the process has changed.
But backing up isn't like copying a folder.
You wouldn't be able to just see the EFS folder like DCIM or Downloads.
You've very few options left, google is your friend at this point.
My experience with IMEI's going mental i've already posted mate, sorry.
Click to expand...
Click to collapse
more people ?!!! i need help
leandroogaby said:
more people ?!!! i need help
Click to expand...
Click to collapse
Did you flash a stock firmware? Did you try anything I said?
dladz said:
Did you flash a stock firmware? Did you try anything I said?
Click to expand...
Click to collapse
After i i flash custom rom the i cant turn on the wifi so i decided to reset factory of my red magic 3 but after a rest i got stuck in FASTBOOT MODE no matter what i choice from reboot from recovery mode or reboot from system it will just restart and back again to FASTBOOT MODE.
THEN I TRY FLASH STOCK ROM USING :
• fastboot oem nubia_unlock NUBIA_NX629J
• fastboot flash parameter parameter.img
• fastboot reboot bootloader
• fastboot oem nubia_unlock NUBIA_NX629J
• fastboot flash boot boot.img
• fastboot flash recovery recovery.img
• fastboot flash splash splash.img
• fastboot flash modem NON-HLOS.bin
• fastboot flash system system.img
• fastboot flash dsp dspso.bin
• fastboot oem nubia_lock NUBIA_NX629J
• fastboot reboot
but, when i flash system.img, in step 5/5 give me error
C:\Program Files (x86)\Minimal ADB and Fastboot\NX629J_Z69_EN_WPJ0O_V209>fastboot flash system system.img
target reported max download size of 805306368 bytes
Invalid sparse file format at header magic
erasing 'system'...
OKAY [ 0.016s]
sending sparse 'system' 1/5 (768623 KB)...
OKAY [ 26.609s]
writing 'system' 1/5...
OKAY [ 0.010s]
sending sparse 'system' 2/5 (753639 KB)...
OKAY [ 31.166s]
writing 'system' 2/5...
OKAY [ 0.010s]
sending sparse 'system' 3/5 (776366 KB)...
OKAY [ 32.717s]
writing 'system' 3/5...
OKAY [ 0.008s]
sending sparse 'system' 4/5 (786429 KB)...
OKAY [ 32.807s]
writing 'system' 4/5...
OKAY [ 0.004s]
sending sparse 'system' 5/5 (138400 KB)...
FAILED (data write failure (Unknown error))
finished. total time: 136.141s
Click to expand...
Click to collapse
i try using 2.0 usb port and another cable, and don't work.
leandroogaby said:
After i i flash custom rom the i cant turn on the wifi so i decided to reset factory of my red magic 3 but after a rest i got stuck in FASTBOOT MODE no matter what i choice from reboot from recovery mode or reboot from system it will just restart and back again to FASTBOOT MODE.
THEN I TRY FLASH STOCK ROM USING :
• fastboot oem nubia_unlock NUBIA_NX629J
• fastboot flash parameter parameter.img
• fastboot reboot bootloader
• fastboot oem nubia_unlock NUBIA_NX629J
• fastboot flash boot boot.img
• fastboot flash recovery recovery.img
• fastboot flash splash splash.img
• fastboot flash modem NON-HLOS.bin
• fastboot flash system system.img
• fastboot flash dsp dspso.bin
• fastboot oem nubia_lock NUBIA_NX629J
• fastboot reboot
but, when i flash system.img, in step 5/5 give me error
i try using 2.0 usb port and another cable, and don't work.
Click to expand...
Click to collapse
I had this issue earlier today, instead of flashing system.img that way, do this instead:
fastboot flash -S 100M system system.img
This worked for me, may take a while as it splits it into several chunks which have a lot less chance of being corrupt.
johnnio said:
i had this issue earlier today, instead of flashing system.img that way, do this instead:
Fastboot flash -s 100m system system.img
this worked for me, may take a while as it splits it into several chunks which have a lot less chance of being corrupt.
Click to expand...
Click to collapse
omg thanksssssssss work :d
leandroogaby said:
omg thanksssssssss work :d
Click to expand...
Click to collapse
Glad to help
Johnnio said:
Glad to help
Click to expand...
Click to collapse
I was able to install the ROM, but the Sim Card still doesn't work
leandroogaby said:
omg thanksssssssss work :d
Click to expand...
Click to collapse
Superb..
Great stuff.
Ps: lol dude you haven't given one thanks?? That's savage
leandroogaby said:
I was able to install the ROM, but the Sim Card still doesn't work
Click to expand...
Click to collapse
I'm afraid that I don't have much experience with this particular phone, only had it a couple of days.
What I did to flash mine is the following but I'm not sure if this will solve your issue, make sure to do this in the following order.
fastboot oem nubia_unlock NUBIA_NX629J
Fastboot erase boot
Fastboot erase recovery
Fastboot erase system
Fastboot erase userdata
Fastboot erase cache
Fastboot erase data
fastboot erase modem
fastboot erase dsp
fastboot erase vbmeta
fastboot erase dtbo
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash dtbo dtbo.img
fastboot flash dsp dspso.bin
Fastboot flash -S 100m system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
For the files, I used the latest Chinese rom and system.img uploaded by a user to mega, I can link this if needed. Then using an otg cable I booted into recovery then wiped data and cache then flashed the latest eu rom.
Again I do not know if this will solve your issue as I didn't encounter it myself.
Johnnio said:
I'm afraid that I don't have much experience with this particular phone, only had it a couple of days.
What I did to flash mine is the following but I'm not sure if this will solve your issue, make sure to do this in the following order.
fastboot oem nubia_unlock NUBIA_NX629J
Fastboot erase boot
Fastboot erase recovery
Fastboot erase system
Fastboot erase userdata
Fastboot erase cache
Fastboot erase data
fastboot erase modem
fastboot erase dsp
fastboot erase vbmeta
fastboot erase dtbo
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash dtbo dtbo.img
fastboot flash dsp dspso.bin
Fastboot flash -S 100m system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
For the files, I used the latest Chinese rom and system.img uploaded by a user to mega, I can link this if needed. Then using an otg cable I booted into recovery then wiped data and cache then flashed the latest eu rom.
Again I do not know if this will solve your issue as I didn't encounter it myself.
Click to expand...
Click to collapse
Press
*#06#
It'll probably be 0000000000000
Looking to be an RMA mate
dladz said:
Press
*#06#
It'll probably be 0000000000000
Looking to be an RMA mate
Click to expand...
Click to collapse
Most likely unfortunately, any idea how this happened to him, I'd really like to avoid it myself. Anyway to backup what ever has been deleted or corrupted?
Johnnio said:
Most likely unfortunately, any idea how this happened to him, I'd really like to avoid it myself. Anyway to backup what ever has been deleted or corrupted?
Click to expand...
Click to collapse
when i put *#06# i see:
IMEI1
NULL
IMEI2
NULL
MEID
NULL
Related
Hi,
My Moto G phone was running really slow for a month or so, so i wanted to upgrade my phone to custom firmware.
I unlocked bootloader from motorolas official website without no hassle.
I installed recovery, fine.
But when it came down to installing the rom, i got an error saying my bootloader version was below the required one. I tried to update it but couldn't find
the one for my model, stupidly, very very very stupidly i flashed one from a different version of a moto g 2014, don't ask me why, Im thick, i know.
So now all i have is a phone what hangs on the Motorola BootUnlocker warning screen and what boots into recovery with very very limited usable options.
I can still enter fastboot mode.
What are my options here, if maybe I could get the right bootloader files for my phone, could that fix the problem?
If so, does anyone know how to obtain them or maybe have them what they can upload.
Thanks.
Any help or suggestions greatly appreciated
mawigg2015 said:
Hi,
My Moto G phone was running really slow for a month or so, so i wanted to upgrade my phone to custom firmware.
I unlocked bootloader from motorolas official website without no hassle.
I installed recovery, fine.
But when it came down to installing the rom, i got an error saying my bootloader version was below the required one. I tried to update it but couldn't find
the one for my model, stupidly, very very very stupidly i flashed one from a different version of a moto g 2014, don't ask me why, Im thick, i know.
So now all i have is a phone what hangs on the Motorola BootUnlocker warning screen and what boots into recovery with very very limited usable options.
I can still enter fastboot mode.
What are my options here, if maybe I could get the right bootloader files for my phone, could that fix the problem?
If so, does anyone know how to obtain them or maybe have them what they can upload.
Thanks.
Any help or suggestions greatly appreciated
Click to expand...
Click to collapse
Try to see here:
http://forum.xda-developers.com/moto-g-2014/general/guide-restore-moto-e-2015-stock-firmware-t3054303
Surely I would need the files for a moto g not a moto e?
mawigg2015 said:
Surely I would need the files for a moto g not a moto e?
Click to expand...
Click to collapse
No it's for your phone.
Try also here for your firmware:
http://forum.xda-developers.com/moto-g-2014/development/stock-firmware-images-4g-3g-variants-t3065433/
thank you very much,
would you tell me how would I get this on my phone, my phone doesn't even boot up and doesn't act as a usb storage device so I can't transfer the file.
Could you tell me how to do via fast boot please,
Also would this sort the bootloader out as well because i installed the wrong one for the phone,
thanks again
mawigg2015 said:
thank you very much,
would you tell me how would I get this on my phone, my phone doesn't even boot up and doesn't act as a usb storage device so I can't transfer the file.
Could you tell me how to do via fast boot please,
Also would this sort the bootloader out as well because i installed the wrong one for the phone,
thanks again
Click to expand...
Click to collapse
You said that you are able to enter in fastboot mode.
So, go in fastboot mode (power button + vol -) and then you can flash your proper firmware.
Make sure you have installed the drivers and mfastboot works (this is motorola's fastboot command, so you need this for flashing the firmware).
On fastboot mode you must type these commands:
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
Anyway on the first link that a posted you there's a good description and you can find also the drivers
hi, i get this error
C:\Users\MAWiggKTA\Desktop\Minimal ADB and Fastboot>mfastboot flash partition gp
t.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.028s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.374s
and this one
C:\Users\MAWiggKTA\Desktop\Minimal ADB and Fastboot>mfastboot flash bootloader b
ootloader.img
target max-sparse-size: 256MB
error: cannot load 'bootloader.img': No error
dani.galla said:
You said that you are able to enter in fastboot mode.
So, go in fastboot mode (power button + vol -) and then you can flash your proper firmware.
Make sure you have installed the drivers and mfastboot works (this is motorola's fastboot command, so you need this for flashing the firmware).
On fastboot mode you must type these commands:
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
Anyway on the first link that a posted you there's a good description and you can find also the drivers
Click to expand...
Click to collapse
hi, i get this error
C:\Users\MAWiggKTA\Desktop\Minimal ADB and Fastboot>mfastboot flash partition gp
t.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.028s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.374s
and this one
C:\Users\MAWiggKTA\Desktop\Minimal ADB and Fastboot>mfastboot flash bootloader b
ootloader.img
target max-sparse-size: 256MB
error: cannot load 'bootloader.img': No error
mawigg2015 said:
hi, i get this error
C:\Users\MAWiggKTA\Desktop\Minimal ADB and Fastboot>mfastboot flash partition gp
t.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.028s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.374s
and this one
C:\Users\MAWiggKTA\Desktop\Minimal ADB and Fastboot>mfastboot flash bootloader b
ootloader.img
target max-sparse-size: 256MB
error: cannot load 'bootloader.img': No error
Click to expand...
Click to collapse
Have you restarted it?
What do you mean by restart? Thanks
Sent from my ASUS_T00P using XDA Free mobile app
mawigg2015 said:
What do you mean by restart? Thanks
Sent from my ASUS_T00P using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried to boot the phone?
I didn't complete the flash due to errors so it still won't work. Thanks. Any help regarding the errors. Thank you
mawigg2015 said:
I didn't complete the flash due to errors so it still won't work. Thanks. Any help regarding the errors. Thank you
Click to expand...
Click to collapse
The prevalidation it's not an important error. The other one is the first time I read it.
If you want try to flash everything and try booting, or wait someone else answer you.
dani.galla said:
The prevalidation it's not an important error. The other one is the first time I read it.
If you want try to flash everything and try booting, or wait someone else answer you.
Click to expand...
Click to collapse
thanks for your help but i have ran into a few issues:
1. there is no bootloader.img in the zip file
2. when i "fastboot flash system system.img_sparsechunk.0" it fails and IMAGE TOO LARGE comes up on my phone, i know its something to do with mfastboot, could you tell me how to setup mfastboot please
mawigg2015 said:
thanks for your help but i have ran into a few issues:
1. there is no bootloader.img in the zip file
2. when i "fastboot flash system system.img_sparsechunk.0" it fails and IMAGE TOO LARGE comes up on my phone, i know its something to do with mfastboot, could you tell me how to setup mfastboot please
Click to expand...
Click to collapse
Probably those command lines, are not good. Let me verify what's in the stock firmware.
Which is your right model and region?
Anyway, for mfastboot if type command: fastboot devices, and your phone is listed, this means that works properly.
dani.galla said:
Probably those command lines, are not good. Let me verify what's in the stock firmware.
Which is your right model and region?
Anyway, for mfastboot if type command: fastboot devices, and your phone is listed, this means that works properly.
Click to expand...
Click to collapse
Hi it's a xt1072 gb
Sorry that's xt1071
mawigg2015 said:
Sorry that's xt1071
Click to expand...
Click to collapse
Are you sure? On google there's no xt1071.
See the right model under the backcover
Sorry yh xt1072 thanks
Anyway,
I downloaded the stock firmware of xt1072 eu, and the command that I posted you are not right.
So the right commands on mfastboot should be:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
So the other day I tried to go back to stock from resurrection remix using a stock 5.1 file I found on this website. I used to flash and all that kind of stuff a while ago but haven't in a while and lost my touch. So basically I know I did it wrong and now there is no OS on the phone. I can access both TWRP and Fastboot mode but that's it. When I try to boot it shows the bootloader unlock screen, vibrates and then goes to a black screen that flashes the little android guy with his stomach open every so often. I tried flashing both stock and RR twice and still nothing. Any help would be greatly appreciated!
P.S. I have the Verizon XT1096 Variant.
Speedy712 said:
So the other day I tried to go back to stock from resurrection remix using a stock 5.1 file I found on this website. I used to flash and all that kind of stuff a while ago but haven't in a while and lost my touch. So basically I know I did it wrong and now there is no OS on the phone. I can access both TWRP and Fastboot mode but that's it. When I try to boot it shows the bootloader unlock screen, vibrates and then goes to a black screen that flashes the little android guy with his stomach open every so often. I tried flashing both stock and RR twice and still nothing. Any help would be greatly appreciated!
P.S. I have the Verizon XT1096 Variant.
Click to expand...
Click to collapse
So you have the Motorola USB drivers installed:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Recent versions of ADB/Fastboot.
Latest stock firmware:
firmware.center/firmware/Motorola/Moto%20X%20%282nd%20gen-2014%29/Stock/XT1096/
Probably VICTARA_VERIZON_XT1096_5.1_LPE23.32-25-5_cid2_CFC.xml.zip
Extract the firmware and put the 4 ADB/Fastboot files in the folder with the firmware files.
Boot into Bootloader Mode and connect the phone, make sure the phone says "connected..."
Shift + right-click inside that folder, Open command window here... Paste these commands, BUT CHECK THE NUMBER of sparsechunks your firmware has:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot reboot-bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
Thank you so much!! I tried this before with no avail. I think the website I used for the commands didn't have the first few that you had. But it worked, my phone booted up. Thanks again so much!
Speedy712 said:
Thank you so much!! I tried this before with no avail. I think the website I used for the commands didn't have the first few that you had. But it worked, my phone booted up. Thanks again so much!
Click to expand...
Click to collapse
You're welcome, glad it worked!
If you want to try custom roms again, I've been using TWRP 3.0.2-1 and it seems to have no issues so far (and I'm running the latest CM Nightlies).
Gus Ghanem said:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot reboot-bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
Click to expand...
Click to collapse
so with this method you dont have to use the motofastboot?
fakieskr8333 said:
so with this method you dont have to use the motofastboot?
Click to expand...
Click to collapse
If you mean Motorola's mfastboot, no you don't have to, I always use the lastest fastboot to flash stock firmware, custom recovery, etc.
Of course, it's always best to have an unlocked bootloader, but then you lose warranty.
Gus Ghanem said:
If you mean Motorola's mfastboot, no you don't have to, I always use the lastest fastboot to flash stock firmware, custom recovery, etc.
Of course, it's always best to have an unlocked bootloader, but then you lose warranty.
Click to expand...
Click to collapse
I am on mac so hopefully that is not causing any issues, but I am having the same exact problem as the OP. But I was missing that first command so I am thinking that'll fix it. When in twrp whenever I tried to flash anything or wipe partitions it threw up all kinds of errors about the partitions not being mounted and stuff. Do you think missing that first command would mess up the partition table or something?
This is the errors i got when trying to wipe.
http://imgur.com/0p3lH9Q
I have been out the android scene for over a year now so I am a little rusty lol.
fakieskr8333 said:
I am on mac so hopefully that is not causing any issues, but I am having the same exact problem as the OP. But I was missing that first command so I am thinking that'll fix it. When in twrp whenever I tried to flash anything or wipe partitions it threw up all kinds of errors about the partitions not being mounted and stuff. Do you think missing that first command would mess up the partition table or something?
This is the errors i got when trying to wipe.
http://imgur.com/0p3lH9Q
I have been out the android scene for over a year now so I am a little rusty lol.
Click to expand...
Click to collapse
The first two commands are not necessary, but they wouldn't cause any problems, nor fix any:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
But before you start flashing anything on a phone, you should have the latest stock firmware on it, so that you have the latest bootloader and partition table. Some versions of TWRP (3.0) may have been corrupting partitions. You should try reflashing the latest partition table and bootloader from the latest firmware, then reflashing the latest TWRP 3.0.2-1.
I'm not familiar with macs... Is the phone encrypted?
Gus Ghanem said:
The first two commands are not necessary, but they wouldn't cause any problems, nor fix any:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
But before you start flashing anything on a phone, you should have the latest stock firmware on it, so that you have the latest bootloader and partition table. Some versions of TWRP (3.0) may have been corrupting partitions. You should try reflashing the latest partition table and bootloader from the latest firmware, then reflashing the latest TWRP 3.0.2-1.
I'm not familiar with macs... Is the phone encrypted?
Click to expand...
Click to collapse
no it was never encrypted. I have redownloaded the latest firmware on the chance that my download was corrupted or something. Should I flash the partition and boot images then restart into the bootloader before flashing the rest?
fakieskr8333 said:
no it was never encrypted. I have redownloaded the latest firmware on the chance that my download was corrupted or something. Should I flash the partition and boot images then restart into the bootloader before flashing the rest?
Click to expand...
Click to collapse
I guess it's safest to just flash the whole firmware as I have listed in the commands; these commands are contained in an XML file that comes with the firmware (flashfile.xml), the "reboot bootloader" after the partition table and bootloader flash, comes from Motorola's flashing instructions.
Gus Ghanem said:
I guess it's safest to just flash the whole firmware as I have listed in the commands; these commands are contained in an XML file that comes with the firmware (flashfile.xml), the "reboot bootloader" after the partition table and bootloader flash, comes from Motorola's flashing instructions.
Click to expand...
Click to collapse
Thanks, I am at work now but as soon as I get home I will give it a go. I have been on iOS for over a year now and my moto has been dead since about a month after moto allowed us to unlock the verizon variant. Stupid thing lol.
how do I check the amount of sparsechunks that I have. Sorry for the dumb question
---------- Post added at 02:04 PM ---------- Previous post was at 01:44 PM ----------
I just finished doing this. I am kind of a noob at this so bear with me. I tried this and I get this message that says "Boot up failed" when I try normal powerup. I'm kind of scared..
ABSOLUTE LEGEND
i was stuck since almost 36 hours, good i dint lose hope and smash the x against the wall
YOUR A LIFE SAVER Fakieskr
So I been up all night trying to figuring out to fix this, so make things short i'll tell you what's wrong. My moto x is stuck at the warning bootloader unlocked screen and the only thing i can go to is the bootloader. I was flashing cyanogenmod 13 and i made some dumb decisions while trying to fix things. I trying to go into recovery but every time it boot back to the warning screen. At this i'm clueless at what to do and i'm just trying get my phone back to working condition, any help is appreciated.
Slupvee said:
So I been up all night trying to figuring out to fix this, so make things short i'll tell you what's wrong. My moto x is stuck at the warning bootloader unlocked screen and the only thing i can go to is the bootloader. I was flashing cyanogenmod 13 and i made some dumb decisions while trying to fix things. I trying to go into recovery but every time it boot back to the warning screen. At this i'm clueless at what to do and i'm just trying get my phone back to working condition, any help is appreciated.
Click to expand...
Click to collapse
It's always a good idea to put your phone in bootloader mode and do:
fastboot getvar all
So you get all the specs of your phone, and copy the info into a Notepad file.
Did you try reflashing TWRP (twrp-3.0.2-1-victara.img)?
If that's not working, you may be able to reflash stock firmware.
https://firmware.center:8081/firmware/Motorola/
Something like this:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
thank you!
I'm all the way up to Fastboot flash system system.img and it is saying Invalid sparse file format at header magi, I don't know if that telling me something wrong or continue.
Slupvee said:
thank you!
I'm all the way up to Fastboot flash system system.img and it is saying Invalid sparse file format at header magi, I don't know if that telling me something wrong or continue.
Click to expand...
Click to collapse
Which XT variant do you have, on which carrier? Are you sure you got the right firmware for your phone model?
Gus Ghanem said:
Which XT variant do you have, on which carrier? Are you sure you got the right firmware for your phone model?
Click to expand...
Click to collapse
Verizon moto x 2014 5.1
Hey did u fixed it?
Dear All,
Need your advice and help!!!
My cousin bro's Moto X just got bricked after OTA update to Marshmallow.
During the Android Update and error occurs and everything when blank (that's what he said)
Now when you boot the device it goes directly to AP Fastboot Flash Mode (S)
When you select Recovery from the list and error occurs and says "failed to validate system image" Boot Up Failed.
Device is locked, Status code: 0 (cant unlock Bootloader, Already try the Motorola site to get unlock key)
Software status: Official.
Fastboot works but cannot write system partition, recovery and boot getting error when trying to write using mfastboot.
ADB doesnt connect. "adb devices" show no connected devices.
RSD lite doesnt detect the phone
and Motorola Device manager say current version "23.16.3.victara_reteu_reteuall.en.eu"
What should i try next so that i can get back to factory or if we can get the bootloader to open then surely Custom Rom right now we are stuck at the fastboot/bootloader page.
Try https://firmware.center/firmware/Motorola/Moto%20X%20%282nd%20gen-2014%29/Stock/XT1092/VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml.zip using fastboot.
Follow the flashing steps in the .xml file that was included in the package.
A typical flashing sequence includes all these partitions, but might vary depending on your product - so please use the sequence in the .xml file in your package.
E.g:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set oem
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
It make your Moto to 6.0 stock rom.
Good luck.
K will give it a shot.
Sent from my SM-T310 using XDA Free mobile app
Avolyte said:
K will give it a shot.
Sent from my SM-T310 using XDA Free mobile app
Click to expand...
Click to collapse
http://www.filefactory.com/file/5w6...ARA_RETEU_6.0_MPES24.49-18-3_cid7_CFC.xml.zip
this is the one you need. its the latest image, it includes the may security patch and latest kernel / bootloader.
moto dosent like to downgrade, so, newest is always the safest
edit: its for europe, if that matters
I have download and tried line by line but these steps contain errors.
fastboot flash partition gpt.bin
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
This is the message that i got from fastboot
C:\Users\Acer\Desktop\fastboot>fastboot flash system system.img_sparsechunk.9
target reported max download size of 536870912 bytes
sending 'system' (130272 KB)...
OKAY [ 5.406s]
writing 'system'...
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 5.457s
danielcepa said:
http://www.filefactory.com/file/5w6...ARA_RETEU_6.0_MPES24.49-18-3_cid7_CFC.xml.zip
this is the one you need. its the latest image, it includes the may security patch and latest kernel / bootloader.
moto dosent like to downgrade, so, newest is always the safest
edit: its for europe, if that matters
Click to expand...
Click to collapse
Buddy is there any way to flash Bootloader?, cause i just lost Bootloader and it doesn't show up!! Srry for this idiotic ques.
shobint7 said:
Buddy is there any way to flash Bootloader?, cause i just lost Bootloader and it doesn't show up!! Srry for this idiotic ques.
Click to expand...
Click to collapse
Do you mean that you get a blank screen when pressing power and vol down together?
Flipz77 said:
Do you mean that you get a blank screen when pressing power and vol down together?
Click to expand...
Click to collapse
Yaa exactly it shows blank and boots up automatically after few seconds to homescreen! So I'm in great trouble I can't even flash anything!
For me I still cant flash anything after the OTA Update...stuck at Flashmode page
You said that you "couldn't unlock the bootloader", but what do you mean exactly? I have a xt1092 as well and I didn't have problems with the Moto code.
Sorry if I only ask questions but I know nothing below bootloader level, for me it's always been a lifesaver, never a headache. So I'm only trying to gather information for someone more experienced than me.
Avolyte said:
I have download and tried line by line but these steps contain errors.
fastboot flash partition gpt.bin
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
This is the message that i got from fastboot
C:\Users\Acer\Desktop\fastboot>fastboot flash system system.img_sparsechunk.9
target reported max download size of 536870912 bytes
sending 'system' (130272 KB)...
OKAY [ 5.406s]
writing 'system'...
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 5.457s
Click to expand...
Click to collapse
try danielcepa's link
danielcepa said:
http://www.filefactory.com/file/5w6...ARA_RETEU_6.0_MPES24.49-18-3_cid7_CFC.xml.zip
this is the one you need. its the latest image, it includes the may security patch and latest kernel / bootloader.
moto dosent like to downgrade, so, newest is always the safest
edit: its for europe, if that matters
Click to expand...
Click to collapse
Thank you very much its working an booted. Sorry I tried to download it like so many times but the connection got interrupted and finally one day i manage to download the 1.3 gib file and flash it now its working fine...
This case is solved!!!
Congrats
somebody can tell me, what i need try more
i cant update rom(cn 2.27) and cant change it. all updates stucks at 25% with failure.
i try do that (flashing cn rom 2.27 from instructions)
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot
lock and unlock bootloader
flashing twrp (device dont boot into twrp!)
i tried different roms (eu 2.07, cn 2.27, cn 2.30, us 1.11) all stucks on 25%
when i try update with system.new.dat (from 1.11) in last step i see that
sending sparse 'system' 5/5 (138492 KB)...
FAILED (data write failure (Unknown error))
finished. total time: 101.151s
Click to expand...
Click to collapse
update!
all done) by flashing fastboot flash boot, recovery, modem, splash from 2.30
Here is 1.11, unfortunately I dont have the original one saved, only the one I patched. It's rooted w/ magisk patch.
https://drive.google.com/open?id=11hEZ3W2GeyM2CfBhgaRBYGiSTTVnQqOK
Secretcow said:
Here is 1.11, unfortunately I dont have the original one saved, only the one I patched. It's rooted w/ magisk patch.
https://drive.google.com/open?id=11hEZ3W2GeyM2CfBhgaRBYGiSTTVnQqOK
Click to expand...
Click to collapse
i think need not patched boot, need system part system.img( but thanks
Rauh-Welt said:
i think need not patched boot, need system part system.img( but thanks
Click to expand...
Click to collapse
Woops you're 100% right. Sorry man, I need to go to sleep.
You can find the na global rom v1.11 here: http://rom.download.nubia.com/Europe&Asia/NX629/NX629J_Z69_EN_WPJ0O_V111.zip
Should be able to unzip and flash the system img.
Could you explain to me step by step how to solve it? please
Rauh-Welt said:
somebody can tell me, what i need try more
i cant update rom(cn 2.27) and cant change it. all updates stucks at 25% with failure.
i try do that (flashing cn rom 2.27 from instructions)
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot
lock and unlock bootloader
flashing twrp (device dont boot into twrp!)
i tried different roms (eu 2.07, cn 2.27, cn 2.30, us 1.11) all stucks on 25%
when i try update with system.new.dat (from 1.11) in last step i see that
update!
all done) by flashing fastboot flash boot, recovery, modem, splash from 2.30
Click to expand...
Click to collapse
Could you explain to me step by step how to solve it? please