update failure on 25% with any rom - Nubia Red Magic 3 Questions & Answers

somebody can tell me, what i need try more
i cant update rom(cn 2.27) and cant change it. all updates stucks at 25% with failure.
i try do that (flashing cn rom 2.27 from instructions)
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot
lock and unlock bootloader
flashing twrp (device dont boot into twrp!)
i tried different roms (eu 2.07, cn 2.27, cn 2.30, us 1.11) all stucks on 25%
when i try update with system.new.dat (from 1.11) in last step i see that
sending sparse 'system' 5/5 (138492 KB)...
FAILED (data write failure (Unknown error))
finished. total time: 101.151s
Click to expand...
Click to collapse
update!
all done) by flashing fastboot flash boot, recovery, modem, splash from 2.30

Here is 1.11, unfortunately I dont have the original one saved, only the one I patched. It's rooted w/ magisk patch.
https://drive.google.com/open?id=11hEZ3W2GeyM2CfBhgaRBYGiSTTVnQqOK

Secretcow said:
Here is 1.11, unfortunately I dont have the original one saved, only the one I patched. It's rooted w/ magisk patch.
https://drive.google.com/open?id=11hEZ3W2GeyM2CfBhgaRBYGiSTTVnQqOK
Click to expand...
Click to collapse
i think need not patched boot, need system part system.img( but thanks

Rauh-Welt said:
i think need not patched boot, need system part system.img( but thanks
Click to expand...
Click to collapse
Woops you're 100% right. Sorry man, I need to go to sleep.
You can find the na global rom v1.11 here: http://rom.download.nubia.com/Europe&Asia/NX629/NX629J_Z69_EN_WPJ0O_V111.zip
Should be able to unzip and flash the system img.

Could you explain to me step by step how to solve it? please

Rauh-Welt said:
somebody can tell me, what i need try more
i cant update rom(cn 2.27) and cant change it. all updates stucks at 25% with failure.
i try do that (flashing cn rom 2.27 from instructions)
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot
lock and unlock bootloader
flashing twrp (device dont boot into twrp!)
i tried different roms (eu 2.07, cn 2.27, cn 2.30, us 1.11) all stucks on 25%
when i try update with system.new.dat (from 1.11) in last step i see that
update!
all done) by flashing fastboot flash boot, recovery, modem, splash from 2.30
Click to expand...
Click to collapse
Could you explain to me step by step how to solve it? please

Related

How do i restore XT1068 to uk stock rom on mac?

I've searched and searched and the rom i have installed is not the uk version and the phone won't let me lock the boot loader. where can i find the stock uk rooms and how do i do it on a mac? help?
jesus h christ
here have the files on the OP attachments
here have all the ROM's stock
the command are the some as any other back to stock help...
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem lock
fastboot reboot
if you get a error on the command
fastboot flash partition gpt.bin
try to do without it
thanks man will try now
nah this don't work
when i try to lock it it says sign flash signed images firstly, 2nd command i get an error and the 3rd also an error. every other command other than fastboot oem lock worked, so i think I'm on the uk stock rom(its not in the link you posted btw, i got it else where).
yeah I'm on stock gb and am getting ota updates but my boot loader is still unlocked?
crozbomb said:
when i try to lock it it says sign flash signed images firstly, 2nd command i get an error and the 3rd also an error. every other command other than fastboot oem lock worked, so i think I'm on the uk stock rom(its not in the link you posted btw, i got it else where).
yeah I'm on stock gb and am getting ota updates but my boot loader is still unlocked?
Click to expand...
Click to collapse
the lock is the last command, if you don't flash all the files in order the last command will not work, only exception is the gpt.bim, but is a maybe...
so if you have error principal on line 3, you need to check if the file exist, it command is flashing a file, if the file don't exist will not flash and a error show, and check all the command again, try and make a print screen of the process and the folder with all the file, and put it here...
if you have a full original Motorola ROM it must work, if everything check the rom is the probem.
I know i may have check everything command files it all , but i must try all possibilities.
and way you need to lock it?
i don't use mac, just windows and the PC or MAC is not the problem becouse i use that some order of commnad's last time i lock my phone but i lock just to see if is possible because after you unlocked you never need to change for noting.
bootloader have 3 stats:
Status code 0 =locked with warranty
Status code 3 = unlocked without warranty
Status code 2= re-locked but also without warranty
Status code 1 is unknown.
you can receive and install the OTA if you have the stock ROM no changes no root + stock recovery and boot images, bootloader status doesn't change a ting.
the only uses for re-locked it is to test if you can, or test if the rom is full stock or try to send for repair but in that last depending on the region it will not be repair for free, because it loses the warranty after bootloader unlock, but if yours region don't care for bootloader status, or the help center care but don't notes it you can try and have success.

Cannot flash system.img on global rom

Hey I am bricked my device I am was on global rom and then wanted to convert to Chinese rom tried to flash it through system update.. And now stock on fastboot forever until now.. I am tried to flash system. Img of Chinese rom.. Got message that file too big in adb.. There is any program to compress this img?
danielad200 said:
Hey I am bricked my device I am was on global rom and then wanted to convert to Chinese rom tried to flash it through system update.. And now stock on fastboot forever until now.. I am tried to flash system. Img of Chinese rom.. Got message that file too big in adb.. There is any program to compress this img?
Click to expand...
Click to collapse
Local update didn't work because of mismatch boot.img and recovery.img. In fastboot flash CN boot and recovery then reboot recovery, wipe data and cache, insert OTG with CN.zip package and install.
***When switching region ROMs always do this method from recovery, local update does not handle this well at all and fails most times.
***If you want you could also try EDL mode, I never tried it but theoretically the command "adb install N629J-update.zip should work. I have not tried this method but that's what EDL mode is for ?
danielad200 said:
Hey I am bricked my device I am was on global rom and then wanted to convert to Chinese rom tried to flash it through system update.. And now stock on fastboot forever until now.. I am tried to flash system. Img of Chinese rom.. Got message that file too big in adb.. There is any program to compress this img?
Click to expand...
Click to collapse
Even i had the same issue. First make sure you are using the latest version of ADB and Fastboot. Use 1.4.3 or higher. Sometimes it will be installed in C:\Program Files(X86)\minimal adb and fastboot Folder. Copy the img files to this location and then flash the image.
Download necessary files https://drive.google.com/drive/folde...Ym?usp=sharing
fastboot oem nubia_unlock NUBIA_NX629J
fastboot -w
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash system system.img
fastboot reboot
When you flash system.img you should get a warning message. Don't close the window. Wait for sometime. It should split the file upload as 5 parts. Once all the 5 parts are uploaded. Then type fastboot reboot. Then remove the charging cable(very important) and you should get the normal warning message and then phone will try to boot. Once you get the splash screen and booting screen. Press volume Up and power together. It should go to default recovery. Select English. Wipe data and then wipe cache. Reboot. Now your phone should boot normally. Hope this helps. Good luck.
Pm me i know how to fix
I tried it
vimalrajan1988 said:
Even i had the same issue. First make sure you are using the latest version of ADB and Fastboot. Use 1.4.3 or higher. Sometimes it will be installed in C:\Program Files(X86)\minimal adb and fastboot Folder. Copy the img files to this location and then flash the image.
Download necessary files https://drive.google.com/drive/folde...Ym?usp=sharing
fastboot oem nubia_unlock NUBIA_NX629J
fastboot -w
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash system system.img
fastboot reboot
When you flash system.img you should get a warning message. Don't close the window. Wait for sometime. It should split the file upload as 5 parts. Once all the 5 parts are uploaded. Then type fastboot reboot. Then remove the charging cable(very important) and you should get the normal warning message and then phone will try to boot. Once you get the splash screen and booting screen. Press volume Up and power together. It should go to default recovery. Select English. Wipe data and then wipe cache. Reboot. Now your phone should boot normally. Hope this helps. Good luck.
Click to expand...
Click to collapse
I tried it, but i got problem when I flash system.img, the error is: "Invalid sparse file format at header magic". Did you know how to fix that? Sorry for bad English
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
Easy to use unbrick tool.
vimalrajan1988 said:
Even i had the same issue. First make sure you are using the latest version of ADB and Fastboot. Use 1.4.3 or higher. Sometimes it will be installed in C:\Program Files(X86)\minimal adb and fastboot Folder. Copy the img files to this location and then flash the image.
Download necessary files https://drive.google.com/drive/folde...Ym?usp=sharing
fastboot oem nubia_unlock NUBIA_NX629J
fastboot -w
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash system system.img
fastboot reboot
When you flash system.img you should get a warning message. Don't close the window. Wait for sometime. It should split the file upload as 5 parts. Once all the 5 parts are uploaded. Then type fastboot reboot. Then remove the charging cable(very important) and you should get the normal warning message and then phone will try to boot. Once you get the splash screen and booting screen. Press volume Up and power together. It should go to default recovery. Select English. Wipe data and then wipe cache. Reboot. Now your phone should boot normally. Hope this helps. Good luck.
Click to expand...
Click to collapse
I did it as directed. But after fastboot reboot command. When I pressed v+ and power button I got the traditional white screen with ants.
Link expired please give me new one

Lose imei after flash rom+root

Help.
After Root and Flash Rom on my mobile phone, sim card dont accept pin... Every Said, " incorrecly PIN" .
I try to see IMEI and i lose imei. How do repair ?
https://ibb.co/Lz57RnL
leandroogaby said:
Help.
After Root and Flash Rom on my mobile phone, sim card dont accept pin... Every Said, " incorrecly PIN" .
I try to see IMEI and i lose imei. How do repair ?
https://ibb.co/Lz57RnL
Click to expand...
Click to collapse
Your IMEI's are on the side of your retail box.
Fixing your phone is a different matter.
nabbed said:
Your IMEI's are on the side of your retail box.
Fixing your phone is a different matter.
Click to expand...
Click to collapse
yes, whats solution ?! i restore rom 3 times
leandroogaby said:
yes, whats solution ?! i restore rom 3 times
Click to expand...
Click to collapse
Return phone to vendor.
nabbed said:
Return phone to vendor.
Click to expand...
Click to collapse
It has to be another solution.
AFAIK you would have to back up your EFS partition prior to any kind of alteration..
At least that's how things used to work..
Even the OnePlus 5 I had to do it. Just incase.
I did have the same issue happen to me on my old Sony z1 but after returning to a stock ROM, it put the IMEI back from 00000000000
If you didn't back up the partition then you may be screwed.
Unless there's a way to edit an already backed up EFS partition and then edit it to reflect yours then restore it.
PS: you can find yours on the box.
dladz said:
AFAIK you would have to back up your EFS partition prior to any kind of alteration..
At least that's how things used to work..
Even the OnePlus 5 I had to do it. Just incase.
I did have the same issue happen to me on my old Sony z1 but after returning to a stock ROM, it put the IMEI back from 00000000000
If you didn't back up the partition then you may be screwed.
Unless there's a way to edit an already backed up EFS partition and then edit it to reflect yours then restore it.
PS: you can find yours on the box.
Click to expand...
Click to collapse
i don't have efs folder, i see very tutorials, and all don't fix.
leandroogaby said:
i don't have efs folder, i see very tutorials, and all don't fix.
Click to expand...
Click to collapse
Then perhaps the process has changed.
But backing up isn't like copying a folder.
You wouldn't be able to just see the EFS folder like DCIM or Downloads.
You've very few options left, google is your friend at this point.
My experience with IMEI's going mental i've already posted mate, sorry.
dladz said:
Then perhaps the process has changed.
But backing up isn't like copying a folder.
You wouldn't be able to just see the EFS folder like DCIM or Downloads.
You've very few options left, google is your friend at this point.
My experience with IMEI's going mental i've already posted mate, sorry.
Click to expand...
Click to collapse
more people ?!!! i need help
leandroogaby said:
more people ?!!! i need help
Click to expand...
Click to collapse
Did you flash a stock firmware? Did you try anything I said?
dladz said:
Did you flash a stock firmware? Did you try anything I said?
Click to expand...
Click to collapse
After i i flash custom rom the i cant turn on the wifi so i decided to reset factory of my red magic 3 but after a rest i got stuck in FASTBOOT MODE no matter what i choice from reboot from recovery mode or reboot from system it will just restart and back again to FASTBOOT MODE.
THEN I TRY FLASH STOCK ROM USING :
• fastboot oem nubia_unlock NUBIA_NX629J
• fastboot flash parameter parameter.img
• fastboot reboot bootloader
• fastboot oem nubia_unlock NUBIA_NX629J
• fastboot flash boot boot.img
• fastboot flash recovery recovery.img
• fastboot flash splash splash.img
• fastboot flash modem NON-HLOS.bin
• fastboot flash system system.img
• fastboot flash dsp dspso.bin
• fastboot oem nubia_lock NUBIA_NX629J
• fastboot reboot
but, when i flash system.img, in step 5/5 give me error
C:\Program Files (x86)\Minimal ADB and Fastboot\NX629J_Z69_EN_WPJ0O_V209>fastboot flash system system.img
target reported max download size of 805306368 bytes
Invalid sparse file format at header magic
erasing 'system'...
OKAY [ 0.016s]
sending sparse 'system' 1/5 (768623 KB)...
OKAY [ 26.609s]
writing 'system' 1/5...
OKAY [ 0.010s]
sending sparse 'system' 2/5 (753639 KB)...
OKAY [ 31.166s]
writing 'system' 2/5...
OKAY [ 0.010s]
sending sparse 'system' 3/5 (776366 KB)...
OKAY [ 32.717s]
writing 'system' 3/5...
OKAY [ 0.008s]
sending sparse 'system' 4/5 (786429 KB)...
OKAY [ 32.807s]
writing 'system' 4/5...
OKAY [ 0.004s]
sending sparse 'system' 5/5 (138400 KB)...
FAILED (data write failure (Unknown error))
finished. total time: 136.141s
Click to expand...
Click to collapse
i try using 2.0 usb port and another cable, and don't work.
leandroogaby said:
After i i flash custom rom the i cant turn on the wifi so i decided to reset factory of my red magic 3 but after a rest i got stuck in FASTBOOT MODE no matter what i choice from reboot from recovery mode or reboot from system it will just restart and back again to FASTBOOT MODE.
THEN I TRY FLASH STOCK ROM USING :
• fastboot oem nubia_unlock NUBIA_NX629J
• fastboot flash parameter parameter.img
• fastboot reboot bootloader
• fastboot oem nubia_unlock NUBIA_NX629J
• fastboot flash boot boot.img
• fastboot flash recovery recovery.img
• fastboot flash splash splash.img
• fastboot flash modem NON-HLOS.bin
• fastboot flash system system.img
• fastboot flash dsp dspso.bin
• fastboot oem nubia_lock NUBIA_NX629J
• fastboot reboot
but, when i flash system.img, in step 5/5 give me error
i try using 2.0 usb port and another cable, and don't work.
Click to expand...
Click to collapse
I had this issue earlier today, instead of flashing system.img that way, do this instead:
fastboot flash -S 100M system system.img
This worked for me, may take a while as it splits it into several chunks which have a lot less chance of being corrupt.
johnnio said:
i had this issue earlier today, instead of flashing system.img that way, do this instead:
Fastboot flash -s 100m system system.img
this worked for me, may take a while as it splits it into several chunks which have a lot less chance of being corrupt.
Click to expand...
Click to collapse
omg thanksssssssss work :d
leandroogaby said:
omg thanksssssssss work :d
Click to expand...
Click to collapse
Glad to help
Johnnio said:
Glad to help
Click to expand...
Click to collapse
I was able to install the ROM, but the Sim Card still doesn't work
leandroogaby said:
omg thanksssssssss work :d
Click to expand...
Click to collapse
Superb..
Great stuff.
Ps: lol dude you haven't given one thanks?? That's savage
leandroogaby said:
I was able to install the ROM, but the Sim Card still doesn't work
Click to expand...
Click to collapse
I'm afraid that I don't have much experience with this particular phone, only had it a couple of days.
What I did to flash mine is the following but I'm not sure if this will solve your issue, make sure to do this in the following order.
fastboot oem nubia_unlock NUBIA_NX629J
Fastboot erase boot
Fastboot erase recovery
Fastboot erase system
Fastboot erase userdata
Fastboot erase cache
Fastboot erase data
fastboot erase modem
fastboot erase dsp
fastboot erase vbmeta
fastboot erase dtbo
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash dtbo dtbo.img
fastboot flash dsp dspso.bin
Fastboot flash -S 100m system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
For the files, I used the latest Chinese rom and system.img uploaded by a user to mega, I can link this if needed. Then using an otg cable I booted into recovery then wiped data and cache then flashed the latest eu rom.
Again I do not know if this will solve your issue as I didn't encounter it myself.
Johnnio said:
I'm afraid that I don't have much experience with this particular phone, only had it a couple of days.
What I did to flash mine is the following but I'm not sure if this will solve your issue, make sure to do this in the following order.
fastboot oem nubia_unlock NUBIA_NX629J
Fastboot erase boot
Fastboot erase recovery
Fastboot erase system
Fastboot erase userdata
Fastboot erase cache
Fastboot erase data
fastboot erase modem
fastboot erase dsp
fastboot erase vbmeta
fastboot erase dtbo
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash dtbo dtbo.img
fastboot flash dsp dspso.bin
Fastboot flash -S 100m system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
For the files, I used the latest Chinese rom and system.img uploaded by a user to mega, I can link this if needed. Then using an otg cable I booted into recovery then wiped data and cache then flashed the latest eu rom.
Again I do not know if this will solve your issue as I didn't encounter it myself.
Click to expand...
Click to collapse
Press
*#06#
It'll probably be 0000000000000
Looking to be an RMA mate
dladz said:
Press
*#06#
It'll probably be 0000000000000
Looking to be an RMA mate
Click to expand...
Click to collapse
Most likely unfortunately, any idea how this happened to him, I'd really like to avoid it myself. Anyway to backup what ever has been deleted or corrupted?
Johnnio said:
Most likely unfortunately, any idea how this happened to him, I'd really like to avoid it myself. Anyway to backup what ever has been deleted or corrupted?
Click to expand...
Click to collapse
when i put *#06# i see:
IMEI1
NULL
IMEI2
NULL
MEID
NULL

HELP!! My red magic 3 is in bootloader bootloop

I flash the Chinese ROM to the global version of red magic3
And entered the boot loader boot loop
How to fix it?
If you try to flash system.img, tell me how to fix the problem that fastboot.exe will stop working.
I saw other threads, but I didn't know well because I was so nervous in English
yajujann said:
I flash the Chinese ROM to the global version of red magic3
And entered the boot loader boot loop
How to fix it?
If you try to flash system.img, tell me how to fix the problem that fastboot.exe will stop working.
I saw other threads, but I didn't know well because I was so nervous in English
Click to expand...
Click to collapse
I am Japanese High school student . So I can't understand English well
kelv55l said:
(skipped message) ...
After you extracted the img and bin files and placed them into the folder where the cmd is placed connect your phone to the computer, open the cmd exe and run the commands
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
After all that you should be able to go into recovery mode through fastboot mode if not then try and flash dtbo.img and vbmeta.img in the line of commands so for example "fastboot flash dtbo dtbo.img" and "fastboot flash vbmeta vbmeta.img" looking something like this...
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash dtbo dtbo.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash dsp dspso.bin
fastboot flash system system.img
fastboot reboot
This was the line of commands I used when my recovery mode was corrupt and somehow worked
I hope this helps and let me know if it worked or if the issue is still there. Also the forum has several posts on this matter and they might have the answer you are looking for as it helped me with this issue. Good Luck!
Click to expand...
Click to collapse
Please try this kelv55l's suggestion
into fastboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash recovery recovery.img
then into recovery wipe data
you can get recovery.img from update.zip
Hello i have no system.img ...
i can not find them in the NX629J_Z69_EN_WPJ0O_V210.zip
Can you Help me or can you me send the system.img
Please
My Phone have a bootloob in the fastboot mode...
"Hello, I have a problem. I flash twrp on my phone and wanted to flash from CN to EU version. I deleted the system and wanted to select the EU zip file. it did not work. That's why I restarted the phone. Now the phone starts only in the bootloader and the phone is no longer recognized by the PC although I have installed all drivers. Is there a special software that recognizes the phone or is the phone now forever defect? "
Thanks for the Help!
https://imgur.com/a/TRAJp9I
here you have the files and commands necessary to fix it. use the last sdk
https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page7
Thanks for the Answer!
I have a Problem with the Flash system.img
I have Uploadet a Sreenshoot!
https://imgur.com/a/b3Vdi9N
try fastboot flash -S 500M system system.img
if it wont work
fastboot flash -S 100M system system.img
ok i make
---------- Post added at 12:40 AM ---------- Previous post was at 12:27 AM ----------
tattoomees said:
try fastboot flash -S 500M system system.img
if it wont work
fastboot flash -S 100M system system.img
Click to expand...
Click to collapse
Holly !
THANKS MAN YOU ARE A HERO!!!!!
THANKS BROOO

Serious issue after flashing V10.3.3.0.PFKEUXM

Hi there,
I was on firmware V10.3.1.0.PFKEUXM running unofficial LineageOS 16.0 Now, today I flashed the firmware update V10.3.3.0.PFKEUXM in TWRP, which went through without a problem. Unfortunately the device is no longer booting up: I do see the MI and "unlocked" message for around 15 seconds, then the screen goes dark, and that's it.
By pressing volume-down + power I can get into fastboot, and I can flash TWRP for example, but I cannot get the device booted into TWRP (or into system). I am stuck here ... any help is welcome.
Kind regards, mistersixt.
PS: Flashed the new version from here: https://xiaomifirmwareupdater.com/firmware/raphael/
Did you try to flash stock global rom via mi flashtool?
(Just dont forget to unclick flash and lock)!
Mr.Vag said:
Did you try to flash stock global rom via mi flashtool?
(Just dont forget to unclick flash and lock)!
Click to expand...
Click to collapse
Do you have a download link for the EU version which can be used from the MiFlash tool? On www.miui.com I can find the indian version only ...
[edit]Just found this site https://mirom.ezbox.idv.tw/en/phone/raphael/, do I need recovery or the fastboot image?
mistersixt said:
Do you have a download link for the EU version which can be used from the MiFlash tool? On www.miui.com I can find the indian version only ...
[edit]Just found this site https://mirom.ezbox.idv.tw/en/phone/raphael/, do I need recovery or the fastboot image?
Click to expand...
Click to collapse
Yeap..tjats it.
Yes download fastboot rom unzip it on your desktop (you will have a folder) open flashtool refresh and select your ROM.. dont forget at the right om the bottom rhere is an option pre checked flash and lock.. change it to only flash (the first option) an just wait to flash..
Mr.Vag said:
Yeap..tjats it.
Yes download fastboot rom unzip it on your desktop (you will have a folder) open flashtool refresh and select your ROM.. dont forget at the right om the bottom rhere is an option pre checked flash and lock.. change it to only flash (the first option) an just wait to flash..
Click to expand...
Click to collapse
That ends with an error within the miflash tool:
Code:
...
err:sending 'sparecrclist' (0 KB)...
err:FAILED (remote: update sparse crc list failed)
err:finished. total time: 0.016s
error:"Flash sparsecrclist error"
Someone any ideas?
mistersixt said:
That ends with an error within the miflash tool:
Code:
...
err:sending 'sparecrclist' (0 KB)...
err:FAILED (remote: update sparse crc list failed)
err:finished. total time: 0.016s
error:"Flash sparsecrclist error"
Someone any ideas?
Click to expand...
Click to collapse
Maybe file is corrupted? Did you get the error on the beginning?
Try to not move your phone cable when ypu flashing also check ypur adb drivers.
mistersixt said:
That ends with an error within the miflash tool:
Code:
...
err:sending 'sparecrclist' (0 KB)...
err:FAILED (remote: update sparse crc list failed)
err:finished. total time: 0.016s
error:"Flash sparsecrclist error"
Someone any ideas?
Click to expand...
Click to collapse
Make sure you're downloading the fastboot image and not the recovery image. Fastboot images end with .tgz.
Here's the link for latest EEA 10.3.3.0
http://bigota.d.miui.com/V10.3.3.0....KEUXM_20190903.0000.00_9.0_eea_1ff82a2c11.tgz
Sent from my Redmi K20 Pro using Tapatalk
mistersixt said:
That ends with an error within the miflash tool:
Someone any ideas?
Click to expand...
Click to collapse
The Xiaomi firmware site you linked to also has all the ROMs. Go to the menu in the to left, then select MIUI, then search for K20 Pro. You'll see the most recent fastboot and recovery ROMs for each region. There's also a link to the archives where you'll find more or less all previous versions.
So... thanks for the hints, I started from scratch on a different Windows box, and I now successfully flashed the latest global EU version via the XiaomiFlash tool... the device is "up" again.
What I would like to know of course is what happened in the first place! With my Xiaomi Mi5s and Mi6 it was always safe to flash the latest firmware ZIP packages from https://xiaomifirmwareupdater.com/ ... I never had an issue. With bei Mi 9T Pro flashing the V10.3.3.0.PFKEUXM (came from V10.3.1.0.PFKEUXM) from within TWRP the device was unbootable afterwards . What would be the correct procedure in case this way isn't possible any longer?
Kind regards, mistersixt.
Hi,
I confirm the described issue. After flashing the FW package, the phone is in unusable state.
Regards,
meiser
meiser said:
Hi,
I confirm the described issue. After flashing the FW package, the phone is in unusable state.
Regards,
meiser
Click to expand...
Click to collapse
Ok, which means there might be a general issue then, I will let "yshalsager" know.
Kind regards, mistersixt.
Hi,
the same happened to me! After flashing the new firmware EEA my phone did not boot anymore. I had to restore the old firmware by flashing manually all partitions in fastboot to get it back working without data loss.
My phone boots but I cant install TWRP via fastboot on raphael_eea_global_images_V10.3.3.0.PFKEUXM EEA. Installed rom via MiFlash. Going back to 10.3.1.0.
UPDATE: flashed 10.3.1.0. and everything is ok
manul said:
Hi,
the same happened to me! After flashing the new firmware EEA my phone did not boot anymore. I had to restore the old firmware by flashing manually all partitions in fastboot to get it back working without data loss.
Click to expand...
Click to collapse
Would you mind providing the commands you have fired? What exactly did you do?
Thanks in advance,
mistersixt.
mistersixt said:
So... thanks for the hints, I started from scratch on a different Windows box, and I now successfully flashed the latest global EU version via the XiaomiFlash tool... the device is "up" again.
What I would like to know of course is what happened in the first place! With my Xiaomi Mi5s and Mi6 it was always safe to flash the latest firmware ZIP packages from https://xiaomifirmwareupdater.com/ ... I never had an issue. With bei Mi 9T Pro flashing the V10.3.3.0.PFKEUXM (came from V10.3.1.0.PFKEUXM) from within TWRP the device was unbootable afterwards . What would be the correct procedure in case this way isn't possible any longer?
Kind regards, mistersixt.
Click to expand...
Click to collapse
I guess whatever you flashed resulted in corrupted boot file and recovery as well. that's why you could not either boot or go to recovery. In case corrupted boot.img, system redirects to recovery itself. In your case since recovery is also gone, it tries to boot recovery for 15 seconds. then shuts down because it fails.
If anyone fixes this, please tell how
By the way, I used OrangeFox recovery, maybe this is the reason. Did not try TWRP.
manul said:
Hi,
the same happened to me! After flashing the new firmware EEA my phone did not boot anymore. I had to restore the old firmware by flashing manually all partitions in fastboot to get it back working without data loss.
Click to expand...
Click to collapse
How... What did you do? I have the same problem! Please help!
i have resolved it by downloading and extracting the older firmware EEA (Europe) V10.3.1.0.PFKEUXM from the site. Then in the folder firmware-update there are several partition files and you have to flash them via fastboot commands.
i.e. boot the device in fastboot mode (vol-down & pwr-btn).:
fastboot flash xbl xbl.elf
fastboot flash xbl_config xbl_config.elf
fastboot flash abl abl.elf
fastboot flash tz tz.mbn
fastboot flash hyp hyp.mbn
fastboot flash devcfg devcfg.mbn
fastboot flash storsec storsec.mbn
fastboot flash bluetooth BTFM.bin
fastboot flash cmnlib cmnlib.mbn
fastboot flash cmnlib64 cmnlib64.mbn
fastboot flash modem NON-HLOS.bin
fastboot flash dsp dspso.bin
fastboot flash keymaster km4.mbn
fastboot flash logo logo.img
fastboot flash aop aop.mbn
fastboot flash qupfw qupv3fw.elf
fastboot flash imagefv imagefv.elf
fastboot flash uefisecapp uefi_sec.mbn
hope it helped and is not too late! (prob theres a faster way to do it)
manul said:
i have resolved it by downloading and extracting the older firmware EEA (Europe) V10.3.1.0.PFKEUXM from the site. Then in the folder firmware-update there are several partition files and you have to flash them via fastboot commands.
i.e. boot the device in fastboot mode (vol-down & pwr-btn).:
fastboot flash xbl xbl.elf
fastboot flash xbl_config xbl_config.elf
fastboot flash abl abl.elf
fastboot flash tz tz.mbn
fastboot flash hyp hyp.mbn
fastboot flash devcfg devcfg.mbn
fastboot flash storsec storsec.mbn
fastboot flash bluetooth BTFM.bin
fastboot flash cmnlib cmnlib.mbn
fastboot flash cmnlib64 cmnlib64.mbn
fastboot flash modem NON-HLOS.bin
fastboot flash dsp dspso.bin
fastboot flash keymaster km4.mbn
fastboot flash logo logo.img
fastboot flash aop aop.mbn
fastboot flash qupfw qupv3fw.elf
fastboot flash imagefv imagefv.elf
fastboot flash uefisecapp uefi_sec.mbn
hope it helped and is not too late! (prob theres a faster way to do it)
Click to expand...
Click to collapse
wow thats a lot! thanks!
That problem I have from 10.3.1.0 eea, when you want flash on k20pro model, it install sucessfull via twrp but stucks on mi logo. But I find that flashing twrp again after rom can enter twrp after some sec of stuck in twrp, just lock and unlock twrp( use latest unofficial).Then just flash k20p china firm and all good. Never been able to succesfully flash EEA global roms (mi 9t pro roms) via twrp. I do not want use miflash because dont want mess with data wipe. I am decrypted. I think some procces is missing via twrp.. sucessfully is via Mi flash (friends phone flashed)

Categories

Resources