Related
hello everyboddy !
I have a rooted kindle fire HD 7" with the last update and i have attempted to install:
2nd bootloader
Fireflash
TWRP
CM10
But... when i have try to install twrp with Fireflash a red screen is a appeared after the reboot.
I'm a noob and i'm a little panicked !!! Can you help me to unbrick my kindle, i'm ready to make evrything but i have only in my hand my kindle and the original cable.
Please XDA's community !!!
buy a fastboot cable
this helped me with a red screen http://forum.xda-developers.com/showthread.php?t=1951254
The reason this happened was because you was on 7.3x of the AmazonOS, you needed to flash the 7.23 bootloader first before installing the second bootloader. Only a factory cable and the restore tool will save you now.
I did the same thing and the fast boot cable saved me. Good investment.
Sent from my Kindle Fire HD 7 using xda app-developers app
Also I suggest using hashcodes method rather than using fireflash to install TWRP and cm 10.1. It may look complicated but I've used his method on 3 kindles successfully and I'm a bit of a noob Just make sure you open the command window from the folder in which you saved the files - shift +right click mouse >open command window here. Sorry if you already know this. It just took me ages to figure that out lol! The link is here:
http://forum.xda-developers.com/showthread.php?p=40563958
Sent from my CM10.1 Kindle Fire Hd
Glad I'm not the only one. Have the red screen too.. ordered a cable from skorpn.. can't wait to get it and unbrick this thing. Feeling lost without my device.
i have same issue, red screen on boot. I got fastboot cable and installed tool and image. Now after selecting option 1 it just sits on < waiting for device >
if i run as administrator it says 'fastboot' is not recognized
Pls am in d same dilemma
goodknight001 said:
i have same issue, red screen on boot. I got fastboot cable and installed tool and image. Now after selecting option 1 it just sits on < waiting for device >
if i run as administrator it says 'fastboot' is not recognized
Click to expand...
Click to collapse
Am in the same dilemma as well pls kindly post a solution in case u found a way to resolve. I also bought a fastboot/factory cable as well but cant figure out how to make thingz work
bu,p pleas!
davelinc said:
Also I suggest using hashcodes method rather than using fireflash to install TWRP and cm 10.1. It may look complicated but I've used his method on 3 kindles successfully and I'm a bit of a noob Just make sure you open the command window from the folder in which you saved the files - shift +right click mouse >open command window here. Sorry if you already know this. It just took me ages to figure that out lol! The link is here:
http://forum.xda-developers.com/showthread.php?p=40563958
Sent from my CM10.1 Kindle Fire Hd
Click to expand...
Click to collapse
Actually, I've used the FireFlash method twice now on my Kindle Fire HD, and it's worked flawlessly both times, and takes less than five minutes to complete. But hey, whatever works.
i was also stuck in a red screen loop!
you really need a factory cable
what i did was turn off the kindle fire hd then plug in the cable, i turned on the device, and boom just use the toolkit which you can find on the development thread
i hope this helps!!! i was so frustrated as to why it wouldnt work
also you must have the kindle fire adb drivers.
ONLY FOR THOSE WITH A BROKEN POWER BUTTON: and if you dont happen to have a functioning power button like me, wait until the tablet dies, after just plug in the tablet to your pc with the factory cable that way when it finally recharges it boots up in fastboot, otherwise your tablet will be in red screen forever
Hi All,
I feel like I sort of screwed myself here. I tried rooting my Kindle but didn't fully understand the process and now have a bricked device. Fortunately I have a factory cable and when I plug it into my computer I'm getting the Fastboot Kindle Fire logo on my screen. Unfortunately I didn't set up any recovery before hand (that I know of) and my computer doesn't seem to be recognizing the device.
I've tried following this guide but don't quite understand what to do in step two (I've downloaded ADK and am thoroughly confused).
What are my next steps here for getting my device un-bricked? Any help or guidance at all would be much appreciated.
Thanks!
He really needs to reword step 2. When it refers to using adb, it means if your kindle is able to boot up normally then run that command to get into fast boot. You already have it in fast boot so just ignore the adb part.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
He really needs to reword step 2. When it refers to using adb, it means if your kindle is able to boot up normally then run that command to get into fast boot. You already have it in fast boot so just ignore the adb part.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
So just move on to step 3? I downloaded KFHD SRT tool but not really sure what to do next. Do I need windows or a specific program to launch the SR Tool.bat?
Thanks for all the help, really not familiar with this device at all.
Trevorange said:
So just move on to step 3? I downloaded KFHD SRT tool but not really sure what to do next. Do I need windows or a specific program to launch the SR Tool.bat?
Thanks for all the help, really not familiar with this device at all.
Click to expand...
Click to collapse
If your using a windows computer just double click it and it should start up
you sneaky rat, abducted from Amazon's ex, CM10.1 kindle, by Tapatalk 4
Trevorange said:
Hi All,
I feel like I sort of screwed myself here. I tried rooting my Kindle but didn't fully understand the process and now have a bricked device. Fortunately I have a factory cable and when I plug it into my computer I'm getting the Fastboot Kindle Fire logo on my screen. Unfortunately I didn't set up any recovery before hand (that I know of) and my computer doesn't seem to be recognizing the device.
I've tried following this guide but don't quite understand what to do in step two (I've downloaded ADK and am thoroughly confused).
What are my next steps here for getting my device un-bricked? Any help or guidance at all would be much appreciated.
Thanks!
Click to expand...
Click to collapse
Hi,
Good that you have a fastboot cable. First, Windows needs to see your device. When you go into Device Manager, what do you see? Do you see something like TATE-PVT-08 as an unknown device? You need to "install" a driver for that device. Double click the unknown device, select find drivers yourself, and scroll down until you find the Kindle Fire category of devices. Once you click-through that, you should find ADB Composite Device or something like that as an option. After that, Windows should recognize your device, and you should be able to use fastboot commands on it. (By the way, this assumes that you've installed the Kindle ADB device drivers at one point in time)
See this thread for more information about the actual RESTORE commands. (Look under the Restore section of the first post)
http://forum.xda-developers.com/showthread.php?t=1930656
Unfortunately, I don't have a system.img that I can send you. One option is to download Kindle Fire First Aide - that might have access to an older system.img file on it (v7.2.3) which will help you. Here's a post on how to download Kindle Fire First Aide:
http://forum.xda-developers.com/showthread.php?t=2096888
Follow each of the steps carefully! Install the Java SE Development Kit, for example.
Hello.
After hours of struggling and Googling (and reading mostly from this forum) I managed to root my KFHD 7.4.6 using bin4ry method. I have two questions about where I'm at right now.
Question 1: While struggling to get adb to recognize my KF, I realized that the problem was quite simple: after installing the special adb drivers, I would plug the Kindle back in and Windows would recognize the device and install the Microsoft drivers - completely ignoring the driver I had just installed. The only way I managed to get around this was to quickly interrupt Windows 7's driver installation and tell it to NOT install drivers from Windows Update.
However, I'm sure there must have been a more elegant way of accomplishing this. What would have been the correct way to do this?
Question 2: Now that adb finally recognizes the KF, and the KF shows up as "Android Composite ADB Interface" in device manager, I want to put Android 4.2.2 on the KF - so CM 10.1. I'm doing preparatory research so I can learn about what I need to do. The big concern for me now is that my KF version is 7.4.6. There seems to be relatively little information about this, and I've seen it explicitly indicated in a few places that only versions before 7.3.something have the exploit available. Does this mean I must first downgrade from 7.4.6? I've had trouble pinning resources down that would help me answer this question - so if anyone has any solid tips about this, I'd appreciate it! I'd really rather not brick it :silly:
Thanks! :good:
SpidaFly said:
Question 2: Now that adb finally recognizes the KF, and the KF shows up as "Android Composite ADB Interface" in device manager, I want to put Android 4.2.2 on the KF - so CM 10.1. I'm doing preparatory research so I can learn about what I need to do. The big concern for me now is that my KF version is 7.4.6. There seems to be relatively little information about this, and I've seen it explicitly indicated in a few places that only versions before 7.3.something have the exploit available. Does this mean I must first downgrade from 7.4.6? I've had trouble pinning resources down that would help me answer this question - so if anyone has any solid tips about this, I'd appreciate it! I'd really rather not brick it :silly:
Click to expand...
Click to collapse
I just found this:
http://forum.xda-developers.com/showthread.php?t=2271909
So the answer to my question appears to be "YES", correct? It appears that I need to flash back to 7.2.3?
Question 1 still remains unsolved.
Well you could downgrade it, I don't know if the latest update causes problems, but the thing that needs downgrading isn't the os, its the bootloader. I suggest the fireflash method in seokhuns tutorial, the one you linked. Just make sure to check the first box at the top in fire flash or you will have a red screen brick, which requires a fastboot cable to fix. Also I have never heard of windows update having drivers for the kindle, I mean I usually hit skip anyways, I believe the more elegant solution may have come with kindle fire first aid, not positive though.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Thanks!
I'm having another little inconsistency now.
I disconnect and power off my KF.
I run in cmd: fastboot -i 0x1949 getvar product
It says < waiting for device >
I then plug in my (powered off) KF, and it boots up NORMALLY, and fastboot doesn't return the expected tate-xxx.
Any ideas why?
My ADB is seeing the device. (ie. adb devices is returning one device).
Your fastboot drivers aren't working.
soupmagnet said:
Your fastboot drivers aren't working.
Click to expand...
Click to collapse
Indeed. Can this be solved by wiping existing drivers and reinstalling Amazon's USB drivers from sdk/extras/amazon ?
EDIT: I've attempted reinstall twice with no improvement. ADB works, fastboot won't.
Um I thought that command only worked on a 8.9" kindle to get it into fastboot.try this instead:
Adb shell su -c "reboot bootloader"
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Um I thought that command only worked on a 8.9" kindle to get it into fastboot.try this instead:
Adb shell su -c "reboot bootloader"
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Interesting. I tested that. adb shell su -c "reboot bootloader" does indeed put my device in fastboot mode, and fastboot -i 0x1949 reboot takes it out.
Interesting. Seokhun's tutorial seems to indicate that fastboot -i 0x1949 getvar product should do it as well... so it seems that my fastboot drivers are... kinda half working? Or something?
SpidaFly said:
Interesting. I tested that. adb shell su -c "reboot bootloader" does indeed put my device in fastboot mode, and fastboot -i 0x1949 reboot takes it out.
Interesting. Seokhun's tutorial seems to indicate that fastboot -i 0x1949 getvar product should do it as well... so it seems that my fastboot drivers are... kinda half working? Or something?
Click to expand...
Click to collapse
That option may have been removed in later versions of the bootloader. Some have had success with it while others apparently haven't. If the reboot command works, your drivers should be working properly.
soupmagnet said:
That option may have been removed in later versions of the bootloader. Some have had success with it while others apparently haven't. If the reboot command works, your drivers should be working properly.
Click to expand...
Click to collapse
Sounds good, thanks. I'm following that tutorial even though it's for 7.4.3, and I'm on 7.4.6. I hope that doesn't cause any issues - but 7.4.6 looks like it's pretty new, so I don't see other options.
Ok - I've followed the aforementioned tutorial precisely up to step 4. When I try to boot the kindle up, it shows orange logo, then blue logo, then looks like it's trying to boot normally, then sends me into TWRP.
Is this what is called "boot loop"?
At this point my PC doesn't see the sdcard so I can't get CM/Gapp copied over.
Would it be safe to push CM & Gapp to the sdcard using adb, then resume with TWRP?
EDIT: Still can't boot into the system. Just sideloaded CM 10.1 ROM onto the sdcard. Safe to continue with Step 4, wipe stuff, and install the CM rom?
SpidaFly said:
EDIT: Still can't boot into the system. Just sideloaded CM 10.1 ROM onto the sdcard. Safe to continue with Step 4, wipe stuff, and install the CM rom?
Click to expand...
Click to collapse
This ended up working.
However, now with CM 10.1, my PC isn't recognizing the device for MTP. It still does recognize it as an ADB device, but ADB doesn't see it.
Odd that MTP isn't working, u can always switch to pptp mode if that helps, but everything goes to the dcim folder on the sdcard.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Odd that MTP isn't working, u can always switch to pptp mode if that helps, but everything goes to the dcim folder on the sdcard.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Got it working. Basically just uninstalled the existing drivers and reinstalled standard drivers. Works like a charm. I love CM, this is great! Thanks all, for the help!
I'll worry about getting adb going again later.
Members,
I need your help for my KINDLE fire 7 " HD stuck at bootlogo. I just came back from work and switched on my KINDLE but it booted and got stuck at 'KINDLE FIRE' boot logo. I tried every possible troubleshooting method, like giving hard reset but nothing works. It switches ON and gets stuck at the LOGO. Going by the forums I know that I need a fastboot cable which I have already ordered and expecting the delivery.
Can you plz guide me how to proceed once I have the cable with me ?
Thanks in advance for your time.
ank707 said:
Members,
I need your help for my KINDLE fire 7 " HD stuck at bootlogo. I just came back from work and switched on my KINDLE but it booted and got stuck at 'KINDLE FIRE' boot logo. I tried every possible troubleshooting method, like giving hard reset but nothing works. It switches ON and gets stuck at the LOGO. Going by the forums I know that I need a fastboot cable which I have already ordered and expecting the delivery.
Can you plz guide me how to proceed once I have the cable with me ?
Thanks in advance for your time.
Click to expand...
Click to collapse
You'll be fine once your fastboot cord arrives. Reference this topic http://forum.xda-developers.com/showthread.php?p=37169349 to return to 7.2.3 stock. And reference this video http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw to get your ADB drivers properly installed.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
LinearEquation said:
You'll be fine once your fastboot cord arrives. Reference this topic http://forum.xda-developers.com/showthread.php?p=37169349 to return to 7.2.3 stock. And reference this video http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw to get your ADB drivers properly installed.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
Thanks bro....as soon as I will give it a try I will let you know. Thanks again
LinearEquation said:
You'll be fine once your fastboot cord arrives. Reference this topic http://forum.xda-developers.com/showthread.php?p=37169349 to return to 7.2.3 stock. And reference this video http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw to get your ADB drivers properly installed.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
Hey brother....help me please. I now have the factory cable and I have gone through the page that u suggested. But there seems to be instructions without factory cable and I am getting a lot confused. Can you please suggest me how to proceed on this ?
ank707 said:
Hey brother....help me please. I now have the factory cable and I have gone through the page that u suggested. But there seems to be instructions without factory cable and I am getting a lot confused. Can you please suggest me how to proceed on this ?
Click to expand...
Click to collapse
Fastboot cord uses fastboot commands while in fastboot. This is the link to Kindle Fire FirstAid http://forum.xda-developers.com/showthread.php?t=2096888 Once you follow the steps for setup and run it, you will choose number 3 to go back to 7.2.3 When asked if you want to reboot into fastboot, choose no because you are in fastboot.
You can use the regular USB to get into fastboot mode but not now that you are in a bootloop. After running KFFA to restore to 7.2.3 you will also use it to root and remove OTA updates then install gapps or if you are going to go custom romm with 2nd bootloader and TWRP recovery, skip gapps and move on to the latter. Do NOT use KFFA to install TWRP/2nd bootloader or any ROM. Use FireFlash.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
---------- Post added at 02:15 AM ---------- Previous post was at 01:58 AM ----------
I'm heading to bed in an hour. Be 12 hours and I will be back on again. If you have questions or get confused, ask away so we can get you squared away.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
LinearEquation said:
Fastboot cord uses fastboot commands while in fastboot. This is the link to Kindle Fire FirstAid http://forum.xda-developers.com/showthread.php?t=2096888 Once you follow the steps for setup and run it, you will choose number 3 to go back to 7.2.3 When asked if you want to reboot into fastboot, choose no because you are in fastboot.
You can use the regular USB to get into fastboot mode but not now that you are in a bootloop. After running KFFA to restore to 7.2.3 you will also use it to root and remove OTA updates then install gapps or if you are going to go custom romm with 2nd bootloader and TWRP recovery, skip gapps and move on to the latter. Do NOT use KFFA to install TWRP/2nd bootloader or any ROM. Use FireFlash.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
---------- Post added at 02:15 AM ---------- Previous post was at 01:58 AM ----------
I'm heading to bed in an hour. Be 12 hours and I will be back on again. If you have questions or get confused, ask away so we can get you squared away.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
Yes, I did that and then reboot my Kindle. But it's same and still stuck at boot logo.
Edit: Now it doesn't even turn ON, seems like the battery has drained. Tried wall charger for all night but still dont boots up. Plugged in the fastboot cable but nothing is happening. Please help :crying::crying:
ank707 said:
Yes, I did that and then reboot my Kindle. But it's same and still stuck at boot logo.
Edit: Now it doesn't even turn ON, seems like the battery has drained. Tried wall charger for all night but still dont boots up. Plugged in the fastboot cable but nothing is happening. Please help :crying::crying:
Click to expand...
Click to collapse
So you're saying that you had a bootloop and you ran Kindle Fire FirstAide. Which numbers/options did you press? Plugging that fastboot cord in will power your Kindle Fire HD and send it into fastboot no matter the battery charge. Where did you get the fastboot cord from? A reliable source? I'm only asking because if the battery were low and the wire that connects pins 1 to 4 (think) that energize the Kindle into fastboot mode are somehow faulty, then this would stop the kindle from going into fastboot. However, if the fastboot cord is working, it would seem you have a hard brick. I will look around to see if there is a solution for this.
LinearEquation said:
So you're saying that you had a bootloop and you ran Kindle Fire FirstAide. Which numbers/options did you press? Plugging that fastboot cord in will power your Kindle Fire HD and send it into fastboot no matter the battery charge. Where did you get the fastboot cord from? A reliable source? I'm only asking because if the battery were low and the wire that connects pins 1 to 4 (think) that energize the Kindle into fastboot mode are somehow faulty, then this would stop the kindle from going into fastboot. However, if the fastboot cord is working, it would seem you have a hard brick. I will look around to see if there is a solution for this.
Click to expand...
Click to collapse
Thanks for help mate. I bought it from amazon and it seemed to be the most reliable source http://www.amazon.com/EarlyBirdSavi...ywords=kindle+factory+cable&tag=s601000020-20
I firstly reboot the bootloader couple of times like people suggested me. When that didn't help I restored it and like i gave a detail in other post that it took fair amount of time like 45 mins of reading and writing the .img files. Even the message was prompted that 'Your kindle has been restored to 7.2.3, the only thing is that all this while the display of my Kindle didn't changed and was fixed on 'Fastboot Kindle fire' logo. I was disappointed with this device from start due to that crappy kindle OS which made it way too slow and things kept freezing and crashing all the time. Since I am in colombia and used a freight service for this cable to be delivered, i ended up paying 30 USD for the cable. I don't think I will be sending it for repair , it just don't worth it the expenses for the repair and the shipping cost from Colombia and vice versa. May be will keep experimenting and looking on XDA if at some point of time hard brick issue could be fixed.
Not to ring up the past...
But, I cannot get my kindle to work with adb to save my life.
I have the adb drivers
Fastboot finds the device
Its stuck in bootloop so the only to communicate with it is though fastboot cable.
please help
eddielane71488 said:
But, I cannot get my kindle to work with adb to save my life.
I have the adb drivers
Fastboot finds the device
Its stuck in bootloop so the only to communicate with it is though fastboot cable.
please help
Click to expand...
Click to collapse
adb doesn't work with fastboot, only fastboot commands work with fastboot.
Stuck in bootloop after accidentally converting KFHD Launcher to user app on Titanium
Please Help! My KFHD IS Stuck in bootloop after I accidentally converted Kindle Launcher from system app to user app on Titanium. the kindle continues to run in the background but the image is stuck on the animated kindle fire logo. Any ideas/help would be really appreciated! Thanks
Compilasian said:
Please Help! My KFHD IS Stuck in bootloop after I accidentally converted Kindle Launcher from system app to user app on Titanium. the kindle continues to run in the background but the image is stuck on the animated kindle fire logo. Any ideas/help would be really appreciated! Thanks
Click to expand...
Click to collapse
Reflash the system img. I don't know if you can make changes to an apk via adb.
Kindle fire stuck in Bootloop > Reply to Thread
Rushead said:
Reflash the system img. I don't know if you can make changes to an apk via adb.
Click to expand...
Click to collapse
Thanks for the reply! Unfortunately, I can't turn ADB debugging on because there is no way to get access to the menu system. Is there another manner of fastbooting and of reflashing image you can possibly recommend to bypass not having access to the launcher? Again thanks in advance!
I'm not sure what is possible via fb other than adb. Try googling flash factory image & see what you find. Sorry I can't be of more help.
Compilasian said:
Thanks for the reply! Unfortunately, I can't turn ADB debugging on because there is no way to get access to the menu system. Is there another manner of fastbooting and of reflashing image you can possibly recommend to bypass not having access to the launcher? Again thanks in advance!
Click to expand...
Click to collapse
Yes,there is. The following commands will flash the boot,recovery and system images while in fastboot.
Code:
fastboot -i 0x1949 flash boot boot.img
fastboot -i 0x1949 flash recovery recovery.img
fastboot -i 0x1949 flash system system.img
Hi im having problems with my kindle fire hd 2nd gen. I rooted and installed cm12 or 13 on it and it was working well but i lost root so i flashed Supersu through twrp now my device is bootlooping on the amazon fire boot screen. I couldn't get into fastboot so bought a fastboot cable which has arrived today (2 weeks from china) now when i plug it in the device goes into fastboot mode but my windows 10 shows it in device manager as Other Devices Tate -pvt-08. I cant issue commands through ADB (adb devices just shows nothing connected) if i enter the getvar command i just get waiting for device. I've reinstalled the kindle device driver and still no joy.
I also made a complete backup of my kindle before i rooted it which i have stored safely. but i need to know how i can push them to my kindle and how to make my laptop see the kindle.
I'm struggling now and pretty lost with it all if someone could lend a hand and tell me what im doing wrong
Corduroysack said:
Hi im having problems with my kindle fire hd 2nd gen. I rooted and installed cm12 or 13 on it and it was working well but i lost root so i flashed Supersu through twrp now my device is bootlooping on the amazon fire boot screen. I couldn't get into fastboot so bought a fastboot cable which has arrived today (2 weeks from china) now when i plug it in the device goes into fastboot mode but my windows 10 shows it in device manager as Other Devices Tate -pvt-08. I cant issue commands through ADB (adb devices just shows nothing connected) if i enter the getvar command i just get waiting for device. I've reinstalled the kindle device driver and still no joy.
I also made a complete backup of my kindle before i rooted it which i have stored safely. but i need to know how i can push them to my kindle and how to make my laptop see the kindle.
I'm struggling now and pretty lost with it all if someone could lend a hand and tell me what im doing wrong
Click to expand...
Click to collapse
hi did you ever figure out the issue? i'm also in the same boat, was running with cm13, tried to flash super su using twrp got the boot loop. will go till the white and orange logo and reboots
thomas69k said:
hi did you ever figure out the issue? i'm also in the same boat, was running with cm13, tried to flash super su using twrp got the boot loop. will go till the white and orange logo and reboots
Click to expand...
Click to collapse
cant remember what i did tbh, ive just fired my kndle up first time in a while and the rom im using is Omni Rom 6.0 its old (2016) but works. i remember using adb to push backed up partition images and literally started from scratch. Not much help but it was quite some time ago
thinking of trying this rom at some point as its 2018
https://www.mediafire.com/folder/u7sb7p10ik7v0/tate
Hello all so took it upon myself to try and help my father out with his tablet. Tried the steps outlined in this post http://forum.xda-developers.com/showpost.php?p=45946493&postcount=3004 The unit wasn't on the 7.2.3 bootloader so i proceeded to flash that before following the steps outline in that post. Not the tablet will try to boot but not stay on. Is there a way for me to save it or is it done?
Tried the following:
This relies on you having a working device (as long as it can boot at all, you're good). If you wish to enter fastboot mode to flash system images like new versions of TWRP or restore Amazon OS 7.2.3 if you've got freezing or bootloops, then you need a regular USB cable that came with the device, or any other mini-USB cable that fits the device and the computer. Again, you need to have Android SDK installed before you can use fastboot. Turn the device off, and leave it unplugged. Go to your computer, open command prompt, and type this:
Code:
fastboot -i 0x1949 getvar product
Hit enter, and it should return with <waiting for device>. If it doesn't, your fastboot drivers aren't working. Install Android SDK and go from there. If it does, connect your turned-off Kindle to the computer. Two things will happen: one, the command prompt will show "Tate-xxx-xxx" (something there), and two, your Kindle should reboot into fastboot mode. To exit fastboot mode, after you finished flashing what you needed, type this:
Code:
fastboot -i 0x1949 reboot
If you can fully boot into the ROM, you can use ADB to boot into fastboot, but you must still use the same command above to reboot out of fastboot mode. Then make sure ADB is turned on through settings, connect the device to the computer using a regular USB cable, and type this:
Code:
adb shell su -c "reboot bootloader"
And that's all for the basics! Let's move on to the actual process.
Click to expand...
Click to collapse
Still nothing the tablet boots to the logo and shuts down. Will i need to purchase one of the fastboot cables or a nexus 7?
If it's a kfhd 7" or kf2, then a fastboot cable is your best bet, the fastboot getvar product command only works on a 8.9" model unless you have 2nd boot loader on the other models.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Damn well that's better then having to pay for a new tablet. I put it on the charger after reading that it may be a charging issue. I know it only trickle charges through USB. It still does the same thing but where the screen would be black behind the kindle fire logo it is green with lines running through it. I will let it charge try again and then buy the cable if anything. Any other thoughts or ideas?
Uh I hope the boot loader isn't damaged too bad, I haven't heard of green lines going through it before, usually if something goes bad with the 2nd bootloader installation process(aka not downgrading first) it results in a red screen. This is probably due to a bad download of the boot loader, that's why it is always key to check the md5sum of the boot loader before you downgrade it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Aali1011 said:
Damn well that's better then having to pay for a new tablet. I put it on the charger after reading that it may be a charging issue. I know it only trickle charges through USB. It still does the same thing but where the screen would be black behind the kindle fire logo it is green with lines running through it. I will let it charge try again and then buy the cable if anything. Any other thoughts or ideas?
Click to expand...
Click to collapse
Lines in the screens, good LCD screen not withstanding, are not good. Normally this is a firmware issue that required Amazon to send a replacement. Let's hope KFFA restores everything for you.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
LinearEquation said:
Lines in the screens, good LCD screen not withstanding, are not good. Normally this is a firmware issue that required Amazon to send a replacement. Let's hope KFFA restores everything for you.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
I let it charge overnight and booted it and it is still only booting to the kindle fire logo and shutting down. Luckily the screen is black now rather than the green I mentioned. So is my best course of action the fast boot cable and then KFFA? I will try the fastboot commands again when i get home. Is KFFA only going to help me in the sense of restoring the files or will it potentially help me with the fastboot process as well? The above method that I used with the fireflash 11 is that proper or should i be doing it some other way?
I personally think the fire flash method is the easiest, some people brick though because they don't follow the instructions properly, I don't think this was the case with you though. That kindle is more than likely not going to go into fastboot with commands, that typically is a 8.9" thing unless you have a successful flash of 2nd bootloader. I know kffa restores the system partition and recovery and boot, but I am unaware if it flashes the boot loader, and I am pretty sure you definitely need to reflash the bootloader since it had lines through it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Aali1011 said:
I let it charge overnight and booted it and it is still only booting to the kindle fire logo and shutting down. Luckily the screen is black now rather than the green I mentioned. So is my best course of action the fast boot cable and then KFFA? I will try the fastboot commands again when i get home. Is KFFA only going to help me in the sense of restoring the files or will it potentially help me with the fastboot process as well? The above method that I used with the fireflash 11 is that proper or should i be doing it some other way?
Click to expand...
Click to collapse
You must have a fastboot factory cord, not a regular USB. Watch this video to make sure you have your ADB driver set up right http://www.youtube.com/watch?v=oaNM-lt_aHw Use KFFA to restore to 7.2.3. Choose that option as Hashcode has a 7.2.3 boot.img that will match the firmware you will be using, reducing the chance or bootlooping a great deal.
---------- Post added at 05:04 PM ---------- Previous post was at 04:57 PM ----------
Aali1011 said:
I let it charge overnight and booted it and it is still only booting to the kindle fire logo and shutting down. Luckily the screen is black now rather than the green I mentioned. So is my best course of action the fast boot cable and then KFFA? I will try the fastboot commands again when i get home. Is KFFA only going to help me in the sense of restoring the files or will it potentially help me with the fastboot process as well? The above method that I used with the fireflash 11 is that proper or should i be doing it some other way?
Click to expand...
Click to collapse
If your going to use FireFlash, you can go to seokhun's thread and read uo on flashing the 2nd bootloader / TWRP http://forum.xda-developers.com/showthread.php?t=2271909
Some great info about this on Opemsystem's thread as well. http://forum.xda-developers.com/showthread.php?t=2347170
Hashcode's thread has the files you need to flash. If you choose 7.2.3, use boot.img 7.2.3 located right below step 4 of Hascodes thread. Not number 4 of step 2, but right below step 4 and the TWRP 2.6.1.0 in his original post. http://forum.xda-developers.com/showthread.php?t=2128848