Database Develop

[Q] No usb, how to upgrade to Froyo?

My Galaxy S cannot connect to PC by usb, I tried many ways but failed. Now I give up (maybe the usb port is broken). Is it possible that upgrade to 2.2 without usb?

Your suspect the USB port on your Phone is broken ??? send it off for repair.
Are you on stock ROM at present ? and do you have CWM or 2e recovery. if you dont have that then you cant do it, unless you check the over the air update under settings.

azzledazzle said:
Your suspect the USB port on your Phone is broken ??? send it off for repair.
Are you on stock ROM at present ? and do you have CWM or 2e recovery. if you dont have that then you cant do it, unless you check the over the air update under settings.
Click to expand...
Click to collapse
I can enter the recovery mode, but I don't know where I can download the update.zip file. And is it enough just put this file in /sdcard/?

can enter the recovery mode, but I don't know where I can download the update.zip file. And is it enough just put this file in /sdcard/?
You can transfer the file from the sd card to the internal sd card .
Or use Rom Kitchin mobile version download to your phone .
But as always no usb means no recovery if anything goes wrong .
http://forum.xda-developers.com/showthread.php?t=817703
http://romkitchen.org/m/
jje

oh.... Looks a little complicated. I need time to study. Anyway, thanks very much.

Is there a "gold" update.zip which I just download and upload?

lawrencelee said:
Is there a "gold" update.zip which I just download and upload?
Click to expand...
Click to collapse
i dont know what you mean by that but you can connect to wifi and go to your download site e.g XDA follow the links to the download, then when its downloaded Boot into recovery and flash it.
You have to have CWM or 2e recovery tho,

I had the same problem 2 days
Read that post, I hope it will help
http://forum.xda-developers.com/showthread.php?t=1001772

Clean the port with Alcohol
Try cleaning the usb port with alcohol. Its tiny but try and do what you can gently. I thought mine was broken too as I had tried everything (including ubuntu/linux). Then in a linux forum I read about cleaning the port. When I did that I tried in windows again and lots of drivers came up instantly. It was a good day!
As far as getting Froyo, thats pretty easy. just get a kernel (like hardcores) using an update zip and then go to most custom roms and follow the directions for CWM (clockwork mod) which you will have if with the kernel.
But the other poster is right, you can't reflash to stock if things go badly. So you might keep trying to get a PC connection where Odin or heimdall will work just in case. I ended up stuck with a custom rom when my internal SD card died (I have one of the infamous i9000m models) but it was no issue for the repair but I suspect that is because they had done thousands of the repairs by that time in Canada.
Good luck.

[Q] USB Debugging CM10 and V30I

Hey guys, since i flashed CM10 and/or V30I KU5900 i have some problems with USB Debugging, i cannot use QtADB, or flash the CWM for example .
All drivers are installed but it just doesn't show up D:
Any suggestions?
Thanks for your Help .

In cm10 change your mode from MTP to camera. So just pull down the topbar, find the USB option there, while plugged to USB, open it, change it to Camera, unplug USB, plug in again and that's it.
For KU5900 repack, I cant tell you, but it should work similar. Dont forget to enable usb debugging in settings

N00BY0815 said:
In cm10 change your mode from MTP to camera. So just pull down the topbar, find the USB option there, while plugged to USB, open it, change it to Camera, unplug USB, plug in again and that's it.
For KU5900 repack, I cant tell you, but it should work similar. Dont forget to enable usb debugging in settings
Click to expand...
Click to collapse
Well, it looks like it's working as USB Transfer on CM10 with CWM Flash but QtADB doesn't seen to work
I can't download the newest version of QtADB, i don't know why, it just doesn't connect, so i'm using the 0.7.3 version .
If you can mirror it i'd be glad

Nikitozin said:
Well, it looks like it's working as USB Transfer on CM10 with CWM Flash but QtADB doesn't seen to work
I can't download the newest version of QtADB, i don't know why, it just doesn't connect, so i'm using the 0.7.3 version .
If you can mirror it i'd be glad
Click to expand...
Click to collapse
Sorry, I am on Linux now, when working with Android... So I only use the "real adb"

N00BY0815 said:
Sorry, I am on Linux now, when working with Android... So I only use the "real adb"
Click to expand...
Click to collapse
Okay XD
Thanks for the help once more : )

Added a mirror for you above

hey this is my first post so correct me if i do many mistake
i have rooted my phone LGp970 very first time...
now i have flashed the korean LG-KU5900 ICS V30I...
and now i can't use my menu,home,back,and search keys...
i can only use them if i put my cell to charge...
any solution for that..
or i m the only one having this problem???
i have read all the topics related to rooting,flashing,unbricking,etc before rooting my phone....
still i can be wrong.....but su is there after rooting...
btw i flashed using "ROM Manager" (i guess only method available for noobs like me)
i had wiped dalvik data(or cache idk) and wiped data also...and done nandroid backup saperately......
one mere thing while backing up some file named sd xlm(or idk) skipped....should i bother about it
.
.
.
.
.
.help me every possible way.....please
cause i can't access my sd as sd in korean ICS V30I because it shows it as internal storage....and i have only one phone so quick reply would be appriciated.....
an sorry for bad english....

rony3964 said:
i have rooted my phone LGp970 very first time...
now i have flashed the korean LG-KU5900 ICS V30I...
and now i can't use my menu,home,back,and search keys...
i can only use them if i put my cell to charge...
any solution for that..
or i m the only one having this problem???
i have read all the topics related to rooting,flashing,unbricking,etc before rooting my phone....
still i can be wrong.....but su is there after rooting...
btw i flashed using "ROM Manager" (i guess only method available for noobs like me)
i had wiped dalvik data(or cache idk) and wiped data also...and done nandroid backup saperately......
one mere thing while backing up some file named sd xlm(or idk) skipped....should i bother about it
.
.
.
.
.
.help me every possible way.....please
cause i can't access my sd as sd in korean ICS V30I because it shows it as internal storage....and i have only one phone so quick reply would be appriciated.....
an sorry for bad english....
Click to expand...
Click to collapse
first of all, try rebooting into recovery(cwm)
if you can't, download an app called quickboot or titanium backup
from your pc, download the sd card fix from the thread
with that, reboot into recovery
wipe data, cache, dalvik
then re-install the rom
afterwards install the sdcard fix

theaks30 said:
first of all, try rebooting into recovery(cwm)
if you can't, download an app called quickboot or titanium backup
from your pc, download the sd card fix from the thread
with that, reboot into recovery
wipe data, cache, dalvik
then re-install the rom
afterwards install the sdcard fix
Click to expand...
Click to collapse
it will fix my menu key,home key problem also right???

Problem with my s3 mini GT-I8190 reboot every 20 or 30 seconds

I write here to help me solve a problem with the mini s3 after turning not spend 30 seconds when powered down or rebooted ...
I did full wipes and reset from recovery and nothing .. I did the * 2767 * 3588 # either .. by odin I did a wipeI8190.md5 and nothing .. the cel turns back on as your last finished reboot .. in fact if I make a modification before they shut down or restart the phone back and not assumes the change .. and the USB debugging is not activated
I wonder if anyone happened to this and can help me.. the warranty is lost
thanks

First thing is to see if stock firmware in odin can help.

tys0n said:
First thing is to see if stock firmware in odin can help.
Click to expand...
Click to collapse
Yes is stock firmware.. theres no modificartion...
could manage to keep it active and enter the ram and select delete but when spend time the phone restart again, in fact delete all applications and messages and when I hes restart put everything back like used to be... and alsdo did the reset factory default and nothing hes restart over again with the same phone profile

flash http://megafiles.me/s/param_i8190-tar-md5 with Odin and reboot

JackoMJ said:
flash param_i8190-tar-md5 with Odin and reboot
Click to expand...
Click to collapse
also did that and still boot with the same configuration..
I'll make a video and I will upload to youtube

it seems is related to a material issue. i thought it's on your power button !

redomix said:
it seems is related to a material issue. i thought it's on your power button !
Click to expand...
Click to collapse
i dont think so.. i will post 2 videos showin the problem

here's the videos
is in spanish but i think is tunderstandable
youtube.com/watch?v=EZhKPInC5r4
and the second
youtube.com/watch?v=hT8e6T0ymJo
if you see in the last part of the second video i did the factory reset and the phone restart without nothing happend

i think you should flash TWRP or clockworkmod, make a backup of your files also the present rom,
After that, flash with a new rom like Cyanogenmod 10.2 from Maclaw and revert with the difference, maybe the problem will be fixed..

redomix said:
i think you should flash TWRP or clockworkmod, make a backup of your files also the present rom,
After that, flash with a new rom like Cyanogenmod 10.2 from Maclaw and revert with the difference, maybe the problem will be fixed..
Click to expand...
Click to collapse
i can not flash becouse the phone not assumes any changes.. with odin i flash in the PDA a recovery.img a CWM and nothing.. even im update from chache/fota upadte of recovery and he gave me this error...
img183.imagevenue.com/img.php?image=96227_20131210_231941_122_127lo.jpg
i think the problem that the phone no assumes anything with flashing is because is before hes broke or whatever happend to this F%$& is the USB debugging is not marked.. but i dont really now :S

try first flashing TWRP recovery.. can really help.. !

redomix said:
try first flashing TWRP recovery.. can really help.. !
Click to expand...
Click to collapse
can i do that without USB debbugin?
how can i see a tuto or something... im really new in this.. please...

you can do it with your android recovery, mount you internal or external sdcard with android recovery, download TWRP with zip format. and flash it within your android recovery with install.zip.
You can search on Youtube for tutorials.

redomix said:
you can do it with your android recovery, mount you internal or external sdcard with android recovery, download TWRP with zip format. and flash it within your android recovery with install.zip.
You can search on Youtube for tutorials.
Click to expand...
Click to collapse
men you see the videos? i cant put the USB debbugin mode plus everytime then i flash anything on the phone when he reboot the phone no make any change. still the same like you see in the 2 videos that i post on the other messages..
thanks for trying to help.. :good:

Hey Brother,
Very Welcome, yes i've seen the videos, try to mount the internal sdcard with android recovery and copy the twrp recovery, or use another phone and copy the twrp file onto external SD Card, there's an option on recovery called update.zip flash with it,
if there's no change at all, try to flash it with ODIN.. if it don't recognize due to absence of USB Debugging, there's a tool called Samsung GS3 Mini ToolKit. maybe can help you. if not try with samsung KIES .. if also nothing helped you at this point, search around the internet for your problem, maybe you can find some useful help..
Cordially, I.R.

redomix said:
Hey Brother,
Very Welcome, yes i've seen the videos, try to mount the internal sdcard with android recovery and copy the twrp recovery, or use another phone and copy the twrp file onto external SD Card, there's an option on recovery called update.zip flash with it,
if there's no change at all, try to flash it with ODIN.. if it don't recognize due to absence of USB Debugging, there's a tool called Samsung GS3 Mini ToolKit. maybe can help you. if not try with samsung KIES .. if also nothing helped you at this point, search around the internet for your problem, maybe you can find some useful help..
Cordially, I.R.
Click to expand...
Click to collapse
hey men.. take a look at thsi image
img183.imagevenue.com/img.php?image=96227_20131210_231941_122_127lo.jpg
this is what happend when i do the update.zip..
im searching all over the internet and anybody has put som help.. in fact this is the 3rd forum that i put this problem...
thanks again..

foxdie99 said:
hey men.. take a look at thsi image
img183.imagevenue.com/img.php?image=96227_20131210_231941_122_127lo.jpg
this is what happend when i do the update.zip..
im searching all over the internet and anybody has put som help.. in fact this is the 3rd forum that i put this problem...
thanks again..
Click to expand...
Click to collapse
actually its really simple to solve this problem...
1 - download and install the samsung drivers from here (http://get.maclaw.pl/?id=61)
2 - download odin here and install it.
3 - reboot your pc (this is the easy way to kill all kies processes and unwanted things) and make shure that kies dont start with windows.(if you have it installed)
4 - download this http://get.maclaw.pl/?id=301 (its the maclaw cm 4.4.2 for odin with the recovery twrp)
5 - flash the phone with odin(FOR THIS YOU NEED TO BOOT THE PHONE IN DOWNLOAD MODE, just boot the phone pressing POWER+VOLUME DOWN AND THE HOME BUTTON until a triangle and a warning appears follow maclaws guide -> http://maclaw.pl/installation-guide-golden/)... as soon as the flash finishes you'll be trapped in a boot loop (missing GAPPS)
just try to boot it the system should crash dont worry you're on the good way.
5.2 - remove the battery and put it back in (now you phone should be off)
6 - reboot on the new recovery that comes with the maclaw Rom you've just flashed for that you need to press POWER + VOLUME UP AND HOME BUTTON and mount you SD CARD.(you phone sould appear on you pc as a storage device or something like that)
7 - download this GAPPS here(http://get.maclaw.pl/?id=164)
8 - copy the downloaded GAPPS to you phone.
9 - go back to the 1st menu of the TWRP (a.k.a recovery) and you should see a thing saying install zip or flash zip (something like that)
9.2 - select the Gapps you've downloaded and flash it.
9.3 - after the flash finish select reboot system
9.4 - phone should start installing updates after the reboot
10 - wait until it finishes and the problem should be solved. now you can go back to the stock rom or stay with this rom.
the problem here is there's an app causing that problem. i had the same problem a few months ago.
the phone whould just crash or not function at all, rebooting all the time or from time to time...(it was one of the games i've installed from market)
after the phone is working dont install apps from unknow developers. even if it is from the market (believe wen i say you can get apps from the market that makes you're phone to malfunction).

PTGamer said:
actually its really simple to solve this problem...
1 - download and install the samsung drivers from here (http://get.maclaw.pl/?id=61)
2 - download odin here and install it.
3 - reboot your pc (this is the easy way to kill all kies processes and unwanted things) and make shure that kies dont start with windows.(if you have it installed)
4 - download this http://get.maclaw.pl/?id=301 (its the maclaw cm 4.4.2 for odin with the recovery twrp)
5 - flash the phone with odin(FOR THIS YOU NEED TO BOOT THE PHONE IN DOWNLOAD MODE, just boot the phone pressing POWER+VOLUME DOWN AND THE HOME BUTTON until a triangle and a warning appears follow maclaws guide -> http://maclaw.pl/installation-guide-golden/)... as soon as the flash finishes you'll be trapped in a boot loop (missing GAPPS)
just try to boot it the system should crash dont worry you're on the good way.
5.2 - remove the battery and put it back in (now you phone should be off)
6 - reboot on the new recovery that comes with the maclaw Rom you've just flashed for that you need to press POWER + VOLUME UP AND HOME BUTTON and mount you SD CARD.(you phone sould appear on you pc as a storage device or something like that)
7 - download this GAPPS here(http://get.maclaw.pl/?id=164)
8 - copy the downloaded GAPPS to you phone.
9 - go back to the 1st menu of the TWRP (a.k.a recovery) and you should see a thing saying install zip or flash zip (something like that)
9.2 - select the Gapps you've downloaded and flash it.
9.3 - after the flash finish select reboot system
9.4 - phone should start installing updates after the reboot
10 - wait until it finishes and the problem should be solved. now you can go back to the stock rom or stay with this rom.
the problem here is there's an app causing that problem. i had the same problem a few months ago.
the phone whould just crash or not function at all, rebooting all the time or from time to time...(it was one of the games i've installed from market)
after the phone is working dont install apps from unknow developers. even if it is from the market (believe wen i say you can get apps from the market that makes you're phone to malfunction).
Click to expand...
Click to collapse
Good tutorial bro, this is the same what i'm talking about.. it should work with these method.. waiting your reply.

PTGamer said:
actually its really simple to solve this problem...
1 - download and install the samsung drivers from here (http://get.maclaw.pl/?id=61)
2 - download odin here and install it.
3 - reboot your pc (this is the easy way to kill all kies processes and unwanted things) and make shure that kies dont start with windows.(if you have it installed)
4 - download this http://get.maclaw.pl/?id=301 (its the maclaw cm 4.4.2 for odin with the recovery twrp)
5 - flash the phone with odin(FOR THIS YOU NEED TO BOOT THE PHONE IN DOWNLOAD MODE, just boot the phone pressing POWER+VOLUME DOWN AND THE HOME BUTTON until a triangle and a warning appears follow maclaws guide -> http://maclaw.pl/installation-guide-golden/)... as soon as the flash finishes you'll be trapped in a boot loop (missing GAPPS)
just try to boot it the system should crash dont worry you're on the good way.
5.2 - remove the battery and put it back in (now you phone should be off)
6 - reboot on the new recovery that comes with the maclaw Rom you've just flashed for that you need to press POWER + VOLUME UP AND HOME BUTTON and mount you SD CARD.(you phone sould appear on you pc as a storage device or something like that)
7 - download this GAPPS here(http://get.maclaw.pl/?id=164)
8 - copy the downloaded GAPPS to you phone.
9 - go back to the 1st menu of the TWRP (a.k.a recovery) and you should see a thing saying install zip or flash zip (something like that)
9.2 - select the Gapps you've downloaded and flash it.
9.3 - after the flash finish select reboot system
9.4 - phone should start installing updates after the reboot
10 - wait until it finishes and the problem should be solved. now you can go back to the stock rom or stay with this rom.
the problem here is there's an app causing that problem. i had the same problem a few months ago.
the phone whould just crash or not function at all, rebooting all the time or from time to time...(it was one of the games i've installed from market)
after the phone is working dont install apps from unknow developers. even if it is from the market (believe wen i say you can get apps from the market that makes you're phone to malfunction).
Click to expand...
Click to collapse
well men let me tell you the phone laguh hes ass off to maclaw TWPR hes reboot like before.. hes no assumes anychange... im little impress with this little piece of S%&T...
thanks for the tuto but dont work for me right now
i think is a service from google.. NLplocationreceiver. thats is the only one who`s dont start.. and keeps searchin

foxdie99 said:
well men let me tell you the phone laguh hes ass off to maclaw TWPR hes reboot like before.. hes no assumes anychange... im little impress with this little piece of S%&T...
thanks for the tuto but dont work for me right now
i think is a service from google.. NLplocationreceiver. thats is the only one who`s dont start.. and keeps searchin
Click to expand...
Click to collapse
thats strange at least for me that worked...
meybe you have a faulty memory?

[Q]NEED HELP.I bricked my NOTE3 N900A

i try to add chinese to note3 , but faild, now the phone can not boot , only can into DOWNLOAD mode , and recovery mode , but when into download , USB doesn't work , odin 3.09 can not find port. Tried Heimdall already , still doesn't work , i need help , btw, i tried wiped already , not work.
could i recovery update.zip in recovery mode ? how to make a stock rom to update.zip?
thanks.

[email protected] said:
i try to add chinese to note3 , but faild, now the phone can not boot , only can into DOWNLOAD mode , and recovery mode , but when into download , USB doesn't work , odin 3.09 can not find port. Tried Heimdall already , still doesn't work , i need help , btw, i tried wiped already , not work.
could i recovery update.zip in recovery mode ? how to make a stock rom to update.zip?
thanks.
Click to expand...
Click to collapse
Option 1: Put your phone into download mode, start up Odin in administration mode, plug the phone into your computer. If Odin still does not find it, try another usb port and see if Odin picks up the port. Also be sure you have the latest samsung driver package installed.
Option 2: If you have a factory rom or custom rom downloaded to your phone, you can boot into recovery and install the rom. But you would lose any data that you have not backed up, but it would get your phone out of soft brick status.

strider5236 said:
Option 1: Put your phone into download mode, start up Odin in administration mode, plug the phone into your computer. If Odin still does not find it, try another usb port and see if Odin picks up the port. Also be sure you have the latest samsung driver package installed.
Option 2: If you have a factory rom or custom rom downloaded to your phone, you can boot into recovery and install the rom. But you would lose any data that you have not backed up, but it would get your phone out of soft brick status.
Click to expand...
Click to collapse
option 1 , doesn't work , i changed another pc , still not connect ondin mode ...
option 2 , i hava factory rom in my pc , i can copy to sd card but in recovery mode , it only can flash update.zip , how can i use stock rom to make update.zip ?

[email protected] said:
option 1 , doesn't work , i changed another pc , still not connect ondin mode ...
option 2 , i hava factory rom in my pc , i can copy to sd card but in recovery mode , it only can flash update.zip , how can i use stock rom to make update.zip ?
Click to expand...
Click to collapse
I thought you had Safestrap installed. This one goes above me. The following link might help shed more light on the problem and possibly provide a solution.
http://xda-university.com/as-a-user/how-to-recover-from-a-bootloop

[email protected] said:
i try to add chinese to note3 , but faild, now the phone can not boot , only can into DOWNLOAD mode , and recovery mode , but when into download , USB doesn't work , odin 3.09 can not find port. Tried Heimdall already , still doesn't work , i need help , btw, i tried wiped already , not work.
could i recovery update.zip in recovery mode ? how to make a stock rom to update.zip?
thanks.
Click to expand...
Click to collapse
Sometimes mine acts up too. Try turning the phone off. While connected to the PC Boot into download mode then take the battery out and put it back in. Its weird af but it worked for me when my PC didnt recognize the phone.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app

[email protected] said:
i try to add chinese to note3 , but faild, now the phone can not boot , only can into DOWNLOAD mode , and recovery mode , but when into download , USB doesn't work , odin 3.09 can not find port. Tried Heimdall already , still doesn't work , i need help , btw, i tried wiped already , not work.
could i recovery update.zip in recovery mode ? how to make a stock rom to update.zip?
thanks.
Click to expand...
Click to collapse
Here is a guide to recover from hard brick that will fix your problem. May be a last resort, but it is a viable option of getting your phone back up and running.
http://forum.xda-developers.com/showthread.php?t=2476353

[Q] The phone doesn't recovery ...

Hi to everyone ! ) When i tried to downgrade from emui 3 (b602) to 2.3 (b133) the phone brick .. and since then it gotta no recovery .. and i cant change the rom..when put dload folder and try to make local udate, the phone just reboot .. with 3 bottons, the same .. when i trying to charging it (switched off) it stuck ot huawei logo or just reboot .. even when i go in settings>backup & reset>factpry data reset>reset phone .. and press it, nothing happen ! Also i tried via adb command to install stock recovery, but the results are the same ... Please help me ) And sorry for my bad english

Tix0mir said:
Hi to everyone ! ) When i tried to downgrade from emui 3 (b602) to 2.3 (b133) the phone brick .. and since then it gotta no recovery .. and i cant change the rom..when put dload folder and try to make local udate, the phone just reboot .. with 3 bottons, the same .. when i trying to charging it (switched off) it stuck ot huawei logo or just reboot .. even when i go in settings>backup & reset>factpry data reset>reset phone .. and press it, nothing happen ! Also i tried via adb command to install stock recovery, but the results are the same ... Please help me ) And sorry for my bad english
Click to expand...
Click to collapse
Sadly, you are not alone with this problem. My experience was similar to yours. I solved it by throwing the phone away and buying another. Unfortunately, my second P7 has faulty flash memory and is almost useless. I'm now awaiting the delivery of my third P7. I suggest you buy another and avoid EMUI 3.0. Good luck!

arthios said:
Sadly, you are not alone with this problem. My experience was similar to yours. I solved it by throwing the phone away and buying another. Unfortunately, my second P7 has faulty flash memory and is almost useless. I'm now awaiting the delivery of my third P7. I suggest you buy another and avoid EMUI 3.0. Good luck!
Click to expand...
Click to collapse
Most easily to buy another ... but its not a solution The phone working good, but the problem means i forever must be with those beta emui 3 rom Before i had p6 and i re-flash it may be 20 times and there was no problem ,a those .. p7 full rubbish )) Thanks for your answer

Tix0mir said:
Hi to everyone ! ) When i tried to downgrade from emui 3 (b602) to 2.3 (b133) the phone brick .. and since then it gotta no recovery .. and i cant change the rom..when put dload folder and try to make local udate, the phone just reboot .. with 3 bottons, the same .. when i trying to charging it (switched off) it stuck ot huawei logo or just reboot .. even when i go in settings>backup & reset>factpry data reset>reset phone .. and press it, nothing happen ! Also i tried via adb command to install stock recovery, but the results are the same ... Please help me ) And sorry for my bad english
Click to expand...
Click to collapse
A question? How can you do factory reset through settings when you have a bricked phone? I find this very strange!
If by any chance you still can load the OS, get the quickboot app in the market. It will get you to fastboot and than maybe you can install recovery.
All in all, I still don't understand, is your device bricked (can't load OS, just constant reboots - loops), or you just can' downgrade to EMUI 2.3!
Good luck

ibeqa said:
A question? How can you do factory reset through settings when you have a bricked phone? I find this very strange!
If by any chance you still can load the OS, get the quickboot app in the market. It will get you to fastboot and than maybe you can install recovery.
All in all, I still don't understand, is your device bricked (can't load OS, just constant reboots - loops), or you just can' downgrade to EMUI 2.3!
Good luck
Click to expand...
Click to collapse
Probably "brick" is not the exact word, but everything which i wrote in first post is true .. cant do a factory reset from settings and via 3 buttons and cant flash again emui 3 not only 2.3 and the phone just restarts or stuck on first huawei logo when i try to do that and cant charging when is turn off ..etc .. )) When i get quickboot from market what i have to do with it ? Thanks !

Tix0mir said:
When i get quickboot from market what i have to do with it ? Thanks !
Click to expand...
Click to collapse
To install quickboot you need to load OS which you apparently cannot at the moment. Did you try this: http://forum.xda-developers.com/ascend-p7/help/stock-recovery-stuck-bootloop-t2875935

ibeqa said:
To install quickboot you need to load OS which you apparently cannot at the moment. Did you try this: http://forum.xda-developers.com/ascend-p7/help/stock-recovery-stuck-bootloop-t2875935
Click to expand...
Click to collapse
I totally bricked the phone ... i wrote in fastboot "fastboot flash boot boot.img" and after that the ph0ne begin to restart in timeless circle .. and still do it ... please help emergency ))

Try the method on the first post: http://forum.xda-developers.com/ascend-p7/general/reverting-emui-3-0-to-2-3-t2934277

I fix it ... turned out i was installed wrong boot.img .. may be of huawei p6 and the stock recovery which installed doesnt work .. now instaled working and everything is ok Thanks 4 wish to help me !

I have a similar/the same issue as some people above described.
I reverted from CWM recovery to stock recovery (same stock recovery img as I used before succesfully). Now the phone can only boot to stock recovery (Reboot system now, Wipe data, Wipe cache, are the only options.
The phone is not detected by adb on that screen, so I can't try to reboot to bootloader using ADB. I also can't get into bootloader from volume button + power, because the phone boots immediately to recovery after I turn it off.
Fortunately I managed to solve it, so for reference:
Remove SD card
Place full (no incremental update) update.APP file on external sd card in /dload folder (B609: https://mega.co.nz/#!akcBCZBJ!4jLhlNsH54H-3DHeK3xPkzT3fWIHBR6QtbOllubdz5Q) using a different device (computer)
insert SD card
turn the phone off from the recovery loop by holding all three buttons (VOL+POW) at the same time. It's a bit tricky, but keep trying until the phone is off
Insert the USB cable in your phone and connect it with your computer (haven't tested if it simply needs power, or an ADB enabled computer)
Then immediately press all three buttons again
You should enter recovery again now, but the phone will immediately start flashing the update.APP ROM.
You will lose all user data though!

same problem here
Hello to all,
I had the same problem that my phone doesn't go on and time after time boot fails,
i read this solution and it works great i am updating my phone.
only i take the power + vol down and when the logo came switch vol down to vol up.
thx for youre help and sorry for my bad english
grts rob