Database Develop

No Connection with PC

I cant understand that I couldnt connect i897 to my pc. Beforehands I have never had such a problem. I tried 4 different PC but nothing changed. After plug in it starts to charge my phone and ask me the connection type. I choose mass storage but then nothing happens...
I tried many methods but didnt work. Now I decide to upgrade to KK1 from KH3 but it also didnt recognize my phone in download mode.
HELP

Are you sure you you have the correct drivers? It could be a bad cable. Have you ever used heimdall?
Sent from my ICS powered Captivate.

I tried 3 different cable and all of them were working good before. I uninstalled antivirus program and installed different drivers and many other stuff to have healty connection, but nothing happened.
I also reset and wipe data from the phone but nothing changed. Now I think that it could be hardware problem. There is no reasinable way that I find. So need help

Click on my signature below and then go to the "Connection Issues..." link from there.

4-2ndtwin said:
Click on my signature below and then go to the "Connection Issues..." link from there.
Click to expand...
Click to collapse
No way didnt work... I only havent tried different OS. May be it will work with different OS. It is very strange that I connected my phone any of my PCs without a problem. But suddenly it stopped working with any of them.

4-2ndtwin said:
Click on my signature below and then go to the "Connection Issues..." link from there.
Click to expand...
Click to collapse
I can connect my phone with bluetooth. Is there a way to upgrade UCKK4 with CWM recovery. As I rememder I can do this with update.zip file. If yes, how can I find this file?

I downloaded fasty kk4 for captivate and upgrade my phone with CWM recovery.
It looks fine but It still doesnt recognize my PC. When I plug phone to pc menu is coming and I choose mass storage then nothing happens. As I know I am using right drivers because it were the drivers working fine before.
Is there any advise at that point? Is it a hardware problem? By the way I am using comodo internet security.
Link that I downloaded fasty KK4:
http://forum.xda-developers.com/showthread.php?t=1360854&page=12

After all I cant open my phone After last update with UCKK4 it was working fine. Then I decided to apply lagfix. I loaded update.zip in sd card then update it in CWM. After it was loaded. It starts to open recovery mode everytime.
Firstly At&t logo is apperaring for 2 times then recovery mode is coming. I cant connect my phone to PC in any way.
As a result, My phone is unusable. Is there a way to make it working?

What about using button combo to boot into recovery and reflash a Rom that u have on you sdcard.

When I use combo button it opens recovery modes but I dont know why, it is limited. I just can choose 4 options that;
-Wipe user data
-Wipe cache data
-reload(or smthg like this) package
-reboot
When I choose reload, it starts to apply lagfix. After it starts it automatically comes to recovery mode again. I loaded the kk4 update in external sd and open in recovery mode, but it didnt load this file. May be I need to reach to internal sd somewhat but I cant.

Em_Tech said:
When I use combo button it opens recovery modes but I dont know why, it is limited. I just can choose 4 options that;
-Wipe user data
-Wipe cache data
-reload(or smthg like this) package
-reboot
When I choose reload, it starts to apply lagfix. After it starts it automatically comes to recovery mode again. I loaded the kk4 update in external sd and open in recovery mode, but it didnt load this file. May be I need to reach to internal sd somewhat but I cant.
Click to expand...
Click to collapse
Yeah, I think u messed up when u loaded the "update.zip" previously. There's no need for that on Gingerbread. Just flashing a dev kernel that has cwm recovery baked in will do. But regardless, what's done is done. You have just got to get into download mode somehow and flash a dev kernel then flash a dev rom or Odin/Heimdall back to a Stock.
?? What about wipe data/ factory reset from the recovery and then see if it will boot up.
Other than that u have gotta get into download mode. Have u gotta jig ? If not, look in my sig link below for links on how to make one or where to buy one.

Thanks for your care. I just check the link about jig. But it seems hard to apply for me and I just open the phone in download mode. The problem is the phone dont recognize the PC. I am now trying to connect the phone to my PC on Linux. Should I setup special driver to recognize the phone by Linux?
If I cant succeed, I will try jtag or smthg else. Thanks for your help 4_2ndtwen.

Galaxy note won't update, and now won't even start. Help please!

Galaxy note what an update, and now won't even start. Help please!
My Samsung note was updated from gingerbread to ice cream sandwich using Samsung Kies. Then rooted and put on the Franco kernel. That's when the problems started: lag city! It couldn't even play fruit ninja or noogra nuts. Everything was slow. subsequent updates wouldn't work. Every few hours it would remind me, and I would click dismiss.
I've also been using an aftermarket battery. When the battery would get low, screen would activate all pixels and go very bright. At this point I would have to hold down the power button. Anyway, the last time I did this was the last time the phone was on. When I try to start the phone it gets to the Samsung bit after the opening flash intro, and the Samsung just glows and blinks. I've tried many times but it doesn't work. If left in the state, it gets very hot and will Drain the battery very quickly.
I am able to get to the clockwork mod recovery. What shall I do from here? I see there's an option to backup, but how would I restore from and what all my data be there? I have some really important data on the phone that I'm hoping to recover. In fact some of that data is worth several hundred dollars, because it's my proof for my friend who was defrauded by a ticketing agent.
Your help would be really appreciated everyone!

From what I can tell, you haven't wiped so it shouldn't be a emmc brick.
You said you could get to CWM recovery so from there you should first mount your phone to your pc and back up anything important like that "several hundred dollar" info.
Y'know. Just to be safe.
Then download a safe kernel such as Hydracore or Philz and put it on your phone.
Flash it, reboot recovery, then do all 3 wipes and see if that solves your problem.

little-vince said:
You said you could get to CWM recovery so from there you should first mount your phone to your pc and back up anything important
Click to expand...
Click to collapse
Any idea how I can get that done? When I plug it into the PC, it says that the device has malfunctioned and is not recognized. I am a rather bit of a newb.

2011universal said:
Any idea how I can get that done? When I plug it into the PC, it says that the device has malfunctioned and is not recognized. I am a rather bit of a newb.
Click to expand...
Click to collapse
Go to Mounts and Storage>mount USB storage
Plug cable in.

little-vince said:
Go to Mounts and Storage>mount USB storage
Plug cable in.
Click to expand...
Click to collapse
Thanks again for the reply. When I do that and plug it in, the computer installs the device driver software correctly. However, I can't find the device either in "my computer" or in the device management/hard disk management console. I've tried this on two computers with the same result. The option to eject is in the tray icon (similar to other removable storage), but that's the only place it seems to be visible.

Flash a Philz kernel from franco recovery. Reboob recovery to get into Philz. Then mounts and storage /mount USB. PC will pick up both int & ext sd cards:thumbup:
Sent from my GT-N7000 using xda app-developers app

shoey63 said:
Reboob recovery to get into Philz.
Click to expand...
Click to collapse
He he. u use this a lot..
here is the philz thread
http://forum.xda-developers.com/showthread.php?t=1901191
just check ur rom build in settings and download the kernel .zip file and install it from recovery.

nokiamodeln91 said:
He he. u use this a lot..
here is the
Click to expand...
Click to collapse
Yeah I know. There's faster kernels but no better recovery mode
Sent from my GT-N7000 using xda app-developers app

nokiamodeln91 said:
He he. u use this a lot..
here is the philz thread
http://forum.xda-developers.com/showthread.php?t=1901191
just check ur rom build in settings and download the kernel .zip file and install it from recovery.
Click to expand...
Click to collapse
Thank you for the responses again. I'm afraid I'm so much a noob I don't know what to do even after visiting that thread. I'm not sure which one to download.
I can check my ROM build in settings because I can't start the phone..
Previously had noted the following about my phone:
PDA:
N7000XXKKA
Phone:
N7000XXKK5
CSC:
N7000XEUKK3
Thanks as always to you generous people willing to help out and save this NOOB.

PhilzDDLR9-INU.zip works on all ICS that I know of. They are interchangable amd backwards compatible.
Sent from my GT-N7000 using xda app-developers app

this is GB and philz wont work..
seems u had the swiss firmware and u got updated to ICS.. so i am guessing now u have N7000XXLRI
download philz XXLRI..
i guess u dont have access to internal storage.. if u have a SD card .. put the kernel in it and then flash using cwm > install zip from SD
if no sd then put the phone in download mode and install using PC odin using PDA tab
---------- Post added at 06:30 PM ---------- Previous post was at 06:30 PM ----------
report back asa possible

2011universal said:
Thank you for the responses again. I'm afraid I'm so much a noob I don't know what to do even after visiting that thread. I'm not sure which one to download.
I can check my ROM build in settings because I can't start the phone..
Previously had noted the following about my phone:
PDA:
N7000XXKKA
Phone:
N7000XXKK5
CSC:
N7000XEUKK3
Thanks as always to you generous people willing to help out and save this NOOB.
Click to expand...
Click to collapse
Try hydracore 5.4 then. http://hecubus.com/xda/kernel/HydraCore/GL_HYDRACORE_v5-4_STD.zip
If you are unable to connect your phone to PC,
remove your sd card,
put it in a card reader or another phone that is alive
put the above downloaded kernel.zip on the sd card.
Now reinsert the sd card in your dead phone and
flash the kernel from the recovery.
in advanced menu, reboot recovery
Now wipe /data and reboot, you should be good to go.

he doesnot want to wipe data i guess..

nokiamodeln91 said:
he doesnot want to wipe data i guess..
Click to expand...
Click to collapse
Well, he can try rebooting w/o wiping data.
@OP: By the way what is the "critical" proof that you are talking about? Are they some photographs etc? In that case they are untouched during the wipe operation.

So this will allow me to boot the phone without wiping the data?

2011universal said:
So this will allow me to boot the phone without wiping the data?
Click to expand...
Click to collapse
dont know what u referring to.. install the philz kernel and boot into recovery and mount usb storage... backup what ever u need...
and ya as the previous post said... if ur crucial data is on a storage and not a data of app then it will be ok

anilisanil said:
Well, he can try rebooting w/o wiping data.
@OP: By the way what is the "critical" proof that you are talking about? Are they some photographs etc? In that case they are untouched during the wipe operation.
Click to expand...
Click to collapse
nokiamodeln91 said:
dont know what u referring to.. install the philz kernel and boot into recovery and mount usb storage... backup what ever u need...
and ya as the previous post said... if ur crucial data is on a storage and not a data of app then it will be ok
Click to expand...
Click to collapse
Thanks guys again. Trouble getting the forum to load here in China right now.
>the files are sound files in sound recorder app
>Ideally I'd be able to recover everything, but I'll take what I can get!

anilisanil said:
Try hydracore 5.4 then. http://hecubus.com/xda/kernel/HydraCore/GL_HYDRACORE_v5-4_STD.zip
If you are unable to connect your phone to PC,
remove your sd card,
put it in a card reader or another phone that is alive
put the above downloaded kernel.zip on the sd card.
Now reinsert the sd card in your dead phone and
flash the kernel from the recovery.
in advanced menu, reboot recovery
Now wipe /data and reboot, you should be good to go.
Click to expand...
Click to collapse
So I finally got this done and it is still not working. I am able to access the SD card, but not the internal storage. Another drive appears in My Computer, but it is greyed out. Any ideas?

2011universal said:
So I finally got this done and it is still not working. I am able to access the SD card, but not the internal storage. Another drive appears in My Computer, but it is greyed out. Any ideas?
Click to expand...
Click to collapse
Sounds like you've got corrupted rw permissions on internal storage. It's quite common, but the only way I know how to recover is a reflash with correct wipes.
Sent from my GT-N7000 using xda premium

Well I finally got it repaired. Expanded said it would take two months after I mailed it back to the UK. Got it done locally egger where two places said it was the power chip. The good news is the pics are there there, but the data is gone. Do you all recon there is someway else to get the data. If the pics are there maybe the data still can be recovered?
Also, do you think it is dangerous to use whatever the local place flashed on to it? There are a few Chinese apps on it. System says it Systemis hardcore 5 and android 4.0.3
Thank you guys.

My LG Optimus 2x only enter on recovery mode

Hi!
My LG Optimus 2x can only enter on recovery mode! The problem started when I tried to instal Eagle's Blood rom, and when you turn on, appears the Eagle's Blood logo, follow by the LG logo, alternately... And the smartphone don't start...
I entered on the recovery mode and formated everything (wipped everything too)... So, I don't have the old rom (cyanogen 9) in my sd card anymore... And, I can't connect my LG on my pc for transfer it... (I don't know why it's not having connection with them both)
I tried to use the android sdk windows, adb stuff... And it doesn't worked... I don't know why!
Someone can help me??? Thx!

just flash another rom,put ur sd card to your pc then copy a rom,then fresh install it.. done.. or redownload your eaglesblood rom,may be it's corrupt during download time..

vEget7 said:
just flash another rom,put ur sd card to your pc then copy a rom,then fresh install it.. done.. or redownload your eaglesblood rom,may be it's corrupt during download time..
Click to expand...
Click to collapse
Yeah, but, I don't have the entrance in my computer for the sd card...
Anyway, you gave me the correct solution! Thx brow!

BrunoTrevizo said:
Yeah, but, I don't have the entrance in my computer for the sd card...
Anyway, you gave me the correct solution! Thx brow!
Click to expand...
Click to collapse
If you can't put files externally in your sd card,you can flash an NVFlash ROM like topogigi's rom, or if you want to keep the old bootloader to be able to install a large number of custom roms (the ones not based on stock ics) then flash homero's gb NVFlash ROM.
It doesn't require anything to be present on the phone, just follow instructions

BrunoTrevizo said:
Hi!
My LG Optimus 2x can only enter on recovery mode! The problem started when I tried to instal Eagle's Blood rom, and when you turn on, appears the Eagle's Blood logo, follow by the LG logo, alternately... And the smartphone don't start...
I entered on the recovery mode and formated everything (wipped everything too)... So, I don't have the old rom (cyanogen 9) in my sd card anymore... And, I can't connect my LG on my pc for transfer it... (I don't know why it's not having connection with them both)
I tried to use the android sdk windows, adb stuff... And it doesn't worked... I don't know why!
Someone can help me??? Thx!
Click to expand...
Click to collapse
In CWM there is an option to activate usb mass storage in the mounts and storage menu so you can transfer files even in recovery mode

massimo69 said:
In CWM there is an option to activate usb mass storage in the mounts and storage menu so you can transfer files even in recovery mode
Click to expand...
Click to collapse
Works in CWM5 but not CWM6

rugglez said:
Works in CWM5 but not CWM6
Click to expand...
Click to collapse
it works for me on CWM6

BrunoTrevizo said:
Hi!
My LG Optimus 2x can only enter on recovery mode! The problem started when I tried to instal Eagle's Blood rom, and when you turn on, appears the Eagle's Blood logo, follow by the LG logo, alternately... And the smartphone don't start...
I entered on the recovery mode and formated everything (wipped everything too)... So, I don't have the old rom (cyanogen 9) in my sd card anymore... And, I can't connect my LG on my pc for transfer it... (I don't know why it's not having connection with them both)
I tried to use the android sdk windows, adb stuff... And it doesn't worked... I don't know why!
Someone can help me??? Thx!
Click to expand...
Click to collapse
If you don't have success, try using nvflash to recover to 2.1 or 2.2.
It's pretty quickly.
Note: It'll full wipe your phone.

Thanks everyone!!! Solved! Put sd card in a pen drive!!

[Q] SGS+ brick

My phone (I9001, S +) does not work, so it's basically a brick. I have on my phone CWM Touch Recovery to recover system, no operating system and a big problem. Passing over the fact that I can't put a flashable zip on the phone since the PC does not see the phone I have a problem with the recovery software . All phone folders can not be seen or mounted, except for the external memory card . I think if I will put a new flashable recovery soft on this and flash it , the new one can work properly and after i can install every OS ( I didn't mention that i've tried to install RevengeV1.zip and it doesn't work ) . Is that a good way or should I do something different?
PS: I did not do this because currently I have not a microSD card reader till tomorrow, so I thought to ask you guys because you have the experience and maybe the studies
And if it helps with something ( with some fun ) my mom will kill me for this ( "You lil' technology master" ) [just kiddin']

ac.andreicrisan said:
My phone (I9001, S +) does not work, so it's basically a brick. I have on my phone CWM Touch Recovery to recover system, no operating system and a big problem. Passing over the fact that I can't put a flashable zip on the phone since the PC does not see the phone I have a problem with the recovery software . All phone folders can not be seen or mounted, except for the external memory card . I think if I will put a new flashable recovery soft on this and flash it , the new one can work properly and after i can install every OS ( I didn't mention that i've tried to install RevengeV1.zip and it doesn't work ) . Is that a good way or should I do something different?
PS: I did not do this because currently I have not a microSD card reader till tomorrow, so I thought to ask you guys because you have the experience and maybe the studies
And if it helps with something ( with some fun ) my mom will kill me for this ( "You lil' technology master" ) [just kiddin']
Click to expand...
Click to collapse
Up , anyone have an opinion or something ?

what cwm recovery exactly did you use?
maybe try to flash cwm5.5.0.4. try to mount usb-storage. then you should be able to copy files from pc.
and you can try it with ext.sd wit recovery with file manager
another posssibility would be over adb
further try to flash broodrom via odin
you can also try to install stockrom
sorry if i said things you already mentione.
another question: is your phone bricked due brick bug?

Lei M said:
what cwm recovery exactly did you use?
maybe try to flash cwm5.5.0.4. try to mount usb-storage. then you should be able to copy files from pc.
and you can try it with ext.sd wit recovery with file manager
another posssibility would be over adb
further try to flash broodrom via odin
you can also try to install stockrom
sorry if i said things you already mentione.
another question: is your phone bricked due brick bug?
Click to expand...
Click to collapse
I use ClockworkMod Recovery v6.0.2.7
Actually i'm not sure what do you mean with bricked due brick bug .. :-? My problem is with the recovery that it doesn't recognize files/folders from my phone (exemple: E:Can't open /cache/recovery/log , so i can't make something with it , it is with sdcard , system , all except external SD )
I was thinking at two methods : 1. flash from external sd card a new recovery software , maybe it will work properly and see my phone and after install any OS or 2. Install directly a new OS , recommended from you
And i have to say again , my phone doesn't have any OS because i remove the last one (with backup , but can't see it because it's on sdcard ) and the new one can't be installed , on sdcard too
I will try your suggestions now and post/edit

Yes the best way is to flash via Odin.....
Sent from my HTC One X using xda app-developers app

nishu_nisarg said:
Yes the best way is to flash via Odin.....
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
A lil' problem . When i mount the usb with my phone turned on (because off it doesn't work) my phone reboot after ~ 2 minutes , what should i do?
Can be the battery on low level , and the phone not charging?

ac.andreicrisan said:
A lil' problem . When i mount the usb with my phone turned on (because off it doesn't work) my phone reboot after ~ 2 minutes , what should i do?
Can be the battery on low level , and the phone not charging?
Click to expand...
Click to collapse
UP: So , my phone is still bricked . Now it has his stock recovery soft but not see the external SD-Card and when open give's me status=0 , whatever , i can navigate on my phone folders , reboot .. So .. when it's in recovery i plug it in usb , odin see it , press start with a stock rom ( Anyway , you can give me a link of a stock rom for Romania , maybe i choosed a wrong-one ) and Odin failed . Any suggestion now?

first make sure you have enough battrey.
and then go in to download mode.
then connect to pc via usb cable
and flash the following files by using odin its a worldwide release
http://forum.xda-developers.com/showthread.php?t=1432572

[Q] Samsung Galaxy S advance GT-I9070

Hi,
I tried to install cyanogenmod 12.1 after installing it stopped at TWRP recovery project screen v2.8.6.0. i want to remove this and install the previous version..i'm not able to do factory reset/wipe data cache/dalvik cache when i tried to do it says failed.
Unfortunately i have formatted everything on sd card and external sd card. now it says there is no os installed and no super user.
first of all i want to get out of these and install the old version CM11.0.
Please help me its very irritating can't go back to android.
Thanks,
Giri.

Giri512 said:
Hi,
I tried to install cyanogenmod 12.1 after installing it stopped at TWRP recovery project screen v2.8.6.0. i want to remove this and install the previous version..i'm not able to do factory reset/wipe data cache/dalvik cache when i tried to do it says failed.
Unfortunately i have formatted everything on sd card and external sd card. now it says there is no os installed and no super user.
first of all i want to get out of these and install the old version CM11.0.
Please help me its very irritating can't go back to android.
Thanks,
Giri.
Click to expand...
Click to collapse
Okay. Two possible solutions (i think the last is solve your problem).
1. First download cm11 rom and gapps.
Copy the files over your sd card.
Try install via recovery.
If you lucky, that's worked, but i think the rom is not work properly.
2. The good way is odin and then cm11 with clean install.
Sorry for my bad english

reply
kilroy69 said:
Okay. Two possible solutions (i think the last is solve your problem).
1. First download cm11 rom and gapps.
Copy the files over your sd card.
Try install via recovery.
If you lucky, that's worked, but i think the rom is not work properly.
2. The good way is odin and then cm11 with clean install.
Sorry for my bad english
Click to expand...
Click to collapse
I lost everything..i tried other options while doing that when i boot the device it shows only samsung logo after that it wont do anything..when i connect to usb cable also its not showing..
Now i want to do samsung recovery..How to do that.

Giri512 said:
I lost everything..i tried other options while doing that when i boot the device it shows only samsung logo after that it wont do anything..when i connect to usb cable also its not showing..
Now i want to do samsung recovery..How to do that.
Click to expand...
Click to collapse
If no download mode, then i think that: Usb Jig
singhdharmendra48 said:
bcoz i have a jig and work only download mode not reset binary count
Click to expand...
Click to collapse
or:
need-a-samsung-usb-jig-build-your-own
or:
Samsung i9070 (Galaxy S Advance) - JTAG/RIFF connection unbrick (repair dead boot)
I don't know which the different. Jig or Jtag? Sorry, i was not even need it.

Thanks
kilroy69 said:
If no download mode, then i think that: Usb Jig
or:
need-a-samsung-usb-jig-build-your-own
or:
Samsung i9070 (Galaxy S Advance) - JTAG/RIFF connection unbrick (repair dead boot)
I don't know which the different. Jig or Jtag? Sorry, i was not even need it.
Click to expand...
Click to collapse
Thanks..better to go to service centre..