Database Develop

accidentally formated internal sd

hey folks, running miui. msg came up to format sd card. didn't know it wasn't my external but my internal partition. some of my apps aren't working. so i'm going to re install miui after a factory reset. would this wipe have affected anything with android it self? would I need to run odin, flash stock then miui?

xtracrispy69 said:
hey folks, running miui. msg came up to format sd card. didn't know it wasn't my external but my internal partition. some of my apps aren't working. so i'm going to re install miui after a factory reset. would this wipe have affected anything with android it self? would I need to run odin, flash stock then miui?
Click to expand...
Click to collapse
No it shouldn't affect anything other than whatever data/files you had on the internal sd card (music, videos, etc.) If you factory reset and reinstall MIUI you should be fine.

Hope u kept a copy of ur TiBu folder on ur PC and also hope next time u'll post in the correct thread

yes but now I think i bricked. ran odin, its now stuck in an att boot loop. cannot get into download mode as all button combos flash the battery charge screen have no clue what to do

xtracrispy69 said:
yes but now I think i bricked. ran odin, its now stuck in an att boot loop. cannot get into download mode as all button combos flash the battery charge screen have no clue what to do
Click to expand...
Click to collapse
Make or buy a jig

anyone know a place in the toronto area that has them?
so the jig will get me in download mode.
would i then run odin, download rogers stock 2.1 rom and flash that?

Well have you tried getting into the download mode ,through the usb insert?
And if you want the JIG contact adam outler here on XDA he will help you out and at a cheaper price....

[Q] USB Debugging CM10 and V30I

Hey guys, since i flashed CM10 and/or V30I KU5900 i have some problems with USB Debugging, i cannot use QtADB, or flash the CWM for example .
All drivers are installed but it just doesn't show up D:
Any suggestions?
Thanks for your Help .

In cm10 change your mode from MTP to camera. So just pull down the topbar, find the USB option there, while plugged to USB, open it, change it to Camera, unplug USB, plug in again and that's it.
For KU5900 repack, I cant tell you, but it should work similar. Dont forget to enable usb debugging in settings

N00BY0815 said:
In cm10 change your mode from MTP to camera. So just pull down the topbar, find the USB option there, while plugged to USB, open it, change it to Camera, unplug USB, plug in again and that's it.
For KU5900 repack, I cant tell you, but it should work similar. Dont forget to enable usb debugging in settings
Click to expand...
Click to collapse
Well, it looks like it's working as USB Transfer on CM10 with CWM Flash but QtADB doesn't seen to work
I can't download the newest version of QtADB, i don't know why, it just doesn't connect, so i'm using the 0.7.3 version .
If you can mirror it i'd be glad

Nikitozin said:
Well, it looks like it's working as USB Transfer on CM10 with CWM Flash but QtADB doesn't seen to work
I can't download the newest version of QtADB, i don't know why, it just doesn't connect, so i'm using the 0.7.3 version .
If you can mirror it i'd be glad
Click to expand...
Click to collapse
Sorry, I am on Linux now, when working with Android... So I only use the "real adb"

N00BY0815 said:
Sorry, I am on Linux now, when working with Android... So I only use the "real adb"
Click to expand...
Click to collapse
Okay XD
Thanks for the help once more : )

Added a mirror for you above

hey this is my first post so correct me if i do many mistake
i have rooted my phone LGp970 very first time...
now i have flashed the korean LG-KU5900 ICS V30I...
and now i can't use my menu,home,back,and search keys...
i can only use them if i put my cell to charge...
any solution for that..
or i m the only one having this problem???
i have read all the topics related to rooting,flashing,unbricking,etc before rooting my phone....
still i can be wrong.....but su is there after rooting...
btw i flashed using "ROM Manager" (i guess only method available for noobs like me)
i had wiped dalvik data(or cache idk) and wiped data also...and done nandroid backup saperately......
one mere thing while backing up some file named sd xlm(or idk) skipped....should i bother about it
.
.
.
.
.
.help me every possible way.....please
cause i can't access my sd as sd in korean ICS V30I because it shows it as internal storage....and i have only one phone so quick reply would be appriciated.....
an sorry for bad english....

rony3964 said:
i have rooted my phone LGp970 very first time...
now i have flashed the korean LG-KU5900 ICS V30I...
and now i can't use my menu,home,back,and search keys...
i can only use them if i put my cell to charge...
any solution for that..
or i m the only one having this problem???
i have read all the topics related to rooting,flashing,unbricking,etc before rooting my phone....
still i can be wrong.....but su is there after rooting...
btw i flashed using "ROM Manager" (i guess only method available for noobs like me)
i had wiped dalvik data(or cache idk) and wiped data also...and done nandroid backup saperately......
one mere thing while backing up some file named sd xlm(or idk) skipped....should i bother about it
.
.
.
.
.
.help me every possible way.....please
cause i can't access my sd as sd in korean ICS V30I because it shows it as internal storage....and i have only one phone so quick reply would be appriciated.....
an sorry for bad english....
Click to expand...
Click to collapse
first of all, try rebooting into recovery(cwm)
if you can't, download an app called quickboot or titanium backup
from your pc, download the sd card fix from the thread
with that, reboot into recovery
wipe data, cache, dalvik
then re-install the rom
afterwards install the sdcard fix

theaks30 said:
first of all, try rebooting into recovery(cwm)
if you can't, download an app called quickboot or titanium backup
from your pc, download the sd card fix from the thread
with that, reboot into recovery
wipe data, cache, dalvik
then re-install the rom
afterwards install the sdcard fix
Click to expand...
Click to collapse
it will fix my menu key,home key problem also right???

[Q] LG-P999 stuck at LG logo

Hi,
I tried upgrading my LG-P999 from Android 2.2.2 to Jelly Bean by installing cm-9.9.9-JB-p999-2.zip on the internal storage and then running that file from there, the phone rebooted and is stuck on LG logo screen now.
Can someone please advise how to fix this problem?
Thank you.

LG-P999
rabbagon said:
Hi,
I tried upgrading my LG-P999 from Android 2.2.2 to Jelly Bean by installing cm-9.9.9-JB-p999-2.zip on the internal storage and then running that file from there, the phone rebooted and is stuck on LG logo screen now.
Can someone please advise how to fix this problem?
Thank you.
Click to expand...
Click to collapse
Can someone please guide me how I can flash ROM from computer as the phone doesn't respond to any key except when I restart it by holding the volume down and power buttons, it reboots and gets stuck at LG screen again. When I plug in the USB cable, the computer detects a device but doesn't show anything under My Computer. Please help !!!

Search for this:
[NOV16][STOCK ICS][NEW BL][NEW LAYOUT][CLEAN][CWM 6][ROOT][FACELOCK][UNBRICK] in P990 Android Development,in this post find:
Installation NVFlash version (under Windows): follow that instructions for your p999 custom Rom,but you must have NVFlash version of the Rom,if you dont have it,you must find it just to unbrick your phone,follow the instructions for the NVFlash version,Install this Rom,then install ROM Manager and Flash Clockwork Recovery,the easiest way of installing custom roms to use it,just put custom rom on your SD card,turn off your phone and turn on your phone on the way of holding the VOL + and Power button together,then follow instructions for your custom Rom(Wipe Data/Factory Reset,Wipe Dalvik Cache,Wipe Cache Partition ...) next step go to the "install zip from SD card",find your rom and flash it...

Thank you very much for your response.
Does every phone has it's own specific NVFlash and ROM? I have downloaded one from modacoDOTcom/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/ .... 2x-nvflashdrivers.zip and 2x-v10b-1300166062-nvflash.zip .... do you think it will work with p999 as well ?
Turky Party said:
Search for this:
[NOV16][STOCK ICS][NEW BL][NEW LAYOUT][CLEAN][CWM 6][ROOT][FACELOCK][UNBRICK] in P990 Android Development,in this post find:
Installation NVFlash version (under Windows): follow that instructions for your p999 custom Rom,but you must have NVFlash version of the Rom,if you dont have it,you must find it just to unbrick your phone,follow the instructions for the NVFlash version,Install this Rom,then install ROM Manager and Flash Clockwork Recovery,the easiest way of installing custom roms to use it,just put custom rom on your SD card,turn off your phone and turn on your phone on the way of holding the VOL + and Power button together,then follow instructions for your custom Rom(Wipe Data/Factory Reset,Wipe Dalvik Cache,Wipe Cache Partition ...) next step go to the "install zip from SD card",find your rom and flash it...
Click to expand...
Click to collapse

You do realize this is the P990 forum, right? The suggested solution posted above is for P990 devices. You need to check the G2X (P999) forums instead.

DrummerMuppet said:
You do realize this is the P990 forum, right? The suggested solution posted above is for P990 devices. You need to check the G2X (P999) forums instead.
Click to expand...
Click to collapse
Guys, thank you very much for your help. I flashed my phone and it is working now in a sense that its no longer freezing at LG logo. I can see the menu, wifi is working great however its not connecting to wireless network. I believe its due to the fact as DummerMuppet mentioned that I flashed it with 990 and have to look for 999.
I truly appreciate your help and support at least my phone is alive now.

rabbagon said:
Guys, thank you very much for your help. I flashed my phone and it is working now in a sense that its no longer freezing at LG logo. I can see the menu, wifi is working great however its not connecting to wireless network. I believe its due to the fact as DummerMuppet mentioned that I flashed it with 990 and have to look for 999.
I truly appreciate your help and support at least my phone is alive now.
Click to expand...
Click to collapse
That's correct. Even when they're practically identical in most stuff, the P990 and P999 are not the same device (eg. partitions are slightly different, if I remember correctly). P990 ROMs won't work on P999, and viceversa.

[Q] SGS+ brick

My phone (I9001, S +) does not work, so it's basically a brick. I have on my phone CWM Touch Recovery to recover system, no operating system and a big problem. Passing over the fact that I can't put a flashable zip on the phone since the PC does not see the phone I have a problem with the recovery software . All phone folders can not be seen or mounted, except for the external memory card . I think if I will put a new flashable recovery soft on this and flash it , the new one can work properly and after i can install every OS ( I didn't mention that i've tried to install RevengeV1.zip and it doesn't work ) . Is that a good way or should I do something different?
PS: I did not do this because currently I have not a microSD card reader till tomorrow, so I thought to ask you guys because you have the experience and maybe the studies
And if it helps with something ( with some fun ) my mom will kill me for this ( "You lil' technology master" ) [just kiddin']

ac.andreicrisan said:
My phone (I9001, S +) does not work, so it's basically a brick. I have on my phone CWM Touch Recovery to recover system, no operating system and a big problem. Passing over the fact that I can't put a flashable zip on the phone since the PC does not see the phone I have a problem with the recovery software . All phone folders can not be seen or mounted, except for the external memory card . I think if I will put a new flashable recovery soft on this and flash it , the new one can work properly and after i can install every OS ( I didn't mention that i've tried to install RevengeV1.zip and it doesn't work ) . Is that a good way or should I do something different?
PS: I did not do this because currently I have not a microSD card reader till tomorrow, so I thought to ask you guys because you have the experience and maybe the studies
And if it helps with something ( with some fun ) my mom will kill me for this ( "You lil' technology master" ) [just kiddin']
Click to expand...
Click to collapse
Up , anyone have an opinion or something ?

what cwm recovery exactly did you use?
maybe try to flash cwm5.5.0.4. try to mount usb-storage. then you should be able to copy files from pc.
and you can try it with ext.sd wit recovery with file manager
another posssibility would be over adb
further try to flash broodrom via odin
you can also try to install stockrom
sorry if i said things you already mentione.
another question: is your phone bricked due brick bug?

Lei M said:
what cwm recovery exactly did you use?
maybe try to flash cwm5.5.0.4. try to mount usb-storage. then you should be able to copy files from pc.
and you can try it with ext.sd wit recovery with file manager
another posssibility would be over adb
further try to flash broodrom via odin
you can also try to install stockrom
sorry if i said things you already mentione.
another question: is your phone bricked due brick bug?
Click to expand...
Click to collapse
I use ClockworkMod Recovery v6.0.2.7
Actually i'm not sure what do you mean with bricked due brick bug .. :-? My problem is with the recovery that it doesn't recognize files/folders from my phone (exemple: E:Can't open /cache/recovery/log , so i can't make something with it , it is with sdcard , system , all except external SD )
I was thinking at two methods : 1. flash from external sd card a new recovery software , maybe it will work properly and see my phone and after install any OS or 2. Install directly a new OS , recommended from you
And i have to say again , my phone doesn't have any OS because i remove the last one (with backup , but can't see it because it's on sdcard ) and the new one can't be installed , on sdcard too
I will try your suggestions now and post/edit

Yes the best way is to flash via Odin.....
Sent from my HTC One X using xda app-developers app

nishu_nisarg said:
Yes the best way is to flash via Odin.....
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
A lil' problem . When i mount the usb with my phone turned on (because off it doesn't work) my phone reboot after ~ 2 minutes , what should i do?
Can be the battery on low level , and the phone not charging?

ac.andreicrisan said:
A lil' problem . When i mount the usb with my phone turned on (because off it doesn't work) my phone reboot after ~ 2 minutes , what should i do?
Can be the battery on low level , and the phone not charging?
Click to expand...
Click to collapse
UP: So , my phone is still bricked . Now it has his stock recovery soft but not see the external SD-Card and when open give's me status=0 , whatever , i can navigate on my phone folders , reboot .. So .. when it's in recovery i plug it in usb , odin see it , press start with a stock rom ( Anyway , you can give me a link of a stock rom for Romania , maybe i choosed a wrong-one ) and Odin failed . Any suggestion now?

first make sure you have enough battrey.
and then go in to download mode.
then connect to pc via usb cable
and flash the following files by using odin its a worldwide release
http://forum.xda-developers.com/showthread.php?t=1432572

[Q] Samsung Galaxy S advance GT-I9070

Hi,
I tried to install cyanogenmod 12.1 after installing it stopped at TWRP recovery project screen v2.8.6.0. i want to remove this and install the previous version..i'm not able to do factory reset/wipe data cache/dalvik cache when i tried to do it says failed.
Unfortunately i have formatted everything on sd card and external sd card. now it says there is no os installed and no super user.
first of all i want to get out of these and install the old version CM11.0.
Please help me its very irritating can't go back to android.
Thanks,
Giri.

Giri512 said:
Hi,
I tried to install cyanogenmod 12.1 after installing it stopped at TWRP recovery project screen v2.8.6.0. i want to remove this and install the previous version..i'm not able to do factory reset/wipe data cache/dalvik cache when i tried to do it says failed.
Unfortunately i have formatted everything on sd card and external sd card. now it says there is no os installed and no super user.
first of all i want to get out of these and install the old version CM11.0.
Please help me its very irritating can't go back to android.
Thanks,
Giri.
Click to expand...
Click to collapse
Okay. Two possible solutions (i think the last is solve your problem).
1. First download cm11 rom and gapps.
Copy the files over your sd card.
Try install via recovery.
If you lucky, that's worked, but i think the rom is not work properly.
2. The good way is odin and then cm11 with clean install.
Sorry for my bad english

reply
kilroy69 said:
Okay. Two possible solutions (i think the last is solve your problem).
1. First download cm11 rom and gapps.
Copy the files over your sd card.
Try install via recovery.
If you lucky, that's worked, but i think the rom is not work properly.
2. The good way is odin and then cm11 with clean install.
Sorry for my bad english
Click to expand...
Click to collapse
I lost everything..i tried other options while doing that when i boot the device it shows only samsung logo after that it wont do anything..when i connect to usb cable also its not showing..
Now i want to do samsung recovery..How to do that.

Giri512 said:
I lost everything..i tried other options while doing that when i boot the device it shows only samsung logo after that it wont do anything..when i connect to usb cable also its not showing..
Now i want to do samsung recovery..How to do that.
Click to expand...
Click to collapse
If no download mode, then i think that: Usb Jig
singhdharmendra48 said:
bcoz i have a jig and work only download mode not reset binary count
Click to expand...
Click to collapse
or:
need-a-samsung-usb-jig-build-your-own
or:
Samsung i9070 (Galaxy S Advance) - JTAG/RIFF connection unbrick (repair dead boot)
I don't know which the different. Jig or Jtag? Sorry, i was not even need it.

Thanks
kilroy69 said:
If no download mode, then i think that: Usb Jig
or:
need-a-samsung-usb-jig-build-your-own
or:
Samsung i9070 (Galaxy S Advance) - JTAG/RIFF connection unbrick (repair dead boot)
I don't know which the different. Jig or Jtag? Sorry, i was not even need it.
Click to expand...
Click to collapse
Thanks..better to go to service centre..