Hi,
I tried to install cyanogenmod 12.1 after installing it stopped at TWRP recovery project screen v2.8.6.0. i want to remove this and install the previous version..i'm not able to do factory reset/wipe data cache/dalvik cache when i tried to do it says failed.
Unfortunately i have formatted everything on sd card and external sd card. now it says there is no os installed and no super user.
first of all i want to get out of these and install the old version CM11.0.
Please help me its very irritating can't go back to android.
Thanks,
Giri.
Giri512 said:
Hi,
I tried to install cyanogenmod 12.1 after installing it stopped at TWRP recovery project screen v2.8.6.0. i want to remove this and install the previous version..i'm not able to do factory reset/wipe data cache/dalvik cache when i tried to do it says failed.
Unfortunately i have formatted everything on sd card and external sd card. now it says there is no os installed and no super user.
first of all i want to get out of these and install the old version CM11.0.
Please help me its very irritating can't go back to android.
Thanks,
Giri.
Click to expand...
Click to collapse
Okay. Two possible solutions (i think the last is solve your problem).
1. First download cm11 rom and gapps.
Copy the files over your sd card.
Try install via recovery.
If you lucky, that's worked, but i think the rom is not work properly.
2. The good way is odin and then cm11 with clean install.
Sorry for my bad english
reply
kilroy69 said:
Okay. Two possible solutions (i think the last is solve your problem).
1. First download cm11 rom and gapps.
Copy the files over your sd card.
Try install via recovery.
If you lucky, that's worked, but i think the rom is not work properly.
2. The good way is odin and then cm11 with clean install.
Sorry for my bad english
Click to expand...
Click to collapse
I lost everything..i tried other options while doing that when i boot the device it shows only samsung logo after that it wont do anything..when i connect to usb cable also its not showing..
Now i want to do samsung recovery..How to do that.
Giri512 said:
I lost everything..i tried other options while doing that when i boot the device it shows only samsung logo after that it wont do anything..when i connect to usb cable also its not showing..
Now i want to do samsung recovery..How to do that.
Click to expand...
Click to collapse
If no download mode, then i think that: Usb Jig
singhdharmendra48 said:
bcoz i have a jig and work only download mode not reset binary count
Click to expand...
Click to collapse
or:
need-a-samsung-usb-jig-build-your-own
or:
Samsung i9070 (Galaxy S Advance) - JTAG/RIFF connection unbrick (repair dead boot)
I don't know which the different. Jig or Jtag? Sorry, i was not even need it.
Thanks
kilroy69 said:
If no download mode, then i think that: Usb Jig
or:
need-a-samsung-usb-jig-build-your-own
or:
Samsung i9070 (Galaxy S Advance) - JTAG/RIFF connection unbrick (repair dead boot)
I don't know which the different. Jig or Jtag? Sorry, i was not even need it.
Click to expand...
Click to collapse
Thanks..better to go to service centre..
Related
hey folks, running miui. msg came up to format sd card. didn't know it wasn't my external but my internal partition. some of my apps aren't working. so i'm going to re install miui after a factory reset. would this wipe have affected anything with android it self? would I need to run odin, flash stock then miui?
xtracrispy69 said:
hey folks, running miui. msg came up to format sd card. didn't know it wasn't my external but my internal partition. some of my apps aren't working. so i'm going to re install miui after a factory reset. would this wipe have affected anything with android it self? would I need to run odin, flash stock then miui?
Click to expand...
Click to collapse
No it shouldn't affect anything other than whatever data/files you had on the internal sd card (music, videos, etc.) If you factory reset and reinstall MIUI you should be fine.
Hope u kept a copy of ur TiBu folder on ur PC and also hope next time u'll post in the correct thread
yes but now I think i bricked. ran odin, its now stuck in an att boot loop. cannot get into download mode as all button combos flash the battery charge screen have no clue what to do
xtracrispy69 said:
yes but now I think i bricked. ran odin, its now stuck in an att boot loop. cannot get into download mode as all button combos flash the battery charge screen have no clue what to do
Click to expand...
Click to collapse
Make or buy a jig
anyone know a place in the toronto area that has them?
so the jig will get me in download mode.
would i then run odin, download rogers stock 2.1 rom and flash that?
Well have you tried getting into the download mode ,through the usb insert?
And if you want the JIG contact adam outler here on XDA he will help you out and at a cheaper price....
hi everybody
i have samsung galaxy s.
yesterday i tried to install new rom. i have entered to recovery mode and did:
1) Wipe Data/factory reset
2)Wipe Cache
3)Wipe Dalvik-cache
4)mouts and storage and then format/system
5)Install Zip from SD card
when i did , the device could not recgonize the sd card and write me an erorr message.
people in other forums told me to install stock rom.
i did it.
i have download odin and tried to burn the stock rom. everything was ok.
the burn completed.
when i plugged out the phone from the usb port, the phone turned on and shows me at&t logo Flickering.
i cant enter recovery mode or download mode. only the logo Flickering.
someone please can help me?
i am helpless?
thank u all
crmadrid said:
hi everybody
i have samsung galaxy s.
yesterday i tried to install new rom. i have entered to recovery mode and did:
1) Wipe Data/factory reset
2)Wipe Cache
3)Wipe Dalvik-cache
4)mouts and storage and then format/system
5)Install Zip from SD card
when i did , the device could not recgonize the sd card and write me an erorr message.
people in other forums told me to install stock rom.
i did it.
i have download odin and tried to burn the stock rom. everything was ok.
the burn completed.
when i plugged out the phone from the usb port, the phone turned on and shows me at&t logo Flickering.
i cant enter recovery mode or download mode. only the logo Flickering.
someone please can help me?
i am helpless?
thank u all
Click to expand...
Click to collapse
i think ur phone is bricked...
so i recommend u use USB jig to get back into download mode...U can check the video below
http://www.youtube.com/watch?v=1RoZU...e_gdata_player
hope it works...
tell me ur status after this..
If my post helped, don't mind hitting THANKS
and if the JIG wont help send me a message and I will tell you how to get into download mode
hassanalip21 said:
and if the JIG wont help send me a message and I will tell you how to get into download mode
Click to expand...
Click to collapse
Is there any other way too?
If my post helped, don't mind hitting THANKS
Hey guys, since i flashed CM10 and/or V30I KU5900 i have some problems with USB Debugging, i cannot use QtADB, or flash the CWM for example .
All drivers are installed but it just doesn't show up D:
Any suggestions?
Thanks for your Help .
In cm10 change your mode from MTP to camera. So just pull down the topbar, find the USB option there, while plugged to USB, open it, change it to Camera, unplug USB, plug in again and that's it.
For KU5900 repack, I cant tell you, but it should work similar. Dont forget to enable usb debugging in settings
N00BY0815 said:
In cm10 change your mode from MTP to camera. So just pull down the topbar, find the USB option there, while plugged to USB, open it, change it to Camera, unplug USB, plug in again and that's it.
For KU5900 repack, I cant tell you, but it should work similar. Dont forget to enable usb debugging in settings
Click to expand...
Click to collapse
Well, it looks like it's working as USB Transfer on CM10 with CWM Flash but QtADB doesn't seen to work
I can't download the newest version of QtADB, i don't know why, it just doesn't connect, so i'm using the 0.7.3 version .
If you can mirror it i'd be glad
Nikitozin said:
Well, it looks like it's working as USB Transfer on CM10 with CWM Flash but QtADB doesn't seen to work
I can't download the newest version of QtADB, i don't know why, it just doesn't connect, so i'm using the 0.7.3 version .
If you can mirror it i'd be glad
Click to expand...
Click to collapse
Sorry, I am on Linux now, when working with Android... So I only use the "real adb"
N00BY0815 said:
Sorry, I am on Linux now, when working with Android... So I only use the "real adb"
Click to expand...
Click to collapse
Okay XD
Thanks for the help once more : )
Added a mirror for you above
hey this is my first post so correct me if i do many mistake
i have rooted my phone LGp970 very first time...
now i have flashed the korean LG-KU5900 ICS V30I...
and now i can't use my menu,home,back,and search keys...
i can only use them if i put my cell to charge...
any solution for that..
or i m the only one having this problem???
i have read all the topics related to rooting,flashing,unbricking,etc before rooting my phone....
still i can be wrong.....but su is there after rooting...
btw i flashed using "ROM Manager" (i guess only method available for noobs like me)
i had wiped dalvik data(or cache idk) and wiped data also...and done nandroid backup saperately......
one mere thing while backing up some file named sd xlm(or idk) skipped....should i bother about it
.
.
.
.
.
.help me every possible way.....please
cause i can't access my sd as sd in korean ICS V30I because it shows it as internal storage....and i have only one phone so quick reply would be appriciated.....
an sorry for bad english....
rony3964 said:
i have rooted my phone LGp970 very first time...
now i have flashed the korean LG-KU5900 ICS V30I...
and now i can't use my menu,home,back,and search keys...
i can only use them if i put my cell to charge...
any solution for that..
or i m the only one having this problem???
i have read all the topics related to rooting,flashing,unbricking,etc before rooting my phone....
still i can be wrong.....but su is there after rooting...
btw i flashed using "ROM Manager" (i guess only method available for noobs like me)
i had wiped dalvik data(or cache idk) and wiped data also...and done nandroid backup saperately......
one mere thing while backing up some file named sd xlm(or idk) skipped....should i bother about it
.
.
.
.
.
.help me every possible way.....please
cause i can't access my sd as sd in korean ICS V30I because it shows it as internal storage....and i have only one phone so quick reply would be appriciated.....
an sorry for bad english....
Click to expand...
Click to collapse
first of all, try rebooting into recovery(cwm)
if you can't, download an app called quickboot or titanium backup
from your pc, download the sd card fix from the thread
with that, reboot into recovery
wipe data, cache, dalvik
then re-install the rom
afterwards install the sdcard fix
theaks30 said:
first of all, try rebooting into recovery(cwm)
if you can't, download an app called quickboot or titanium backup
from your pc, download the sd card fix from the thread
with that, reboot into recovery
wipe data, cache, dalvik
then re-install the rom
afterwards install the sdcard fix
Click to expand...
Click to collapse
it will fix my menu key,home key problem also right???
Galaxy note what an update, and now won't even start. Help please!
My Samsung note was updated from gingerbread to ice cream sandwich using Samsung Kies. Then rooted and put on the Franco kernel. That's when the problems started: lag city! It couldn't even play fruit ninja or noogra nuts. Everything was slow. subsequent updates wouldn't work. Every few hours it would remind me, and I would click dismiss.
I've also been using an aftermarket battery. When the battery would get low, screen would activate all pixels and go very bright. At this point I would have to hold down the power button. Anyway, the last time I did this was the last time the phone was on. When I try to start the phone it gets to the Samsung bit after the opening flash intro, and the Samsung just glows and blinks. I've tried many times but it doesn't work. If left in the state, it gets very hot and will Drain the battery very quickly.
I am able to get to the clockwork mod recovery. What shall I do from here? I see there's an option to backup, but how would I restore from and what all my data be there? I have some really important data on the phone that I'm hoping to recover. In fact some of that data is worth several hundred dollars, because it's my proof for my friend who was defrauded by a ticketing agent.
Your help would be really appreciated everyone!
From what I can tell, you haven't wiped so it shouldn't be a emmc brick.
You said you could get to CWM recovery so from there you should first mount your phone to your pc and back up anything important like that "several hundred dollar" info.
Y'know. Just to be safe.
Then download a safe kernel such as Hydracore or Philz and put it on your phone.
Flash it, reboot recovery, then do all 3 wipes and see if that solves your problem.
little-vince said:
You said you could get to CWM recovery so from there you should first mount your phone to your pc and back up anything important
Click to expand...
Click to collapse
Any idea how I can get that done? When I plug it into the PC, it says that the device has malfunctioned and is not recognized. I am a rather bit of a newb.
2011universal said:
Any idea how I can get that done? When I plug it into the PC, it says that the device has malfunctioned and is not recognized. I am a rather bit of a newb.
Click to expand...
Click to collapse
Go to Mounts and Storage>mount USB storage
Plug cable in.
little-vince said:
Go to Mounts and Storage>mount USB storage
Plug cable in.
Click to expand...
Click to collapse
Thanks again for the reply. When I do that and plug it in, the computer installs the device driver software correctly. However, I can't find the device either in "my computer" or in the device management/hard disk management console. I've tried this on two computers with the same result. The option to eject is in the tray icon (similar to other removable storage), but that's the only place it seems to be visible.
Flash a Philz kernel from franco recovery. Reboob recovery to get into Philz. Then mounts and storage /mount USB. PC will pick up both int & ext sd cards:thumbup:
Sent from my GT-N7000 using xda app-developers app
shoey63 said:
Reboob recovery to get into Philz.
Click to expand...
Click to collapse
He he. u use this a lot..
here is the philz thread
http://forum.xda-developers.com/showthread.php?t=1901191
just check ur rom build in settings and download the kernel .zip file and install it from recovery.
nokiamodeln91 said:
He he. u use this a lot..
here is the
Click to expand...
Click to collapse
Yeah I know. There's faster kernels but no better recovery mode
Sent from my GT-N7000 using xda app-developers app
nokiamodeln91 said:
He he. u use this a lot..
here is the philz thread
http://forum.xda-developers.com/showthread.php?t=1901191
just check ur rom build in settings and download the kernel .zip file and install it from recovery.
Click to expand...
Click to collapse
Thank you for the responses again. I'm afraid I'm so much a noob I don't know what to do even after visiting that thread. I'm not sure which one to download.
I can check my ROM build in settings because I can't start the phone..
Previously had noted the following about my phone:
PDA:
N7000XXKKA
Phone:
N7000XXKK5
CSC:
N7000XEUKK3
Thanks as always to you generous people willing to help out and save this NOOB.
PhilzDDLR9-INU.zip works on all ICS that I know of. They are interchangable amd backwards compatible.
Sent from my GT-N7000 using xda app-developers app
this is GB and philz wont work..
seems u had the swiss firmware and u got updated to ICS.. so i am guessing now u have N7000XXLRI
download philz XXLRI..
i guess u dont have access to internal storage.. if u have a SD card .. put the kernel in it and then flash using cwm > install zip from SD
if no sd then put the phone in download mode and install using PC odin using PDA tab
---------- Post added at 06:30 PM ---------- Previous post was at 06:30 PM ----------
report back asa possible
2011universal said:
Thank you for the responses again. I'm afraid I'm so much a noob I don't know what to do even after visiting that thread. I'm not sure which one to download.
I can check my ROM build in settings because I can't start the phone..
Previously had noted the following about my phone:
PDA:
N7000XXKKA
Phone:
N7000XXKK5
CSC:
N7000XEUKK3
Thanks as always to you generous people willing to help out and save this NOOB.
Click to expand...
Click to collapse
Try hydracore 5.4 then. http://hecubus.com/xda/kernel/HydraCore/GL_HYDRACORE_v5-4_STD.zip
If you are unable to connect your phone to PC,
remove your sd card,
put it in a card reader or another phone that is alive
put the above downloaded kernel.zip on the sd card.
Now reinsert the sd card in your dead phone and
flash the kernel from the recovery.
in advanced menu, reboot recovery
Now wipe /data and reboot, you should be good to go.
he doesnot want to wipe data i guess..
nokiamodeln91 said:
he doesnot want to wipe data i guess..
Click to expand...
Click to collapse
Well, he can try rebooting w/o wiping data.
@OP: By the way what is the "critical" proof that you are talking about? Are they some photographs etc? In that case they are untouched during the wipe operation.
So this will allow me to boot the phone without wiping the data?
2011universal said:
So this will allow me to boot the phone without wiping the data?
Click to expand...
Click to collapse
dont know what u referring to.. install the philz kernel and boot into recovery and mount usb storage... backup what ever u need...
and ya as the previous post said... if ur crucial data is on a storage and not a data of app then it will be ok
anilisanil said:
Well, he can try rebooting w/o wiping data.
@OP: By the way what is the "critical" proof that you are talking about? Are they some photographs etc? In that case they are untouched during the wipe operation.
Click to expand...
Click to collapse
nokiamodeln91 said:
dont know what u referring to.. install the philz kernel and boot into recovery and mount usb storage... backup what ever u need...
and ya as the previous post said... if ur crucial data is on a storage and not a data of app then it will be ok
Click to expand...
Click to collapse
Thanks guys again. Trouble getting the forum to load here in China right now.
>the files are sound files in sound recorder app
>Ideally I'd be able to recover everything, but I'll take what I can get!
anilisanil said:
Try hydracore 5.4 then. http://hecubus.com/xda/kernel/HydraCore/GL_HYDRACORE_v5-4_STD.zip
If you are unable to connect your phone to PC,
remove your sd card,
put it in a card reader or another phone that is alive
put the above downloaded kernel.zip on the sd card.
Now reinsert the sd card in your dead phone and
flash the kernel from the recovery.
in advanced menu, reboot recovery
Now wipe /data and reboot, you should be good to go.
Click to expand...
Click to collapse
So I finally got this done and it is still not working. I am able to access the SD card, but not the internal storage. Another drive appears in My Computer, but it is greyed out. Any ideas?
2011universal said:
So I finally got this done and it is still not working. I am able to access the SD card, but not the internal storage. Another drive appears in My Computer, but it is greyed out. Any ideas?
Click to expand...
Click to collapse
Sounds like you've got corrupted rw permissions on internal storage. It's quite common, but the only way I know how to recover is a reflash with correct wipes.
Sent from my GT-N7000 using xda premium
Well I finally got it repaired. Expanded said it would take two months after I mailed it back to the UK. Got it done locally egger where two places said it was the power chip. The good news is the pics are there there, but the data is gone. Do you all recon there is someway else to get the data. If the pics are there maybe the data still can be recovered?
Also, do you think it is dangerous to use whatever the local place flashed on to it? There are a few Chinese apps on it. System says it Systemis hardcore 5 and android 4.0.3
Thank you guys.
Firstly, I apologize if this is in the wrong spot.
I'll just get to the point.
So about 6 months ago I was using the Galaxy Ace GT-S5830 (Aus) and as it has a terrible internal memory, I decided to root it and try to get some of the unwanted apps off. Worked like a charm, nothing wrong until I had to take the battery out as it froze one time and now I am stuck with a boot loop -.-
I tried looking into trying to fix it like I had in the past but I got frustrated and gave up. Now in current time, I want to try to fix it and get it working again. So I got the stock firmware as well as the latest version of CWM for it and the recommended version of Odin, I get the phone into download mode and then come across an issue where my laptop says that it's connected (while I have Odin up) but is an unrecognizable device. First thing I do is try to factory reset it through the recovery menu but I get the error- E:format_volume: make_extf4fs failed on /dev/block.mmcblk0p2
I did a google search on both the boot loop and the error but I can't do anything people have said to do/try as my laptop isn't letting it be a recognizable device
I have done everything I've read in the past and have learned from past experiences but no luck. So what can I do to get the phone to work again?
If anyone can, give the method with pictures as well as I can do it better through pictures rather than reading it and hoping all goes well
Thanks
Samsung Galaxy Ace GT - S5830 boot loop and error
Bigdanzo51196 said:
Firstly, I apologize if this is in the wrong spot.
I'll just get to the point.
So about 6 months ago I was using the Galaxy Ace GT-S5830 (Aus) and as it has a terrible internal memory, I decided to root it and try to get some of the unwanted apps off. Worked like a charm, nothing wrong until I had to take the battery out as it froze one time and now I am stuck with a boot loop -.-
I tried looking into trying to fix it like I had in the past but I got frustrated and gave up. Now in current time, I want to try to fix it and get it working again. So I got the stock firmware as well as the latest version of CWM for it and the recommended version of Odin, I get the phone into download mode and then come across an issue where my laptop says that it's connected (while I have Odin up) but is an unrecognizable device. First thing I do is try to factory reset it through the recovery menu but I get the error- E:format_volume: make_extf4fs failed on /dev/block.mmcblk0p2
I did a google search on both the boot loop and the error but I can't do anything people have said to do/try as my laptop isn't letting it be a recognizable device
I have done everything I've read in the past and have learned from past experiences but no luck. So what can I do to get the phone to work again?
If anyone can, give the method with pictures as well as I can do it better through pictures rather than reading it and hoping all goes well
Thanks
Click to expand...
Click to collapse
Try to carry out the sd card, then use odin to flash ROM Stock again;
after that do in recovery stock a factory rest and wipe cache partition.
daniga74
daniga74 said:
Try to carry out the sd card, then use odin to flash ROM Stock again;
after that do in recovery stock a factory rest and wipe cache partition.
daniga74
Click to expand...
Click to collapse
What do you mean by carry out the sd card? That's all I'm not understanding, sorry.
And I apologise for the lack of reply, haven't had any wifi since I made this post.
remove the sd card and flash the stock rom
I've done that but my laptop just says USB device not recognized and because of that, Odin can't pick up the phone. This is the only issue I'm having now.
Samsung Galaxy Ace GT - S5830 boot loop and error.
Bigdanzo51196 said:
I've done that but my laptop just says USB device not recognized and because of that, Odin can't pick up the phone. This is the only issue I'm having now.
Click to expand...
Click to collapse
It means that your laptop doesn't recognize your Galaxy Ace, try to install usb drivers again.
alternatively, if you are able to go in revovery mode (CWM):
format the sd-card from the laptop; create a new fat32 partition (primary) and copy on it Cyanogenmod 7.2;
inser the card in your ACE and flash it from recovery;
later you can re-install usb driver on laptop and flash stock rom.
daniga74
Bigdanzo51196 said:
Firstly, I apologize if this is in the wrong spot.
I'll just get to the point.
So about 6 months ago I was using the Galaxy Ace GT-S5830 (Aus) and as it has a terrible internal memory, I decided to root it and try to get some of the unwanted apps off. Worked like a charm, nothing wrong until I had to take the battery out as it froze one time and now I am stuck with a boot loop -.-
I tried looking into trying to fix it like I had in the past but I got frustrated and gave up. Now in current time, I want to try to fix it and get it working again. So I got the stock firmware as well as the latest version of CWM for it and the recommended version of Odin, I get the phone into download mode and then come across an issue where my laptop says that it's connected (while I have Odin up) but is an unrecognizable device. First thing I do is try to factory reset it through the recovery menu but I get the error- E:format_volume: make_extf4fs failed on /dev/block.mmcblk0p2
I did a google search on both the boot loop and the error but I can't do anything people have said to do/try as my laptop isn't letting it be a recognizable device
I have done everything I've read in the past and have learned from past experiences but no luck. So what can I do to get the phone to work again?
If anyone can, give the method with pictures as well as I can do it better through pictures rather than reading it and hoping all goes well
Thanks
Click to expand...
Click to collapse
Well from what you said above it seems that somethings wrong with the phones internal memory and not the sd-card. If you are having CWM recovery(the latest one) you can do this-
I assume that your phone is rooted and with CWM installed.
Download any custom rom
Boot into CWM.
Select wipe data reset and you ll see an option saying 'clean wipe to install a new rom' (something like this)
Install zip from sdcard and select the downloaded rom.
Report back if any problem.
All the best.
Sent from my GT-I9500 using XDA Free mobile app
Mandark52 said:
Well from what you said above it seems that somethings wrong with the phones internal memory and not the sd-card. If you are having CWM recovery(the latest one) you can do this-
I assume that your phone is rooted and with CWM installed.
Download any custom rom
Boot into CWM.
Select wipe data reset and you ll see an option saying 'clean wipe to install a new rom' (something like this)
Install zip from sdcard and select the downloaded rom.
Report back if any problem.
All the best.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
I've done the custom ROM part, I used Cyanogenmod 7.2 as daniga74 suggested.
But I'm still getting this error message when I tried to wipe data/factory reset in the CWM recovery menu: E:format_volume: make_extf4fs failed on /dev/block.mmcblk0p2
Here's a picture of it.
I apologize for it being rotated, the original picture isn't.
Bigdanzo51196 said:
I've done the custom ROM part, I used Cyanogenmod 7.2 as daniga74 suggested.
But I'm still getting this error message when I tried to wipe data/factory reset in the CWM recovery menu: E:format_volume: make_extf4fs failed on /dev/block.mmcblk0p2
Here's a picture of it.
I apologize for it being rotated, the original picture isn't.
Click to expand...
Click to collapse
Maybe your internal partitions are corrupted, try to flash a fresh STOCK rom via Odin and start again (Root+CWM5.0.2.6+Custom ROM)
Samsung Galaxy Ace GT - S5830 boot loop and error
Bigdanzo51196 said:
I've done the custom ROM part, I used Cyanogenmod 7.2 as daniga74 suggested.
But I'm still getting this error message when I tried to wipe data/factory reset in the CWM recovery menu: E:format_volume: make_extf4fs failed on /dev/block.mmcblk0p2
Here's a picture of it.
I apologize for it being rotated, the original picture isn't.
Click to expand...
Click to collapse
Before flash CM 7.2, try to format system and data partition from CWM (advanced menu);
if the operation was successfully flash the rom.
daniga74
Bigdanzo51196 said:
I've done the custom ROM part, I used Cyanogenmod 7.2 as daniga74 suggested.
But I'm still getting this error message when I tried to wipe data/factory reset in the CWM recovery menu: E:format_volume: make_extf4fs failed on /dev/block.mmcblk0p2
Here's a picture of it.
I apologize for it being rotated, the original picture isn't.
Click to expand...
Click to collapse
The error says "It fails to format sdext". Because, you don't have a sdext partition. Don't worry about it. It is normal.
Mandark52 said:
Well from what you said above it seems that somethings wrong with the phones internal memory and not the sd-card. If you are having CWM recovery(the latest one) you can do this-
I assume that your phone is rooted and with CWM installed.
Download any custom rom
Boot into CWM.
Select wipe data reset and you ll see an option saying 'clean wipe to install a new rom' (something like this)
Install zip from sdcard and select the downloaded rom.
Report back if any problem.
All the best.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
Viper The Ripper said:
Maybe your internal partitions are corrupted, try to flash a fresh STOCK rom via Odin and start again (Root+CWM5.0.2.6+Custom ROM)
Click to expand...
Click to collapse
Sent from my GT-S5570 using XDA Free mobile app
USB not recognized
are you using Win 8 or 8.1 on your laptop? Because win 8 / 8.1 cant work with samsung driver for s5830 via Odin. You must try it on older OS like win 7 to flash stock ROM.
Late reply/update
Sorry about the reply, haven't had much time to check on this as I've been moving and now have to use public wifi -.-
I have seemed to be able to get the Cyanogenmod to work and act as an OS for now, it's not what I was hoping for but it's letting me use the phone for now and that's good enough for me. Will have to properly flash it when I get the chance to and when I have a Win 7 computer to use, thank you gaineeg for pointing that out. It now makes more sense as to why it never picked up on my laptop (Win 8.1) but it did on my dads computer (Win 7).
Bigdanzo51196 said:
Firstly, I apologize if this is in the wrong spot.
I'll just get to the point.
So about 6 months ago I was using the Galaxy Ace GT-S5830 (Aus) and as it has a terrible internal memory, I decided to root it and try to get some of the unwanted apps off. Worked like a charm, nothing wrong until I had to take the battery out as it froze one time and now I am stuck with a boot loop -.-
I tried looking into trying to fix it like I had in the past but I got frustrated and gave up. Now in current time, I want to try to fix it and get it working again. So I got the stock firmware as well as the latest version of CWM for it and the recommended version of Odin, I get the phone into download mode and then come across an issue where my laptop says that it's connected (while I have Odin up) but is an unrecognizable device. First thing I do is try to factory reset it through the recovery menu but I get the error- E:format_volume: make_extf4fs failed on /dev/block.mmcblk0p2
I did a google search on both the boot loop and the error but I can't do anything people have said to do/try as my laptop isn't letting it be a recognizable device
I have done everything I've read in the past and have learned from past experiences but no luck. So what can I do to get the phone to work again?
If anyone can, give the method with pictures as well as I can do it better through pictures rather than reading it and hoping all goes well
Thanks
Click to expand...
Click to collapse
Well if your laptop doesnt recognize the device you will need to install the latest drivers of samsung device drivers. And then manually update device drivers from unknown device to adb sooner device. Then try flashing using odin.