[Q] Rooting help needed - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hey all im using note n7000 JB recently updated im trying to root my device with one click root but couldnt get the output. My home button is not working. If there are any other ways to root please help me out of this.
Thanks in advance...

Read this useful thread : http://forum.xda-developers.com/showthread.php?t=1329360

its not working
qnt said:
Read this useful thread : http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
ive tried all of them but no use:crying:

prdwy said:
ive tried all of them but no use:crying:
Click to expand...
Click to collapse
The easiest method is flashing a kernel including root associated to your ROM.
The Philz kernel is a good one, and nearly stock kernel with user friendly added CWM.

Can you boot into recovery? Check with adb if you can boot to recovery using
adb reboot recovery command.

Sorry but I'm not familiar with adb can you guide me through.?
Sent from my GT-N7000 using XDA Premium App

prdwy said:
Sorry but I'm not familiar with adb can you guide me through.?
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Check these links for comprehensive guide:
http://forum.xda-developers.com/showthread.php?t=2141817
and
http://forum.xda-developers.com/showthread.php?t=2265006
Edit: try the volume up+Home button(center button)+ power button, hold them together for few seconds and you should see stock recovery..
Edit: sorry just read again and found that your home button is not working

In settings developer menu enable usb debugging and then connect to pc. Install android sdk or adb tools from Google. Then in the adb folder there run command prompt and
adb devices - this should show device serial. If yes
Adb reboot recovery will put the phone in recovery mode.

i use this method to root my GN7000 international version http://forum.xda-developers.com/showthread.php?t=1886460

Hello!
prdwy said:
Hey all im using note n7000 JB recently updated im trying to root my device with one click root but couldnt get the output. My home button is not working. If there are any other ways to root please help me out of this.
Thanks in advance...
Click to expand...
Click to collapse
This is my first post on xda! Great to be here!
Back to topic:
Have you tried ExynosAbuse? It is a really easy process:
Exynos Abuse xda thread
Greetings, Paco

Exploit doesnot work on JB roms

result
nokiamodeln91 said:
In settings developer menu enable usb debugging and then connect to pc. Install android sdk or adb tools from Google. Then in the adb folder there run command prompt and
adb devices - this should show device serial. If yes
Adb reboot recovery will put the phone in recovery mode.
Click to expand...
Click to collapse
Failed to set prot mask <inappropriate ioctl for device>

Related

Can't boot. :( [SOLVED !]

Hello,
Please help me .
I had flashed .img file and nexus 1 bootscreen with AndroidCommander.
ok.
All process was ok. But when it restars it stucks in "Tattoo"
I tried remove battery and charge phone but it wont boot.
Pleeasee..
Help .
I need this phone .
Re: Can't boot.
have You made a nandbackup before?
Sorry, no.
Is your tattoo branded?
If not, just flash the shipped ROM!
See here:
http://forum.xda-developers.com/showthread.php?t=603286
No,
I buy it notbranded.
ok.
i try .
Hope it work.
Buthow about root?
I need root 2nd ? or not?
Zecanilis said:
Is your tattoo branded?
If not, just flash the shipped ROM!
See here:
http://forum.xda-developers.com/showthread.php?t=603286
Click to expand...
Click to collapse
Can i flash with this??
http://htcpedia.com/official_rom_htc_wwe_for_htc_click_tatoo/soft/htc-tattoo-rom
djemm1996 said:
Can i flash with this??
http://htcpedia.com/official_rom_htc_wwe_for_htc_click_tatoo/soft/htc-tattoo-rom
Click to expand...
Click to collapse
You don't need root. Just enter in fastboot (Press power + volume down buttons and then back button wen you're in)
Yes, flash that one
Thanks.
Now i'm download that ROM.
Zecanilis said:
You don't need root. Just enter in fastboot (Press power + volume down buttons and then back button wen you're in)
Yes, flash that one
Click to expand...
Click to collapse
But why i have this problem?
What i was doing wrong?
Android Commander is bad?
You shouldn't do this with any 3rd Party App because you don't know if the procedures are compatible for the Tattoo...Gain root with the m7 exploit, upload su and flash_image and then flash first a recovery, then you can make a nandroid backup and after this you can flash anything you want - custom recovery saves your life, trust me!
but how to get in adb?
When i go "cmd" -> "adb devices" it shows device not found
need help please.
djemm1996 said:
but how to get in adb?
When i go "cmd" -> "adb devices" it shows device not found
Click to expand...
Click to collapse
What OS do you have? Linux? If so, you must start adb server with root permisions:
- cd to dir where you have downloaded & extracted android sdk tools, eg „cd ~/bin/android-sdk-linux/tools“
- Type „sudo ./adb kill-server“ and then „sudo ./adb start-server“
- Type „adb devices“ and you should see you phone.
For Windows XP, Vista, Seven... I just don't know mate, maybe some driver problem :-/

Custom rom installing problem

Hey guys,
Yesterday i was wondering about installing custom rom to my galaxy s, but i have a little problem. When i open ROM manager and choose install from sd card and find my rom there, then one step in installing process just freeze. I use clockmod recovery v.2.5.1.2 and it freeze with every rom in Installing update step. Maybe someone can help me??
At the moment i have 2.1 official software and 2.2 is not supported in my region. I have rooted my phone with oneclickroot
"[WARNING!] Do Not flash Any ROM until you can get the 3 buttons DOWNLOAD MODE workin"
I don't understand what that means?
I have GT-I9000 International and i cant get to flash menu using combination vol up+ home key + power key
My phone:
Model number GT-I9000
Firmware version: 2.1 -update1
basedband version I9000XXJM3
Kernel version 2.6.29 [email protected] #2
Build number ECLAIR.XWJM5
Please help me
sc0rpp said:
"[WARNING!] Do Not flash Any ROM until you can get the 3 buttons DOWNLOAD MODE workin"
I don't understand what that means?
I have GT-I9000 International and i cant get to flash menu using combination vol up+ home key + power key
Click to expand...
Click to collapse
I believe that there's a solution to get your three buttons working. You need those three button combination in order to flash roms via odin/heimdall or through clockworkmod recovery.
Sent from my GT-I9000 using XDA App
rafi92 said:
I believe that there's a solution to get your three buttons working. You need those three button combination in order to flash roms via odin/heimdall or through clockworkmod recovery.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I can also go to clockworkmod recovery using rom manager, but i read http://forum.xda-developers.com/showthread.php?t=810685 this thread and there says that do not flash any roms if 3 buttons comb does not work, so basicly what shall i do?
sc0rpp said:
I can also go to clockworkmod recovery using rom manager, but i read http://forum.xda-developers.com/showthread.php?t=810685 this thread and there says that do not flash any roms if 3 buttons comb does not work, so basicly what shall i do?
Click to expand...
Click to collapse
That thread has a solution to solve the 3 button. Do that first.
Sent from my GT-I9000 using XDA App
http://forum.xda-developers.com/showthread.php?t=785201
But first i want to know ist this method working on me?
PDA: I9000XWJM5
PHONE: I9000XXJM3
CSC: I9000OXEJM1
I want just be sure that it does not broke my phone.
sc0rpp said:
http://forum.xda-developers.com/showthread.php?t=785201
But first i want to know ist this method working on me?
PDA: I9000XWJM5
PHONE: I9000XXJM3
CSC: I9000OXEJM1
I want just be sure that it does not broke my phone.
Click to expand...
Click to collapse
Yes follow the method on the link which you have given to get your 3 button recovery/download working FIRST before flashing a new ROM.
I assume you are very familiar with Odin since you know all those terms.
DO NOT flash a ROM without doing the 3-button recovery/download.
I dont understand about this: 5. Start a new command prompt and navigate to the folder / drive where adb is located.
If you haven´t downloaded adb yet, get it here.
I start a new command prompt, but what i must write there? Also i have unzip adb with 2 .dll files.
sc0rpp said:
I dont understand about this: 5. Start a new command prompt and navigate to the folder / drive where adb is located.
If you haven´t downloaded adb yet, get it here.
I start a new command prompt, but what i must write there? Also i have unzip adb with 2 .dll files.
Click to expand...
Click to collapse
Download the Android SDK from here:
http://developer.android.com/sdk/index.html
Get the .zip version.
For easy access extract it to your desktop.
After extracting run command prompt.
type in "cd desktop" followed by "cd android-sdk-windows"
From there, type in "cd tools", and then you can type in "adb reboot download"
You MUST extract it to your desktop in order for all the commands which I've put down to work.
when i type "adb reboot download" then i got error like 'adb' is not recognized as an internal or external command, operable programm or batch file.
okey i have finished the protsess and i worked Thanks!
sc0rpp said:
okey i have finished the protsess and i worked Thanks!
Click to expand...
Click to collapse
No problem. If you need any help just post it here
Cheers!

cannot get root or cmw working, help needed

hi there i have tried all the possible methods and i cannot get root to work or CMW to work.
ive unlocked the boot loader with the stock rom that avaiable in the tutorial but once it try to install CMW and root i get nothing...
fasboot does not recognize my device so i see no way out..
You can flash cwm with odin, you'll find the files on droidbasement.com. Sometimes it doesn't "stick" (for the lack of a better word) so do it twice. Then you can use rommanager ONLY to reboot into recovery, for nothing else! and proceed with the steps. Do not ever flash anything ever with rommanager.
Edit : link to the recovery http://droidbasement.com/galaxy/roms/cm9/p3/recovery.tar.md5
Sent from my Galaxy Nexus using xda premium
---------- Post added at 11:03 PM ---------- Previous post was at 10:58 PM ----------
For your own sake, try to get fastboot working, it's going to make your life easier. If you're using Windows 8 you're out of luck as the drivers are not correctly signed. (at least that was the case when I tried it last)
Sent from my Galaxy Nexus using xda premium
ramonams said:
You can flash cwm with odin, you'll find the files on droidbasement.com. Sometimes it doesn't "stick" (for the lack of a better word) so do it twice. Then you can use rommanager ONLY to reboot into recovery, for nothing else! and proceed with the steps. Do not ever flash anything ever with rommanager.
Edit : link to the recovery http://droidbasement.com/galaxy/roms/cm9/p3/recovery.tar.md5
Sent from my Galaxy Nexus using xda premium
---------- Post added at 11:03 PM ---------- Previous post was at 10:58 PM ----------
For your own sake, try to get fastboot working, it's going to make your life easier. If you're using Windows 8 you're out of luck as the drivers are not correctly signed. (at least that was the case when I tried it last)
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
hei! thanks a lot for the quick and detailed reply. i've tried it but once i get to the rom manager to reboot into recovery it says it does not has the privelege for the commands
alvespt said:
hi there i have tried all the possible methods and i cannot get root to work or CMW to work.
ive unlocked the boot loader with the stock rom that avaiable in the tutorial but once it try to install CMW and root i get nothing...
fasboot does not recognize my device so i see no way out..
Click to expand...
Click to collapse
Check my response in the other thread.
Its tricky but doable and quite worth it, since fastboot is very powerfull.
alvespt said:
hei! thanks a lot for the quick and detailed reply. i've tried it but once i get to the rom manager to reboot into recovery it says it does not has the privelege for the commands
Click to expand...
Click to collapse
You'll have to get fastboot working, no way around it then. There are a ton of links to different versions of drivers in this and other forums, one of them will work.
Sent from my GT-P7100 using XDA Premium HD app
There may be another way, IF the current ROM has adb installed.
Flash CWM in odin
Go to Settings->Developer options- and set Android debugging to on.
Go to the command line (on the platform-tools folder of the android sdk) and type "adb devices".
If it identifies the device, an id will appear; then type "adb reboot recovery" which should reboot the device into CWM.
pruano said:
There may be another way, IF the current ROM has adb installed.
Flash CWM in odin
Go to Settings->Developer options- and set Android debugging to on.
Go to the command line (on the platform-tools folder of the android sdk) and type "adb devices".
If it identifies the device, an id will appear; then type "adb reboot recovery" which should reboot the device into CWM.
Click to expand...
Click to collapse
people! thanks a lot i found a way to get the damn fastboot
http://dottech.org/tipsntricks/2153...ows-computer-for-use-with-your-android-phone/
hehe, thanks to all
alvespt said:
people! thanks a lot i found a way to get the damn fastboot
http://dottech.org/tipsntricks/2153...ows-computer-for-use-with-your-android-phone/
hehe, thanks to all
Click to expand...
Click to collapse
Nice package, but didnt you have the damn tools already?! Its the first 5 preliminary steps....
I had them but I don't know why they did not work. Lol
Sent from my Galaxy Nexus using Tapatalk

[Q] adb sideload returns error: closed with LG 4x

Hi,
I tried to root my LG Optimus 4x HD (p880) running Android 4.1.2 JB today. Unfortunately, it all came down to this:
adb sideload superuser.zip
error: closed
Click to expand...
Click to collapse
I tried using both of these guides:
http://forum.xda-developers.com/showthread.php?t=2230934
http://forum.xda-developers.com/showthread.php?t=2180688
I also tried to do adb usb before doing adb sideload with no success. I also tried to kill and restart the adb daemon many times. Then I tried with different adb versions and on Linux too, no success. USB Debugging had to be enabled for the device to get recognized at all by adb.
Can anyone help me? Or can anyone please tell me how to get more debug output?
Cheers,
Niels
I had the same problem on my Galaxy R and have read it to be wrong on other devices as well. I finally ended up using TWRP which had this working. Your situation is different though. Did you try to run it with administrative privileges/root access?
oticshe was
Adam77Root said:
I had the same problem on my Galaxy R and have read it to be wrong on other devices as well. I finally ended up using TWRP which had this working. Your situation is different though. Did you try to run it with administrative privileges/root access?
Click to expand...
Click to collapse
Yep, always the same error message.
Okay, nevermind, apperently I'm too stupid to read, when it said, I sould power on while holding the volume down key.
Sorry, folks!
Always use "adb devices" before to check your device are online
Sent from my LG-P880 using Tapatalk 2
Have you entered recovery and chose "apply update with adb"? If you have maybe its a driver issue
Sent from my LG-P880 using Tapatalk 4 Beta
Run "adb usb" before "adb sideload". It could help.
Dogue2000 said:
Run "adb usb" before "adb sideload". It could help.
Click to expand...
Click to collapse
Thanks that helped with my nexus 4.
Dogue2000 said:
Run "adb usb" before "adb sideload". It could help.
Click to expand...
Click to collapse
Thanks a lot! It helped me too!
superjose said:
Thanks a lot! It helped me too!
Click to expand...
Click to collapse
or adb devices . it lists your device if its connected and ready. if u r on linux start the adb server using "su" or in ubuntu using "sudo"
Nexus5 here and adb devices shows my device, adb usb didn't help.. :S
I am still getting "error: closed".. any other advice :cyclops:?
ewoks said:
Nexus5 here and adb devices shows my device, adb usb didn't help.. :S
I am still getting "error: closed".. any other advice :cyclops:?
Click to expand...
Click to collapse
not enough info. we dont know your operating system , we dont know what you did , we dont know if you have unlocked bootloader and installed recovery and which recovery. xda forum doesnt have any fortune teller provide more information
kessaras said:
not enough info. we dont know your operating system , we dont know what you did , we dont know if you have unlocked bootloader and installed recovery and which recovery. xda forum doesnt have any fortune teller provide more information
Click to expand...
Click to collapse
Stock KK4.4, not touched (just unpacked) and driver problems are of course Win7
hi
i have same problem with 4.1.2 v20c-ame i can't root when open root.bat its open then close
solved
I search about this problem it was a bluestack if u have it
try to close it from background process
Edit: apparently attempts at help are now considered spam. Comments deleted.
themitch said:
Again, these instructions are specific to my nexus. You might have to play with the specifics to find the update.zip options, but this should get you close enough. Hope this helps!
Click to expand...
Click to collapse
Please don't spam the Nexus stuff here, it's of no use.
Dogue2000 said:
Run "adb usb" before "adb sideload". It could help.
Click to expand...
Click to collapse
it helped me, but now appear device not found

[GUIDE] Unlock Bootloader and Flash Custom Recovery L90 D410, D405n, D405 [CWM][TWR]

THIS GUIDE IS ONLY FOR L90 D410, D405, D405n​
First of all, This is not my original work. I am just sharing this GUIDE for easy Bootloader Unlocking and flashing Custom Recovery to L90.
I have tested this method myself and it is working perfectly for me, but it is also possible that it might not work for you for some reasons, so don't panic, just post your problem or whatever error you are facing (please attach screenshot if possible). I or other thread members will try to troubleshoot it. After resolving the problem I'll update this post, so that other members do not face such problem again.
Click to expand...
Click to collapse
PLEASE, USE THIS TUTORIAL AT YOUR OWN RISK, IF SOMETHING WENT WRONG (because of your stupidity) ME OR XDA WILL NOT RESPONSIBLE FOR YOUR LOSS.
Click to expand...
Click to collapse
Root Access required to Unlocking Bootloader and Flashing Recovery. If you are already rooted then go on, if not then down towelroot apk from https://towelroot.com/ and root your phone and install superuser from play store.
If towelroot is not supported to your device, then follow my EASY ROOTING GUIDE below :-
[GUIDE] [NEW] Root All L90 Varients with Latest updates [EASY]
Click to expand...
Click to collapse
DEVICES FLASHED WITH THIS GUIDE AND TESTED OK: LG L90 (D410)
Follow this guide step by step :-
1. Download and extract L90_D4##_v10x_aboot.zip (# = your device model, x = version of stock firmware) and any custom recovery zip you want to flash from the attachments below this post to external sd card (aboot.bin should be on external sd (/storage/external_SD/aboot.bin) , not in any other folder.
2. Download and install terminal from play store and run it.
3. Now type following commands in terminal :-
su
dd if=/storage/external_SD/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Click to expand...
Click to collapse
(Grant superuse permission to terminal after typing "SU" command)
4. Exit terminal, download and install Flashify from play store. Run it and grant root access.
5. Tap on Recovery image > chose a file > select recovery.img file
6. Tap on Yup!
That's it you are done
HOW TO BOOT INTO RECOVERY PRESSING VOLUME AND POWER KEY
You can reboot to recovery via flashify app or following key combination: -
Power of your phone press both Volume Down + Power Button same time, As soon as the LG logo appears release both buttons and immediately press and hold same buttons (Volume Down+Power) again. Now Factory data reset screen will appear saying "Erase all user data & restore default settings?". Use volume down key to select "Yes" and press power button to confirm and now you should be in recovery. (Caution: Don't try this while stock recovery installed or it will erase all your data)
In case of brick or want to flash stock firmware, please follow this guide :
[Easy][GUIDE][UNROOT][RELOCK BOOTLOADER]Flash Stock KDZ Offline LG L90 [All Variants]
Here is also another method to unlock bootloder using ADB on PC by @SubliemeSiem
Guide to unlocking the bootloader on the L90 using ADB
I used evoname's autopatcher, does this aboot work for all variants from v10a to v10d? I thought they all had their separate aboots.
.
anyways the aboot patch works, tested on my d410 v10b
is "dd if=/storage/external_SD/aboot.binde" a typo?
I advice that users first enable fastboot and make backup before doing this.
Does this work on D405 v10b?
Only for D410
Sent from my LG-D410 using XDA Premium 4 mobile app
another typo :
"of=/v/block/platform/msm_sdcc.1/by-name/aboot"
the /v/ is supposed to be /dev/ right?
It was typing error crosswire, thanks for correcting me
Sent from my LG-D410 using XDA Premium 4 mobile app
thanks for twrp ty ty ty
Just press that thanks button instead of posting
Please help!!!!
Hi guys,
I've bricked my D415 by flashing the aboot.bin for the D410.
Now my device doesn't turn on, even when I connect the charger. However when I connect the charger cable with the battery out, the phone turnson and shows a signal to put battery back.
Is there any way to solve this issue? Maybe by reflashing the aboot.bin (I backed it up before).........
Help plz...
IPRJ25 said:
Hi guys,
I've bricked my D415 by flashing the aboot.bin for the D410.
Now my device doesn't turn on, even when I connect the charger. However when I connect the charger cable with the battery out, the phone turnson and shows a signal to put battery back.
Is there any way to solve this issue? Maybe by reflashing the aboot.bin (I backed it up before).........
Help plz...
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
follow my this guide
IPRJ25 said:
Hi guys,
I've bricked my D415 by flashing the aboot.bin for the D410.
Now my device doesn't turn on, even when I connect the charger. However when I connect the charger cable with the battery out, the phone turnson and shows a signal to put battery back.
Is there any way to solve this issue? Maybe by reflashing the aboot.bin (I backed it up before).........
Help plz...
Click to expand...
Click to collapse
If ADB still recognizes your device, then yes, flash back your original aboot image. Otherwise, it's KDZ flash. Did you zero out your laf partition to enable fastboot? If so, put device in fastboot mode and flash aboot backup with
Code:
fastboot flash aboot "path/to/aboot.bin"
shinobisoft said:
If ADB still recognizes your device, then yes, flash back your original aboot image. Otherwise, it's KDZ flash. Did you zero out your laf partition to enable fastboot? If so, put device in fastboot mode and flash aboot backup with
Code:
fastboot flash aboot "path/to/aboot.bin"
Click to expand...
Click to collapse
My device is completely dead...
It doesn't turn on.
No fastboot, no download mode, no adb, no life...
But when I connect the usb without the battery, the phone lights up and shows a missing battery icon. Only in that situation. other things do not work, the phone is "The Walking Dead, Last Season"
I think that the aboot is the bootloader of everything... but the question is "why does the phone show the missing battery icon, and then when I put the battery back it doesn't show anything...? No charging, [nothing].
Worked great on my new d410, thanks. I noticed cwm has no backup to ext sdcard. Its this a phone limitation or its from cwm recovery?, so I'll switch to twrp instead. Cus phone memory is too small for my full cwm backup
Sent from my LG-D410 using Tapatalk
Bricked....?
Hello all, I think I bricked my phone (lgl90 D410) I followed instruction from first post , also this is not the first time I do something like this on a phone.
Everything seamed to be fine during the process, but when I tried to boot in recovery the phone wont start at all, the only sign of "life" is when I pull out the battery and plug in the USB cable it shows maybe a warning that the battery is missing, that is all ((((,.
Can some one help me, can I fix this or I should go with warranty ? Thank you in advance !
BR,
Mike
miketgv said:
Hello all, I think I bricked my phone (lgl90 D410) I followed instruction from first post , also this is not the first time I do something like this on a phone.
Everything seamed to be fine during the process, but when I tried to boot in recovery the phone wont start at all, the only sign of "life" is when I pull out the battery and plug in the USB cable it shows maybe a warning that the battery is missing, that is all ((((,.
Can some one help me, can I fix this or I should go with warranty ? Thank you in advance !
BR,
Mike
Click to expand...
Click to collapse
Follow this guide
http://forum.xda-developers.com/showthread.php?t=2803479
[Easy][GUIDE][UNROOT][RELOCK BOOTLOADER]Flash Stock KDZ Offline LG L90 [All Variants]
i have done it a little different way that OP said. on my INDIAN D410
here is what i have done.
1.i have rooted with towelroot and install "supersu,busybox and quick boot "from playstore
2.enabled developer settings in about phone.
3.go to developer settings and enabled usb debugging
4.connect phone to pc in MTP mode
5.open terminal on my ubuntu(you can use windows with adb installed)
6.given following commands
adb devices
Click to expand...
Click to collapse
(accept the rsa key prompt if appears)
adb shell
su
Click to expand...
Click to collapse
(grand super user request)
dd if=/storage/external_SD/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
reboot
Click to expand...
Click to collapse
(after reboot go to adb shell again with su propmt)
dd if=/storage/external_SD/cwm.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Click to expand...
Click to collapse
(you can use cwm.img or twrp.img from quarx's cm11 thread)
in quick boot >>>click recovery>>grant super user
and you are in recovery.
i think this is a easy way as no one has to type commands on mobile which is cubbersome and liitle uneasy.
here you can copy paste if you want...
k2wl said:
i have done it a little different way that OP said. on my INDIAN D410
here is what i have done.
1.i have rooted with towelroot and install "supersu,busybox and quick boot "from playstore
2.enabled developer settings in about phone.
3.go to developer settings and enabled usb debugging
4.connect phone to pc in MTP mode
5.open terminal on my ubuntu(you can use windows with adb installed)
6.given following commands
(accept the rsa key prompt if appears)
(grand super user request)
(after reboot go to adb shell again with su propmt)
(you can use cwm.img or twrp.img from quarx's cm11 thread)
in quick boot >>>click recovery>>grant super user
and you are in recovery.
i think this is a easy way as no one has to type commands on mobile which is cubbersome and liitle uneasy.
here you can copy paste if you want...
Click to expand...
Click to collapse
Thanks for suggestion buddy,
I am aware of this method. You are just using a PC for hole process, but what I am thinking is, that not every L90 user can afford a PC (in INDIA) , but can afford Terminal app for free from play store
gdjindal said:
Thanks for suggestion buddy,
I am aware of this method. You are just using a PC for hole process, but what I am thinking is, that not every L90 user can afford a PC (in INDIA) , but can afford Terminal app for free from play store
Click to expand...
Click to collapse
but you can add this as a alternative method in OP .
people can use what ever they want to.....right??
k2wl said:
but you can add this as a alternative method in OP .
people can use what ever they want to.....right??
Click to expand...
Click to collapse
Thanks K2wl,
I'll update my post :good:
Great! Link for this thread added to Frequently Asked Questions - LG Optimus L90

Categories

Resources