Database Develop

BRICKED after dual recovery 1.7 installer?

Hi Guys,
I was on 1.434 and rooted my device with the Root_with_Restore_by_Bin4ry_v29.
everything worked like charm.
rebooted twice and checked that SU was there.
the next step was CWM for locked bootloaders.
downloaded the newest package lockeddualrecovery1.7.installer and followed the on screen instructions.
After finishing my device rebooted.
After the reboot I have purple/pink LED on and SONY logo on the screen. phone vibrates for half a sec every 10-15 seconds.
none of power / power +vol up / power + vol down combo works.
Can;t even shutdown the device.
The phone is in that state for 15 minutes already and doesnt seem to get any better.
Any ideas?

Post in Q&A or in dual recovery section.
Not here!
Sent from my Sony Xperia Z

Push power and Vol up as long as u feel 3 vibrations, then the phone is off. Try to restart. If this will not work you have to flash back to stock

Xperia Z bricked after restore with TWRP

Hey guys,
i had installed TWRP and flashed Excelsus 1.2.2 onto my phone.
Still on a locked bootloader.
When i went to restore my phone.
It restarted and is stuck on the SONY screen and the notification LED is red.
I've tried to connect it to flashtool, but it does not connect.
Tried the power + volume up button for 10 seconds [vibrates once + restarts]
Tried the power + volume up button for 15 seconds [vibrates thrice + restarts]
Tried the power + volume down button [nothing happens]
I can't shut down the phone.
and the Sony Update tool does not detect the phone.

Dookie1302 said:
Hey guys,
i had installed TWRP and flashed Excelsus 1.2.2 onto my phone.
Still on a locked bootloader.
When i went to restore my phone.
It restarted and is stuck on the SONY screen and the notification LED is red.
I've tried to connect it to flashtool, but it does not connect.
Tried the power + volume up button for 10 seconds [vibrates once + restarts]
Tried the power + volume up button for 15 seconds [vibrates thrice + restarts]
Tried the power + volume down button [nothing happens]
I can't shut down the phone.
and the Sony Update tool does not detect the phone.
Click to expand...
Click to collapse
Look at pervious threads or even my last posts I help someone with the same problem earlier hours of this morning
Sent from my C6603 using xda premium

Dookie1302 said:
Hey guys,
i had installed TWRP and flashed Excelsus 1.2.2 onto my phone.
Still on a locked bootloader.
When i went to restore my phone.
It restarted and is stuck on the SONY screen and the notification LED is red.
I've tried to connect it to flashtool, but it does not connect.
Tried the power + volume up button for 10 seconds [vibrates once + restarts]
Tried the power + volume up button for 15 seconds [vibrates thrice + restarts]
Tried the power + volume down button [nothing happens]
I can't shut down the phone.
and the Sony Update tool does not detect the phone.
Click to expand...
Click to collapse
Press power + volume buttons, let it to vibrate thrice and after vibrating thrice immediately release your hand from phone or maybe you could release it while in second vibration itself, this allows the mobile to switch off. Now you can go to flashtool, connect it in flash mode and flash stock firmware. I had this problem yday and I used this method to switch it off!

sorted it out.
I don't really know what i did though.
used Flashtool to flash the stock firmware onto the phone.
still didn't start.
Plugged in my phone a couple of times.
each time i did another driver would install.
i had already installed the Flashtool drivers.
after the last driver installed, the phone started up

Dookie1302 said:
sorted it out.
I don't really know what i did though.
used Flashtool to flash the stock firmware onto the phone.
still didn't start.
Plugged in my phone a couple of times.
each time i did another driver would install.
i had already installed the Flashtool drivers.
after the last driver installed, the phone started up
Click to expand...
Click to collapse
Great news mate, glad you got it sorted

bricked xperia Z
Maddhouse said:
Look at pervious threads or even my last posts I help someone with the same problem earlier hours of this morning
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Hi, I seem to be having the same problem, accidently flashed the wrong kernel on my xperia Z with stock jellybean 4.3 in hopes of rooting it but now it just gets stuck on sony logo. Could you direct me to the thread where you said you helped a guy with a similar problem? Can't seem to find it.. :good:
Thanx

[Q] Stuck on Htc Logo and can not power off

Hi Everyone;
I unlocked my phone for flashing custom rom. After unlocking i reebooted it and was normal. Then i flashed cwm via htc one toolkit. It was successfull as well. Then i go to cwm and made factory reset + wipe cache + dalvik cache. Then i go to install zip from sd card but i could not find my rom file. Thought, it was deleted while unlocking device. Then decided to reboot phone again to copy rom file into the phone and reboot.
But, when i rebooted phone from cwm, it stuck on HTC Logo( Quietly Brilliant screen). Waited sometime, but nothing happened. Then i tried to power off it and boot into bootloader or recovery. I press and hold power button but it does not respond anyhow. When i am holding power button ,back and home buttons are blinking but nothing happens. Almost five minutes i waited as holding down power button but phone does not power off anyhow. i tried all methods like vol down + power, vol up + power and both volume keys + power. But really nothing happens, just blinking back and home buttons. That's all.
I can not simply power off device. :crying:
I also tried boot device via fastboot commands but it says "waiting for device" means computer does not recognize device.
Guys, i need an urgent help. Please...

just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom

skinsfanbdh said:
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
Click to expand...
Click to collapse
just keep trying to reboot via holding power or power+vol down. if it doesnt reboot after 30 sec or so let go then try again. if that doesnt work you will have to wait for the battery to die. once you get to bootloader use all in one toolkit to erace cache. then boot to recovery and you rom should be there if not boot back to bootloader and sideload rom
Click to expand...
Click to collapse
First thank you for your quick reply. Unfortunatelly, power+vol down does not work at all. Maybe i tried 50 times.
Anyhow, after battery die. How can i boot into bootloader. I mean, can phone be charged again in this situation? Also, even if i manage to boot into bootloader or recovery how can i put custom rom file into phone. Actually, i did not use sideload or whatever you mentioned before.
I am serouisly confused now and don't know what to do.
Anyhow, as you said, firlst i need wait to battery die i think. Then i will report back whats happen.
Thank you again btw.

Blue_Shine said:
First thank you for your quick reply. Unfortunatelly, power+vol down does not work at all. Maybe i tried 50 times.
Anyhow, after battery die. How can i boot into bootloader. I mean, can phone be charged again in this situation? Also, even if i manage to boot into bootloader or recovery how can i put custom rom file into phone. Actually, i did not use sideload or whatever you mentioned before.
I am serouisly confused now and don't know what to do.
Anyhow, as you said, firlst i need wait to battery die i think. Then i will report back whats happen.
Thank you again btw.
Click to expand...
Click to collapse
yes your not the first person with this problem. hold power+vol down to get into bootloader. press power button in bootloader to get in fast boot mode. use all in one toolkit to erase cache and side load rom. i recommend all in one toolkit because it automates the process. just select the option then follow on screen steps

Good to hear that i am not the first person That means somehow there is a solution i beleive. Still waiting for battery die. even i had 50 percent battery at the begining but still it holds on I never say again htc battery is bad
I exeprienced that stucking on boot logo several times before with my other htc phones but holding power + vol down/up worked always. This is the first time for me that i faced with power button can not power off device.. Well, ,i hope i wish i can handle out this problem. Definetley with your help.
Regards,

I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:

Deeva said:
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Click to expand...
Click to collapse
Did you read the other posts in this thread? The way you do a "battery pull" on this phone is to HOLD the PWR + VOL DOWN button for ~15seconds. Your capactivie buttons will blink, too. On my device, it took exactly 15seconds to reboot. There have been some reports of some phones that get so stuck that you just have to wait until the battery dies and charge it back up.
Alternatively, if the computer is recongizing it, try to adb reboot recovery to try and get into the recovery.

Deeva said:
I am having the same problem and don't know what to do :crying:
Today I just got my One. Unlocked bootloader, rooted, flashed Android Revolution rom. Everything worked fine for a while... I wanted to reinstall the rom because I wanted to change some options in the installer - I did not wipe because it was the same rom (big mistake I guess!!). After making the installation option changes, when it was done it proceeded to reboot but now I am stuck in a white HTC logo boot loop hell... (with the red text at the bottom that says "this build is for development purposes only" etc). Holy crap I never had a phone that I could not remove the battery. I cannot get this back into recovery or ANYTHING, it just keeps looping... computer recognizes it, no problem with drivers or anything it just doesn't stay connected long enough (because of the constant looping) to be able to use the toolkit.
PLEASE any advice?? Can't even shut it down omg. Do I have a $600 brick here? :crying::crying:
Click to expand...
Click to collapse
no. if it turns on you should be ok. try holdind power+vol down to get into bootloader then try toolkit if it just stays on waiting for device press power button to get into fastboot mode from bootloader

skinsfanbdh said:
yes your not the first person with this problem. hold power+vol down to get into bootloader. press power button in bootloader to get in fast boot mode. use all in one toolkit to erase cache and side load rom. i recommend all in one toolkit because it automates the process. just select the option then follow on screen steps
Click to expand...
Click to collapse
hi again. this morning my battery finally out. Then i put my phone to the charger and started it in fastboot mode( that is a good new) Then i left it for 20-30 minutes to charge a little bit for flashing custom rom.Then i went to recovery and started adb sideload. Sideload was succesful and finally came to aroma installer of trickdroid. I chose my installation options and started to flash rom but process was frozen on 10 percent. It was saying unmount system, unmount cahce and both of them has notification as "already unmounted". But installation was not going on. Then again i tried to go back fasboot mode again by press and holding power+vol down but unfortunatelly lights are blinking but nothing happens again. I think i need to wait to battery die again.
Isn't it quite weird? Why power+vol down combination does not work for me anytime? So, do i need to wait for battery die in every frozen? Do you have any ideas or comments ?
Do i need to go back to stock first ?
EDIT : Battery was out again and i tried once more. This time installation (trick droid) was successful but it frozen at the end this time. And unfortunatelly i can not restart (power+vol down) it again again Holy crap, i am really pissed off with this problem.

O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.

Guide me with steps please
Blue_Shine said:
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Click to expand...
Click to collapse
Hi, I have the same problem now and I let my phone die but when I put it to charge and try to go in bootloader, it's doesn't go and gets stuck at the logo again.
Would you please guide me with the steps how u fixed your phone?

Blue_Shine said:
O..K...Finally, i managed to start my phone and now it works... Especially thank you skinsfanbdh for your support.
But still i don't know how to solve button configuration problem. But anyhow i think i won't need quite sometim to use it I hope someone can find a solution for that later.
Click to expand...
Click to collapse
Do u fix it,i have same problem.on Zenfone max.after successfully rom installation i reboot my phone thn it stuck on resurrection remix logo,then i go into recovery,and mount the stock image without wiping.then twrp showed that image installation successful.thn i reboot it in recovery but it stuck on asus logo.what can i do right now?

Fix it
skinsfanbdh said:
no. if it turns on you should be ok. try holdind power+vol down to get into bootloader then try toolkit if it just stays on waiting for device press power button to get into fastboot mode from bootloader
Click to expand...
Click to collapse
Today i fixed it via asus flash tool.with the right steps it can be flash to stock with no problem

What should I do if I can't even get to the boot screen? I tried holding down the power and volume up buttons, but it just restarts and goes back to the same HTC load screen, what do I do????

[Q] Bricked...

Hello,
I have a rooted One with PA on it. Tried to update to the last version of PA and the phone kept restarting (entered the ROM, and restarted after 30sec of so). Flashed gapps, boot.img, wiped cache still the same. After this i flashed [Kernel](002) One-M7 (UV/Intelliplug/dfsync/FauxSound/s2w/Hybrid Linux 3.4+) even though i did not knew what I was doing and now, the phone is stuck at Quietly Brilliant....I cannot do anything to it, and pressing POW+VOL DOWN does nothing...Is there anything else I can do?

Sigh...just sigh

Vorphs said:
Hello,
I have a rooted One with PA on it. Tried to update to the last version of PA and the phone kept restarting (entered the ROM, and restarted after 30sec of so). Flashed gapps, boot.img, wiped cache still the same. After this i flashed [Kernel](002) One-M7 (UV/Intelliplug/dfsync/FauxSound/s2w/Hybrid Linux 3.4+) even though i did not knew what I was doing and now, the phone is stuck at Quietly Brilliant....I cannot do anything to it, and pressing POW+VOL DOWN does nothing...Is there anything else I can do?
Click to expand...
Click to collapse
On the quietly brilliant screen keep the power button pressed ... the buttons light will start to flash, that is normal, keep the power button pressed till screen goes off and immediately press and hold the vol down button ... this should bring you back to Bootloader, flash another proper ROM and Kernel from recovery now

v-b-n said:
On the quietly brilliant screen keep the power button pressed ... the buttons light will start to flash, that is normal, keep the power button pressed till screen goes off and immediately press and hold the vol down button ... this should bring you back to Bootloader, flash another proper ROM and Kernel from recovery now
Click to expand...
Click to collapse
It was dark in the room I tried to boot in recovery -> I put the phone under a light bulb and it worked

[Q] Bricked Xperia c6603 that can't shut down

So the thing is, I decided to buy this phone from another person a few days ago while it was still working but it had this one problem where the owner told me about how the phone can't be shutdown unless the battery runs out of power. Any time you shut it down, it simply reboots instead. I thought it was most likely a problem I could fix after flashing, so I decided to buy it.
Using Flashtool I was able to see that if timed pressing the buttons and plugging it into my computer right before the reboot started, I could boot into flashmode. This phone came in the 4.4 KK firmware and the 10.5.1.A.0.292 Generic NCB build, so I flashed an older kernel and rooted it using Towelroot before reflashing the 10.5.1.A.0.292 Generic NCB kernal. After rooting (and testing if root apps can shut it down which didn't work either), with a locked bootloader I installed the XZDualRecovery using the method here because I was finding it so hard to unlock the bootloader and Flashtool wouldn't do it either. It automatically booted into TWRP recovery menu but when I tried to flash a ROM (existenz Ultimate 3.5 to be precise), it simply made the screen go black for a second and took me back to the recovery menu. So figuring it was a bad download, I downloaded a smaller ROM but when I rebooted I accidentally went into PhilZ Touch menu instead. Deciding to do the usual wipe before flashing, here's where I messed up like an idiot. I saw an option along the lines of "Wipe CLEAN for flashing ROM" or something and trusted it so much despite it saying it's gonna wipe the system partition clean as well (I still don't know why I accepted even when warned of that).
So basically now I have a system that boots the SONY splashscreen and then goes black with the back light still on unless the battery runs out. I can't shut it down no matter how long I hold the power button and if I restart, it boots back to the same thing. I have no recovery menu now thanks to my genius idea of wiping the system, and the only thing I can enter is flashmode. So when I try to flash an FTF firmware (I tried every firmware I could get) back into the phone with Flashtool, it would simply say "preparing for flashing" for about a minute before it says "device disconnected" because the phone decides to exit flash mode and boot normally. I have a locked bootloader (with bootloader unlocking allowed), so I can't flash recovery menus. When I try booting by holding the VolumeUp key and plugging it in, it enters flash mode only with the red LED on and I still get the same results on Flashtool.
Was wondering if there were any ways around this that I might have missed before deciding to open the phone and change the hardware? And if it comes to that, what would I need to change (have always been a software guy when it comes to phones)? Any tips and advice would be appreciated.
TLDR: Have a bricked c6603 from wiping the system, that can't shutdown and keeps rebooting and refuses to be flashed.

If you have time before the phone reboots, hold Volume UP and the power key for 15 seconds. The phone will vibrate once at 10 seconds. Keep holding the keys until you feel 3 vibrations. This will hard power down the phone.
Sent from my C6603

^I've tried this and it simply boots back up again.

Hmm. That should definitely shut the device down, not restart it.
Sounds like there could possibly be an issue with your power button. I've heard of issues with the power button after water damage. Have you checked the water ingress indicators under the flaps? If any are red, it points to earlier damage from water.
Sent from my C6603

kingvortex said:
Hmm. That should definitely shut the device down, not restart it.
Sounds like there could possibly be an issue with your power button. I've heard of issues with the power button after water damage. Have you checked the water ingress indicators under the flaps? If any are red, it points to earlier damage from water.
Sent from my C6603
Click to expand...
Click to collapse
Seems like you're right, I just checked it and it indeed has a faded red color on it. Do you think if I take the phone apart it the power button could be fixed or should I swap something else inside this from another Xperia?

7ty6er said:
^I've tried this and it simply boots back up again.
Click to expand...
Click to collapse
I experienced this problem
Pls hold down volume When u connect your phone to pc via flashtool,
It will connect in flash mode
After that , just flash 0.230 kernel via flash mode ( kernel not rom )
Then disconnect your phone
Turn it off ( hold power button and volume up till it vibrates 3 times )
Then before it turn on again , hold down the volume down and connect it to pc via usb and this time flash 0.283 Rom ( not kernel )
This worked for me