Hi everyone,
Long time no see.
I updated the ROM to the latest version last week, i.e. Android 4.1.2, n7000xxlso, kernel version 3.0.31-906407, builder number JZ054K.N7000XXLSZ. This update sucks as it drains my battery very much. In addition, the phone became less responsive possibly due to less 'free space/free memory' left. I would like to go back to my previous version, could anybody kindly advise how I can do that please? My phone is SIM-FREE, I am in England.
Many thanks in advance.
Download your old version and install it. Because you didn't tell us what your old version was, there isn't much help possible, isn't it?
a) Stock version from sammobile, install it with PC Odin
b) Custom Rom: follow the installation instructions in the specific thread.
ThaiDai said:
Download your old version and install it. Because you didn't tell us what your old version was, there isn't much help possible, isn't it?
a) Stock version from sammobile, install it with PC Odin
b) Custom Rom: follow the installation instructions in the specific thread.
Click to expand...
Click to collapse
Many thanks, ThaiDai
The previous version is Android 2.3.6, firmware version is 2.6.35.7-N7000xxkka, this info is retrieved from my previous post.
londoneye said:
Many thanks, ThaiDai
The previous version is Android 2.3.6, firmware version is 2.6.35.7-N7000xxkka, this info is retrieved from my previous post.
Click to expand...
Click to collapse
If you want to go back to this GB version, download it from sammobile.com or here from one of the old Stock Rom threads (please search yourself for it). Install it with PC Odin. If you do not know about this read Dr. Ketans's thread.
ThaiDai said:
If you want to go back to this GB version, download it from sammobile.com or here from one of the old Stock Rom threads (please search yourself for it). Install it with PC Odin. If you do not know about this read Dr. Ketans's thread.
Click to expand...
Click to collapse
Hi ThaiDai, many thanks.
However, I think I may have bricked my note now. I downloaded the official GB ROM (N7000XXLRK---4.0.4/12.07.24-N7000XEULP5---Download--United Kingdom / Ireland), which should be my previous ROM (the one I mentioned in previous post was wrong, I remember I have updated it to ICS). I closely follow the steps suggested by the post, and from Odin I see this info:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRK_N7000XXLRK_N7000XEULP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> zImage
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/003> Added!!
After this procedure, the phone reboots but stucks at 'SAMSUNG' logo and won't carry on anymore...
Urgent advice is need, please!
Many thanks.
Check if you can get into download mode.. If you can try to flash GB this time.. And also do not do any wipes on 4.0.4 in recovery (if can go into recovery mode).. Did you do any wipe on JB before flaahing ICS?
Sent from my GT-N7000 using xda app-developers app
treacherous_hawk said:
Check if you can get into download mode.. If you can try to flash GB this time.. And also do not do any wipes on 4.0.4 in recovery (if can go into recovery mode).. Did you do any wipe on JB before flaahing ICS?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Can get into download mode and recovery mode. I think perhaps I should try the latest JB ROM? Are you able to let me know which GB ROM to use this time?
Many thanks
You can try either JB or GB.. You can find them in dr ketans thread.. If you are installing jb then after flashing make sure to install philz kernel (zip file in stock recovery).. But as you are stuck you might have to do the wipes.. You may download philz kernel for ics corresponding to your firmware and do all the wipes and then flash jb..
Sent from my GT-N7000 using xda app-developers app
treacherous_hawk said:
You can try either JB or GB.. You can find them in dr ketans thread.. If you are installing jb then after flashing make sure to install philz kernel (zip file in stock recovery).. But as you are stuck you might have to do the wipes.. You may download philz kernel for ics corresponding to your firmware and do all the wipes and then flash jb..
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Many thanks, my friend.
I notice that the note can be charged thus I guess it is not 100% dead at this stage, it is possible I can save it.
Please could you advise some important steps on how to complete the process of installing an official GB ROM. My note is from O2 UK, ORIGINALLY UNLOCKED, and currently with T-mobile UK SIM card.
Questions:
1. Can I download the latest GERMANY version of GB or JB?
2. I know how to do 'downloading' mode and install ROM via PC Odin, but how to install Philz kernel through 'recovery' mode?
I would be most grateful if you could guide me to the steps for the whole process/steps to complete the ROM installation based on my situation, thanks so much!
londoneye said:
Many thanks, my friend.
I notice that the note can be charged thus I guess it is not 100% dead at this stage, it is possible I can save it.
Please could you advise some important steps on how to complete the process of installing an official GB ROM. My note is from O2 UK, ORIGINALLY UNLOCKED, and currently with T-mobile UK SIM card.
Questions:
1. Can I download the latest GERMANY version of GB or JB?
2. I know how to do 'downloading' mode and install ROM via PC Odin, but how to install Philz kernel through 'recovery' mode?
I would be most grateful if you could guide me to the steps for the whole process/steps to complete the ROM installation based on my situation, thanks so much!
Click to expand...
Click to collapse
Check the this link for downloading stock JB and also for install method:
http://forum.xda-developers.com/showthread.php?t=1424997
first you need to put the philz kernel (zip version not tar) on your external memory from here:
http://www.mediafire.com/?3ale6m9q6b6a3
and then go to stock recovery and select install zip and choose the zip file and flash it, reboot to recovery again, do all the wipes and try flashing JB from 1st link.
treacherous_hawk said:
Check the this link for downloading stock JB and also for install method:
http://forum.xda-developers.com/showthread.php?t=1424997
first you need to put the philz kernel (zip version not tar) on your external memory from here:
http://www.mediafire.com/?3ale6m9q6b6a3
and then go to stock recovery and select install zip and choose the zip file and flash it, reboot to recovery again, do all the wipes and try flashing JB from 1st link.
Click to expand...
Click to collapse
Great advice, a very big thank you my dear friend. I saved my note, hahahahaha.....
londoneye said:
Great advice, a very big thank you my dear friend. I saved my note, hahahahaha.....
Click to expand...
Click to collapse
Glad to hear that...
Related
Hi all,
I was on the UK Stock 4.03 + Root....
I was trying to connect to a Blue-tooth Device today and the phone was frozen, so I turned it off....
When I tried to turn it back on...it won't go pass the "Samsang Galaxy Note" screen....(it would restart it self every time it reaches that screen)
I tried flashing it to the 4.0.4 German Stock via Odin...and the problem is still there....
is my phone BRICKED??
Please HELP~~!
THANKS!
Forgot to mentioned that when I was trying to reboot the phone for the first time....I had a USB Stick plugged into the phone...dunno if that was the cause of the problem
You said tried to flash 4.0.4, that is insufficient information
whether it was successfull or not?
do you rememeber wat exactly last msg ?
Did u try to completely remove the battery then reflash again stock ics through odin?
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗
Yeah...I did a flash of this Stock ROM "N7000XXLRG" from this page: http://forum.xda-developers.com/showthread.php?t=1424997.
The flash was SUCCESSFUL by Odin. However, When the phone rebooted after the flash the problem is still there (phone keep restarting once it reaches the "Samsung Galaxy Note" screen)
btw.. this is the log of the flash in Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRG_N7000DBTLRG_N7000XXLRB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> factoryfs.img
<ID:0/004> NAND Write Start!!
<ID:0/004> zImage
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
Also...when I am trying to get into recovery mode....it shows the pic of the Android bot lying on the ground with a red triangle??
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
dr.ketan said:
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
Click to expand...
Click to collapse
Thanks for your reply again....is there a SAFE instruction of how I can flash GB ROM by using Odin?
You meant a STOCK GB or CUSTOM one?
Does it matter if I flash the German one when I was on the UK one originally?
THANKS AGAIN
Find stock rom thread by me from stickies in development section
Download ANY stock.gingerbread rom and flash using pc odin
Guide is available on same thread post #2.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Find stock rom thread by me from stickies in development section
Download ANY stock.gingerbread rom and flash using pc odin
Guide is available on same thread post #2.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
ok...downloading now....will let you know the result soon....THANKS
DMax99, hope everything goes well for you! When you were on ICS, didn't you flash a safe kernel like Speedmod? Keep us updated on your situation!
dr.ketan said:
It seems you have got bootloop
and least chances that you have data.img corrupt
For safety you just download any GB ROM and flash using PC Odin, after that go to recovery and wipe cache and data, it will be solved if only bootloop is there.
if you get error on wiping then it is case of brick bug.
Click to expand...
Click to collapse
THANKS Doc.....by flashing the GB STOCK has solved the problem
How can I avoid this from happening in the future? Because I want to upgrade to ICS again
Final5k said:
DMax99, hope everything goes well for you! When you were on ICS, didn't you flash a safe kernel like Speedmod? Keep us updated on your situation!
Click to expand...
Click to collapse
No I didn't....where can I get that Kernel? and do I just flash it in CWM?
cheers for the suggestion
Congrats
It was likely to revive as i said it was seems to be a bootloop rather true brick
Dont worry it was just incidence, n not likely to repeat.
You can flash ics now safely. But first wipe cache and data before flashing ics if you have not perform it still.
Sent from my GT-N7000 using xda premium
Speedmod can be flashed in Odin.
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
Main thread - go there if you have questions :
http://forum.xda-developers.com/showthread.php?t=1673072
Final5k said:
Speedmod can be flashed in Odin.
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
Main thread - go there if you have questions :
http://forum.xda-developers.com/showthread.php?t=1673072
Click to expand...
Click to collapse
so....
1. this kernel works with any stock ICS ROM?
2. Does it affect any performances....for example making the phone laggy?
cheers
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
you give not detail as needed. but nevermine, from the last part it seems you has bricked your phone.
i think you might need to refer "hg42" thread to revive your note.
Sad to be hear that.
Sent from my GT-N7000 using xda premium
immediately contact dr.ketan
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
Contact dr.ketan for yr solution. He is the sweet n right person to guide u.
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
No luck...yet.
letters_to_cleo said:
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
Click to expand...
Click to collapse
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Reflash it with PC odin (Again? )... refer to Dr Ketan... I encounter same issues before, I just try try to reflash old GB... link at #4
khaino said:
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Click to expand...
Click to collapse
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Tried that, but not sure about the latest desktop version.
Alba Donzo said:
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Click to expand...
Click to collapse
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
Latest Odin is 3.0.4
Sent from my GT-N7000 using xda app-developers app
khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar" or go here - https://www.dropbox.com/s/yoe791qq3atbung/AbyssNotekernel42CWTouchOriginalLogo.tar).
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Question!
Alba Donzo said:
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar"
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Click to expand...
Click to collapse
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
khaino said:
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
Click to expand...
Click to collapse
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Just a quick question.
Alba Donzo said:
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Click to expand...
Click to collapse
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
khaino said:
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
Click to expand...
Click to collapse
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Update.
forest1971 said:
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Click to expand...
Click to collapse
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
khaino said:
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
Click to expand...
Click to collapse
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Update and question.
forest1971 said:
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Click to expand...
Click to collapse
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
khaino said:
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
Click to expand...
Click to collapse
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Update.
forest1971 said:
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Click to expand...
Click to collapse
Hi bro, it somehow managed to get on CWM and but any flashing was aborted. And tried to flash Criskelo, but got stuck at installing, no progress. What should I do? Thank you.
Just two options above, warranty or repartition.
Sent from my phone
Hello all,
I read now the warning post and I understand now that probably I shouldn't have done it (so please be gentle ).. however maybe someone can still help me with my situation:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA (maybe that was also a mistake?). After it was finished it restarted by itself and now its in the following status:
- stucks at GALAXY NOTE N7000 logo. Sometimes blinks, but never goes beyond it.
- Recovery mode exactly same - stuck at logo.
- when plugging USB it will show the battery, but it's like stuck then.
- Tried download mode, but it's stuck at Downloading... forever.
I couldn't find the exact case as mine, that it restarted by itself and stuck at logo now.
I backed up everything, the previous ROM and etc.
I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
And most importantly, what should I do now? Can I do something via the download mode? I don't think Odin recognizes any connected device when I plug in the USB, but I don't know how to check if it does or not..
Thanks in advance!
Switch to download mode, connect to PC and install a stock JB (be sure to install the USB drivers before).
Make a snapshot of the errors an post it here.
http://forum.xda-developers.com/showthread.php?t=1424997
May be this helps ...
Just flash a new stock rom..
Sent from my GT-N7000 using xda premium
i believe u use wrong kernal so it's stuck ! if u don't ever do any factory reset or wipes then u're stillsafe !
if u do so ? then just follow the instructions above given by the 2members here :p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation !
Trying
alvinhaw said:
i believe u use wrong kernal so it's stuck ! if u don't ever do any factory reset or wipes then u're stillsafe !
if u do so ? then just follow the instructions above given by the 2members here :p
if u still haven't do any wipes n factory reset then look for philz safe kernal wif ur rom version flash it n let it update for mins
n ur phone will resume operation !
Click to expand...
Click to collapse
Trying all that right now, will keep you posted.
what is my stock ROM?
whatever61 said:
Trying all that right now, will keep you posted.
Click to expand...
Click to collapse
I don't understand this.. my stock ROM was:
Baseband Version: N7000XXLB2
Kernel Version: 2.6.35.7-N7000XXLC1-CL1003701 [email protected] #2
Build number: GINGERBREAD.XXLC1
I don't know what coutnry, I bought it from Netherlands, I live in Belgium, but it could be from any country in the region!
I cannot find this one exactly. I find many with N7000XXLB2 and many with N7000XXLC1.
Which one should I choose?
Also, can I install a JB or ICS directly?
Please let me know I'm doing it right (cause this is getting really insanely ridicilous):
1. I install PhilZ recovery mode via the phone recovery mode.
2. I install a stock ROM (I tried many) via Odin download mode.
All the time stuck as Galaxy N7000 logo. Never goes past it.
Every time I install a stock ROM it also removes the Philz recevory mode, but maybe that's ok..
Anything I'm doing wrong??
Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.
ThaiDai said:
Why don't you follow my advice from second post and then show us a snapshot of PC Odin.
No need for Philz when installing a stock Rom with PC Odin (it's always deleted).
And tell us what Rom you install.
Click to expand...
Click to collapse
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..
whatever61 said:
So I don't wipe anything and just go to download mode and install a PDA file of a STOCK ROM, that's it?
I tried that, but now I will be more specific (and in another guide they say to do some steps before, so its very confusing already).
I also asked above how do I know which ROM I should install?
and also, how do I get errors log? there were no errors when I was installing the PDA..
Click to expand...
Click to collapse
Just let THAIDAI knows which stock rom u're flashing !
alvinhaw said:
Just let THAIDAI knows which stock rom u're flashing !
Click to expand...
Click to collapse
Ok, here we go.
I was trying with ROM: N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5
This is what I got from Odin (I hope that's what you meant by snapshot and not actual screenshot or something ):
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> factoryfs.img
<ID:0/008> NAND Write Start!!
<ID:0/008> zImage
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> cache.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
This is something new: just after it was completed it booted to recovery mode and gave me the following message:
Android system recovery <3e>
Finding update package
bla bla
Successfuly installed package.
Wiping cache..
Formatting /cache
Cache wipe complete.
E:failed to mount /data (unknown error: 0)
your storage not prepared yete, please use UI menu to format and reboot actions.
copy application failed.
Applying multi-CSC
Can't access to '/system/csc/ATO/system'
Successfully applied multi-CSC.
and it still doesn't boot.. gonna try another ROM now and post here the results.
Now tried with:
N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5
This is the original original ROM that I had when I just bought the phone.3
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRI_N7000XXLRB_N7000XEFLP2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> factoryfs.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> zImage
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
No going into recovery mode after restart this time and still same problem.
when you flash a stock rom with pc odin, the phone may not boot. If you have flashed a GB rom then when you are stuck at logo enter stock recovery with three button combo and then wipe data factory reset, wipe cache and then reboot.
I flashed a stock rom as explained above, not a GB. I tried wiping cache and all data through recovery. Nothing helps. You say it might not boot, so how do I make it boot with Stock ROM?
stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot
rraaka said:
stock roms can be ginger bread (GB), or ICS or JB (jelly Bean)
flash a GB stock rom, wait for the proceedure to finish completely, when you see its not booting then use three buttons to get into stock recovery and then wipe then reboot
Click to expand...
Click to collapse
I already did, the last post was a GB, i tried to wipe out everything afterwards also.
ThaiDai, please see my replies, I did as you requested..
Thanks
whatever61 said:
I've rooted my Galaxy Note with ClockworkMod recovery successfully and then busybox.
Then I went to recovery mode again (after restarting the phone), however it loaded Android regular recovery mode (not Clockwork), so I installed Clockwork again and without restarting performed WIPE DATA ...
....I am aware of the bricking bug of ICS, however I had the ClockworkMod installed, so what did I do wrong??
Thanks in advance!
Click to expand...
Click to collapse
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now
it might be mess up.. try get 5files wif bootloader n place it accordingly in odin .
go here to study http://forum.xda-developers.com/showthread.php?t=1424997
shoey63 said:
By "ClockworkMod" you mean CWM.zip right? This is a temporary recovery that disappears upon reboot. It also LETHAL to wipe with when running on top of a stock ICS kernel.
So to sum up;-
You were running Stock ICS.
You flashed CWM.zip (from YouTube or where ever) from stock 3e recovery and then flashed Root/busybox file.
Booted back into stock recovery, flashed CWM.zip again and performed wipe data/factory reset with it.
How am I going so far?
Bad news - you have most likely superbricked your device.
If so,new MOBO or repartition is only way out now
Click to expand...
Click to collapse
Yep, emmc bricked. Send it to servicecenter, they repaired it for free, for me. Or you can do the workaround http://forum.xda-developers.com/showthread.php?t=1667886 , but i dont would do that, as you will get many freezes maybe. Thats very annoying.
Regards
HELLO team,
I need help, i have a samsung galaxy S Advance I9070, i have try to install rom thru ODIN but the when phone boot, i did not boot at all, now i cannot access the Recovery mode (Volumen Up + Home+Power) only let me go to the download mode (Volumen down+Home +Power) that the only option the phone stays in SAMSUNG GALAXY S Advance GT-I9070, please advice the steps to fix thix thru ODIN and please also the file, PIT
PDA
PHONE
CSC
file so tha i can try fix this please HELP ME THANKS !!!!!!
EJCH said:
HELLO team,
I need help, i have a samsung galaxy S Advance I9070, i have try to install rom thru ODIN but the when phone boot, i did not boot at all, now i cannot access the Recovery mode (Volumen Up + Home+Power) only let me go to the download mode (Volumen down+Home +Power) that the only option the phone stays in SAMSUNG GALAXY S Advance GT-I9070, please advice the steps to fix thix thru ODIN and please also the file, PIT
PDA
PHONE
CSC
file so tha i can try fix this please HELP ME THANKS !!!!!!
Click to expand...
Click to collapse
Hi, download a firmware here, extract the .tar.md5 file from downloaded zip then open Odin and press only "PDA" button, select extracted file, connect the device in Download Mode and press "START" button. Try if works in this way. Remember that if you have Jelly Bean installed you must reflash a Jelly Bean version.
thanksssss finally the phone restart !!! That wonder full now the touch screem is very very crazy i will like to now how to downgrade it to jb please !!!!
EJCH said:
thanksssss finally the phone restart !!! That wonder full now the touch screem is very very crazy i will like to now how to downgrade it to jb please !!!!
Click to expand...
Click to collapse
You mean to downgrade to GB? Here: http://forum.xda-developers.com/showthread.php?t=2100642
Sent from my GT-I9070 using Tapatalk
Thank, for the help but does the touchscreen have something to do, its work just that its move by itself sometimes......
EJCH said:
Thank, for the help but does the touchscreen have something to do, its work just that its move by itself sometimes......
Click to expand...
Click to collapse
Try to do factory reset from recovery.
shut_down said:
Try to do factory reset from recovery.
Click to expand...
Click to collapse
Thanks so much but i try already I have no recovery install, recomendation for one ??? and how to install it thanks
EJCH said:
Thanks so much but i try already I have no recovery install, recomendation for one ??? and how to install it thanks
Click to expand...
Click to collapse
From stock one. You do have it.
help ??
i have problem.... my gfs samsung s i9070 somehow bricked and wont pass through the bootscreen. wont let me enter recovery,,but it goes to download mode. i tried to flash it with stock rom but every time i get fail msg and error on mby 20-30% progress... can anyone explain me what am i doing wrong ??
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070XXLQE_I9070OXXLQE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> kernel.bin.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin.md5
<ID:0/003> system.img.md5
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
what stock firmware version you mobile?jelly bean or gingbread?
smeth_90 said:
what stock firmware version you mobile?jelly bean or gingbread?
Click to expand...
Click to collapse
im not sure... its my girlfriends phone... i downloaded I9070XXLQE_I9070OXXLQE_HOME.tar from http://www.sammobile.com/firmwares/ and tried over Odin and that Fail msg keeps showing up. like i unplug phone. it just turns off and nothing.
---------- Post added at 03:14 PM ---------- Previous post was at 03:10 PM ----------
smeth_90 said:
what stock firmware version you mobile?jelly bean or gingbread?
Click to expand...
Click to collapse
dont know if thats 4.1.2 or 2.3.6... is there a way to check what version is the firmware that i downloaded ? coz on that samsung site there is no version stated next to it :S
k,if u phone firmeware version before this use jelly bean, flash again stock firmeware jelly bean..try to search the jelly bean stock flashing firmeware..i hope this can help u..i also face the problem before this time..my phone stuck at logo..i flashing jelly bean firmeware..done..root,install kernal to overclocking..done..1.2ghz..
smeth_90 said:
k,if u phone firmeware version before this use jelly bean, flash again stock firmeware jelly bean..try to search the jelly bean stock flashing firmeware..i hope this can help u..i also face the problem before this time..my phone stuck at logo..i flashing jelly bean firmeware..done..root,install kernal to overclocking..done..1.2ghz..
Click to expand...
Click to collapse
which kernel did you flash???.....i have flash Cocore kernel but it's too battery draining kernel....
MR.Ro said:
which kernel did you flash???.....i have flash Cocore kernel but it's too battery draining kernel....
Click to expand...
Click to collapse
Use greenify and one power guard..no frill cpu is set cpu freq..not set for performance to avoid battery drain fast..
Sent from my SM-N9208 using Tapatalk
smeth_90 said:
Use greenify and one power guard..no frill cpu is set cpu freq..not set for performance to avoid battery drain fast..
Sent from my SM-N9208 using Tapatalk
Click to expand...
Click to collapse
Thanks dude.
i was want just change my old recovery software, so i install TWRP recovery that time i facing this problem.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone?
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
saha.gobinda89 said:
i was want just change my old recovery software, so i install TWRP recovery that time i facing this problem.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone?
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
Click to expand...
Click to collapse
if u r eble to boot u r phone in to download mode then its not being bricked i think u r not flashed file properly
Step-1: Download Android Jelly Beanofficial firmware for Samsung Galaxy S Advance to the computer
Step-2: Extract the downloaded zip file using Winzip, Winrzr, 7zip or any other extracting tool to get a file with .tar.md5 extension
Step-3: Download latest Odin software which will help to install the Jelly Bean firmware. Extract the Odin zip to getOdin exe
Step-4:Switch off the Galaxy S Advance and wait for five to six seconds for the vibration to confirm the power off
Step-5:Boot the phone into Download Mode by pressing and holdingVolume Down,HomeandPowerbuttons together. A warning screen will appear, now press theVolume Upbutton to continue to enter into Download Mode
Step-6:RunOdin.exe as an Administrator
Step-7:Connect the Galaxy S Advance to the computer using USB cable while the device is in Download Mode. Wait for some time until Odin detects the device. When the device is connected successfully, an Added message will appear under Odin. Also, the ID: COM box in Odinwill turn blue indicating all the drivers are installed successfullyNote:If theAddedmessage does not appear, then try the USB port at the back of the computer. In case Odin still fails to recognsie the device, then re-install USB driver.
Step-8:Click thePDAbutton and select the (tar.md5 file)
step-9: Verify that Auto Rebootand F.Reset Timecheckboxes are selected in Odin window. Also, ensure that the Re-Partition option is unchecked
Step-10:When everything is set, hit theStartbutton in Odin. The installation process should begin now and would take few minutes to complete
Step-11 once the installation process is completed, the phone will reboot automatically. And soon a PASS message with green background will appear in the extreme left box at the very top of Odin indicating successful installation.
phone get rebooted with samsung logo
Now safely unplug the USB cable from the phone to disconnect it from the computer
How to Fix Bootloop Issues
1) While installing the firmware if thePASSmessage does not display or the device gets stuck for a long time, then disconnect the phone from the computer. Remove the battery and re-insert it, check the USB connection, re-install the USB driver and disable KIES. Enter Download Mode and repeat the whole procedure.
2) If bootloop occurs or the device is stuck in welcome screen logo, then boot the phone into recovery mode. To do so, press and hold theVolume Up,HomeandPowerbuttons together. In recovery mode, perform data wiping task by selectingWipe data/factory resetthen selectWipe Cache Partition.Reboot the phone in normal mode by selectingreboot system now.When the phone boots up, it should be running on the official build. In recovery mode, useVolumekeys to scroll between the options and use thePowerbutton to select the particular option. Performing wiping task will erase the internal memory of the device.
Just flash firmware with odin, after it says "pass", remove cable and let your device boot and mostly (a.f.a.i.k) it doesn't boot, take out battery, go to recovery mode and wipe data/factory reset and after that reboot your phone.
sent with my S Advance
nalityta collect
Thank you very much my phone is now okay.......:laugh::good::angel:
saha.gobinda89 said:
Thank you very much my phone is now okay.......:laugh::good::angel:
Click to expand...
Click to collapse
just press thnx button if u can
Now i am facing another problem, my samsung galaxy s advance is 16 GBbut when i format my USB storage its show that 3.92 GB.....what can i do now. where is my rest of the storage 7 GB.......
PLEASE HELP ME.......
saha.gobinda89 said:
Now i am facing another problem, my samsung galaxy s advance is 16 GBbut when i format my USB storage its show that 3.92 GB.....what can i do now. where is my rest of the storage 7 GB.......
PLEASE HELP ME.......
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2096093
dimentl under
How to Update my samsung galaxy s advance gt i9070 16 GB Android jelly bean 4.1.2 to kitkat 4.4.2..... help me
give me solution in easy way....... plz help me
saha.gobinda89 said:
How to Update my samsung galaxy s advance gt i9070 16 GB Android jelly bean 4.1.2 to kitkat 4.4.2..... help me
give me solution in easy way....... plz help me
Click to expand...
Click to collapse
Just install CM11 zip from recovery. That is if the phone is I9070, and not I9070P.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Just install CM11 zip from recovery. That is if the phone is I9070, and not I9070P.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
i don't understand what you say plz give me better solution for this.....
saha.gobinda89 said:
i don't understand what you say plz give me better solution for this.....
Click to expand...
Click to collapse
Well, now can I ask? Is your device is Galaxy S Advance GT-I9070 series (not GT- i9070P series - NFC supports)? And has installed the official firmware 4.1.2+ (jelly bean)?
If your device is GT-I9070, and has installed the first official firmware 4.1.2+ (jelly bean). Then simply you do the installation via CWM Recovery which is certainly already installed on your device. after all these, then you can feel the sweetness of chocolate kitkat (CM11) style developers. Like what was mentioned by senior @shut_down before.
TPD-21 said:
Well, now can I ask? Is your device is Galaxy S Advance GT-I9070 series (not GT- i9070P series - NFC supports)? And has installed the official firmware 4.1.2+ (jelly bean)?
If your device is GT-I9070, and has installed the first official firmware 4.1.2+ (jelly bean). Then simply you do the installation via CWM Recovery which is certainly already installed on your device. after all these, then you can feel the sweetness of chocolate kitkat (CM11) style developers. Like what was mentioned by senior @shut_down before.
Click to expand...
Click to collapse
Yes, My device is Galaxy S Advance GT-I9070, 16 GB And has installed the official firmware 4.1.2+ (jelly bean). can you give proper download link kitkat (CM11) and give whole process by CWM method for install kitkat 4.4.2 or update version in my device.
saha.gobinda89 said:
Yes, My device is Galaxy S Advance GT-I9070, 16 GB And has installed the official firmware 4.1.2+ (jelly bean). can you give proper download link kitkat (CM11) and give whole process by CWM method for install kitkat 4.4.2 or update version in my device.
Click to expand...
Click to collapse
Look for CM11 bt TeamCanjica in original development section, put it in sd card, boot to recovery and install it with "update from external storage" or qhatever it was in stock recovery. Do factory reset and that should be it. If still not working go to cwm and wipe dalvik cache.
Sent from my GT-I9070
saha.gobinda89 said:
Yes, My device is Galaxy S Advance GT-I9070, 16 GB And has installed the official firmware 4.1.2+ (jelly bean). can you give proper download link kitkat (CM11) and give whole process by CWM method for install kitkat 4.4.2 or update version in my device.
Click to expand...
Click to collapse
Sorry I'm late replying. Yes, do as senior @shut_down mentioned above.
÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷
Sent From Glonass Satellite
÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷
kitkat install
shut_down said:
Look for CM11 bt TeamCanjica in original development section, put it in sd card, boot to recovery and install it with "update from external storage" or qhatever it was in stock recovery. Do factory reset and that should be it. If still not working go to cwm and wipe dalvik cache.
Sent from my GT-I9070
Click to expand...
Click to collapse
please give me download link CM11 or kitkat 4.4.2 install software.
saha.gobinda89 said:
please give me download link CM11 or kitkat 4.4.2 install software.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2578599
thanks
shut_down said:
http://forum.xda-developers.com/showthread.php?t=2578599
Click to expand...
Click to collapse
Thanks Man....
Kitkat rom
shut_down said:
http://forum.xda-developers.com/showthread.php?t=2578599
Click to expand...
Click to collapse
which one is best for Samsung galaxy S advance Cyanogenmod_Kitkat ROM or Omni_Kitkat ROM Please tell me and which is battery support will be good. if think that any of them one good then give me download link. pls help me.
saha.gobinda89 said:
which one is best for Samsung galaxy S advance Cyanogenmod_Kitkat ROM or Omni_Kitkat ROM Please tell me and which is battery support will be good. if think that any of them one good then give me download link. pls help me.
Click to expand...
Click to collapse
You should try yourself. It depends on your usage. And there is no such thing as best rom. You have our development and original development sections and look there.
Sent from my GT-I9070
looking for kitkat
shut_down said:
You should try yourself. It depends on your usage. And there is no such thing as best rom. You have our development and original development sections and look there.
Sent from my GT-I9070
Click to expand...
Click to collapse
where i looking.... give me download link...