I have an ATT unlocked s3 so what are the setting i need to run it on t mobile network i talked to a sales rep and he told me it would only be 2g when i switch and they add all that to the phone when i switch over... thats little weird to me any suggestions?
Look here
http://bit.ly/17rurEA
Use it next time, and post in correct forum
Yea this isn't the galaxy s forum man so we wouldn't know.
Sent from my PACMAN MATRIX HD MAXX
Related
I have flashed the uro rom of the galaxy tab on a us sgh-1987 att samsung tab , i inserted my at&t sim card and it will not allow me to make calls . Can some point me in the right direction to fix this. The at&t sim card i am using has voice and data. Or have i not done something properly.
You need to be using a different modem than the one included in the Euro rom. I believe either the Bell Canada or Rogers modems should work to enable voice on ATT. I'm using the Euro JMI rom with the Bell JK5 modem and it works fine for me.
See here: http://forum.xda-developers.com/showthread.php?t=847273
I followed the instructions and for some odd reason the sim that came with my samsung is the only one that will work even though my phone is unlocked and i am using another att sim card that has voice and data.
And when i go to check wireless settings it keeps me me in flight mode.
Using JMIv2 here. Just made a call -- seems fine.
I full flashed JMIv2 over top of JMEv4.
Your not doing something correct.
Also please post in the correct subforum. This in no way has anything to do with android development. This belongs in general. Read much??
Sent from my MoDaCo powered Galaxy Tab.
Pls change the title of your post. It's completely baseless, and it's obvious you did something wrong. Thanks!
mistadman said:
Pls change the title of your post. It's completely baseless, and it's obvious you did something wrong. Thanks!
Click to expand...
Click to collapse
How so? Its clearly a question, he has a question mark after the million exclamation marks...
Sent from zombie infested Gingerbread.
rushstatus1 said:
I have flashed the uro rom of the galaxy tab on a us sgh-1987 att samsung tab , i inserted my at&t sim card and it will not allow me to make calls . Can some point me in the right direction to fix this. The at&t sim card i am using has voice and data. Or have i not done something properly.
Click to expand...
Click to collapse
Weren't you on other threads contradicting people about 3g+ voice using service menus?
I am confused about your setup - what model tab? I thought you had t-mobile tab.
Anyway, on an at&t tab use the bell i9000 modem. Check your apn and network mode afteryou reboot.
The iemi blocking by t-mobile stops people from using data.
And besides clubtech does a perfect write up to get everything working. SEARCH IS YOUR FRIEND.
Good point!
Thank you
i appreciate the advice in pointing me in the right direction. but it seems like a lot of you aren't very newbie knowledge friendly. i posted what i was experiencing in the hopes of getting a point in the right direction. not a solution. turns out my Sim card was corrupted. all i had to do is go and grab a new one. i apologize if my question seemed too basic and trivial to you . but it turns out that i just made a logical investigative approach to my problem . I followed rotos guide to the letter so i assumed that AT&T had also latched on to the idea of imei blocking. I have done several apps for the android market ,and am constantly wanting to learn more . some of you have great skill sets but no patience for new comers. but all in all i will not post in the forum anymore if it involves being downgraded for simply asking for help, isn't this why we have forums for the techs the geeks the cpu nerds. who would have thought amongst intelligent people we still deal with aristocracy .
i did have a t-mobile tab and then returned and bought att tab and it works just fine now . like i said in the forum i am learning so please bear with me
Aristocracy has and will always be common among us nerds blame it on our our societal influences.
Regardless of that, people are more upset about you not searching the forum/threads. Please use the search option , it will save us all time and wasted bandwidth. Also post in the correct sub forum. This section is meant for what it was named for, development only. There is a general/ Q&A section.
Once again, I can't stress the search feature enough. It will seriously help. I promise.
Not flaming you, just trying to help direct you
i appreciate it thank you
hey guys im on roto's v4 and it works for both tmous and att
These reps are like super not helpful with something as simple as porting a number, if anyone works at ATT and browses this forum please lemme, I could use some help from someone intelligent...
I'm not an ATT rep just trying to give some advice but:
If no one responds try the ATT forums, I often see replies by reps, and if you want to stay on Xda try the ATT gnote forum, I feel like there might be more reps over there since they can get it from ATT now.
eikiel said:
I'm not an ATT rep just trying to give some advice but:
If no one responds try the ATT forums, I often see replies by reps, and if you want to stay on Xda try the ATT gnote forum, I feel like there might be more reps over there since they can get it from ATT now.
Click to expand...
Click to collapse
I'll take a look, thx
best off posting in the AT&T section rather than the international note section
I'm a rep, what do you need
JFizDaWiz said:
I'm a rep, what do you need
Click to expand...
Click to collapse
PM'd .
Sorry I'm not trying to bring back this thread but I found a D3 at my work that looks like its repairable but they'll scrap out. Me and my fiancee are on at&t and she's needing a new phone so I was wondering if anyone ever got the work around to throw a sim from another us carrier into this bad boy. Sorry for posting in development I didn't see a Q&A section. Thanks forum!
droidnamedjakke said:
Sorry I'm not trying to bring back this thread but I found a D3 at my work that looks like its repairable but they'll scrap out. Me and my fiancee are on at&t and she's needing a new phone so I was wondering if anyone ever got the work around to throw a sim from another us carrier into this bad boy. Sorry for posting in development I didn't see a Q&A section. Thanks forum!
Click to expand...
Click to collapse
Yes there is a thread here in the dev section with a walk through for that
Sent from my XT860 using xda premium
look 3 posts down, there is guide to unlock d3 for att
Wow, I'm an idiot. I didn't see it apparently but I was skimming through the threads quickly at work. My mistake! Cheers.
Sent from my HTC One X using xda premium
Hello Everyone,
I'm not forum savvy so I'll just start by asking a question that's been bothering me and haven't found a solution yet. A friend of mine told me you guys at xds-developers were probably my best bet at getting a quality answer, esp if I contribute in ways that are helpful.
Here's the problem>>>
I bought an Android at a pawn shop(excellent conditon so I figure why not, I need to start somewhere with these smart phones)
It's the Samsung Galaxy S1 Captivate SGH-i897
It says AT&T on it, I'll upload a picture to be sure
So I call AT&T and they gave me the unlock code so I can go through airfire mobile
note:at the time I was pressed for funds and needed a cheap provider
I can do many things with this phone, but for some reason I CANNOT send MMS(multi-media messages such as pix, short video clips, song tracks, etc.) I figure this out right away, so I went ahead and "Rooted" the phone. It was done right. Anyways, "Same problem" still cannot send
multimedia messages. Now in the Access Point Names(APN) I configured airfires APN, but I noticed that there is another APN(not checked, but it says T-MOBILE US 310 640(epc.tmobile.com) under the airefire APN.
That is all the information I have concerning this, but I have been asking airfire mobile, t-mobile, and AT&T questions concerning this and none of them will give me a solid answer for troubleshooting this matter.
Is there anyone on here that can assist me with this? If you need any more info concerning this, just ask, I would really like to resolve this issue
because this phone is supposed to send MMS messages and it isn't. I'd LOVE to hear some good news, but if nothing can be done about it, I guess I'll just sell the phone and try another phone, but picture texting is important to me as with some people, probably more important than most things with this phone. Thanks for reading this and perhaps taking the time to give me a helping hand.
wrong forum bro... smh this is really happening a lot to the HTC ONE threads.
I still don't understand how they manage to start a topic in a wrong forum. You have to go into the device forum before posting. So how?
Sent from my HTC Mytouch 4g using xda premium
Not sure how you can post in a HTC forum when you have a Samsung device.
Sent from my Nexus 4 using xda premium
Hi first of all I would like to thank you in advance for your help i can feel I made the right decision to post here Im kinda a newbieat android devices amd happends that my aunt gave me this Motorola Droid Bionic in 4.1.2 JB and I was wondering if there any way to use it in the Philippines with a Philippine GSM carrier, I know that this phone is a CDMA from verizon and I had done some browsing and found out that the GSM caoability of the device is plausible Im currently using a GSM network provider right now, is it possible for me to use it here in the Philippines and what should I do? or what are the steps and which threads should I read im not really an android guy buy im willing to learn )) thank you so much
KMTanaka said:
Hi first of all I would like to thank you in advance for your help i can feel I made the right decision to post here Im kinda a newbieat android devices amd happends that my aunt gave me this Motorola Droid Bionic in 4.1.2 JB and I was wondering if there any way to use it in the Philippines with a Philippine GSM carrier, I know that this phone is a CDMA from verizon and I had done some browsing and found out that the GSM caoability of the device is plausible Im currently using a GSM network provider right now, is it possible for me to use it here in the Philippines and what should I do? or what are the steps and which threads should I read im not really an android guy buy im willing to learn )) thank you so much
Click to expand...
Click to collapse
As far as I can tell, all you need to do is replace the SIM card that works for your carriers over there. Hpe that helps.
Try the sim of not you need to modify the radio config
KMTanaka said:
Hi first of all I would like to thank you in advance for your help i can feel I made the right decision to post here Im kinda a newbieat android devices amd happends that my aunt gave me this Motorola Droid Bionic in 4.1.2 JB and I was wondering if there any way to use it in the Philippines with a Philippine GSM carrier, I know that this phone is a CDMA from verizon and I had done some browsing and found out that the GSM caoability of the device is plausible Im currently using a GSM network provider right now, is it possible for me to use it here in the Philippines and what should I do? or what are the steps and which threads should I read im not really an android guy buy im willing to learn )) thank you so much
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2257993