Related
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
cyberdeception said:
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
Click to expand...
Click to collapse
Just flash Hydracore kernel and you will be good to go for flashing any custom rom.
cyberdeception said:
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
Click to expand...
Click to collapse
Take it easy, you're fine. If you've installed HydraCore it means you're on a safe kernel. Just download pc Odin if you haven't already.
What rom do you want to go to? I'd recommend for safest operation, install gb stock, then look at upgrade but it depends on which rom you want to flash.
Emmc bug is only triggered on stock kernels or under some cwm flashes which most people don't do, so take it easy, you're ok.
Sent from my GT-N7000 using xda app-developers app
cyberdeception said:
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
Click to expand...
Click to collapse
1. Flash hydracore kernel.
2. Reboot recovery.
3. Make sure you are on hydracore kernel.
4. Do what ever you want.
If you still being scare of doing this. Just follow jeetu suggestion. Go back to gb pre rooted rom by using pc odin. Then use mobile odin to flash rooted kernel. After get full root, go recovery and flash cm9. Done.
Sent from my GT-N7000 using xda premium
Re
Thanks for the clarity...
one more thing..
I am now flashing the kernel as we speak to hydracore..
Will i lose root if i need to install the ParanoidAndroid rom..
If not..do i need to go the whole way of installing stock GB and then rooting it and then installing the paranoid rom!..
really appreciate the help friends!..
cyberdeception said:
Thanks for the clarity...
one more thing..
I am now flashing the kernel as we speak to hydracore..
Will i lose root if i need to install the ParanoidAndroid rom..
If not..do i need to go the whole way of installing stock GB and then rooting it and then installing the paranoid rom!..
really appreciate the help friends!..
Click to expand...
Click to collapse
Flashing Hydracore doesn't affect root, you will be rooted and can flash PA directly using cwmr after flashing hydracore.
cyberdeception said:
Thanks for the clarity...
one more thing..
I am now flashing the kernel as we speak to hydracore..
Will i lose root if i need to install the ParanoidAndroid rom..
If not..do i need to go the whole way of installing stock GB and then rooting it and then installing the paranoid rom!..
really appreciate the help friends!..
Click to expand...
Click to collapse
I would recommend you go with the long route of installing stock GB first. I saw the installation instructions of PA (i'm not sure though if that's an outdated tutorial or if it's still the current one to date), but it explicitly tells you that you need to be on stock GB before installing PA. I'm open to corrections though from those who have PA already installed but personally,it would be good if you start from scratch and work your way up to eventually install PA.
That's just my advice to you.
Hi,
I got a question, I have flashed the kernel to the hydracore one, have root and CWM but I am still on the ICS stock ROM. Is it possible to go directly to paranoid one without the need to downgrade to GB ?
By the way, can you provide a link to dl paranoid ?
Thank you in advance for your answer.
zone.art said:
Hi,
I got a question, I have flashed the kernel to the hydracore one, have root and CWM but I am still on the ICS stock ROM. Is it possible to go directly to paranoid one without the need to downgrade to GB ?
By the way, can you provide a link to dl paranoid ?
Thank you in advance for your answer.
Click to expand...
Click to collapse
Yeah you can flash paranoid straight... Download GApps and the rom from original development section.. Remember perform all the wipes before flashing
Enviado desde mi GT-N7000 usando Tapatalk 2
Deleted
msedek said:
Yeah you can flash paranoid straight... Download GApps and the rom from original development section.. Remember perform all the wipes before flashing
Enviado desde mi GT-N7000 usando Tapatalk 2
Click to expand...
Click to collapse
Ok but as I can see the ROM is only 160 MB as other ROM (stock for example are almost 700MB), I don't want to lose some essential functionalities by flashing to an incomplete ROM. How to know which file to dl from the Gapps is there on this one that you have the 500 MB missing ?
Thanks again and sorry for my poor knowledge
All aosp roms are that size.. It's a completely different experience as aosp roms are pure Google experience with no Samsung or any other retailers custom launcher and bloat..
It depends on Wich functionalities do you have in mind?
Enviado desde mi GT-N7000 usando Tapatalk 2
Ok thanks so they put a lot of useless heavy crap inside I guess
I am still struggling to have a download link for a stable zip file to flash, is it possible to have a link ?
Thank you
I've downloaded the rom in the past no issues.. Don't know about mirrors.. Maybe ask there in the ParanoidAndroid threat
Enviado desde mi GT-N7000 usando Tapatalk 2
Hi guys,my uncle has i9000 international version running android 2.3.3 stock rom but it slow.
1.Can someone give a link of a tutorial how to root and install recovery like CWM or TWRP?
2.What are the main bugs with ics and jb roms?
3.What is the best recovery?
4.What is the fastest GB rom that has no bugs?
cistamlaka said:
Hi guys,my uncle has i9000 international version running android 2.3.3 stock rom but it slow.
1.Can someone give a link of a tutorial how to root and install recovery like CWM or TWRP?
2.What are the main bugs with ics and jb roms?
3.What is the best recovery?
4.What is the fastest GB rom that has no bugs?
Click to expand...
Click to collapse
Answer to no.4 Gamerzrom v11
1. Follow this thread forum.xda-developers.com/showthread.php?t=1102881
2. For me battery drain, other work well
3. Best recovery? You means recovery mode? For me cwm
4. No idea using Ics
Sent from my GT-I9001 using xda app-developers app
cistamlaka said:
Hi guys,my uncle has i9000 international version running android 2.3.3 stock rom but it slow.
1.Can someone give a link of a tutorial how to root and install recovery like CWM or TWRP?
2.What are the main bugs with ics and jb roms?
3.What is the best recovery?
4.What is the fastest GB rom that has no bugs?
Click to expand...
Click to collapse
Hi,
2. I have a little camera issues especially with the video (low quality etc.)
3. Im using CMW
4. Never used Gb rom.... only ICS and JB
Sent from my GT-I9000 using xda app-developers app
cistamlaka said:
Hi guys,my uncle has i9000 international version running android 2.3.3 stock rom but it slow.
1.Can someone give a link of a tutorial how to root and install recovery like CWM or TWRP?
2.What are the main bugs with ics and jb roms?
3.What is the best recovery?
4.What is the fastest GB rom that has no bugs?
Click to expand...
Click to collapse
this vid shows how to get root and then install another rom of your choice...
http://youtu.be/emmjfye2Sdk
hope it helps...
cistamlaka said:
Hi guys,my uncle has i9000 international version running android 2.3.3 stock rom but it slow.
1.Can someone give a link of a tutorial how to root and install recovery like CWM or TWRP?
2.What are the main bugs with ics and jb roms?
3.What is the best recovery?
4.What is the fastest GB rom that has no bugs?
Click to expand...
Click to collapse
Hi cistamlaka, be aware that it is your uncle's phone, not yours. So I would be very careful on rooting and upgrading to a different rom. If he is on a stock 2.3.3, I think (because I had it) there is an update to 2.3.6. It fixes a couple of lags.
If you root him the phone and push some new rom onto it, he might be confused because he will lose the TouchWiz and some applications. Check first with him, what applications (and if some Samsung-made) he uses and if he is okay to change the looks of the phone.
Isnt it right that he has only to download a file and change it to "update.zip" to flash it via stock recovery? A friend of me needs that file, is it the same to use as on sgs plus (i9001)?
Greets
Sent from my Xperia X10 using xda app-developers app
keenofhiphop said:
Isnt it right that he has only to download a file and change it to "update.zip" to flash it via stock recovery? A friend of me needs that file, is it the same to use as on sgs plus (i9001)?
Greets
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
I have s plus and it is so easy to root,install custom recovery and rom.I install cm10 on it for 5 mins when it is on stock
nameh said:
Hi cistamlaka, be aware that it is your uncle's phone, not yours. So I would be very careful on rooting and upgrading to a different rom. If he is on a stock 2.3.3, I think (because I had it) there is an update to 2.3.6. It fixes a couple of lags.
If you root him the phone and push some new rom onto it, he might be confused because he will lose the TouchWiz and some applications. Check first with him, what applications (and if some Samsung-made) he uses and if he is okay to change the looks of the phone.
Click to expand...
Click to collapse
the problem is that usb doesnt work (he will fix it) but the charging works.For update do I have to use kies or OTA if it is possible?
:good::fingers-crossed:
Hello,
So after getting some knowledge of the things (thanks Shut_Down :good, I was wondering which is the best combination for this phone?
Right now I am running the stock ROM and kernel.
Will the new official JB upgrade also change kernel or just ROM?
Since people here have already tried different combinations, which combinations have you found that give good, consistent and fast running?
Thanks!
R: [Q] Best Kernel / Rom combination for the I9070
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium
KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
chucky-bean v5 + cocore-E 2.9 nighly(CWM)
Chucky Bean v6; Cocore_E 2.9 CWM
Envoyé depuis mon GT-I9070
Well, I did't expect this...
Thanks for your replys!
Funny thing is that each of you have a different combination.
Any one actually did testing which combo is better? Or maybe i sould ask, why are you using he combinations you wrote?
KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Click to expand...
Click to collapse
Same here. Stock JB LQ4 + ThunderZap 3.5.
So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!
Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!
Click to expand...
Click to collapse
Try both and see what firs you better. And about order, you can install ROM with temp. CWM, but I suggest you use permanent, with custom kernel. So first kernel, than ROM.
Sent from Galaxy S Advance
Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?
YMatrix said:
Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?
Click to expand...
Click to collapse
Hm, on this Russian JB there is no Hebrew as I see. So if you want it you should wait for release for your country or any with your language.
shut_down said:
Hm, on this Russian JB there is no Hebrew as I see.
Click to expand...
Click to collapse
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language
YMatrix said:
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language
Click to expand...
Click to collapse
we actually have the ROM in our phone bro!
Brainiac.shri said:
we actually have the ROM in our phone bro!
Click to expand...
Click to collapse
You mean that each ROM usually supports all the languages?
YMatrix said:
You mean that each ROM usually supports all the languages?
Click to expand...
Click to collapse
a lot. but in this case hebrew isnt listed sorry!
Before installing a ROM is there an option to view which languages it supports?
Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
Before installing a ROM is there an option to view which languages it supports?
Click to expand...
Click to collapse
No, unless dev write it on its thread.
Sent from Galaxy S Advance
OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?
YMatrix said:
OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?
Click to expand...
Click to collapse
roms only.
Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..
Одг: [Q] Best Kernel / Rom combination for the I9070
Rahul125125 said:
Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2100642
Sent from Galaxy S Advance
Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
Click to expand...
Click to collapse
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
Edit: ops I just saw you're not Italian
Click to expand...
Click to collapse
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
ThaiDai said:
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
Click to expand...
Click to collapse
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Thanks
Bad-Pixel said:
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for the answer ! I just installed successfully the Italian version of JB !
PD: No, i'm from Buenos Aires, But i'm an Italian Citizen, i have double citizenship...
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I will keep that in mind... But i want to install CM10.1 in mi N7000, my cousin(he has a Galaxy S3 with Philz 4.88.5 and CM10.1) he recommended it to me... I really want the performance/interface given by CyanoGen Mod...
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
Click to expand...
Click to collapse
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Really? Maybe i read wrong ! But there is written that Philz 4.88.5 supports CM10.1 and GT-N7000...
Read This thread http://forum.xda-developers.com/showthread.php?t=2002953
Someone in http://www.Taringa.net recommended me to use Crash Rom with Philz kernel ! And not only one person did that !
What Do You Think? I'm very confused about Android(Kernel/Rom/Recovery)...
PD: I really miss my iPod Touch 4g ! iOS it's heaven for me hahahaha
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
But dude, that topic is about the galaxy s3 (i9300) and talking about a custom recovery (with few words, the menu from where you install new roms or wipe your note) and not about a kernel. Plus, Dev Crash left our note community some months ago, and his last rom is a jb leak rom Samsung, so I don't recommend you to install it. It's too much old now. Btw, if you wanna some advice about all this story (kernel recovery and other maybe) I advice you to:
First search for some already opened thread, and if you will not any answer to your questions, open a new thread
Sent from my GT-N7000 using xda premium
Auch ! Sorry man ! I had a confusion !
But if you read the Thread there says that it's compatible with N7000... So, i can install Philz 4.88.5 Recovery on my Note !
Reading in the web i found a tutorial of the CM10.1 Official for N7000, i think i will use this ROM in my Note ! What do you think? Any advice?
In the page of CM i found the tutorial... I can't put the link here...
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
Click to expand...
Click to collapse
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
nokiamodeln91 said:
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
Click to expand...
Click to collapse
I said Philz Recovery... With CM10.1 ROM and Kernel !
which Philz recovery are you referring to ? Temp one?
nokiamodeln91 said:
which Philz recovery are you referring to ? Temp one?
Click to expand...
Click to collapse
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
MarianoQT said:
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
Click to expand...
Click to collapse
Dont you read? Phil touch recovery + stock kernel is only for touchwiz rom a.k.a stock rom. No cm9 no cm10 or cm10.1. If im not mistaken speedmod kernel is using phil recovery but no touch features it also for stock touchwiz rom. Correct if im wrong
Sent from my GT-N7000 using xda premium
struk in boot
Bad-Pixel said:
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
altanole said:
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
Click to expand...
Click to collapse
Ok resolved
I installed philzkernal matching to my rom via Odin and now is all fine
Sent from my GT-N7000 using xda app-developers app
Hi, i am noob i need a help for upgrade and root my phone.
I am from Serbia and I have this phone I9070, Gingerbread 2.3.6 I9070XXLK2 and Kernel is 2.6.35.7-1211579
I want o backup my original kernel.
And how to upgrade on JB 4.1.2 + root + custom kernel, I heard that the i9070 works poorly on JB and has bugs and custom kernel can fix that i think
Which is the best version of JB for stability and performance without lag and bugs? Stock or custom?
Which is the best kernel for my I9070?
And how to root my phone?
Thanks
Myl0sh said:
Hi, i am noob i need a help for upgrade and root my phone.
I am from Serbia and I have this phone I9070, Gingerbread 2.3.6 I9070XXLK2 and Kernel is 2.6.35.7-1211579
I want o backup my original kernel.
And how to upgrade on JB 4.1.2 + root + custom kernel, I heard that the i9070 works poorly on JB and has bugs and custom kernel can fix that i think
Which is the best version of JB for stability and performance without lag and bugs? Stock or custom?
Which is the best kernel for my I9070?
And how to root my phone?
Thanks
Click to expand...
Click to collapse
Hello. I am from Serbia too, and there is another user with same name as you. I will send you on private message what to do. Tomorow evening. Just remind me. And you can ask me whatever you want. We have official JB firmware. With CoCore kernel it is good. And i will suggest you to use CM10.1 or Omni ROM.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Hello. I am from Serbia too, and there is another user with same name as you. I will send you on private message what to do. Tomorow evening. Just remind me. And you can ask me whatever you want. We have official JB firmware. With CoCore kernel it is good. And i will suggest you to use CM10.1 or Omni ROM.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I send private message on you, but in my folder "sent items' have 0 messages. PM work in this forum?
Myl0sh said:
I send private message on you, but in my folder "sent items' have 0 messages. PM work in this forum?
Click to expand...
Click to collapse
Yes.. PM system works in this forum..
- You can send it again for confirmation, I'm sure shut_down won't mind
- There is an option to either save or not save your sent messages.. so maybe its set to "don't save"
Sent from my Calculator using XDA Premium
When I upgrade my android, did I need to calibrate battery, compass, or something? I read somewhere, some user have bad GPS signal in JB. My GPS signal on GB 2.3.6 is excellent. I dont want to lose my perfect GPS
Thanks
Myl0sh said:
When I upgrade my android, did I need to calibrate battery, compass, or something? I read somewhere, some user have bad GPS signal in JB. My GPS signal on GB 2.3.6 is excellent. I dont want to lose my perfect GPS
Thanks
Click to expand...
Click to collapse
Its not necessary.. I never did that and yet I've never experienced any issues like that.. you are only required to do it if in case you experience those issues..
Sent from my Calculator using XDA Premium
I successfully install JB and i use HarshJelly ROM v4.01
How can i fix Live wallpaper not working on HarshJelly ROM v4.01?
http://forum.xda-developers.com/showthread.php?t=2342314
I can't replay there coz i have only 4 posts
Thanks
Myl0sh said:
I successfully install JB and i use HarshJelly ROM v4.01
How can i fix Live wallpaper not working on HarshJelly ROM v4.01?
http://forum.xda-developers.com/showthread.php?t=2342314
I can't replay there coz i have only 4 posts
Thanks
Click to expand...
Click to collapse
I tried to set a live wallpaper on my phone , it is working, im on harshjelly 4.0 too. What kind of issues you have?
I always used well jelly bean with CoCore 8.2 kernel and ROM deodex without any locking
Charles Augusto said:
I always used well jelly bean with CoCore 8.2 kernel and ROM deodex without any locking
Click to expand...
Click to collapse
[email protected] said:
I tried to set a live wallpaper on my phone , it is working, im on harshjelly 4.0 too. What kind of issues you have?
Click to expand...
Click to collapse
I use CoCore 8.2 to.
Here is error..see screenshot
I did not install any live wallpaper coz i want to use stock live wallpaper.
Now i update my SGSA with CoCore 8.6 and update HarshJelly ROM v4.01 to V5 and i have same error
Myl0sh said:
Now i update my SGSA with CoCore 8.6 and update HarshJelly ROM v4.01 to V5 and i have same error
Click to expand...
Click to collapse
Have you done wipe cache and wipe dalvik cache?
shut_down said:
Have you done wipe cache and wipe dalvik cache?
Click to expand...
Click to collapse
I did wipe cache and wipe Dalvik cache and i have same error.
I just install live wallpaper from goole play and error is fixed