Related
First off some details about my phone:
LG GT540 T-Mobile UK
1.6 donut
When I connect my phone to the computer, the phone and the computer do recognize it (but only as a storage device once I have mounted it). I have installed the drivers for the phone (I have tried on 3 different computers). KDZ firmware updater does not find my phone with this error:
[R&D Test Tools Log File]
17:33:42 : Launching SW update
17:33:42 : Unpacking KDZ
17:33:49 : KDZ file extraced
17:33:54 : Files were extracted.
17:33:54 : LGMobileDL Load.
17:33:54 : Port = -1
17:33:54 : Connecting to phone
17:33:54 : PHONE WAS NOT FOUND!
17:33:56 : ===FINISHED===
Lg mobile support tool does not even find it at all. I have googled and have found nothing that can help me.
Oh, i am using the kindle USB cable as well (should still work though, right?)
English kdz? Android lg modem turned off?
Sent from my GT540 using Tapatalk
What should it matter about the language of my KDZ when it can't even find my phone?
And what lg Modem?
Install PC suite Drivers while phone is not pluged into usb.
It is matter, 4 russian U need 'windows enabler' 4 english not xd - is better. Lg android modem have to be off in system settings.
Sent from my GT540 using Tapatalk
Ah, sorry i thought you meant the kdz file, no i am using the english version. also mobile system settings or windows system setting?
LG pc Suite wor- OH GOD IT WORKS THANK YOU!
Windows (devices manager) can't find rigth word. Off also antivirus/firewall protection be4
Sent from my GT540 using Tapatalk
hogofwar said:
First off some details about my phone:
LG GT540 T-Mobile UK
1.6 donut
When I connect my phone to the computer, the phone and the computer do recognize it (but only as a storage device once I have mounted it). I have installed the drivers for the phone (I have tried on 3 different computers). KDZ firmware updater does not find my phone with this error:
[R&D Test Tools Log File]
17:33:42 : Launching SW update
17:33:42 : Unpacking KDZ
17:33:49 : KDZ file extraced
17:33:54 : Files were extracted.
17:33:54 : LGMobileDL Load.
17:33:54 : Port = -1
17:33:54 : Connecting to phone
17:33:54 : PHONE WAS NOT FOUND!
17:33:56 : ===FINISHED===
Lg mobile support tool does not even find it at all. I have googled and have found nothing that can help me.
Oh, i am using the kindle USB cable as well (should still work though, right?)
Click to expand...
Click to collapse
Hi i downloaded the ZIP file when i try to Unzip it my McAfee anti virus found 2 virus in that file and deleted those files
1.EnablerDLL.dll
2.Windows Enabler.exe
After that i tried to run the .BAT file and i tried to ROOT my phone then it is saying no device found wat to do ??
I got da same log two hours past use english version of KDZ! Is so much better.
http://forum.xda-developers.com/showthread.php?t=810271
Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist", disbale Modem Driver. Dont boot with USB cable. Put the cable into the phone _after_ boot in downloadmode.
Close all Antivir programms!
ANd it has stopped working again, i followed all teh steps i did before and it refuses to find the phone.
keep trying different things like put it in download mode and try that.
How do i put the gt540 into download mode.
Vol up + Camera and power on
please help guys,
ri8 now m on CM7,
but,want to get back to the stock stage(2.2.2) v10b
i've tried NVflash and smartflash as well,
nothing has worked
is there any other way to get the stock rom back.
(i do have the stock rom back ups but through CWM is denying the restore comand...shows md5 doesnt match)
Try the modaco roms, those can be flashed from recovery n are based on official roms so they are definitely stable
Sent from my LG-P990 using XDA App
hey thanx mate...
yeahh...even i was about to opt for that...
but the thing is i am not sure weather CWM will be able to flash them...
which modaco would u suggest???
and one more thing,after 20 trials of 'smartflash' 21st has worked...it showed the msg 'download complete' after 3 minutes and has rebooted itself !!!!
but,when i insurt the battery and restart it my CM7 was still there !!!! :-O
I flashed back to the original rom, downloaded the original stock rom from this forum.
Sent from my LG-P990 using Tapatalk
The only modaco Rom tt you can get off modaco is the vanilla version. You can also get edited modacos off xda, I'm using 1 now myself but I can't remember which
Also on this Rom I can't run plants vs zombies, I'm considering to go back to cm7 currently
Sent from my LG-P990 using XDA App
Why are you unable to use nvflash?
(assuming you're using windows vista or windows 7)Instead of just running flash.bat directly, have you tried running it from a command prompt? To open command prompt on the nvflash folder, hold down shift, right click and select open command window here. then run flash.bat and post your error message if you get any.
I also assume you have correct drivers installed (check device manager).
If you are connecting the phone via usb hub, front panel or extension cable, connect it directly to a back panel usb port.
Is this the one you have used?
http://android.modaco.com/content/l...rom-release-v10b-dated-1300166062-15-03-2011/
lozza69er said:
I flashed back to the original rom, downloaded the original stock rom from this forum.
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
Did you use smartflash?
Sent from my LG-P990 using Tapatalk
Sckank said:
Did you use smartflash?
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
Yep I used smartflash on my windows xp laptop.
Sent from my LG-P990 using Tapatalk
Stikkontakt said:
Why are you unable to use nvflash?
(assuming you're using windows vista or windows 7)Instead of just running flash.bat directly, have you tried running it from a command prompt? To open command prompt on the nvflash folder, hold down shift, right click and select open command window here. then run flash.bat and post your error message if you get any.
I also assume you have correct drivers installed (check device manager).
If you are connecting the phone via usb hub, front panel or extension cable, connect it directly to a back panel usb port.
Is this the one you have used?
http://android.modaco.com/content/l...rom-release-v10b-dated-1300166062-15-03-2011/
Click to expand...
Click to collapse
Stikkontakt,
yes mate...thats xactly wht i downloaded.
i am on windows XP...
Revert back to ext3 and flash back You still on ext4
Sent from my LG-P990 using XDA App
Run cmd and cd into the nvflash directory.
or you can download "Open Command Window Here" powertoy from here: http://windows.microsoft.com/en-US/windows/downloads/windows-xp
and you will get an entry on folder right click menu to open a prompt on that folder.
Then run nvflash from cmd and post the results here if you get an error.
The reason why you should run it from cmd and not run the bat directly is that if it's not programmed to halt on error, it will just disappear without any notice. If you run it from cmd you will see any errors it will throw.
xmoo said:
Revert back to ext3 and flash back You still on ext4
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
I have nvflashed v10b after both cm7 and modaco fr17 without converting to ext3. I did it last time yesterday after completely bricking the whole system, even recovery.....
Stikkontakt said:
Run cmd and cd into the nvflash directory.
or you can download "Open Command Window Here" powertoy from here: http://windows.microsoft.com/en-US/windows/downloads/windows-xp
and you will get an entry on folder right click menu to open a prompt on that folder.
Then run nvflash from cmd and post the results here if you get an error.
The reason why you should run it from cmd and not run the bat directly is that if it's not programmed to halt on error, it will just disappear without any notice. If you run it from cmd you will see any errors it will throw.
Click to expand...
Click to collapse
thanx alot for this info...its very helpfull
though ri8 now i've updated my device to slik2X rom 'F' and have installed sence 3 !!!!
so far everything is fine and sence UI is lookin great,hope it'll stays this way,fingrs crossed !!!
thanx again,cheers
im new and can not figure out what is going on with this phone. ive tried to do whats listed here http://forum.xda-developers.com/showthread.php?t=1734330&page=8 but i can not get it to work. the "Erase entire CP" is grayed out. totally lost. this has been the worst android issue ive ran into that i couldnt fix
edit.... i was able to erase entire cp but now i'm getting stuck on step 5 restoring imei? no new device shows up when i do step 4... thanks for any help
Restoring IMEI
1. Connect phone by USB
2. Activate USB debug mode
3. Enter 3845#*920# in dialer if that doesn’t work try 3845#*925#
4. Select Port Settings -> Select CP Image Download
5. A new device should appear at let it install
6. Open Tutty and select serial protocol. Click on open
7. Type AT if response is not OK, change port number (it is possible that when typing you don’t see any letters)
8. Type at%imei, it should display a dummy IMEI
9. Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x where x,x,x... is your orginal IMEI number (found under the battery of your phone). It should response IMEI WRITE OK
10. Reboot phone
I just had the same thing. You need to make sure the right drivers are installed. Are you on GB or ICS?
Sent from my LG-SU760 using xda app-developers app
LeighR said:
I just had the same thing. You need to make sure the right drivers are installed. Are you on GB or ICS?
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
im on GB
Do you have the drivers installed? Is your phone detected correctly by your PC?
Sent from my LG-SU760 using xda app-developers app
where can i get tutty?
EDIT: i got tutty, com 4 and 5 dont work only com3 works, com3 command"at%imei" gives me error, and the phone switches from cp image download to cp usb
I have the same problem only my phone never lets me type anything at all into putty, but just like you no new device shows and it always goes back to cp usb.
I also cannot flash the phone unless using CWM. If I try to flash kdz or bin I always get stuck at waiting for IFX modem, if I try using the official lg mobile updater it the install always hangs at 15% and I get message saying phone is no longer connected to pc.
You open Tutty on your PC
Sent from my LG-SU760 using xda app-developers app
i wanted to update my lg optimus black to ics.
there is an official release but when i try it ota i get msg "connection failed caused by authentication error"
so i was going to update it using this method
http://www.android.gs/update-lg-optimus-black-p970-official-android-4-0-ics/
i installed lg suite on my pc
i downloaded the kdz file but it doesnt open just asks me to chose a program from list or one from the web. i chose lg suite & when i do lg suite itself opens but there is nothing to show the kdz (note i've been doing this without my phone connected via usb - do i need to have it connected before it will work?)
so i have no idea why its not working? or how i can get it to work?
the instructions say:
get the KDZ file.
Then, connect the handset with the computer by using its USB cord.
Now, from the computer run the KDZ executable file.
Up next, set “Type” and “Phone Mode” to select the .kdz file in your PC.
The update should now begin, so just wait and don’t make any other changes.
The process should take a couple of minutes.
In the end, remove the USB cord and reboot the phone.
can anyone help? ive no idea why what should be such a simple task is just not working :[
Use this program to download the correct kdz file for your device. Then use LGMDP to flash. KDZ updater should be a last resort, as it is less safe (you're more likely to brick your phone).
Search LGMDP here on XDA to see other threads, too.
:good::good:
It’s unofficial but it’s working. This CWM Recovery was posted by NormanD in the forum. And I give the credits to him and thanks to the effort for finally making CWM Recovery possible on LG Optimus L7. And now, the long wait is over. Here it is!
Download the tool
Instructions for installing CWM custom recovery on LG Optimus L7:
Download the attachment and unpack it in the root of your C: drive. It will create a folder C:\L7CWM.
Make you have ‘USB Debugging’ enabled. Phone should be in “Charge only” mode.
Plug your LG Optimus L7 to PC via USB cable.
Open the folder c:\L7CWM and run the file Flash_Bootloader.bat – this will unlock the bootloader and the phone should restart
Open again the same folder and run Flash_Recovery.bat – this will flash the new custom touch controlled recovery and phone should restart again.
If you want to use the recovery the simplest way – attached the phone via USB again and this time run Reboot2Recovery.bat file – the phone will restart, the LG logo will be displayed for a few seconds and the the phone will enter Recovery Mode.:laugh::laugh:
Where can i download it?
Enviado do meu GT-I9505 utilizando Tapatalk 4
soory for downloading link not given..
Sent from my LG-P700 using xda app-developers app
u can check the orginal normanD xda page
Sent from my LG-P700 using xda app-developers app
Then just redirect us to the page where NormanD posted it...
Kids these days.... if you post this for your thanks meter then, i won't press it since it's rendered useless.
ohh soory...i was lil busy these days..couldn't get time to surf too
Sent from my LG-P700 using xda app-developers app
u can get the link from http://forum.xda-developers.com/sho... from my LG-P700 using xda app-developers app
ArjunrambZ said:
u can get the link from http://forum.xda-developers.com/sho...E]
Why i can't enable "USB Debugging mode" ?
Click to expand...
Click to collapse
7thwarrior said:
Why i can't enable "USB Debugging mode" ?
Click to expand...
Click to collapse
Please b more specific,
ArjunrambZ said:
Please b more specific,
Click to expand...
Click to collapse
it's mention above that our phone should be on "charging only" and "Usb debugging mode must be enable". But I can't enable it in "Developer Option" section
7thwarrior said:
it's mention above that our phone should be on "charging only" and "Usb debugging mode must be enable". But I can't enable it in "Developer Option" section
Click to expand...
Click to collapse
Are you using STOCK rom?
7thwarrior said:
it's mention above that our phone should be on "charging only" and "Usb debugging mode must be enable". But I can't enable it in "Developer Option" section
Click to expand...
Click to collapse
you must first remove the USB cable and then select USB Debugging, then after you select it,tick USB debugging, it will work that way
LG Optimus CWM and Rooting
This will help you Rooting on LG L7 P700/P705 with almost any ROM running. :laugh:
Rooting:
Prerequisite
1. you must have your phone driver install, if you are a newbie install LG PC suite and connect you phone. LG System will do everything for you. :victory:
2. you must have brave heart!
ROOT IT!!
a. Download 'Cydia Impactor' from following links. Which every your system demands. i.e. windows,mac,linux and so on...
Download the thing from here: http://forum.xda-developers.com/showthread.php?t=2448085
you will find every step out there but, here is the short summary. :good::angel::angel:
b. extract it!
c. select the # drop SuperSU su to /system/xbin/su from drop down menu and click start
d. your done!!
e. restart your phone (after reboot you will not get any superuser app, you have to install it manually)
f. install your favorite SuperUser app from PlayStore, i.e. SuperSu, Superuser , etc. or google 'em you'll get lot of apps.
---------- Post added at 08:32 PM ---------- Previous post was at 08:23 PM ----------
Yeah, It's the way to install the recovery on your LG L7. (P700/P705)...
Here is the link to get the zip: http://forum.xda-developers.com/showpost.php?p=38231332
1. Download the attachment l7cwm.zip and unpack it in the root of your C: drive. It will create a folder C:\L7CWM.
2. Attach your L7 P700/P705 phone via USB cable. 'USB Debugging' option has to be active. Phone should be in "Charge only" mode.
3. Open the folder c:\L7CWM and run the file Flash_Bootloader.bat - this will unlock the bootloader and the phone should restart
4. Open again the same folder and run Flash_Recovery.bat - this will flash the new custom touch controlled recovery and phone should restart again.
5. If you want to use the recovery the simplest way - attache the phone via USB again and this time run Reboot2Recovery.bat file - the phone will restart, the LG logo will be displayed for a few seconds and the the phone will enter Recovery Mode.
P.S. : Extract all the files in C:\ drive only and run the script otherwise it will simply not work.
Not the best but it is a helpfull thread